Initial import from the monolithic Qt.

This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:

http://qt.gitorious.org/qt/pages/GitIntroductionWithQt

If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.

Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12

1 files changed, 619 insertions, 0 deletions

diff --git a/src/3rdparty/zlib/doc/rfc1950.txt b/src/3rdparty/zlib/doc/rfc1950.txt
new file mode 100644
index 0000000000..ce6428a0f2
--- /dev/null
+++ b/src/3rdparty/zlib/doc/rfc1950.txt
@@ -0,0 +1,619 @@
+
+
+
+
+
+
+Network Working Group                                         P. Deutsch
+Request for Comments: 1950                           Aladdin Enterprises
+Category: Informational                                      J-L. Gailly
+                                                                Info-ZIP
+                                                                May 1996
+
+
+         ZLIB Compressed Data Format Specification version 3.3
+
+Status of This Memo
+
+   This memo provides information for the Internet community.  This memo
+   does not specify an Internet standard of any kind.  Distribution of
+   this memo is unlimited.
+
+IESG Note:
+
+   The IESG takes no position on the validity of any Intellectual
+   Property Rights statements contained in this document.
+
+Notices
+
+   Copyright (c) 1996 L. Peter Deutsch and Jean-Loup Gailly
+
+   Permission is granted to copy and distribute this document for any
+   purpose and without charge, including translations into other
+   languages and incorporation into compilations, provided that the
+   copyright notice and this notice are preserved, and that any
+   substantive changes or deletions from the original are clearly
+   marked.
+
+   A pointer to the latest version of this and related documentation in
+   HTML format can be found at the URL
+   <ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html>.
+
+Abstract
+
+   This specification defines a lossless compressed data format.  The
+   data can be produced or consumed, even for an arbitrarily long
+   sequentially presented input data stream, using only an a priori
+   bounded amount of intermediate storage.  The format presently uses
+   the DEFLATE compression method but can be easily extended to use
+   other compression methods.  It can be implemented readily in a manner
+   not covered by patents.  This specification also defines the ADLER-32
+   checksum (an extension and improvement of the Fletcher checksum),
+   used for detection of data corruption, and provides an algorithm for
+   computing it.
+
+
+
+
+Deutsch & Gailly             Informational                      [Page 1]
+
+RFC 1950       ZLIB Compressed Data Format Specification        May 1996
+
+
+Table of Contents
+
+   1. Introduction ................................................... 2
+      1.1. Purpose ................................................... 2
+      1.2. Intended audience ......................................... 3
+      1.3. Scope ..................................................... 3
+      1.4. Compliance ................................................ 3
+      1.5.  Definitions of terms and conventions used ................ 3
+      1.6. Changes from previous versions ............................ 3
+   2. Detailed specification ......................................... 3
+      2.1. Overall conventions ....................................... 3
+      2.2. Data format ............................................... 4
+      2.3. Compliance ................................................ 7
+   3. References ..................................................... 7
+   4. Source code .................................................... 8
+   5. Security Considerations ........................................ 8
+   6. Acknowledgements ............................................... 8
+   7. Authors' Addresses ............................................. 8
+   8. Appendix: Rationale ............................................ 9
+   9. Appendix: Sample code ..........................................10
+
+1. Introduction
+
+   1.1. Purpose
+
+      The purpose of this specification is to define a lossless
+      compressed data format that:
+
+          * Is independent of CPU type, operating system, file system,
+            and character set, and hence can be used for interchange;
+
+          * Can be produced or consumed, even for an arbitrarily long
+            sequentially presented input data stream, using only an a
+            priori bounded amount of intermediate storage, and hence can
+            be used in data communications or similar structures such as
+            Unix filters;
+
+          * Can use a number of different compression methods;
+
+          * Can be implemented readily in a manner not covered by
+            patents, and hence can be practiced freely.
+
+      The data format defined by this specification does not attempt to
+      allow random access to compressed data.
+
+
+
+
+
+
+
+Deutsch & Gailly             Informational                      [Page 2]
+
+RFC 1950       ZLIB Compressed Data Format Specification        May 1996
+
+
+   1.2. Intended audience
+
+      This specification is intended for use by implementors of software
+      to compress data into zlib format and/or decompress data from zlib
+      format.
+
+      The text of the specification assumes a basic background in
+      programming at the level of bits and other primitive data
+      representations.
+
+   1.3. Scope
+
+      The specification specifies a compressed data format that can be
+      used for in-memory compression of a sequence of arbitrary bytes.
+
+   1.4. Compliance
+
+      Unless otherwise indicated below, a compliant decompressor must be
+      able to accept and decompress any data set that conforms to all
+      the specifications presented here; a compliant compressor must
+      produce data sets that conform to all the specifications presented
+      here.
+
+   1.5.  Definitions of terms and conventions used
+
+      byte: 8 bits stored or transmitted as a unit (same as an octet).
+      (For this specification, a byte is exactly 8 bits, even on
+      machines which store a character on a number of bits different
+      from 8.) See below, for the numbering of bits within a byte.
+
+   1.6. Changes from previous versions
+
+      Version 3.1 was the first public release of this specification.
+      In version 3.2, some terminology was changed and the Adler-32
+      sample code was rewritten for clarity.  In version 3.3, the
+      support for a preset dictionary was introduced, and the
+      specification was converted to RFC style.
+
+2. Detailed specification
+
+   2.1. Overall conventions
+
+      In the diagrams below, a box like this:
+
+         +---+
+         |   | <-- the vertical bars might be missing
+         +---+
+
+
+
+
+Deutsch & Gailly             Informational                      [Page 3]
+
+RFC 1950       ZLIB Compressed Data Format Specification        May 1996
+
+
+      represents one byte; a box like this:
+
+         +==============+
+         |              |
+         +==============+
+
+      represents a variable number of bytes.
+
+      Bytes stored within a computer do not have a "bit order", since
+      they are always treated as a unit.  However, a byte considered as
+      an integer between 0 and 255 does have a most- and least-
+      significant bit, and since we write numbers with the most-
+      significant digit on the left, we also write bytes with the most-
+      significant bit on the left.  In the diagrams below, we number the
+      bits of a byte so that bit 0 is the least-significant bit, i.e.,
+      the bits are numbered:
+
+         +--------+
+         |76543210|
+         +--------+
+
+      Within a computer, a number may occupy multiple bytes.  All
+      multi-byte numbers in the format described here are stored with
+      the MOST-significant byte first (at the lower memory address).
+      For example, the decimal number 520 is stored as:
+
+             0     1
+         +--------+--------+
+         |00000010|00001000|
+         +--------+--------+
+          ^        ^
+          |        |
+          |        + less significant byte = 8
+          + more significant byte = 2 x 256
+
+   2.2. Data format
+
+      A zlib stream has the following structure:
+
+           0   1
+         +---+---+
+         |CMF|FLG|   (more-->)
+         +---+---+
+
+
+
+
+
+
+
+
+Deutsch & Gailly             Informational                      [Page 4]
+
+RFC 1950       ZLIB Compressed Data Format Specification        May 1996
+
+
+      (if FLG.FDICT set)
+
+           0   1   2   3
+         +---+---+---+---+
+         |     DICTID    |   (more-->)
+         +---+---+---+---+
+
+         +=====================+---+---+---+---+
+         |...compressed data...|    ADLER32    |
+         +=====================+---+---+---+---+
+
+      Any data which may appear after ADLER32 are not part of the zlib
+      stream.
+
+      CMF (Compression Method and flags)
+         This byte is divided into a 4-bit compression method and a 4-
+         bit information field depending on the compression method.
+
+            bits 0 to 3  CM     Compression method
+            bits 4 to 7  CINFO  Compression info
+
+      CM (Compression method)
+         This identifies the compression method used in the file. CM = 8
+         denotes the "deflate" compression method with a window size up
+         to 32K.  This is the method used by gzip and PNG (see
+         references [1] and [2] in Chapter 3, below, for the reference
+         documents).  CM = 15 is reserved.  It might be used in a future
+         version of this specification to indicate the presence of an
+         extra field before the compressed data.
+
+      CINFO (Compression info)
+         For CM = 8, CINFO is the base-2 logarithm of the LZ77 window
+         size, minus eight (CINFO=7 indicates a 32K window size). Values
+         of CINFO above 7 are not allowed in this version of the
+         specification.  CINFO is not defined in this specification for
+         CM not equal to 8.
+
+      FLG (FLaGs)
+         This flag byte is divided as follows:
+
+            bits 0 to 4  FCHECK  (check bits for CMF and FLG)
+            bit  5       FDICT   (preset dictionary)
+            bits 6 to 7  FLEVEL  (compression level)
+
+         The FCHECK value must be such that CMF and FLG, when viewed as
+         a 16-bit unsigned integer stored in MSB order (CMF*256 + FLG),
+         is a multiple of 31.
+
+
+
+
+Deutsch & Gailly             Informational                      [Page 5]
+
+RFC 1950       ZLIB Compressed Data Format Specification        May 1996
+
+
+      FDICT (Preset dictionary)
+         If FDICT is set, a DICT dictionary identifier is present
+         immediately after the FLG byte. The dictionary is a sequence of
+         bytes which are initially fed to the compressor without
+         producing any compressed output. DICT is the Adler-32 checksum
+         of this sequence of bytes (see the definition of ADLER32
+         below).  The decompressor can use this identifier to determine
+         which dictionary has been used by the compressor.
+
+      FLEVEL (Compression level)
+         These flags are available for use by specific compression
+         methods.  The "deflate" method (CM = 8) sets these flags as
+         follows:
+
+            0 - compressor used fastest algorithm
+            1 - compressor used fast algorithm
+            2 - compressor used default algorithm
+            3 - compressor used maximum compression, slowest algorithm
+
+         The information in FLEVEL is not needed for decompression; it
+         is there to indicate if recompression might be worthwhile.
+
+      compressed data
+         For compression method 8, the compressed data is stored in the
+         deflate compressed data format as described in the document
+         "DEFLATE Compressed Data Format Specification" by L. Peter
+         Deutsch. (See reference [3] in Chapter 3, below)
+
+         Other compressed data formats are not specified in this version
+         of the zlib specification.
+
+      ADLER32 (Adler-32 checksum)
+         This contains a checksum value of the uncompressed data
+         (excluding any dictionary data) computed according to Adler-32
+         algorithm. This algorithm is a 32-bit extension and improvement
+         of the Fletcher algorithm, used in the ITU-T X.224 / ISO 8073
+         standard. See references [4] and [5] in Chapter 3, below)
+
+         Adler-32 is composed of two sums accumulated per byte: s1 is
+         the sum of all bytes, s2 is the sum of all s1 values. Both sums
+         are done modulo 65521. s1 is initialized to 1, s2 to zero.  The
+         Adler-32 checksum is stored as s2*65536 + s1 in most-
+         significant-byte first (network) order.
+
+
+
+
+
+
+
+
+Deutsch & Gailly             Informational                      [Page 6]
+
+RFC 1950       ZLIB Compressed Data Format Specification        May 1996
+
+
+   2.3. Compliance
+
+      A compliant compressor must produce streams with correct CMF, FLG
+      and ADLER32, but need not support preset dictionaries.  When the
+      zlib data format is used as part of another standard data format,
+      the compressor may use only preset dictionaries that are specified
+      by this other data format.  If this other format does not use the
+      preset dictionary feature, the compressor must not set the FDICT
+      flag.
+
+      A compliant decompressor must check CMF, FLG, and ADLER32, and
+      provide an error indication if any of these have incorrect values.
+      A compliant decompressor must give an error indication if CM is
+      not one of the values defined in this specification (only the
+      value 8 is permitted in this version), since another value could
+      indicate the presence of new features that would cause subsequent
+      data to be interpreted incorrectly.  A compliant decompressor must
+      give an error indication if FDICT is set and DICTID is not the
+      identifier of a known preset dictionary.  A decompressor may
+      ignore FLEVEL and still be compliant.  When the zlib data format
+      is being used as a part of another standard format, a compliant
+      decompressor must support all the preset dictionaries specified by
+      the other format. When the other format does not use the preset
+      dictionary feature, a compliant decompressor must reject any
+      stream in which the FDICT flag is set.
+
+3. References
+
+   [1] Deutsch, L.P.,"GZIP Compressed Data Format Specification",
+       available in ftp://ftp.uu.net/pub/archiving/zip/doc/
+
+   [2] Thomas Boutell, "PNG (Portable Network Graphics) specification",
+       available in ftp://ftp.uu.net/graphics/png/documents/
+
+   [3] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification",
+       available in ftp://ftp.uu.net/pub/archiving/zip/doc/
+
+   [4] Fletcher, J. G., "An Arithmetic Checksum for Serial
+       Transmissions," IEEE Transactions on Communications, Vol. COM-30,
+       No. 1, January 1982, pp. 247-252.
+
+   [5] ITU-T Recommendation X.224, Annex D, "Checksum Algorithms,"
+       November, 1993, pp. 144, 145. (Available from
+       gopher://info.itu.ch). ITU-T X.244 is also the same as ISO 8073.
+
+
+
+
+
+
+
+Deutsch & Gailly             Informational                      [Page 7]
+
+RFC 1950       ZLIB Compressed Data Format Specification        May 1996
+
+
+4. Source code
+
+   Source code for a C language implementation of a "zlib" compliant
+   library is available at ftp://ftp.uu.net/pub/archiving/zip/zlib/.
+
+5. Security Considerations
+
+   A decoder that fails to check the ADLER32 checksum value may be
+   subject to undetected data corruption.
+
+6. Acknowledgements
+
+   Trademarks cited in this document are the property of their
+   respective owners.
+
+   Jean-Loup Gailly and Mark Adler designed the zlib format and wrote
+   the related software described in this specification.  Glenn
+   Randers-Pehrson converted this document to RFC and HTML format.
+
+7. Authors' Addresses
+
+   L. Peter Deutsch
+   Aladdin Enterprises
+   203 Santa Margarita Ave.
+   Menlo Park, CA 94025
+
+   Phone: (415) 322-0103 (AM only)
+   FAX:   (415) 322-1734
+   EMail: <ghost@aladdin.com>
+
+
+   Jean-Loup Gailly
+
+   EMail: <gzip@prep.ai.mit.edu>
+
+   Questions about the technical content of this specification can be
+   sent by email to
+
+   Jean-Loup Gailly <gzip@prep.ai.mit.edu> and
+   Mark Adler <madler@alumni.caltech.edu>
+
+   Editorial comments on this specification can be sent by email to
+
+   L. Peter Deutsch <ghost@aladdin.com> and
+   Glenn Randers-Pehrson <randeg@alumni.rpi.edu>
+
+
+
+
+
+
+Deutsch & Gailly             Informational                      [Page 8]
+
+RFC 1950       ZLIB Compressed Data Format Specification        May 1996
+
+
+8. Appendix: Rationale
+
+   8.1. Preset dictionaries
+
+      A preset dictionary is specially useful to compress short input
+      sequences. The compressor can take advantage of the dictionary
+      context to encode the input in a more compact manner. The
+      decompressor can be initialized with the appropriate context by
+      virtually decompressing a compressed version of the dictionary
+      without producing any output. However for certain compression
+      algorithms such as the deflate algorithm this operation can be
+      achieved without actually performing any decompression.
+
+      The compressor and the decompressor must use exactly the same
+      dictionary. The dictionary may be fixed or may be chosen among a
+      certain number of predefined dictionaries, according to the kind
+      of input data. The decompressor can determine which dictionary has
+      been chosen by the compressor by checking the dictionary
+      identifier. This document does not specify the contents of
+      predefined dictionaries, since the optimal dictionaries are
+      application specific. Standard data formats using this feature of
+      the zlib specification must precisely define the allowed
+      dictionaries.
+
+   8.2. The Adler-32 algorithm
+
+      The Adler-32 algorithm is much faster than the CRC32 algorithm yet
+      still provides an extremely low probability of undetected errors.
+
+      The modulo on unsigned long accumulators can be delayed for 5552
+      bytes, so the modulo operation time is negligible.  If the bytes
+      are a, b, c, the second sum is 3a + 2b + c + 3, and so is position
+      and order sensitive, unlike the first sum, which is just a
+      checksum.  That 65521 is prime is important to avoid a possible
+      large class of two-byte errors that leave the check unchanged.
+      (The Fletcher checksum uses 255, which is not prime and which also
+      makes the Fletcher check insensitive to single byte changes 0 <->
+      255.)
+
+      The sum s1 is initialized to 1 instead of zero to make the length
+      of the sequence part of s2, so that the length does not have to be
+      checked separately. (Any sequence of zeroes has a Fletcher
+      checksum of zero.)
+
+
+
+
+
+
+
+
+Deutsch & Gailly             Informational                      [Page 9]
+
+RFC 1950       ZLIB Compressed Data Format Specification        May 1996
+
+
+9. Appendix: Sample code
+
+   The following C code computes the Adler-32 checksum of a data buffer.
+   It is written for clarity, not for speed.  The sample code is in the
+   ANSI C programming language. Non C users may find it easier to read
+   with these hints:
+
+      &      Bitwise AND operator.
+      >>     Bitwise right shift operator. When applied to an
+             unsigned quantity, as here, right shift inserts zero bit(s)
+             at the left.
+      <<     Bitwise left shift operator. Left shift inserts zero
+             bit(s) at the right.
+      ++     "n++" increments the variable n.
+      %      modulo operator: a % b is the remainder of a divided by b.
+
+      #define BASE 65521 /* largest prime smaller than 65536 */
+
+      /*
+         Update a running Adler-32 checksum with the bytes buf[0..len-1]
+       and return the updated checksum. The Adler-32 checksum should be
+       initialized to 1.
+
+       Usage example:
+
+         unsigned long adler = 1L;
+
+         while (read_buffer(buffer, length) != EOF) {
+           adler = update_adler32(adler, buffer, length);
+         }
+         if (adler != original_adler) error();
+      */
+      unsigned long update_adler32(unsigned long adler,
+         unsigned char *buf, int len)
+      {
+        unsigned long s1 = adler & 0xffff;
+        unsigned long s2 = (adler >> 16) & 0xffff;
+        int n;
+
+        for (n = 0; n < len; n++) {
+          s1 = (s1 + buf[n]) % BASE;
+          s2 = (s2 + s1)     % BASE;
+        }
+        return (s2 << 16) + s1;
+      }
+
+      /* Return the adler32 of the bytes buf[0..len-1] */
+
+
+
+
+Deutsch & Gailly             Informational                     [Page 10]
+
+RFC 1950       ZLIB Compressed Data Format Specification        May 1996
+
+
+      unsigned long adler32(unsigned char *buf, int len)
+      {
+        return update_adler32(1L, buf, len);
+      }
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Deutsch & Gailly             Informational                     [Page 11]
+