path: root/tests/systemtests/sys_location/sys_location.qtt

/****************************************************************************
**
** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
** Contact: http://www.qt-project.org/legal
**
** This file is part of the Qt Mobility Components.
**
** $QT_BEGIN_LICENSE:LGPL$
** GNU Lesser General Public License Usage
** This file may be used under the terms of the GNU Lesser General Public
** License version 2.1 as published by the Free Software Foundation and
** appearing in the file LICENSE.LGPL included in the packaging of this
** file. Please review the following information to ensure the GNU Lesser
** General Public License version 2.1 requirements will be met:
** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain additional
** rights. These rights are described in the Nokia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU General
** Public License version 3.0 as published by the Free Software Foundation
** and appearing in the file LICENSE.GPL included in the packaging of this
** file. Please review the following information to ensure the GNU General
** Public License version 3.0 requirements will be met:
** http://www.gnu.org/copyleft/gpl.html.
**
** Other Usage
** Alternatively, this file may be used in accordance with the terms and
** conditions contained in a signed written agreement between you and Nokia.
**
**
**
**
**
**
** $QT_END_LICENSE$
**
****************************************************************************/

//TESTED_COMPONENT=src/location

testcase = {

    // \groups BAT,1.1,MOBILITY-65
    current_position: function()
    {
        // Test meta data
        testTitle = "Location - Current Position";
        testBinary = "weatherinfo_with_location";
        testSource = "$MOBILITYDIR/demos/weatherinfo";
        testGoal = "Verify that current position is detected and displayed.";
        testPreconditions = "Note that GPS connection is required for this test case";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | Verify that weather information for your local area is displayed |
        "));
    },

    // \groups BAT,1.1,MOBILITY-65
    location_is_updated: function()
    {
        // Test meta data
        testTitle = "Location - Location Updates";
        testBinary = "lightmaps_with_location (sources are in demos/lightmaps)";
        testSource = "$MOBILITYDIR/demos/lightmaps";
        testGoal = "Verify that location data is received and map is updated and centered after changing location.";
        testPreconditions = "GPS and internet connection is required for this test case";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally. Verify that map is displayed and centered with the current position. |
            | Move to a different location | Verify that map is updated and centered with new location |
        "));
    },

    // \groups BAT,1.2,QTMOBILITY-873
    third_party_position_source: function()
    {
        // Test meta data
        testTitle = "Location - Position Detection via Custom Plugin";
        testBinary = "testQtLocation"; // this is part of BlueWeel project, sources are in git@scm.dev.nokia.troll.no:qtmobility/qtmobility-tests.git
        testSource = "$MOBILITYDIR/tests/applications/location/testqtlocation";
        testGoal = "Verify that positions can be detected using third party plugins";
        testPreconditions = "GPS and internet connection is required for this test case";
        testGroups = "BAT_MOBILITY";
        testRequirements = "QTMOBILITY-873: Allow 3rd party position sources";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally |
            | Select the Custom Service | Verify that no 'Unable to register location service' and 'Not valid interface.' messages appear |
            | Press the Update Map button | Verify that map was loaded and correct current position is displayed |
         "));
    },

    // \groups BAT,1.2,QTMOBILITY-658
    shift_to_the_given_offset: function()
    {
        // Test meta data
        testTitle = "Location - Shift To Given Offset";
        testBinary = "testQtLocation";
        testSource = "$MOBILITYDIR/tests/applications/location/testqtlocation";
        testGoal = "Verify that coordinates can be calculated as an offset to another position.";
        testPreconditions = "None";
        testGroups = "BAT_MOBILITY";
        testRequirements = "QTMOBILITY-658: Add a method to QGeoCoordinate which takes an offset and returns another QGeoCoordinate";

        // Note that significand precision should be taken into account during comparing real numbers, that is why we consider 5.48417e-16 value equal to zero

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally |
            | Select the MapNavigation | |
            | Fill in '0' in to Start Latitude field | |
            | Fill in '100' in to Start Longitude field | |
            | Select Distance/Bearing from pre-defined dropdown list | |
            | Fill '1000000, 90' in to the given field | |
            | Press the Ok button | Verify that Destination fields are updated with 5.48417e-16 latitude and 108.9932 longitude |
            | Fill in '60' in to Start Latitude field | |
            | Fill in '100' in to Start Longitude field | |
            | Select Distance/Bearing from pre-defined dropdown list | |
            | Fill '1000000, 180' in to the given field | |
            | Press the Ok button | Verify that Destination fields are updated with 51.0068 latitude and 100 longitude |
            | Fill in '60' in to Start Latitude field | |
            | Fill in '100' in to Start Longitude field | |
            | Select Distance/Bearing from pre-defined dropdown list | |
            | Fill '1000000, 20' in to the given field | |
            | Press the Ok button | Verify that Destination fields are updated with 68.2523 latitude and 108.296 longitude |
        "));
    },

    store_and_load_a_landmark_data: {
        // Valid landmarks are -90~90 latitude, and -180~180 longitude
        landmark : ["landmark", "20", "120"]
    },

    // \groups BAT,1.1,MOBILITY-66
    store_and_load_a_landmark: function(name, latitude, longitude)
    {
        // Test meta data
        testTitle = "Landmark - Store and Load Landmarks";
        testBinary = "landmarkbrowser";
        testSource = "$MOBILITYDIR/examples/landmarkbrowser";        
        testGoal = "Verify that a landmark can be created (and stored)";
        testPreconditions = "None";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        startApplication(testBinary);
        select("Add Landmark");
        enter("Latitude", latitude);
        enter("Longitude", longitude);
        enter("Name", name);
        select("Ok");

        prompt("Verify that the landmark record is created");
    },

    negative_store_and_load_a_landmark_data: {
        // Landmarks outside the ranges -90~90 latitude, and -180~180 longitude
        bad_landmark_lat : ["bad_landmark", "100", "120"],
        bad_landmark_long : ["bad_landmark", "80", "300"]
    },

    // \groups BAT,1.1,MOBILITY-66
    negative_store_and_load_a_landmark: function(name, latitude, longitude)
    {
        // Test meta data
        testTitle = "Landmark - Handling Invalid Landmark";
        testBinary = "landmarkbrowser";
        testSource = "$MOBILITYDIR/examples/landmarkbrowser";  
        testGoal = "Verify that invalid landmarks are detected and handled gracefully.";
        testPreconditions = "None";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        startApplication(testTitle);
        select("Add Landmark");
        enter("Latitude", latitude);
        enter("Longitude", longitude);
        enter("Name", name);
        //expectMessageBox("Invalid");
        prompt("Verify a message box is shown indicating the values are ouside the valid range")
        select("Ok");
        select("Cancel");
    },

    // \groups BAT,1.1,MOBILITY-66
    sorted_search_based_on_category: function()
    {
        // Test meta data
        testTitle = "Landmark - Search on Category";
        testBinary = "landmarkbrowser";
        testSource = "$MOBILITYDIR/examples/landmarkbrowser";  
        testGoal = "Verify that landmarks can be sorted and filtered.";
        testPreconditions = "None";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally |
            | Create Accomodation category | |
            | Create Businesses category | |
            | Run the landmarkbrowser application | |
            | Create A1 landmark  in Accomodation category | |
            | Create A2 landmark  in Accomodation category | |
            | Create BB landmark in Businesses category | |
            | Press the Set Filter button | |
            | Select the Category checkbox | |
            | Select Accomodation category | |
            | Press Ok button | Verify that only A1 and A2 landmark is in the list and they are present in alphabetical order |
            | Press the Set Filter button | |
            | Select Education category | |
            | Press Ok button | Verify that no landmarks are in the list |
        "));
    },

    // \groups BAT,1.1,MOBILITY-66
    sort_landmarks_in_alphabetical_and_nearest: function()
    {
        // Test meta data
        testTitle = "Landmark - Nearest Landmarks";
        testBinary = "landmarkbrowser";
        testSource = "$MOBILITYDIR/examples/landmarkbrowser";  
        testGoal = "Verify that landmarks can be displayed in sorted order with nearest first.";
        testPreconditions = "None";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally |
            | Create landmark A(12;0) | |
            | Create landmark B(10;0) | |
            | Create landmark C(8;0) | |
            | Create landmark D(8;0) | |
            | Press Set Filter button | |
            | Select Proximity checkbox | |
            | Fill in 0 in to Lat field | |
            | Fill in 0 in to Long field | |
            | Fill in 10000000 in to Radius field| |
            | Press Ok button | Verify that C, D, B, A landmarks are in the list (not in alphabetical order) |
            | Press Set Filter button | |
            | Change radius value to 1000000 | |
            | Press Ok button | Verify that only C and D landmarks are in the list |
            | Press Set Filter button | |
            | Deselect Proximity checkbox | |
            | Press Ok button | Verify that landmarks appear in alphabetical order from A to Z |
        "));
    },

    // \groups BAT,1.1,MOBILITY-66
    landmarks_within_range_of_a_position: function()
    {
        // Test meta data
        testTitle = "Landmark - Within Range of Position";
        testBinary = "landmarkbrowser";
        testSource = "$MOBILITYDIR/examples/landmarkbrowser"; 
        testGoal = "Verify that landmarks within range of a position can be shown";
        testPreconditions = "None";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally |
            | Create landmark A(12;0) | |
            | Create landmark B(10;0) | |
            | Create landmark C(8;0) | |
            | Create landmark D(8;0) | |
            | Press Set Filter button | |
            | Select Box checkbox | |
            | Fill in 9 in to Top Left Lat field | |
            | Fill in 0 in to Top Left Long field | |
            | Fill in 0 i to Bottom Right Lat filed | |
            | Fill in 1 in to Bottom Right Long field | |
            | Press Ok button | Verify that only C and D landmarks are in the list and landmarks appear in alphabetical order |
        "));
    },
    
    // \groups BAT,1.1,MOBILITY-66
    create_edit_and_delete_a_landmark: function()
    {
        // Test meta data
        testTitle = "Landmark - Edit and Delete Landmarks";
        testBinary = "landmarkbrowser";
        testSource = "$MOBILITYDIR/examples/landmarkbrowser"; 
        testGoal = "Verify that notifications can be send whenever landmarks are added, updated or deleted.";
        testPreconditions = "None";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally |
            | Press Add Landmark button | |
            | Fill in AAA in to Name field | |
            | Fill in 30 into Latitude field | |
            | Fill in 30 into Longitude field | |
            | Press Ok button | Verify that message 'Landmark(s) have been added' appears on the screen |
            | Press Ok button | Verify that AAA landmark is in the landmarks list |
            | Select AAA landmark | |
            | Press Edit Landmark button | |
            | Change Latitude value to 40 | |
            | Change Longitude value to 40 | |
            | Change Name value to BBB | |
            | Press Ok button | Verify that message 'Landmark(s) have been edited' appears on the screen |
            | Press Ok button | Verify that BBB landmark has new latitude and longitude |
            | Select BBB landmark | |
            | Press Delete Landmarks button | Verify that message 'Landmark(s) have been removed' appears on the screen |
            | Press Ok button | Verify that only BBB landmark has been deleted |
            | Create 2 new landmarks A1 and A2 | |
            | Select both A1 and A2 landmarks |
            | Press Delete Landmarks button | Verify that message 'Landmark(s) have been removed' appears on the screen |
            | Press Ok button | Verify that only A1 and A2 landmarks have been deleted |
        "));
    },

    // \groups BAT,1.1,MOBILITY-66
    enumerate_categories: function()
    {
        // Test meta data
        testTitle = "Landmark - Enumerate";
        testBinary = "landmarkbrowser";
        testSource = "$MOBILITYDIR/examples/landmarkbrowser"; 
        testGoal = "Verify that created categories can be showed in a list.";
        testPreconditions = "None";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally |
            | Select Category tab | |
            | Create several categories | |
            | Swith to the Landmark tab and back to the Category tab | Verify that the created categories are present in the list |
        "));
    },

    // \groups BAT,1.1,MOBILITY-66
    add_and_delete_a_category: function()
    {
        //Landmark manager provides notifications whenever categories are added, updated or deleted
        // Test meta data
        testTitle = "Landmark - Add and Delete Categories ";
        testBinary = "landmarkbrowser";
        testSource = "$MOBILITYDIR/examples/landmarkbrowser";
        testGoal = "Verify that the system sends notifications when categories are added or deleted.";
        testPreconditions = "None";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally |
            | Select Category tab | |
            | Press Add Category button | |
            | Fill in AAA in to Name field | |
            | Press Ok button | Verify that message 'Category(ies) have been added' |
            | Press Ok button | Verify that AAA is added in list of categories in alphabetical order |
            | Press Add Category button | |
            | Fill in AAA in to Name field | |
            | Press Ok button | Verify that message 'Add Category Failed: category already Exists' appears on the screen |
            | Press Ok button | |
            | Press Add Category button | |
            | Press Ok button | Verify that message 'Category name must not be empty' appears on the screen |
            | Press Ok button | |
            | Select AAA category | |
            | Press Delete Categories button | Verify that message 'Categoty(ies) have been removed' appears on the screen |
            | Press Ok button | Verify that list of categories does not contain AAA category only|
            | Add A1 and A2 categories | |
            | Select A1 and A2 categories | |
            | Press Delete Categories button | Verify that message 'Categoty(ies) have been removed' appears on the screen |
            | Press Ok button | Verify that list of categories does not contain A1 and A2 categories only |
            | Select some of predefined categories | |
            | Press Delete Category button | Verify tha message 'Cannot delete a global category' appears on the screen |
            | Press Ok button | Verify that no categories have been deleted |
        "));
    },

    // \groups BAT,1.1,MOBILITY-538
    select_service_provider: function()
    {
        // Test meta data
        testTitle = "Maps and Navigation - Select Service Provider";
        testBinary = "geoservicedemo";
        testSource = "$MOBILITYDIR/tests/manual/location-testing-tools/geoservicedemo";
        testGoal = "Verify that service provider can be selected";
        testPreconditions = "None";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        startApplication(testBinary);
        select("Service Providers");
        select("nokia");
        select("Set Service Provider");
        prompt("Verify selected service provider is indicated as current service provider");
        /*
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | | Verify selected service provider is indicated as current service provider |
        "));
        */
    },

    request_route_from_one_GPS_location_to_another_data: {
        route1:["-27.575", "153.088", "-27.465", "153.023", "15901", "15987"]
    },

    // \groups BAT,1.1,MOBILITY-538
    request_route_from_one_GPS_location_to_another: function(lat1, long1, lat2, long2, distance1, distance2)
    {
        // Test meta data
        testTitle = "Maps and Navigation - Route Calculation";
        testBinary = "geoservicedemo";
        testSource = "$MOBILITYDIR/tests/manual/location-testing-tools/geoservicedemo";
        testGoal = "Verify that routes can be calculated from one GPS location to another.";
        testPreconditions = "None";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        startApplication(testBinary);
        select("Service Providers");
        select("nokia");
        select("Set Service Provider");
        select("Route");
        select("Request Route");
        enter(lat1);
        enter(long1);
        enter(lat2);
        enter(long2);
        select("Ok");
        prompt("Wait until the route is calculated (should be less than 10 seconds), verify the there are 8 segments, first and last instructions indicate to 'Head toward Logan rd' and 'Turn right onto Bartley St'");
        /*
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Wait until the route is calculated (should be less than 10 seconds) | Verify the there are 8 segments, first and last instructions indicate to 'Head toward Logan rd' and 'Turn right onto Bartley St' |
        "));
        */
        select("routes/route");
        compare(getText("distance"), distance1);
        select("Request Route");
        enter(lat2);
        enter(long2);
        enter(lat1);
        enter(long1);
        select("Ok");
        prompt("Wait until the route is calculated (should be less than 10 seconds),verify the instructions for segments 1 and 2 indicate to Head towards Sedgebrook st and Turn right onto Sedgebrook st");
        /*
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Wait until the route is calculated (should be less than 10 seconds) | Verify the instructions for segments 1 and 2 indicate to Head towards Sedgebrook st and Turn right onto Sedgebrook st |
        "));
        */
        compare(getText("distance"), distance2);
    },
    
    // \groups BAT,1.1,MOBILITY-538
    geocoding: function()
    {
        // Test meta data
        testTitle = "Maps and Navigation - Geocoding";
        testBinary = "geoservicedemo"; // (sources are /tests/location-testing-tools/geoservicedemo)
        testSource = "$MOBILITYDIR/tests/manual/location-testing-tools/geoservicedemo";
        testGoal = "Verify that geocoding searches are supported.";
        testPreconditions = "Note that testing via proxy is not recommended, incorrect settings can be a cause of the 'Socket operation timed out' error";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally |
            | Select Search By Adress tab | |
            | Select One-box Search checkbox | |
            | Fill in 'Brandl st, Eight Mile Plains, Australia' in search field | |
            | Select Geocoding search | |
            | Press Ok button | |
            | Wait until data is recieved | |
            | Select places | Verify that count = 1 |
            | Select place | Verify that latitude is -27.5798, longitude is 153.1 |
            | Select address | Verify that Country is AUSTRALIA, country code is AUS, city is Eight Mile Plains, street name is Branl St, post code is 4113 |
        "));
    },
    
    // \groups BAT,1.1,MOBILITY-538
    reverse_geocoding: function()
    {
        // Test meta data
        testTitle = "Maps and Navigation - Reverse Geocoding";
        testBinary = "geoservicedemo";
        testSource = "$MOBILITYDIR/tests/manual/location-testing-tools/geoservicedemo";
        testGoal = "Verify that a geocode can be calculated from a given position.";
        testPreconditions = "Note that testing via proxy is not recommended, incorrect settings can be a cause of the 'Socket operation timed out' error";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally |
            | Select Reverse Geocoding tab | |
            | Press Search By Coordinates button | |
            | Fill in -27.5798 in Latitude field | |
            | Fill in 153.1 in Longitude field | |
            | Press Ok button | |
            | Wait until data is recieved | |
            | Select places/place/adress | Verify that Country is AUSTRALIA, country code is AUS, city is Eight Mile Plains, street name is 54 Brandl St, post code is 4113 |
        "));
   },

    // \groups BAT,1.1,MOBILITY-538
    display_a_map: function()
    {
        // Test meta data
        testTitle = "Maps and Navigation - Display a Map";
        testBinary = "mapsdemo";
        testSource = "$MOBILITYDIR/tests/manual/location-testing-tools/geoservicedemo";
        testGoal = "Verify that a map can be displayed";
        testPreconditions = "None";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>
            
            Note that  internet connection is required for this test case.
            | *Step* | *Verification* |
            | Run the mapsdemo application (sources are /examples/mapsdemo) | Map for current location is displayed on the screen |
        "));
    },

    // \groups BAT,1.1,MOBILITY-538
    different_map_types: function()
    {
        // Test meta data
        testTitle = "Maps and Navigation - Map View Options";
        testBinary = "mapviewer"; // (sources are /tests/location-testing-tools/mapviewer)
        testSource = "$MOBILITYDIR/tests/location-testing-tools/mapviewer";
        testGoal = "Verify that maps can be shown in street, satellite and terrain mode.";
        testPreconditions = "<br>1. internet connection is required for this test case.<br>2. Nokia map engine supports only Street, Satellite and Terrain map types";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally and map for current location is displayed on the screen |
            | Press Option button | |
            | Press Street button (if button is enabled) | Map is drawn in Street view |
            | Press Option button | |
            | Press Satellite button (if button is enabled) | Map is drawn in Satellite view |
            | Press Option button | |
            | Press Terrain button (if button is enabled) | Map is drawn in Satellite view |
        "));
    },

    // \groups BAT,1.1,MOBILITY-538
    zooming_support:function()
    {
        // Test meta data
        testTitle = "Maps and Navigation - Zooming";
        testBinary = "mapsdemo"; // (sources are /tests/location-testing-tools/mapviewer)
        testSource = "$MOBILITYDIR/examples/mapsdemo";
        testGoal = "Verify that maps can be zoomed in and out.";
        testPreconditions = "internet connection is required for this test case.";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally |
            | Run the mapsdemo application | Map is displayed on the screen |
            | Press - button | Map is zoomed out correctly |
            | Press + button | Map is zoomed in correctly |
        "));
    },

    // \groups BAT,1.1,MOBILITY-538
    capturing_coordinates:function()
    {
        // Test meta data
        testTitle = "Maps and Navigation - Coordinate Capturing";
        testBinary = "mapviewer"; // (sources are /tests/location-testing-tools/mapviewer)
        testSource = "$MOBILITYDIR/tests/location-testing-tools/mapviewer";
        testGoal = "Verify that coordinates can be captured when selecting a location on the map.";
        testPreconditions = "internet connection is required for this test case.";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally. Map is displayed on the screen |
            | Navigate and/or zoom in the map to see Brisbane | |
            | Right mouse click on the square which represents Brisbane | |
            | Select Coordinates menu item | |
            | Select Capture menu item | Verify that dialog with coordinates appears on the screen. Latitude is about -27.46, longitude is about 153.02 |
        "));
    },

    // \groups BAT,1.2,QTMOBILITY-757,QTMOBILITY-701
    pixmap_object_zooming: function()
    {
        //Test application testqtLocation covers just one use case meanwhile we have 8 different situation
        //depending on what units and transforms are in use (we have 4 types of units (PixelUnit, MeterUnit, RelativeArcSecondUnit, AbsoluteArcSecondUnit)
        //and 2 types of transforms (BilinearTransform, ExactTransform)). New set of tests has to be created as soon as testqtLocation is improved.

        // Test meta data
        testTitle = "Maps and Navigation - Pixmap Object Zooming";
        testBinary = "testQtLocation";
        testSource = "$MOBILITYDIR/tests/applications/location/testqtlocation";
        testGoal = "Verify that pixmap object can be zoomed";
        testPreconditions = "GPS and internet connection is required for this test case";
        testGroups = "BAT_MOBILITY";
        testRequirements = "QTMOBILITY-757: Be able to prevent a QGeoMapPixmapObject from being scaled when zooming occurs<br>
                            QTMOBILITY-701: Add a QGraphicsItem based map object.";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally |
            | Select the MapNavigation | |
            | Go to Map tab | Verify that map is loaded for current position |
            | Swith to MapObject mode | |
            | Tap on the screen to create pixmap object | Verify that blue square appears on the screen in place of touch |
            | Switch to Pan/Zoom mode | |
            | Increase zoom level | Verify that the blue square is not scaled |
            | Decrease zoom level | Verify that the blue square is not scaled |
        "));
    },

    request_landmarks_for_given_coordinate_with_reverse_geocoding: function()
    {
        // Test meta data
        testTitle = "Maps and Navigation - Landmarks for Coordinate with Reverse Geocoding";
        testBinary = "weatherinfo_with_location";
        testSource = "$MOBILITYDIR/demos/weatherinfo";
        testGoal = "Verify that ";
        testPreconditions = "None";
        testGroups = "BAT_MOBILITY";
        testRequirements = "";

        // Test steps
/*
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally |");
*/

        skip( "Nothing tested", SkipAll );
    },


    //TESTED_COMPONENT=plugins/declarative/location

    // \groups BAT,1.2,QTMOBILITY-796
    qml_display_map: function()
    {
        // Test meta data
        testTitle = "Location - Map Display";
        testBinary = "qml_mapviewer";
        testSource = "$MOBILITYDIR/tests/examples/declarative-location/mapviewer";
        testGoal = "Verify that a map can be loaded for a given position.";
        testPreconditions = "Internet connection is required for this test case.";
        testGroups = "BAT_MOBILITY";
        testRequirements = "QTMOBILITY-796: QML for Maps & Navigation:mapping";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Run the qml_mapviewer application (sources are in examples/declarative-location/mapviewer) | Verify that map is loaded for the default location (lat 51.5, long -0.11) |
        "));
    },

    // \groups BAT,1.2,QTMOBILITY-796
    qml_zoom_a_map: function()
    {
        // Test meta data
        testTitle = "Location - Zoom In and Out";
        testBinary = "testQtLocation";
        testSource = "$MOBILITYDIR/tests/applications/location/testqtlocation";
        testGoal = "Verify that ";
        testPreconditions = "GPS and internet connection is required for this test case.";
        testGroups = "BAT_MOBILITY";
        testRequirements = "QTMOBILITY-796: QML for Maps & Navigation:mapping.";

        // Test steps
        prompt(twiki("---+++ " + testTitle + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>
            *Requirements:* " + testRequirements + "<br>

            | *Step* | *Verification* |
            | Launch " + testBinary + " | App launches normally |
            | Select the MapNavigation.qml | |
            | Tap on the Mode button | Verify that map is loaded |
            | Tap on Plus button | Verify that map is zoomed in |
            | Tap on Plus button | Verify that zoom level is decreased and map is displayed correctly with new zoom level |
        "));
    }


}  // end of testcase


/*

----Maps And Navigation use cases

    list_of_way_points: function() {    },

    distinguish_pedestrian_and_car_navigation: function() {    },

    find_matching_landmarks_for_given_search_criteria_with_geocoding: function() {    },

    provide_map_for_given_coordinate: function() {    },

    online_and_offline: function() {    }

*/