diff options
Diffstat (limited to 'doc/src/platforms/compiler-notes.qdoc')
| -rw-r--r-- | doc/src/platforms/compiler-notes.qdoc | 279 |
1 files changed, 10 insertions, 269 deletions
diff --git a/doc/src/platforms/compiler-notes.qdoc b/doc/src/platforms/compiler-notes.qdoc index bcf7cb4c6e..fb534dfbb8 100644 --- a/doc/src/platforms/compiler-notes.qdoc +++ b/doc/src/platforms/compiler-notes.qdoc @@ -7,11 +7,11 @@ ** This file is part of the documentation of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:FDL$ -** Commercial Usage -** Licensees holding valid Qt Commercial licenses may use this file in -** accordance with the Qt Commercial License Agreement provided with the -** Software or, alternatively, in accordance with the terms contained in a -** written agreement between you and Nokia. +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the Technology Preview License Agreement accompanying +** this package. ** ** GNU Free Documentation License ** Alternatively, this file may be used under the terms of the GNU Free @@ -31,273 +31,14 @@ \title Compiler Notes \brief Information about the C++ compilers and tools used to build Qt. - This page contains information about the C++ compilers and tools used - to build Qt on various platforms. + This page used to contain information about the C++ compilers and tools + used to build Qt on various platforms. This information is now maintained + in the \l{Platform and Compiler Notes} for each platform. - \tableofcontents - - Please refer to the \l{Platform Notes} for information on the platforms - Qt is currently known to run on, and see the \l{Supported Platforms} - page for information about the status of each platform. + Please refer to the \l{Supported Platforms} page for information about the + status of each platform. If you have anything to add to this list or any of the platform or compiler-specific pages, please submit it via the \l{Bug Report Form} or through the \l{Public Qt Repository}. - - \section1 Supported Features - - Not all compilers used to build Qt are able to compile all modules. The following table - shows the compiler support for five modules that are not uniformly available for all - platforms and compilers. - - \table - \header \o Compiler \o{5,1} Features - \header \o \o Concurrent \o XmlPatterns \o WebKit(*) \o CLucene \o Phonon - \row \o g++ 3.3 \o \o \bold{X} \o \o \bold{X} \o \bold{X} - \row \o g++ 3.4 and up \o \bold{X} \o \bold{X} \o \bold{X} \o \bold{X} \o \bold{X} - \row - \row \o SunCC 5.5 \o \o \o \o \bold{X} \o \bold{X} - \row - \row \o aCC series 3 \o \o \o \o \bold{X} \o \bold{X} - \row \o aCC series 6 \o \bold{X} \o \bold{X} \o \bold{X} \o \bold{X} \o \bold{X} - \row \o xlC 6 \o \o \o \o \bold{X} \o \bold{X} - \row \o Intel CC 10 \o \bold{X} \o \bold{X} \o \bold{X} \o \bold{X} \o \bold{X} - \row - \row \o MSVC 2003 \o \bold{X} \o \bold{X} \o \o \bold{X} \o \bold{X} - \row \o MSVC 2005 and up \o \bold{X} \o \bold{X} \o \bold{X} \o \bold{X} \o \bold{X} - \endtable - - * WebKit is only supported as a dynamically built library. Static linkage is not supported. - - \target GCC - \section1 GCC - - \section2 GCC on Windows (MinGW) - - We have tested Qt with this compiler on Windows XP. - The minimal version of MinGW supported is: - - \list - \o GCC 3.4.2 - \o MinGW runtime 3.7 - \o win32api 3.2 - \o binutils 2.15.91 - \o mingw32-make 3.80.0-3 - \endlist - - \note For users of the MinGW binary package: This package is now - based on MinGW 4.4. The installer no longer offers to download - MinGW for you, but rather offers to use a version of MinGW that - you already have installed on your machine. You just tell the - installer which directory MinGW is installed in. If you don't - already have MinGW 4.4 installed, you can download a .zip archive - from our \l{ftp://ftp.trolltech.com/misc/MinGW-gcc440_1.zip} {ftp - site}. This archive provides fixes to MinGW and support for - missing API, See the _patches directory in the archive for - details. - - \note A MinGW installation is only needed to build against the - binary pacakge, not to run the pre-compiled binaries that are in - the package. - - \section2 GCC 4.0.0 - - The released package of the compiler has some bugs that lead to - miscompilations. We recommend using GCC 4.0.1 or later, or to use - a recent CVS snapshot of the GCC 4.0 branch. The version of GCC - 4.0.0 that is shipped with Mac OS X 10.4 "Tiger" is known to work - with Qt for Mac OS X. - - \section2 HP-UX - - The hpux-g++ platform is tested with GCC 3.4.4. - - \section2 Solaris - - Please use GCC 3.4.2 or later. - Please not that WebKit is not supported for Solaris, regardless of which compiler is used. - - \section2 Mac OS X - - Please use the latest GCC 3.3 from Apple or a later version of GCC 3. - The gcc 3.3 that is provided with Xcode 1.5 is known to generate bad code. - Use the November 2004 GCC 3.3 updater \l{http://connect.apple.com}{available from Apple}. - - \section2 GCC 3.4.6 (Debian 3.4.6-5) on AMD64 (x86_64) - - This compiler is known to miscompile some parts of Qt when doing a - release build. There are several workarounds: - - \list 1 - \o Use a debug build instead. - \o For each miscompilation encountered, recompile the file, removing the -O2 option. - \o Add -fno-gcse to the QMAKE_CXXFLAGS_RELEASE. - \endlist - - \section1 HP ANSI C++ (aCC) - - The hpux-acc-32 and hpux-acc-64 platforms are tested with aCC A.03.57. The - hpuxi-acc-32 and hpuxi-acc-64 platforms are tested with aCC A.06.10. - - \section1 Intel C++ Compiler - - Qt supports the Intel C++ compiler on both Windows and Linux. - However, there are a few issues on Linux (see the following - section). - - \section2 Intel C++ Compiler for Linux - - Nokia currently tests the following compilers: - - \list - - \o Intel(R) C++ Compiler for applications running on IA-32, - Version 10.1 Build 20080602 Package ID: l_cc_p_10.1.017 - - \o Intel(R) C++ Compiler for applications running on Intel(R) 64, - Version 10.1 Build 20080602 Package ID: l_cc_p_10.1.017 - - \endlist - - We do not currently test the IA-64 (Itanium) compiler. - - \section2 Known Issues with Intel C++ Compiler for Linux - - \list - - \o Precompiled header support does not work in version 10.0.025 - and older. For these compilers, you should configure Qt with - -no-pch. Precompiled header support works properly in version - 10.0.026 and later. - \o Version 10.0.026 for Intel 64 is known to miscompile qmake when - building in release mode. For now, configure Qt with - -debug. Version 10.1.008 and later can compile qmake in release - mode. - \o Versions 10.1.008 to 10.1.015 for both IA-32 and Intel 64 are - known crash with "(0): internal error: 0_47021" when compiling - QtXmlPatterns, QtWebKit, and Designer in release mode. Version - 10.1.017 compiles these modules correctly in release mode. - \endlist - - \section2 Intel C++ Compiler (Windows, Altix) - - Qt 4 has been tested successfully with: - - \list - \o Windows - Intel(R) C++ Compiler for 32-bit applications, - Version 9.1.040. - \o Altix - Intel(R) C++ Itanium(R) Compiler for Itanium(R)-based - applications Version 8.1 Build 20050406 Package ID: l_cc_pc_8.1.030 - \endlist - - We currently only test the Intel compiler on 32-bit Windows versions. - - \section1 MIPSpro (IRIX) - - \bold{IRIX is an unsupported platform. See the \l{Supported Platforms} page - and Qt's Software's online \l{Platform Support Policy} page for details.} - - Qt 4.4.x requires MIPSpro version 7.4.2m. - - Note that MIPSpro version 7.4.4m is currently not supported, since it has - introduced a number of problems that have not yet been resolved. - We recommend using 7.4.2m for Qt development. However, please note the - unsupported status of this platform. - - \target Sun Studio - \section1 Forte Developer / Sun Studio (Solaris) - - \section2 Sun Studio - - Qt is tested using Sun Studio 12 (Sun CC 5.9). Go to - \l{Sun Studio Patches} page on Sun's Web site to download - the latest patches for your Sun compiler. - - Please note that Qt 4.6 is stricter in its STL requirements and - that the default STL implementation used by Sun CC does not pass - those requirements. This does not affect binary compatibility and - you can continue to use STL in your own code, but Qt's - STL-compatibility functions will be disabled. - - Sun CC ships with a secondary STL implementation (called stlport4) - which is standards-compliant and can be used by Qt. You can enable - it by passing the -library=stlport4 option to the compiler. Note - that this does not affect Qt's binary compatibility, but it may - affect that of other libraries and programs that use STL. - - \section2 Sun WorkShop 5.0 - - Sun WorkShop 5.0 is not supported with Qt 4. - - \section1 Visual Studio (Windows) - - We do most of our Windows development on Windows XP, using Microsoft - Visual Studio .NET 2005 and Visual Studio 2008 (both the 32- and 64-bit - versions). - - Qt works with the Standard Edition, the Professional Edition and Team - System Edition of Visual Studio 2005. - - In order to use Qt with the Visual Studio 2005/2008 Express Edition you need - to download and install the platform SDK. Due to limitations in the - Express Edition it is not possible for us to install the Qt Visual - Studio Integration. You will need to use our command line tools to - build Qt applications with this edition. - - The Visual C++ Linker doesn't understand filenames with spaces (as in - \c{C:\Program files\Qt\}) so you will have to move it to another place, - or explicitly set the path yourself; for example: - - \snippet doc/src/snippets/code/doc_src_compiler-notes.qdoc 0 - - If you are experiencing strange problems with using special flags that - modify the alignment of structure and union members (such as \c{/Zp2}) - then you will need to recompile Qt with the flags set for the - application as well. - - If you're using Visual Studio .NET (2002) Standard Edition, you should be - using the Qt binary package provided, and not the source package. - As the Standard Edition does not optimize compiled code, your compiled - version of Qt would perform suboptimally with respect to speed. - - With Visual Studio 2005 Service Pack 1 a bug was introduced which - causes Qt not to compile, this has been fixed with a hotfix available - from Microsoft. See this - \l{http://qt.nokia.com/developer/faqs/faq.2006-12-18.3281869860}{Knowledge Base entry} - for more information. - - There currently is a problem when compiling Qt with Visual Studio 2010 for 64-bit. - Its optimizer causes trouble and generates code that crashes for the release builds. - To avoid the crashes, You need to apply the hotfix in the following article - http://support.microsoft.com/kb/2280741. - - \section1 IBM xlC (AIX) - - The makeC++SharedLib utility must be in your PATH and be up to date to - build shared libraries. From IBM's - \l{http://www.redbooks.ibm.com/abstracts/sg245674.html}{C and C++ Application Development on AIX} - Redbook: - - \list - \o "The second step is to use the makeC++SharedLib command to create the - shared object. The command has many optional arguments, but in its - simplest form, can be used as follows:" - \snippet doc/src/snippets/code/doc_src_compiler-notes.qdoc 1 - \o "The full path name to the command is not required; however, to avoid - this, you will have to add the directory in which it is located to - your PATH environment variable. The command is located in the - /usr/vacpp/bin directory with the VisualAge C++ Professional for AIX, - Version 5 compiler." - \endlist - - \section2 VisualAge C++ for AIX, Version 6.0 - - Make sure you have the - \l{http://www-1.ibm.com/support/search.wss?rs=32&tc=SSEP5D&dc=D400}{latest upgrades} - installed. - - \section2 GCCE (Symbian) - - GCCE cannot be used to compile Qt libaries for the Symbian platform, but GCCE is supported - when compiling Qt applications for Symbian platform. */ |