Initial import from the monolithic Qt.

This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:

http://qt.gitorious.org/qt/pages/GitIntroductionWithQt

If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.

Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12

1 files changed, 631 insertions, 0 deletions

diff --git a/src/3rdparty/libjpeg/usage.txt b/src/3rdparty/libjpeg/usage.txt
new file mode 100644
index 0000000000..eae58425f0
--- /dev/null
+++ b/src/3rdparty/libjpeg/usage.txt
@@ -0,0 +1,631 @@
+USAGE instructions for the Independent JPEG Group's JPEG software
+=================================================================
+
+This file describes usage of the JPEG conversion programs cjpeg and djpeg,
+as well as the utility programs jpegtran, rdjpgcom and wrjpgcom.  (See
+the other documentation files if you wish to use the JPEG library within
+your own programs.)
+
+If you are on a Unix machine you may prefer to read the Unix-style manual
+pages in files cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1.
+
+
+INTRODUCTION
+
+These programs implement JPEG image encoding, decoding, and transcoding.
+JPEG (pronounced "jay-peg") is a standardized compression method for
+full-color and gray-scale images.
+
+
+GENERAL USAGE
+
+We provide two programs, cjpeg to compress an image file into JPEG format,
+and djpeg to decompress a JPEG file back into a conventional image format.
+
+On Unix-like systems, you say:
+	cjpeg [switches] [imagefile] >jpegfile
+or
+	djpeg [switches] [jpegfile]  >imagefile
+The programs read the specified input file, or standard input if none is
+named.  They always write to standard output (with trace/error messages to
+standard error).  These conventions are handy for piping images between
+programs.
+
+On most non-Unix systems, you say:
+	cjpeg [switches] imagefile jpegfile
+or
+	djpeg [switches] jpegfile  imagefile
+i.e., both the input and output files are named on the command line.  This
+style is a little more foolproof, and it loses no functionality if you don't
+have pipes.  (You can get this style on Unix too, if you prefer, by defining
+TWO_FILE_COMMANDLINE when you compile the programs; see install.txt.)
+
+You can also say:
+	cjpeg [switches] -outfile jpegfile  imagefile
+or
+	djpeg [switches] -outfile imagefile  jpegfile
+This syntax works on all systems, so it is useful for scripts.
+
+The currently supported image file formats are: PPM (PBMPLUS color format),
+PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster Toolkit
+format).  (RLE is supported only if the URT library is available.)
+cjpeg recognizes the input image format automatically, with the exception
+of some Targa-format files.  You have to tell djpeg which format to generate.
+
+JPEG files are in the defacto standard JFIF file format.  There are other,
+less widely used JPEG-based file formats, but we don't support them.
+
+All switch names may be abbreviated; for example, -grayscale may be written
+-gray or -gr.  Most of the "basic" switches can be abbreviated to as little as
+one letter.  Upper and lower case are equivalent (-BMP is the same as -bmp).
+British spellings are also accepted (e.g., -greyscale), though for brevity
+these are not mentioned below.
+
+
+CJPEG DETAILS
+
+The basic command line switches for cjpeg are:
+
+	-quality N[,...]  Scale quantization tables to adjust image quality.
+			Quality is 0 (worst) to 100 (best); default is 75.
+			(See below for more info.)
+
+	-grayscale	Create monochrome JPEG file from color input.
+			Be sure to use this switch when compressing a grayscale
+			BMP file, because cjpeg isn't bright enough to notice
+			whether a BMP file uses only shades of gray.  By
+			saying -grayscale, you'll get a smaller JPEG file that
+			takes less time to process.
+
+	-optimize	Perform optimization of entropy encoding parameters.
+			Without this, default encoding parameters are used.
+			-optimize usually makes the JPEG file a little smaller,
+			but cjpeg runs somewhat slower and needs much more
+			memory.  Image quality and speed of decompression are
+			unaffected by -optimize.
+
+	-progressive	Create progressive JPEG file (see below).
+
+	-scale M/N	Scale the output image by a factor M/N.  Currently
+			supported scale factors are M/N with all N from 1 to
+			16, where M is the destination DCT size, which is 8 by
+			default (see -block N switch below).
+
+	-targa		Input file is Targa format.  Targa files that contain
+			an "identification" field will not be automatically
+			recognized by cjpeg; for such files you must specify
+			-targa to make cjpeg treat the input as Targa format.
+			For most Targa files, you won't need this switch.
+
+The -quality switch lets you trade off compressed file size against quality of
+the reconstructed image: the higher the quality setting, the larger the JPEG
+file, and the closer the output image will be to the original input.  Normally
+you want to use the lowest quality setting (smallest file) that decompresses
+into something visually indistinguishable from the original image.  For this
+purpose the quality setting should be between 50 and 95; the default of 75 is
+often about right.  If you see defects at -quality 75, then go up 5 or 10
+counts at a time until you are happy with the output image.  (The optimal
+setting will vary from one image to another.)
+
+-quality 100 will generate a quantization table of all 1's, minimizing loss
+in the quantization step (but there is still information loss in subsampling,
+as well as roundoff error).  This setting is mainly of interest for
+experimental purposes.  Quality values above about 95 are NOT recommended for
+normal use; the compressed file size goes up dramatically for hardly any gain
+in output image quality.
+
+In the other direction, quality values below 50 will produce very small files
+of low image quality.  Settings around 5 to 10 might be useful in preparing an
+index of a large image library, for example.  Try -quality 2 (or so) for some
+amusing Cubist effects.  (Note: quality values below about 25 generate 2-byte
+quantization tables, which are considered optional in the JPEG standard.
+cjpeg emits a warning message when you give such a quality value, because some
+other JPEG programs may be unable to decode the resulting file.  Use -baseline
+if you need to ensure compatibility at low quality values.)
+
+The -quality option has been extended in IJG version 7 for support of separate
+quality settings for luminance and chrominance (or in general, for every
+provided quantization table slot).  This feature is useful for high-quality
+applications which cannot accept the damage of color data by coarse
+subsampling settings.  You can now easily reduce the color data amount more
+smoothly with finer control without separate subsampling.  The resulting file
+is fully compliant with standard JPEG decoders.
+Note that the -quality ratings refer to the quantization table slots, and that
+the last value is replicated if there are more q-table slots than parameters.
+The default q-table slots are 0 for luminance and 1 for chrominance with
+default tables as given in the JPEG standard.  This is compatible with the old
+behaviour in case that only one parameter is given, which is then used for
+both luminance and chrominance (slots 0 and 1).  More or custom quantization
+tables can be set with -qtables and assigned to components with -qslots
+parameter (see the "wizard" switches below).
+CAUTION: You must explicitly add -sample 1x1 for efficient separate color
+quality selection, since the default value used by library is 2x2!
+
+The -progressive switch creates a "progressive JPEG" file.  In this type of
+JPEG file, the data is stored in multiple scans of increasing quality.  If the
+file is being transmitted over a slow communications link, the decoder can use
+the first scan to display a low-quality image very quickly, and can then
+improve the display with each subsequent scan.  The final image is exactly
+equivalent to a standard JPEG file of the same quality setting, and the total
+file size is about the same --- often a little smaller.
+
+Switches for advanced users:
+
+	-block N	Set DCT block size.  All N from 1 to 16 are possible.
+			Default is 8 (baseline format).
+			Larger values produce higher compression,
+			smaller values produce higher quality
+			(exact DCT stage possible with 1 or 2; with the
+			default quality of 75 and default Luminance qtable
+			the DCT+Quantization stage is lossless for N=1).
+			CAUTION: An implementation of the JPEG SmartScale
+			extension is required for this feature.  SmartScale
+			enabled JPEG is not yet widely implemented, so many
+			decoders will be unable to view a SmartScale extended
+			JPEG file at all.
+
+	-dct int	Use integer DCT method (default).
+	-dct fast	Use fast integer DCT (less accurate).
+	-dct float	Use floating-point DCT method.
+			The float method is very slightly more accurate than
+			the int method, but is much slower unless your machine
+			has very fast floating-point hardware.  Also note that
+			results of the floating-point method may vary slightly
+			across machines, while the integer methods should give
+			the same results everywhere.  The fast integer method
+			is much less accurate than the other two.
+
+	-nosmooth	Don't use high-quality downsampling.
+
+	-restart N	Emit a JPEG restart marker every N MCU rows, or every
+			N MCU blocks if "B" is attached to the number.
+			-restart 0 (the default) means no restart markers.
+
+	-smooth N	Smooth the input image to eliminate dithering noise.
+			N, ranging from 1 to 100, indicates the strength of
+			smoothing.  0 (the default) means no smoothing.
+
+	-maxmemory N	Set limit for amount of memory to use in processing
+			large images.  Value is in thousands of bytes, or
+			millions of bytes if "M" is attached to the number.
+			For example, -max 4m selects 4000000 bytes.  If more
+			space is needed, temporary files will be used.
+
+	-verbose	Enable debug printout.  More -v's give more printout.
+	or  -debug	Also, version information is printed at startup.
+
+The -restart option inserts extra markers that allow a JPEG decoder to
+resynchronize after a transmission error.  Without restart markers, any damage
+to a compressed file will usually ruin the image from the point of the error
+to the end of the image; with restart markers, the damage is usually confined
+to the portion of the image up to the next restart marker.  Of course, the
+restart markers occupy extra space.  We recommend -restart 1 for images that
+will be transmitted across unreliable networks such as Usenet.
+
+The -smooth option filters the input to eliminate fine-scale noise.  This is
+often useful when converting dithered images to JPEG: a moderate smoothing
+factor of 10 to 50 gets rid of dithering patterns in the input file, resulting
+in a smaller JPEG file and a better-looking image.  Too large a smoothing
+factor will visibly blur the image, however.
+
+Switches for wizards:
+
+	-arithmetic	Use arithmetic coding.  CAUTION: arithmetic coded JPEG
+			is not yet widely implemented, so many decoders will
+			be unable to view an arithmetic coded JPEG file at
+			all.
+
+	-baseline	Force baseline-compatible quantization tables to be
+			generated.  This clamps quantization values to 8 bits
+			even at low quality settings.  (This switch is poorly
+			named, since it does not ensure that the output is
+			actually baseline JPEG.  For example, you can use
+			-baseline and -progressive together.)
+
+	-qtables file	Use the quantization tables given in the specified
+			text file.
+
+	-qslots N[,...] Select which quantization table to use for each color
+			component.
+
+	-sample HxV[,...]  Set JPEG sampling factors for each color component.
+
+	-scans file	Use the scan script given in the specified text file.
+
+The "wizard" switches are intended for experimentation with JPEG.  If you
+don't know what you are doing, DON'T USE THEM.  These switches are documented
+further in the file wizard.txt.
+
+
+DJPEG DETAILS
+
+The basic command line switches for djpeg are:
+
+	-colors N	Reduce image to at most N colors.  This reduces the
+	or -quantize N	number of colors used in the output image, so that it
+			can be displayed on a colormapped display or stored in
+			a colormapped file format.  For example, if you have
+			an 8-bit display, you'd need to reduce to 256 or fewer
+			colors.  (-colors is the recommended name, -quantize
+			is provided only for backwards compatibility.)
+
+	-fast		Select recommended processing options for fast, low
+			quality output.  (The default options are chosen for
+			highest quality output.)  Currently, this is equivalent
+			to "-dct fast -nosmooth -onepass -dither ordered".
+
+	-grayscale	Force gray-scale output even if JPEG file is color.
+			Useful for viewing on monochrome displays; also,
+			djpeg runs noticeably faster in this mode.
+
+	-scale M/N	Scale the output image by a factor M/N.  Currently
+			supported scale factors are M/N with all M from 1 to
+			16, where N is the source DCT size, which is 8 for
+			baseline JPEG.  If the /N part is omitted, then M
+			specifies the DCT scaled size to be applied on the
+			given input.  For baseline JPEG this is equivalent to
+			M/8 scaling, since the source DCT size for baseline
+			JPEG is 8.  Scaling is handy if the image is larger
+			than your screen; also, djpeg runs much faster when
+			scaling down the output.
+
+	-bmp		Select BMP output format (Windows flavor).  8-bit
+			colormapped format is emitted if -colors or -grayscale
+			is specified, or if the JPEG file is gray-scale;
+			otherwise, 24-bit full-color format is emitted.
+
+	-gif		Select GIF output format.  Since GIF does not support
+			more than 256 colors, -colors 256 is assumed (unless
+			you specify a smaller number of colors).  If you
+			specify -fast, the default number of colors is 216.
+
+	-os2		Select BMP output format (OS/2 1.x flavor).  8-bit
+			colormapped format is emitted if -colors or -grayscale
+			is specified, or if the JPEG file is gray-scale;
+			otherwise, 24-bit full-color format is emitted.
+
+	-pnm		Select PBMPLUS (PPM/PGM) output format (this is the
+			default format).  PGM is emitted if the JPEG file is
+			gray-scale or if -grayscale is specified; otherwise
+			PPM is emitted.
+
+	-rle		Select RLE output format.  (Requires URT library.)
+
+	-targa		Select Targa output format.  Gray-scale format is
+			emitted if the JPEG file is gray-scale or if
+			-grayscale is specified; otherwise, colormapped format
+			is emitted if -colors is specified; otherwise, 24-bit
+			full-color format is emitted.
+
+Switches for advanced users:
+
+	-dct int	Use integer DCT method (default).
+	-dct fast	Use fast integer DCT (less accurate).
+	-dct float	Use floating-point DCT method.
+			The float method is very slightly more accurate than
+			the int method, but is much slower unless your machine
+			has very fast floating-point hardware.  Also note that
+			results of the floating-point method may vary slightly
+			across machines, while the integer methods should give
+			the same results everywhere.  The fast integer method
+			is much less accurate than the other two.
+
+	-dither fs	Use Floyd-Steinberg dithering in color quantization.
+	-dither ordered	Use ordered dithering in color quantization.
+	-dither none	Do not use dithering in color quantization.
+			By default, Floyd-Steinberg dithering is applied when
+			quantizing colors; this is slow but usually produces
+			the best results.  Ordered dither is a compromise
+			between speed and quality; no dithering is fast but
+			usually looks awful.  Note that these switches have
+			no effect unless color quantization is being done.
+			Ordered dither is only available in -onepass mode.
+
+	-map FILE	Quantize to the colors used in the specified image
+			file.  This is useful for producing multiple files
+			with identical color maps, or for forcing a predefined
+			set of colors to be used.  The FILE must be a GIF
+			or PPM file.  This option overrides -colors and
+			-onepass.
+
+	-nosmooth	Don't use high-quality upsampling.
+
+	-onepass	Use one-pass instead of two-pass color quantization.
+			The one-pass method is faster and needs less memory,
+			but it produces a lower-quality image.  -onepass is
+			ignored unless you also say -colors N.  Also,
+			the one-pass method is always used for gray-scale
+			output (the two-pass method is no improvement then).
+
+	-maxmemory N	Set limit for amount of memory to use in processing
+			large images.  Value is in thousands of bytes, or
+			millions of bytes if "M" is attached to the number.
+			For example, -max 4m selects 4000000 bytes.  If more
+			space is needed, temporary files will be used.
+
+	-verbose	Enable debug printout.  More -v's give more printout.
+	or  -debug	Also, version information is printed at startup.
+
+
+HINTS FOR CJPEG
+
+Color GIF files are not the ideal input for JPEG; JPEG is really intended for
+compressing full-color (24-bit) images.  In particular, don't try to convert
+cartoons, line drawings, and other images that have only a few distinct
+colors.  GIF works great on these, JPEG does not.  If you want to convert a
+GIF to JPEG, you should experiment with cjpeg's -quality and -smooth options
+to get a satisfactory conversion.  -smooth 10 or so is often helpful.
+
+Avoid running an image through a series of JPEG compression/decompression
+cycles.  Image quality loss will accumulate; after ten or so cycles the image
+may be noticeably worse than it was after one cycle.  It's best to use a
+lossless format while manipulating an image, then convert to JPEG format when
+you are ready to file the image away.
+
+The -optimize option to cjpeg is worth using when you are making a "final"
+version for posting or archiving.  It's also a win when you are using low
+quality settings to make very small JPEG files; the percentage improvement
+is often a lot more than it is on larger files.  (At present, -optimize
+mode is always selected when generating progressive JPEG files.)
+
+GIF input files are no longer supported, to avoid the Unisys LZW patent.
+(Conversion of GIF files to JPEG is usually a bad idea anyway.)
+
+
+HINTS FOR DJPEG
+
+To get a quick preview of an image, use the -grayscale and/or -scale switches.
+"-grayscale -scale 1/8" is the fastest case.
+
+Several options are available that trade off image quality to gain speed.
+"-fast" turns on the recommended settings.
+
+"-dct fast" and/or "-nosmooth" gain speed at a small sacrifice in quality.
+When producing a color-quantized image, "-onepass -dither ordered" is fast but
+much lower quality than the default behavior.  "-dither none" may give
+acceptable results in two-pass mode, but is seldom tolerable in one-pass mode.
+
+If you are fortunate enough to have very fast floating point hardware,
+"-dct float" may be even faster than "-dct fast".  But on most machines
+"-dct float" is slower than "-dct int"; in this case it is not worth using,
+because its theoretical accuracy advantage is too small to be significant
+in practice.
+
+Two-pass color quantization requires a good deal of memory; on MS-DOS machines
+it may run out of memory even with -maxmemory 0.  In that case you can still
+decompress, with some loss of image quality, by specifying -onepass for
+one-pass quantization.
+
+To avoid the Unisys LZW patent, djpeg produces uncompressed GIF files.  These
+are larger than they should be, but are readable by standard GIF decoders.
+
+
+HINTS FOR BOTH PROGRAMS
+
+If more space is needed than will fit in the available main memory (as
+determined by -maxmemory), temporary files will be used.  (MS-DOS versions
+will try to get extended or expanded memory first.)  The temporary files are
+often rather large: in typical cases they occupy three bytes per pixel, for
+example 3*800*600 = 1.44Mb for an 800x600 image.  If you don't have enough
+free disk space, leave out -progressive and -optimize (for cjpeg) or specify
+-onepass (for djpeg).
+
+On MS-DOS, the temporary files are created in the directory named by the TMP
+or TEMP environment variable, or in the current directory if neither of those
+exist.  Amiga implementations put the temp files in the directory named by
+JPEGTMP:, so be sure to assign JPEGTMP: to a disk partition with adequate free
+space.
+
+The default memory usage limit (-maxmemory) is set when the software is
+compiled.  If you get an "insufficient memory" error, try specifying a smaller
+-maxmemory value, even -maxmemory 0 to use the absolute minimum space.  You
+may want to recompile with a smaller default value if this happens often.
+
+On machines that have "environment" variables, you can define the environment
+variable JPEGMEM to set the default memory limit.  The value is specified as
+described for the -maxmemory switch.  JPEGMEM overrides the default value
+specified when the program was compiled, and itself is overridden by an
+explicit -maxmemory switch.
+
+On MS-DOS machines, -maxmemory is the amount of main (conventional) memory to
+use.  (Extended or expanded memory is also used if available.)  Most
+DOS-specific versions of this software do their own memory space estimation
+and do not need you to specify -maxmemory.
+
+
+JPEGTRAN
+
+jpegtran performs various useful transformations of JPEG files.
+It can translate the coded representation from one variant of JPEG to another,
+for example from baseline JPEG to progressive JPEG or vice versa.  It can also
+perform some rearrangements of the image data, for example turning an image
+from landscape to portrait format by rotation.
+
+jpegtran works by rearranging the compressed data (DCT coefficients), without
+ever fully decoding the image.  Therefore, its transformations are lossless:
+there is no image degradation at all, which would not be true if you used
+djpeg followed by cjpeg to accomplish the same conversion.  But by the same
+token, jpegtran cannot perform lossy operations such as changing the image
+quality.
+
+jpegtran uses a command line syntax similar to cjpeg or djpeg.
+On Unix-like systems, you say:
+	jpegtran [switches] [inputfile] >outputfile
+On most non-Unix systems, you say:
+	jpegtran [switches] inputfile outputfile
+where both the input and output files are JPEG files.
+
+To specify the coded JPEG representation used in the output file,
+jpegtran accepts a subset of the switches recognized by cjpeg:
+	-optimize	Perform optimization of entropy encoding parameters.
+	-progressive	Create progressive JPEG file.
+	-restart N	Emit a JPEG restart marker every N MCU rows, or every
+			N MCU blocks if "B" is attached to the number.
+	-arithmetic	Use arithmetic coding.
+	-scans file	Use the scan script given in the specified text file.
+See the previous discussion of cjpeg for more details about these switches.
+If you specify none of these switches, you get a plain baseline-JPEG output
+file.  The quality setting and so forth are determined by the input file.
+
+The image can be losslessly transformed by giving one of these switches:
+	-flip horizontal	Mirror image horizontally (left-right).
+	-flip vertical		Mirror image vertically (top-bottom).
+	-rotate 90		Rotate image 90 degrees clockwise.
+	-rotate 180		Rotate image 180 degrees.
+	-rotate 270		Rotate image 270 degrees clockwise (or 90 ccw).
+	-transpose		Transpose image (across UL-to-LR axis).
+	-transverse		Transverse transpose (across UR-to-LL axis).
+
+The transpose transformation has no restrictions regarding image dimensions.
+The other transformations operate rather oddly if the image dimensions are not
+a multiple of the iMCU size (usually 8 or 16 pixels), because they can only
+transform complete blocks of DCT coefficient data in the desired way.
+
+jpegtran's default behavior when transforming an odd-size image is designed
+to preserve exact reversibility and mathematical consistency of the
+transformation set.  As stated, transpose is able to flip the entire image
+area.  Horizontal mirroring leaves any partial iMCU column at the right edge
+untouched, but is able to flip all rows of the image.  Similarly, vertical
+mirroring leaves any partial iMCU row at the bottom edge untouched, but is
+able to flip all columns.  The other transforms can be built up as sequences
+of transpose and flip operations; for consistency, their actions on edge
+pixels are defined to be the same as the end result of the corresponding
+transpose-and-flip sequence.
+
+For practical use, you may prefer to discard any untransformable edge pixels
+rather than having a strange-looking strip along the right and/or bottom edges
+of a transformed image.  To do this, add the -trim switch:
+	-trim		Drop non-transformable edge blocks.
+Obviously, a transformation with -trim is not reversible, so strictly speaking
+jpegtran with this switch is not lossless.  Also, the expected mathematical
+equivalences between the transformations no longer hold.  For example,
+"-rot 270 -trim" trims only the bottom edge, but "-rot 90 -trim" followed by
+"-rot 180 -trim" trims both edges.
+
+If you are only interested in perfect transformation, add the -perfect switch:
+	-perfect	Fails with an error if the transformation is not
+			perfect.
+For example you may want to do
+  jpegtran -rot 90 -perfect foo.jpg || djpeg foo.jpg | pnmflip -r90 | cjpeg
+to do a perfect rotation if available or an approximated one if not.
+
+We also offer a lossless-crop option, which discards data outside a given
+image region but losslessly preserves what is inside.  Like the rotate and
+flip transforms, lossless crop is restricted by the current JPEG format: the
+upper left corner of the selected region must fall on an iMCU boundary.  If
+this does not hold for the given crop parameters, we silently move the upper
+left corner up and/or left to make it so, simultaneously increasing the region
+dimensions to keep the lower right crop corner unchanged.  (Thus, the output
+image covers at least the requested region, but may cover more.)
+
+The image can be losslessly cropped by giving the switch:
+	-crop WxH+X+Y	Crop to a rectangular subarea of width W, height H
+			starting at point X,Y.
+
+Other not-strictly-lossless transformation switches are:
+
+	-grayscale	Force grayscale output.
+This option discards the chrominance channels if the input image is YCbCr
+(ie, a standard color JPEG), resulting in a grayscale JPEG file.  The
+luminance channel is preserved exactly, so this is a better method of reducing
+to grayscale than decompression, conversion, and recompression.  This switch
+is particularly handy for fixing a monochrome picture that was mistakenly
+encoded as a color JPEG.  (In such a case, the space savings from getting rid
+of the near-empty chroma channels won't be large; but the decoding time for
+a grayscale JPEG is substantially less than that for a color JPEG.)
+
+	-scale M/N	Scale the output image by a factor M/N.
+Currently supported scale factors are M/N with all M from 1 to 16, where N is
+the source DCT size, which is 8 for baseline JPEG.  If the /N part is omitted,
+then M specifies the DCT scaled size to be applied on the given input.  For
+baseline JPEG this is equivalent to M/8 scaling, since the source DCT size
+for baseline JPEG is 8.  CAUTION: An implementation of the JPEG SmartScale
+extension is required for this feature.  SmartScale enabled JPEG is not yet
+widely implemented, so many decoders will be unable to view a SmartScale
+extended JPEG file at all.
+
+jpegtran also recognizes these switches that control what to do with "extra"
+markers, such as comment blocks:
+	-copy none	Copy no extra markers from source file.  This setting
+			suppresses all comments and other excess baggage
+			present in the source file.
+	-copy comments	Copy only comment markers.  This setting copies
+			comments from the source file, but discards
+			any other inessential (for image display) data.
+	-copy all	Copy all extra markers.  This setting preserves
+			miscellaneous markers found in the source file, such
+			as JFIF thumbnails, Exif data, and Photoshop settings.
+			In some files these extra markers can be sizable.
+The default behavior is -copy comments.  (Note: in IJG releases v6 and v6a,
+jpegtran always did the equivalent of -copy none.)
+
+Additional switches recognized by jpegtran are:
+	-outfile filename
+	-maxmemory N
+	-verbose
+	-debug
+These work the same as in cjpeg or djpeg.
+
+
+THE COMMENT UTILITIES
+
+The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file.
+Although the standard doesn't actually define what COM blocks are for, they
+are widely used to hold user-supplied text strings.  This lets you add
+annotations, titles, index terms, etc to your JPEG files, and later retrieve
+them as text.  COM blocks do not interfere with the image stored in the JPEG
+file.  The maximum size of a COM block is 64K, but you can have as many of
+them as you like in one JPEG file.
+
+We provide two utility programs to display COM block contents and add COM
+blocks to a JPEG file.
+
+rdjpgcom searches a JPEG file and prints the contents of any COM blocks on
+standard output.  The command line syntax is
+	rdjpgcom [-raw] [-verbose] [inputfilename]
+The switch "-raw" (or just "-r") causes rdjpgcom to also output non-printable
+characters in comments, which are normally escaped for security reasons.
+The switch "-verbose" (or just "-v") causes rdjpgcom to also display the JPEG
+image dimensions.  If you omit the input file name from the command line,
+the JPEG file is read from standard input.  (This may not work on some
+operating systems, if binary data can't be read from stdin.)
+
+wrjpgcom adds a COM block, containing text you provide, to a JPEG file.
+Ordinarily, the COM block is added after any existing COM blocks, but you
+can delete the old COM blocks if you wish.  wrjpgcom produces a new JPEG
+file; it does not modify the input file.  DO NOT try to overwrite the input
+file by directing wrjpgcom's output back into it; on most systems this will
+just destroy your file.
+
+The command line syntax for wrjpgcom is similar to cjpeg's.  On Unix-like
+systems, it is
+	wrjpgcom [switches] [inputfilename]
+The output file is written to standard output.  The input file comes from
+the named file, or from standard input if no input file is named.
+
+On most non-Unix systems, the syntax is
+	wrjpgcom [switches] inputfilename outputfilename
+where both input and output file names must be given explicitly.
+
+wrjpgcom understands three switches:
+	-replace		 Delete any existing COM blocks from the file.
+	-comment "Comment text"	 Supply new COM text on command line.
+	-cfile name		 Read text for new COM block from named file.
+(Switch names can be abbreviated.)  If you have only one line of comment text
+to add, you can provide it on the command line with -comment.  The comment
+text must be surrounded with quotes so that it is treated as a single
+argument.  Longer comments can be read from a text file.
+
+If you give neither -comment nor -cfile, then wrjpgcom will read the comment
+text from standard input.  (In this case an input image file name MUST be
+supplied, so that the source JPEG file comes from somewhere else.)  You can
+enter multiple lines, up to 64KB worth.  Type an end-of-file indicator
+(usually control-D or control-Z) to terminate the comment text entry.
+
+wrjpgcom will not add a COM block if the provided comment string is empty.
+Therefore -replace -comment "" can be used to delete all COM blocks from a
+file.
+
+These utility programs do not depend on the IJG JPEG library.  In
+particular, the source code for rdjpgcom is intended as an illustration of
+the minimum amount of code required to parse a JPEG file header correctly.