diff options
Diffstat (limited to 'src/3rdparty/freetype/include/freetype/config')
5 files changed, 1166 insertions, 1147 deletions
diff --git a/src/3rdparty/freetype/include/freetype/config/ftconfig.h b/src/3rdparty/freetype/include/freetype/config/ftconfig.h index eedebf4082..9466603377 100644 --- a/src/3rdparty/freetype/include/freetype/config/ftconfig.h +++ b/src/3rdparty/freetype/include/freetype/config/ftconfig.h @@ -1,39 +1,38 @@ -/***************************************************************************/ -/* */ -/* ftconfig.h */ -/* */ -/* ANSI-specific configuration file (specification only). */ -/* */ -/* Copyright 1996-2018 by */ -/* David Turner, Robert Wilhelm, and Werner Lemberg. */ -/* */ -/* This file is part of the FreeType project, and may only be used, */ -/* modified, and distributed under the terms of the FreeType project */ -/* license, LICENSE.TXT. By continuing to use, modify, or distribute */ -/* this file you indicate that you have read the license and */ -/* understand and accept it fully. */ -/* */ -/***************************************************************************/ - - - /*************************************************************************/ - /* */ - /* This header file contains a number of macro definitions that are used */ - /* by the rest of the engine. Most of the macros here are automatically */ - /* determined at compile time, and you should not need to change it to */ - /* port FreeType, except to compile the library with a non-ANSI */ - /* compiler. */ - /* */ - /* Note however that if some specific modifications are needed, we */ - /* advise you to place a modified copy in your build directory. */ - /* */ - /* The build directory is usually `builds/<system>', and contains */ - /* system-specific files that are always included first when building */ - /* the library. */ - /* */ - /* This ANSI version should stay in `include/config/'. */ - /* */ - /*************************************************************************/ +/**************************************************************************** + * + * ftconfig.h + * + * ANSI-specific configuration file (specification only). + * + * Copyright (C) 1996-2019 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This header file contains a number of macro definitions that are used by + * the rest of the engine. Most of the macros here are automatically + * determined at compile time, and you should not need to change it to port + * FreeType, except to compile the library with a non-ANSI compiler. + * + * Note however that if some specific modifications are needed, we advise + * you to place a modified copy in your build directory. + * + * The build directory is usually `builds/<system>`, and contains + * system-specific files that are always included first when building the + * library. + * + * This ANSI version should stay in `include/config/`. + * + */ #ifndef FTCONFIG_H_ #define FTCONFIG_H_ @@ -46,32 +45,32 @@ FT_BEGIN_HEADER - /*************************************************************************/ - /* */ - /* PLATFORM-SPECIFIC CONFIGURATION MACROS */ - /* */ - /* These macros can be toggled to suit a specific system. The current */ - /* ones are defaults used to compile FreeType in an ANSI C environment */ - /* (16bit compilers are also supported). Copy this file to your own */ - /* `builds/<system>' directory, and edit it to port the engine. */ - /* */ - /*************************************************************************/ + /************************************************************************** + * + * PLATFORM-SPECIFIC CONFIGURATION MACROS + * + * These macros can be toggled to suit a specific system. The current ones + * are defaults used to compile FreeType in an ANSI C environment (16bit + * compilers are also supported). Copy this file to your own + * `builds/<system>` directory, and edit it to port the engine. + * + */ - /* There are systems (like the Texas Instruments 'C54x) where a `char' */ - /* has 16 bits. ANSI C says that sizeof(char) is always 1. Since an */ - /* `int' has 16 bits also for this system, sizeof(int) gives 1 which */ - /* is probably unexpected. */ - /* */ - /* `CHAR_BIT' (defined in limits.h) gives the number of bits in a */ - /* `char' type. */ + /* There are systems (like the Texas Instruments 'C54x) where a `char` */ + /* has 16~bits. ANSI~C says that `sizeof(char)` is always~1. Since an */ + /* `int` has 16~bits also for this system, `sizeof(int)` gives~1 which */ + /* is probably unexpected. */ + /* */ + /* `CHAR_BIT` (defined in `limits.h`) gives the number of bits in a */ + /* `char` type. */ #ifndef FT_CHAR_BIT #define FT_CHAR_BIT CHAR_BIT #endif - /* The size of an `int' type. */ + /* The size of an `int` type. */ #if FT_UINT_MAX == 0xFFFFUL #define FT_SIZEOF_INT ( 16 / FT_CHAR_BIT ) #elif FT_UINT_MAX == 0xFFFFFFFFUL @@ -82,7 +81,7 @@ FT_BEGIN_HEADER #error "Unsupported size of `int' type!" #endif - /* The size of a `long' type. A five-byte `long' (as used e.g. on the */ + /* The size of a `long` type. A five-byte `long` (as used e.g. on the */ /* DM642) is recognized but avoided. */ #if FT_ULONG_MAX == 0xFFFFFFFFUL #define FT_SIZEOF_LONG ( 32 / FT_CHAR_BIT ) @@ -95,35 +94,35 @@ FT_BEGIN_HEADER #endif - /* FT_UNUSED is a macro used to indicate that a given parameter is not */ - /* used -- this is only used to get rid of unpleasant compiler warnings */ + /* `FT_UNUSED` indicates that a given parameter is not used -- */ + /* this is only used to get rid of unpleasant compiler warnings. */ #ifndef FT_UNUSED #define FT_UNUSED( arg ) ( (arg) = (arg) ) #endif - /*************************************************************************/ - /* */ - /* AUTOMATIC CONFIGURATION MACROS */ - /* */ - /* These macros are computed from the ones defined above. Don't touch */ - /* their definition, unless you know precisely what you are doing. No */ - /* porter should need to mess with them. */ - /* */ - /*************************************************************************/ - - - /*************************************************************************/ - /* */ - /* Mac support */ - /* */ - /* This is the only necessary change, so it is defined here instead */ - /* providing a new configuration file. */ - /* */ + /************************************************************************** + * + * AUTOMATIC CONFIGURATION MACROS + * + * These macros are computed from the ones defined above. Don't touch + * their definition, unless you know precisely what you are doing. No + * porter should need to mess with them. + * + */ + + + /************************************************************************** + * + * Mac support + * + * This is the only necessary change, so it is defined here instead + * providing a new configuration file. + */ #if defined( __APPLE__ ) || ( defined( __MWERKS__ ) && defined( macintosh ) ) - /* no Carbon frameworks for 64bit 10.4.x */ - /* AvailabilityMacros.h is available since Mac OS X 10.2, */ - /* so guess the system version by maximum errno before inclusion */ + /* No Carbon frameworks for 64bit 10.4.x. */ + /* `AvailabilityMacros.h` is available since Mac OS X 10.2, */ + /* so guess the system version by maximum errno before inclusion. */ #include <errno.h> #ifdef ECANCELED /* defined since 10.2 */ #include "AvailabilityMacros.h" @@ -143,7 +142,7 @@ FT_BEGIN_HEADER #endif - /* Fix compiler warning with sgi compiler */ + /* Fix compiler warning with sgi compiler. */ #if defined( __sgi ) && !defined( __GNUC__ ) #if defined( _COMPILER_VERSION ) && ( _COMPILER_VERSION >= 730 ) #pragma set woff 3505 @@ -151,33 +150,33 @@ FT_BEGIN_HEADER #endif - /*************************************************************************/ - /* */ - /* <Section> */ - /* basic_types */ - /* */ - /*************************************************************************/ + /************************************************************************** + * + * @section: + * basic_types + * + */ - /*************************************************************************/ - /* */ - /* <Type> */ - /* FT_Int16 */ - /* */ - /* <Description> */ - /* A typedef for a 16bit signed integer type. */ - /* */ + /************************************************************************** + * + * @type: + * FT_Int16 + * + * @description: + * A typedef for a 16bit signed integer type. + */ typedef signed short FT_Int16; - /*************************************************************************/ - /* */ - /* <Type> */ - /* FT_UInt16 */ - /* */ - /* <Description> */ - /* A typedef for a 16bit unsigned integer type. */ - /* */ + /************************************************************************** + * + * @type: + * FT_UInt16 + * + * @description: + * A typedef for a 16bit unsigned integer type. + */ typedef unsigned short FT_UInt16; /* */ @@ -186,50 +185,50 @@ FT_BEGIN_HEADER /* this #if 0 ... #endif clause is for documentation purposes */ #if 0 - /*************************************************************************/ - /* */ - /* <Type> */ - /* FT_Int32 */ - /* */ - /* <Description> */ - /* A typedef for a 32bit signed integer type. The size depends on */ - /* the configuration. */ - /* */ + /************************************************************************** + * + * @type: + * FT_Int32 + * + * @description: + * A typedef for a 32bit signed integer type. The size depends on the + * configuration. + */ typedef signed XXX FT_Int32; - /*************************************************************************/ - /* */ - /* <Type> */ - /* FT_UInt32 */ - /* */ - /* A typedef for a 32bit unsigned integer type. The size depends on */ - /* the configuration. */ - /* */ + /************************************************************************** + * + * @type: + * FT_UInt32 + * + * A typedef for a 32bit unsigned integer type. The size depends on the + * configuration. + */ typedef unsigned XXX FT_UInt32; - /*************************************************************************/ - /* */ - /* <Type> */ - /* FT_Int64 */ - /* */ - /* A typedef for a 64bit signed integer type. The size depends on */ - /* the configuration. Only defined if there is real 64bit support; */ - /* otherwise, it gets emulated with a structure (if necessary). */ - /* */ + /************************************************************************** + * + * @type: + * FT_Int64 + * + * A typedef for a 64bit signed integer type. The size depends on the + * configuration. Only defined if there is real 64bit support; + * otherwise, it gets emulated with a structure (if necessary). + */ typedef signed XXX FT_Int64; - /*************************************************************************/ - /* */ - /* <Type> */ - /* FT_UInt64 */ - /* */ - /* A typedef for a 64bit unsigned integer type. The size depends on */ - /* the configuration. Only defined if there is real 64bit support; */ - /* otherwise, it gets emulated with a structure (if necessary). */ - /* */ + /************************************************************************** + * + * @type: + * FT_UInt64 + * + * A typedef for a 64bit unsigned integer type. The size depends on the + * configuration. Only defined if there is real 64bit support; + * otherwise, it gets emulated with a structure (if necessary). + */ typedef unsigned XXX FT_UInt64; /* */ @@ -251,7 +250,7 @@ FT_BEGIN_HEADER #endif - /* look up an integer type that is at least 32 bits */ + /* look up an integer type that is at least 32~bits */ #if FT_SIZEOF_INT >= ( 32 / FT_CHAR_BIT ) typedef int FT_Fast; @@ -265,22 +264,22 @@ FT_BEGIN_HEADER #endif - /* determine whether we have a 64-bit int type for platforms without */ - /* Autoconf */ + /* determine whether we have a 64-bit `int` type for platforms without */ + /* Autoconf */ #if FT_SIZEOF_LONG == ( 64 / FT_CHAR_BIT ) - /* FT_LONG64 must be defined if a 64-bit type is available */ + /* `FT_LONG64` must be defined if a 64-bit type is available */ #define FT_LONG64 #define FT_INT64 long #define FT_UINT64 unsigned long - /*************************************************************************/ - /* */ - /* A 64-bit data type may create compilation problems if you compile */ - /* in strict ANSI mode. To avoid them, we disable other 64-bit data */ - /* types if __STDC__ is defined. You can however ignore this rule */ - /* by defining the FT_CONFIG_OPTION_FORCE_INT64 configuration macro. */ - /* */ + /************************************************************************** + * + * A 64-bit data type may create compilation problems if you compile in + * strict ANSI mode. To avoid them, we disable other 64-bit data types if + * `__STDC__` is defined. You can however ignore this rule by defining the + * `FT_CONFIG_OPTION_FORCE_INT64` configuration macro. + */ #elif !defined( __STDC__ ) || defined( FT_CONFIG_OPTION_FORCE_INT64 ) #if defined( __STDC_VERSION__ ) && __STDC_VERSION__ >= 199901L @@ -289,19 +288,19 @@ FT_BEGIN_HEADER #define FT_INT64 long long int #define FT_UINT64 unsigned long long int -#elif defined( _MSC_VER ) && _MSC_VER >= 900 /* Visual C++ (and Intel C++) */ +#elif defined( _MSC_VER ) && _MSC_VER >= 900 /* Visual C++ (and Intel C++) */ - /* this compiler provides the __int64 type */ + /* this compiler provides the `__int64` type */ #define FT_LONG64 #define FT_INT64 __int64 #define FT_UINT64 unsigned __int64 #elif defined( __BORLANDC__ ) /* Borland C++ */ - /* XXXX: We should probably check the value of __BORLANDC__ in order */ - /* to test the compiler version. */ + /* XXXX: We should probably check the value of `__BORLANDC__` in order */ + /* to test the compiler version. */ - /* this compiler provides the __int64 type */ + /* this compiler provides the `__int64` type */ #define FT_LONG64 #define FT_INT64 __int64 #define FT_UINT64 unsigned __int64 @@ -318,7 +317,7 @@ FT_BEGIN_HEADER #elif defined( __GNUC__ ) - /* GCC provides the `long long' type */ + /* GCC provides the `long long` type */ #define FT_LONG64 #define FT_INT64 long long int #define FT_UINT64 unsigned long long int @@ -342,11 +341,11 @@ FT_BEGIN_HEADER #endif - /*************************************************************************/ - /* */ - /* miscellaneous */ - /* */ - /*************************************************************************/ + /************************************************************************** + * + * miscellaneous + * + */ #define FT_BEGIN_STMNT do { @@ -354,7 +353,7 @@ FT_BEGIN_HEADER #define FT_DUMMY_STMNT FT_BEGIN_STMNT FT_END_STMNT - /* typeof condition taken from gnulib's `intprops.h' header file */ + /* `typeof` condition taken from gnulib's `intprops.h` header file */ #if ( ( defined( __GNUC__ ) && __GNUC__ >= 2 ) || \ ( defined( __IBMC__ ) && __IBMC__ >= 1210 && \ defined( __IBM__TYPEOF__ ) ) || \ @@ -365,14 +364,14 @@ FT_BEGIN_HEADER #endif - /* Use FT_LOCAL and FT_LOCAL_DEF to declare and define, respectively, */ - /* a function that gets used only within the scope of a module. */ - /* Normally, both the header and source code files for such a */ - /* function are within a single module directory. */ - /* */ - /* Intra-module arrays should be tagged with FT_LOCAL_ARRAY and */ - /* FT_LOCAL_ARRAY_DEF. */ - /* */ + /* Use `FT_LOCAL` and `FT_LOCAL_DEF` to declare and define, */ + /* respectively, a function that gets used only within the scope of a */ + /* module. Normally, both the header and source code files for such a */ + /* function are within a single module directory. */ + /* */ + /* Intra-module arrays should be tagged with `FT_LOCAL_ARRAY` and */ + /* `FT_LOCAL_ARRAY_DEF`. */ + /* */ #ifdef FT_MAKE_OPTION_SINGLE_OBJECT #define FT_LOCAL( x ) static x @@ -394,12 +393,12 @@ FT_BEGIN_HEADER #define FT_LOCAL_ARRAY_DEF( x ) const x - /* Use FT_BASE and FT_BASE_DEF to declare and define, respectively, */ - /* functions that are used in more than a single module. In the */ - /* current setup this implies that the declaration is in a header */ - /* file in the `include/freetype/internal' directory, and the */ - /* function body is in a file in `src/base'. */ - /* */ + /* Use `FT_BASE` and `FT_BASE_DEF` to declare and define, respectively, */ + /* functions that are used in more than a single module. In the */ + /* current setup this implies that the declaration is in a header file */ + /* in the `include/freetype/internal` directory, and the function body */ + /* is in a file in `src/base`. */ + /* */ #ifndef FT_BASE #ifdef __cplusplus @@ -422,45 +421,50 @@ FT_BEGIN_HEADER #endif /* !FT_BASE_DEF */ - /* When compiling FreeType as a DLL or DSO with hidden visibility */ - /* some systems/compilers need a special attribute in front OR after */ - /* the return type of function declarations. */ - /* */ - /* Two macros are used within the FreeType source code to define */ - /* exported library functions: FT_EXPORT and FT_EXPORT_DEF. */ - /* */ - /* FT_EXPORT( return_type ) */ - /* */ - /* is used in a function declaration, as in */ - /* */ - /* FT_EXPORT( FT_Error ) */ - /* FT_Init_FreeType( FT_Library* alibrary ); */ - /* */ - /* */ - /* FT_EXPORT_DEF( return_type ) */ - /* */ - /* is used in a function definition, as in */ - /* */ - /* FT_EXPORT_DEF( FT_Error ) */ - /* FT_Init_FreeType( FT_Library* alibrary ) */ - /* { */ - /* ... some code ... */ - /* return FT_Err_Ok; */ - /* } */ - /* */ - /* You can provide your own implementation of FT_EXPORT and */ - /* FT_EXPORT_DEF here if you want. */ - /* */ - /* To export a variable, use FT_EXPORT_VAR. */ - /* */ + /* When compiling FreeType as a DLL or DSO with hidden visibility */ + /* some systems/compilers need a special attribute in front OR after */ + /* the return type of function declarations. */ + /* */ + /* Two macros are used within the FreeType source code to define */ + /* exported library functions: `FT_EXPORT` and `FT_EXPORT_DEF`. */ + /* */ + /* - `FT_EXPORT( return_type )` */ + /* */ + /* is used in a function declaration, as in */ + /* */ + /* ``` */ + /* FT_EXPORT( FT_Error ) */ + /* FT_Init_FreeType( FT_Library* alibrary ); */ + /* ``` */ + /* */ + /* - `FT_EXPORT_DEF( return_type )` */ + /* */ + /* is used in a function definition, as in */ + /* */ + /* ``` */ + /* FT_EXPORT_DEF( FT_Error ) */ + /* FT_Init_FreeType( FT_Library* alibrary ) */ + /* { */ + /* ... some code ... */ + /* return FT_Err_Ok; */ + /* } */ + /* ``` */ + /* */ + /* You can provide your own implementation of `FT_EXPORT` and */ + /* `FT_EXPORT_DEF` here if you want. */ + /* */ + /* To export a variable, use `FT_EXPORT_VAR`. */ + /* */ #ifndef FT_EXPORT #ifdef FT2_BUILD_LIBRARY -#if defined( _WIN32 ) && ( defined( _DLL ) || defined( DLL_EXPORT ) ) +#if defined( _WIN32 ) && defined( DLL_EXPORT ) #define FT_EXPORT( x ) __declspec( dllexport ) x #elif defined( __GNUC__ ) && __GNUC__ >= 4 #define FT_EXPORT( x ) __attribute__(( visibility( "default" ) )) x +#elif defined( __SUNPRO_C ) && __SUNPRO_C >= 0x550 +#define FT_EXPORT( x ) __global x #elif defined( __cplusplus ) #define FT_EXPORT( x ) extern "C" x #else @@ -469,7 +473,7 @@ FT_BEGIN_HEADER #else -#if defined( FT2_DLLIMPORT ) +#if defined( _WIN32 ) && defined( DLL_IMPORT ) #define FT_EXPORT( x ) __declspec( dllimport ) x #elif defined( __cplusplus ) #define FT_EXPORT( x ) extern "C" x @@ -508,7 +512,7 @@ FT_BEGIN_HEADER /* C++ compiler and with 16bit compilers. */ /* */ - /* This is special. Within C++, you must specify `extern "C"' for */ + /* This is special. Within C++, you must specify `extern "C"` for */ /* functions which are used via function pointers, and you also */ /* must do that for structures which contain function pointers to */ /* assure C linkage -- it's not possible to have (local) anonymous */ @@ -531,7 +535,7 @@ FT_BEGIN_HEADER /* */ /* */ /* Some 16bit compilers have to redefine these macros to insert */ - /* the infamous `_cdecl' or `__fastcall' declarations. */ + /* the infamous `_cdecl` or `__fastcall` declarations. */ /* */ #ifndef FT_CALLBACK_DEF #ifdef __cplusplus diff --git a/src/3rdparty/freetype/include/freetype/config/ftheader.h b/src/3rdparty/freetype/include/freetype/config/ftheader.h index 702f77cc42..696d6ba906 100644 --- a/src/3rdparty/freetype/include/freetype/config/ftheader.h +++ b/src/3rdparty/freetype/include/freetype/config/ftheader.h @@ -1,19 +1,19 @@ -/***************************************************************************/ -/* */ -/* ftheader.h */ -/* */ -/* Build macros of the FreeType 2 library. */ -/* */ -/* Copyright 1996-2018 by */ -/* David Turner, Robert Wilhelm, and Werner Lemberg. */ -/* */ -/* This file is part of the FreeType project, and may only be used, */ -/* modified, and distributed under the terms of the FreeType project */ -/* license, LICENSE.TXT. By continuing to use, modify, or distribute */ -/* this file you indicate that you have read the license and */ -/* understand and accept it fully. */ -/* */ -/***************************************************************************/ +/**************************************************************************** + * + * ftheader.h + * + * Build macros of the FreeType 2 library. + * + * Copyright (C) 1996-2019 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ #ifndef FTHEADER_H_ #define FTHEADER_H_ @@ -27,7 +27,7 @@ /* <Description> */ /* This macro is used in association with @FT_END_HEADER in header */ /* files to ensure that the declarations within are properly */ - /* encapsulated in an `extern "C" { .. }' block when included from a */ + /* encapsulated in an `extern "C" { .. }` block when included from a */ /* C++ compiler. */ /* */ #ifdef __cplusplus @@ -45,7 +45,7 @@ /* <Description> */ /* This macro is used in association with @FT_BEGIN_HEADER in header */ /* files to ensure that the declarations within are properly */ - /* encapsulated in an `extern "C" { .. }' block when included from a */ + /* encapsulated in an `extern "C" { .. }` block when included from a */ /* C++ compiler. */ /* */ #ifdef __cplusplus @@ -55,54 +55,54 @@ #endif - /*************************************************************************/ - /* */ - /* Aliases for the FreeType 2 public and configuration files. */ - /* */ - /*************************************************************************/ + /************************************************************************** + * + * Aliases for the FreeType 2 public and configuration files. + * + */ - /*************************************************************************/ - /* */ - /* <Section> */ - /* header_file_macros */ - /* */ - /* <Title> */ - /* Header File Macros */ - /* */ - /* <Abstract> */ - /* Macro definitions used to #include specific header files. */ - /* */ - /* <Description> */ - /* The following macros are defined to the name of specific */ - /* FreeType~2 header files. They can be used directly in #include */ - /* statements as in: */ - /* */ - /* { */ - /* #include FT_FREETYPE_H */ - /* #include FT_MULTIPLE_MASTERS_H */ - /* #include FT_GLYPH_H */ - /* } */ - /* */ - /* There are several reasons why we are now using macros to name */ - /* public header files. The first one is that such macros are not */ - /* limited to the infamous 8.3~naming rule required by DOS (and */ - /* `FT_MULTIPLE_MASTERS_H' is a lot more meaningful than `ftmm.h'). */ - /* */ - /* The second reason is that it allows for more flexibility in the */ - /* way FreeType~2 is installed on a given system. */ - /* */ - /*************************************************************************/ + /************************************************************************** + * + * @section: + * header_file_macros + * + * @title: + * Header File Macros + * + * @abstract: + * Macro definitions used to `#include` specific header files. + * + * @description: + * The following macros are defined to the name of specific FreeType~2 + * header files. They can be used directly in `#include` statements as + * in: + * + * ``` + * #include FT_FREETYPE_H + * #include FT_MULTIPLE_MASTERS_H + * #include FT_GLYPH_H + * ``` + * + * There are several reasons why we are now using macros to name public + * header files. The first one is that such macros are not limited to + * the infamous 8.3~naming rule required by DOS (and + * `FT_MULTIPLE_MASTERS_H` is a lot more meaningful than `ftmm.h`). + * + * The second reason is that it allows for more flexibility in the way + * FreeType~2 is installed on a given system. + * + */ /* configuration files */ - /************************************************************************* + /************************************************************************** * * @macro: * FT_CONFIG_CONFIG_H * * @description: - * A macro used in #include statements to name the file containing + * A macro used in `#include` statements to name the file containing * FreeType~2 configuration data. * */ @@ -111,13 +111,13 @@ #endif - /************************************************************************* + /************************************************************************** * * @macro: * FT_CONFIG_STANDARD_LIBRARY_H * * @description: - * A macro used in #include statements to name the file containing + * A macro used in `#include` statements to name the file containing * FreeType~2 interface to the standard C library functions. * */ @@ -126,13 +126,13 @@ #endif - /************************************************************************* + /************************************************************************** * * @macro: * FT_CONFIG_OPTIONS_H * * @description: - * A macro used in #include statements to name the file containing + * A macro used in `#include` statements to name the file containing * FreeType~2 project-specific configuration options. * */ @@ -141,13 +141,13 @@ #endif - /************************************************************************* + /************************************************************************** * * @macro: * FT_CONFIG_MODULES_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * list of FreeType~2 modules that are statically linked to new library * instances in @FT_Init_FreeType. * @@ -160,26 +160,26 @@ /* public headers */ - /************************************************************************* + /************************************************************************** * * @macro: * FT_FREETYPE_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * base FreeType~2 API. * */ #define FT_FREETYPE_H <freetype/freetype.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_ERRORS_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * list of FreeType~2 error codes (and messages). * * It is included by @FT_FREETYPE_H. @@ -188,26 +188,26 @@ #define FT_ERRORS_H <freetype/fterrors.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_MODULE_ERRORS_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * list of FreeType~2 module error offsets (and messages). * */ #define FT_MODULE_ERRORS_H <freetype/ftmoderr.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_SYSTEM_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * FreeType~2 interface to low-level operations (i.e., memory management * and stream i/o). * @@ -217,13 +217,13 @@ #define FT_SYSTEM_H <freetype/ftsystem.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_IMAGE_H * * @description: - * A macro used in #include statements to name the file containing type + * A macro used in `#include` statements to name the file containing type * definitions related to glyph images (i.e., bitmaps, outlines, * scan-converter parameters). * @@ -233,13 +233,13 @@ #define FT_IMAGE_H <freetype/ftimage.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_TYPES_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * basic data types defined by FreeType~2. * * It is included by @FT_FREETYPE_H. @@ -248,13 +248,13 @@ #define FT_TYPES_H <freetype/fttypes.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_LIST_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * list management API of FreeType~2. * * (Most applications will never need to include this file.) @@ -263,151 +263,151 @@ #define FT_LIST_H <freetype/ftlist.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_OUTLINE_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * scalable outline management API of FreeType~2. * */ #define FT_OUTLINE_H <freetype/ftoutln.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_SIZES_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * API which manages multiple @FT_Size objects per face. * */ #define FT_SIZES_H <freetype/ftsizes.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_MODULE_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * module management API of FreeType~2. * */ #define FT_MODULE_H <freetype/ftmodapi.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_RENDER_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * renderer module management API of FreeType~2. * */ #define FT_RENDER_H <freetype/ftrender.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_DRIVER_H * * @description: - * A macro used in #include statements to name the file containing + * A macro used in `#include` statements to name the file containing * structures and macros related to the driver modules. * */ #define FT_DRIVER_H <freetype/ftdriver.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_AUTOHINTER_H * * @description: - * A macro used in #include statements to name the file containing + * A macro used in `#include` statements to name the file containing * structures and macros related to the auto-hinting module. * - * Deprecated since version 2.9; use @FT_DRIVER_H instead. + * Deprecated since version~2.9; use @FT_DRIVER_H instead. * */ #define FT_AUTOHINTER_H FT_DRIVER_H - /************************************************************************* + /************************************************************************** * * @macro: * FT_CFF_DRIVER_H * * @description: - * A macro used in #include statements to name the file containing + * A macro used in `#include` statements to name the file containing * structures and macros related to the CFF driver module. * - * Deprecated since version 2.9; use @FT_DRIVER_H instead. + * Deprecated since version~2.9; use @FT_DRIVER_H instead. * */ #define FT_CFF_DRIVER_H FT_DRIVER_H - /************************************************************************* + /************************************************************************** * * @macro: * FT_TRUETYPE_DRIVER_H * * @description: - * A macro used in #include statements to name the file containing + * A macro used in `#include` statements to name the file containing * structures and macros related to the TrueType driver module. * - * Deprecated since version 2.9; use @FT_DRIVER_H instead. + * Deprecated since version~2.9; use @FT_DRIVER_H instead. * */ #define FT_TRUETYPE_DRIVER_H FT_DRIVER_H - /************************************************************************* + /************************************************************************** * * @macro: * FT_PCF_DRIVER_H * * @description: - * A macro used in #include statements to name the file containing + * A macro used in `#include` statements to name the file containing * structures and macros related to the PCF driver module. * - * Deprecated since version 2.9; use @FT_DRIVER_H instead. + * Deprecated since version~2.9; use @FT_DRIVER_H instead. * */ #define FT_PCF_DRIVER_H FT_DRIVER_H - /************************************************************************* + /************************************************************************** * * @macro: * FT_TYPE1_TABLES_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * types and API specific to the Type~1 format. * */ #define FT_TYPE1_TABLES_H <freetype/t1tables.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_TRUETYPE_IDS_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * enumeration values which identify name strings, languages, encodings, * etc. This file really contains a _large_ set of constant macro * definitions, taken from the TrueType and OpenType specifications. @@ -416,174 +416,172 @@ #define FT_TRUETYPE_IDS_H <freetype/ttnameid.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_TRUETYPE_TABLES_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * types and API specific to the TrueType (as well as OpenType) format. * */ #define FT_TRUETYPE_TABLES_H <freetype/tttables.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_TRUETYPE_TAGS_H * * @description: - * A macro used in #include statements to name the file containing the - * definitions of TrueType four-byte `tags' which identify blocks in + * A macro used in `#include` statements to name the file containing the + * definitions of TrueType four-byte 'tags' which identify blocks in * SFNT-based font formats (i.e., TrueType and OpenType). * */ #define FT_TRUETYPE_TAGS_H <freetype/tttags.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_BDF_H * * @description: - * A macro used in #include statements to name the file containing the - * definitions of an API which accesses BDF-specific strings from a - * face. + * A macro used in `#include` statements to name the file containing the + * definitions of an API which accesses BDF-specific strings from a face. * */ #define FT_BDF_H <freetype/ftbdf.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_CID_H * * @description: - * A macro used in #include statements to name the file containing the - * definitions of an API which access CID font information from a - * face. + * A macro used in `#include` statements to name the file containing the + * definitions of an API which access CID font information from a face. * */ #define FT_CID_H <freetype/ftcid.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_GZIP_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * definitions of an API which supports gzip-compressed files. * */ #define FT_GZIP_H <freetype/ftgzip.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_LZW_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * definitions of an API which supports LZW-compressed files. * */ #define FT_LZW_H <freetype/ftlzw.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_BZIP2_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * definitions of an API which supports bzip2-compressed files. * */ #define FT_BZIP2_H <freetype/ftbzip2.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_WINFONTS_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * definitions of an API which supports Windows FNT files. * */ #define FT_WINFONTS_H <freetype/ftwinfnt.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_GLYPH_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * API of the optional glyph management component. * */ #define FT_GLYPH_H <freetype/ftglyph.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_BITMAP_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * API of the optional bitmap conversion component. * */ #define FT_BITMAP_H <freetype/ftbitmap.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_BBOX_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * API of the optional exact bounding box computation routines. * */ #define FT_BBOX_H <freetype/ftbbox.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_CACHE_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * API of the optional FreeType~2 cache sub-system. * */ #define FT_CACHE_H <freetype/ftcache.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_MAC_H * * @description: - * A macro used in #include statements to name the file containing the - * Macintosh-specific FreeType~2 API. The latter is used to access - * fonts embedded in resource forks. + * A macro used in `#include` statements to name the file containing the + * Macintosh-specific FreeType~2 API. The latter is used to access fonts + * embedded in resource forks. * * This header file must be explicitly included by client applications * compiled on the Mac (note that the base API still works though). @@ -592,105 +590,105 @@ #define FT_MAC_H <freetype/ftmac.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_MULTIPLE_MASTERS_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * optional multiple-masters management API of FreeType~2. * */ #define FT_MULTIPLE_MASTERS_H <freetype/ftmm.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_SFNT_NAMES_H * * @description: - * A macro used in #include statements to name the file containing the - * optional FreeType~2 API which accesses embedded `name' strings in + * A macro used in `#include` statements to name the file containing the + * optional FreeType~2 API which accesses embedded 'name' strings in * SFNT-based font formats (i.e., TrueType and OpenType). * */ #define FT_SFNT_NAMES_H <freetype/ftsnames.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_OPENTYPE_VALIDATE_H * * @description: - * A macro used in #include statements to name the file containing the - * optional FreeType~2 API which validates OpenType tables (BASE, GDEF, - * GPOS, GSUB, JSTF). + * A macro used in `#include` statements to name the file containing the + * optional FreeType~2 API which validates OpenType tables ('BASE', + * 'GDEF', 'GPOS', 'GSUB', 'JSTF'). * */ #define FT_OPENTYPE_VALIDATE_H <freetype/ftotval.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_GX_VALIDATE_H * * @description: - * A macro used in #include statements to name the file containing the - * optional FreeType~2 API which validates TrueTypeGX/AAT tables (feat, - * mort, morx, bsln, just, kern, opbd, trak, prop). + * A macro used in `#include` statements to name the file containing the + * optional FreeType~2 API which validates TrueTypeGX/AAT tables ('feat', + * 'mort', 'morx', 'bsln', 'just', 'kern', 'opbd', 'trak', 'prop'). * */ #define FT_GX_VALIDATE_H <freetype/ftgxval.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_PFR_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * FreeType~2 API which accesses PFR-specific data. * */ #define FT_PFR_H <freetype/ftpfr.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_STROKER_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * FreeType~2 API which provides functions to stroke outline paths. */ #define FT_STROKER_H <freetype/ftstroke.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_SYNTHESIS_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * FreeType~2 API which performs artificial obliquing and emboldening. */ #define FT_SYNTHESIS_H <freetype/ftsynth.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_FONT_FORMATS_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * FreeType~2 API which provides functions specific to font formats. */ #define FT_FONT_FORMATS_H <freetype/ftfntfmt.h> @@ -699,67 +697,79 @@ #define FT_XFREE86_H FT_FONT_FORMATS_H - /************************************************************************* + /************************************************************************** * * @macro: * FT_TRIGONOMETRY_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * FreeType~2 API which performs trigonometric computations (e.g., * cosines and arc tangents). */ #define FT_TRIGONOMETRY_H <freetype/fttrigon.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_LCD_FILTER_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * FreeType~2 API which performs color filtering for subpixel rendering. */ #define FT_LCD_FILTER_H <freetype/ftlcdfil.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_INCREMENTAL_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * FreeType~2 API which performs incremental glyph loading. */ #define FT_INCREMENTAL_H <freetype/ftincrem.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_GASP_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * FreeType~2 API which returns entries from the TrueType GASP table. */ #define FT_GASP_H <freetype/ftgasp.h> - /************************************************************************* + /************************************************************************** * * @macro: * FT_ADVANCES_H * * @description: - * A macro used in #include statements to name the file containing the + * A macro used in `#include` statements to name the file containing the * FreeType~2 API which returns individual and ranged glyph advances. */ #define FT_ADVANCES_H <freetype/ftadvanc.h> + /************************************************************************** + * + * @macro: + * FT_COLOR_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which handles the OpenType 'CPAL' table. + */ +#define FT_COLOR_H <freetype/ftcolor.h> + + /* */ /* These header files don't need to be included by the user. */ @@ -770,14 +780,14 @@ #define FT_UNPATENTED_HINTING_H <freetype/ftparams.h> #define FT_TRUETYPE_UNPATENTED_H <freetype/ftparams.h> - /* FT_CACHE_H is the only header file needed for the cache subsystem. */ + /* `FT_CACHE_H` is the only header file needed for the cache subsystem. */ #define FT_CACHE_IMAGE_H FT_CACHE_H #define FT_CACHE_SMALL_BITMAPS_H FT_CACHE_H #define FT_CACHE_CHARMAP_H FT_CACHE_H /* The internals of the cache sub-system are no longer exposed. We */ - /* default to FT_CACHE_H at the moment just in case, but we know of */ - /* no rogue client that uses them. */ + /* default to `FT_CACHE_H` at the moment just in case, but we know */ + /* of no rogue client that uses them. */ /* */ #define FT_CACHE_MANAGER_H FT_CACHE_H #define FT_CACHE_INTERNAL_MRU_H FT_CACHE_H @@ -789,8 +799,8 @@ /* - * Include internal headers definitions from <internal/...> - * only when building the library. + * Include internal headers definitions from `<internal/...>` only when + * building the library. */ #ifdef FT2_BUILD_LIBRARY #define FT_INTERNAL_INTERNAL_H <freetype/internal/internal.h> diff --git a/src/3rdparty/freetype/include/freetype/config/ftmodule.h b/src/3rdparty/freetype/include/freetype/config/ftmodule.h index 76d271a74b..7c603e5327 100644 --- a/src/3rdparty/freetype/include/freetype/config/ftmodule.h +++ b/src/3rdparty/freetype/include/freetype/config/ftmodule.h @@ -1,12 +1,12 @@ /* - * This file registers the FreeType modules compiled into the library. + * This file registers the FreeType modules compiled into the library. * - * If you use GNU make, this file IS NOT USED! Instead, it is created in - * the objects directory (normally `<topdir>/objs/') based on information - * from `<topdir>/modules.cfg'. + * If you use GNU make, this file IS NOT USED! Instead, it is created in + * the objects directory (normally `<topdir>/objs/`) based on information + * from `<topdir>/modules.cfg`. * - * Please read `docs/INSTALL.ANY' and `docs/CUSTOMIZE' how to compile - * FreeType without GNU make. + * Please read `docs/INSTALL.ANY` and `docs/CUSTOMIZE` how to compile + * FreeType without GNU make. * */ diff --git a/src/3rdparty/freetype/include/freetype/config/ftoption.h b/src/3rdparty/freetype/include/freetype/config/ftoption.h index 4bcab2af5c..12f47a82e8 100644 --- a/src/3rdparty/freetype/include/freetype/config/ftoption.h +++ b/src/3rdparty/freetype/include/freetype/config/ftoption.h @@ -1,19 +1,19 @@ -/***************************************************************************/ -/* */ -/* ftoption.h */ -/* */ -/* User-selectable configuration macros (specification only). */ -/* */ -/* Copyright 1996-2018 by */ -/* David Turner, Robert Wilhelm, and Werner Lemberg. */ -/* */ -/* This file is part of the FreeType project, and may only be used, */ -/* modified, and distributed under the terms of the FreeType project */ -/* license, LICENSE.TXT. By continuing to use, modify, or distribute */ -/* this file you indicate that you have read the license and */ -/* understand and accept it fully. */ -/* */ -/***************************************************************************/ +/**************************************************************************** + * + * ftoption.h + * + * User-selectable configuration macros (specification only). + * + * Copyright (C) 1996-2019 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ #ifndef FTOPTION_H_ @@ -25,45 +25,47 @@ FT_BEGIN_HEADER - /*************************************************************************/ - /* */ - /* USER-SELECTABLE CONFIGURATION MACROS */ - /* */ - /* This file contains the default configuration macro definitions for */ - /* a standard build of the FreeType library. There are three ways to */ - /* use this file to build project-specific versions of the library: */ - /* */ - /* - You can modify this file by hand, but this is not recommended in */ - /* cases where you would like to build several versions of the */ - /* library from a single source directory. */ - /* */ - /* - You can put a copy of this file in your build directory, more */ - /* precisely in `$BUILD/freetype/config/ftoption.h', where `$BUILD' */ - /* is the name of a directory that is included _before_ the FreeType */ - /* include path during compilation. */ - /* */ - /* The default FreeType Makefiles and Jamfiles use the build */ - /* directory `builds/<system>' by default, but you can easily change */ - /* that for your own projects. */ - /* */ - /* - Copy the file <ft2build.h> to `$BUILD/ft2build.h' and modify it */ - /* slightly to pre-define the macro FT_CONFIG_OPTIONS_H used to */ - /* locate this file during the build. For example, */ - /* */ - /* #define FT_CONFIG_OPTIONS_H <myftoptions.h> */ - /* #include <freetype/config/ftheader.h> */ - /* */ - /* will use `$BUILD/myftoptions.h' instead of this file for macro */ - /* definitions. */ - /* */ - /* Note also that you can similarly pre-define the macro */ - /* FT_CONFIG_MODULES_H used to locate the file listing of the modules */ - /* that are statically linked to the library at compile time. By */ - /* default, this file is <freetype/config/ftmodule.h>. */ - /* */ - /* We highly recommend using the third method whenever possible. */ - /* */ - /*************************************************************************/ + /************************************************************************** + * + * USER-SELECTABLE CONFIGURATION MACROS + * + * This file contains the default configuration macro definitions for a + * standard build of the FreeType library. There are three ways to use + * this file to build project-specific versions of the library: + * + * - You can modify this file by hand, but this is not recommended in + * cases where you would like to build several versions of the library + * from a single source directory. + * + * - You can put a copy of this file in your build directory, more + * precisely in `$BUILD/freetype/config/ftoption.h`, where `$BUILD` is + * the name of a directory that is included _before_ the FreeType include + * path during compilation. + * + * The default FreeType Makefiles and Jamfiles use the build directory + * `builds/<system>` by default, but you can easily change that for your + * own projects. + * + * - Copy the file <ft2build.h> to `$BUILD/ft2build.h` and modify it + * slightly to pre-define the macro `FT_CONFIG_OPTIONS_H` used to locate + * this file during the build. For example, + * + * ``` + * #define FT_CONFIG_OPTIONS_H <myftoptions.h> + * #include <freetype/config/ftheader.h> + * ``` + * + * will use `$BUILD/myftoptions.h` instead of this file for macro + * definitions. + * + * Note also that you can similarly pre-define the macro + * `FT_CONFIG_MODULES_H` used to locate the file listing of the modules + * that are statically linked to the library at compile time. By + * default, this file is `<freetype/config/ftmodule.h>`. + * + * We highly recommend using the third method whenever possible. + * + */ /*************************************************************************/ @@ -75,444 +77,433 @@ FT_BEGIN_HEADER /*************************************************************************/ - /*#***********************************************************************/ - /* */ - /* If you enable this configuration option, FreeType recognizes an */ - /* environment variable called `FREETYPE_PROPERTIES', which can be used */ - /* to control the various font drivers and modules. The controllable */ - /* properties are listed in the section @properties. */ - /* */ - /* You have to undefine this configuration option on platforms that lack */ - /* the concept of environment variables (and thus don't have the */ - /* `getenv' function), for example Windows CE. */ - /* */ - /* `FREETYPE_PROPERTIES' has the following syntax form (broken here into */ - /* multiple lines for better readability). */ - /* */ - /* { */ - /* <optional whitespace> */ - /* <module-name1> ':' */ - /* <property-name1> '=' <property-value1> */ - /* <whitespace> */ - /* <module-name2> ':' */ - /* <property-name2> '=' <property-value2> */ - /* ... */ - /* } */ - /* */ - /* Example: */ - /* */ - /* FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ */ - /* cff:no-stem-darkening=1 \ */ - /* autofitter:warping=1 */ - /* */ + /*#************************************************************************ + * + * If you enable this configuration option, FreeType recognizes an + * environment variable called `FREETYPE_PROPERTIES`, which can be used to + * control the various font drivers and modules. The controllable + * properties are listed in the section @properties. + * + * You have to undefine this configuration option on platforms that lack + * the concept of environment variables (and thus don't have the `getenv` + * function), for example Windows CE. + * + * `FREETYPE_PROPERTIES` has the following syntax form (broken here into + * multiple lines for better readability). + * + * ``` + * <optional whitespace> + * <module-name1> ':' + * <property-name1> '=' <property-value1> + * <whitespace> + * <module-name2> ':' + * <property-name2> '=' <property-value2> + * ... + * ``` + * + * Example: + * + * ``` + * FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ + * cff:no-stem-darkening=1 \ + * autofitter:warping=1 + * ``` + * + */ #define FT_CONFIG_OPTION_ENVIRONMENT_PROPERTIES - /*************************************************************************/ - /* */ - /* Uncomment the line below if you want to activate LCD rendering */ - /* technology similar to ClearType in this build of the library. This */ - /* technology triples the resolution in the direction color subpixels. */ - /* To mitigate color fringes inherent to this technology, you also need */ - /* to explicitly set up LCD filtering. */ - /* */ - /* Note that this feature is covered by several Microsoft patents */ - /* and should not be activated in any default build of the library. */ - /* When this macro is not defined, FreeType offers alternative LCD */ - /* rendering technology that produces excellent output without LCD */ - /* filtering. */ - /* */ + /************************************************************************** + * + * Uncomment the line below if you want to activate LCD rendering + * technology similar to ClearType in this build of the library. This + * technology triples the resolution in the direction color subpixels. To + * mitigate color fringes inherent to this technology, you also need to + * explicitly set up LCD filtering. + * + * Note that this feature is covered by several Microsoft patents and + * should not be activated in any default build of the library. When this + * macro is not defined, FreeType offers alternative LCD rendering + * technology that produces excellent output without LCD filtering. + */ /* #define FT_CONFIG_OPTION_SUBPIXEL_RENDERING */ - /*************************************************************************/ - /* */ - /* Many compilers provide a non-ANSI 64-bit data type that can be used */ - /* by FreeType to speed up some computations. However, this will create */ - /* some problems when compiling the library in strict ANSI mode. */ - /* */ - /* For this reason, the use of 64-bit integers is normally disabled when */ - /* the __STDC__ macro is defined. You can however disable this by */ - /* defining the macro FT_CONFIG_OPTION_FORCE_INT64 here. */ - /* */ - /* For most compilers, this will only create compilation warnings when */ - /* building the library. */ - /* */ - /* ObNote: The compiler-specific 64-bit integers are detected in the */ - /* file `ftconfig.h' either statically or through the */ - /* `configure' script on supported platforms. */ - /* */ + /************************************************************************** + * + * Many compilers provide a non-ANSI 64-bit data type that can be used by + * FreeType to speed up some computations. However, this will create some + * problems when compiling the library in strict ANSI mode. + * + * For this reason, the use of 64-bit integers is normally disabled when + * the `__STDC__` macro is defined. You can however disable this by + * defining the macro `FT_CONFIG_OPTION_FORCE_INT64` here. + * + * For most compilers, this will only create compilation warnings when + * building the library. + * + * ObNote: The compiler-specific 64-bit integers are detected in the + * file `ftconfig.h` either statically or through the `configure` + * script on supported platforms. + */ #undef FT_CONFIG_OPTION_FORCE_INT64 - /*************************************************************************/ - /* */ - /* If this macro is defined, do not try to use an assembler version of */ - /* performance-critical functions (e.g. FT_MulFix). You should only do */ - /* that to verify that the assembler function works properly, or to */ - /* execute benchmark tests of the various implementations. */ + /************************************************************************** + * + * If this macro is defined, do not try to use an assembler version of + * performance-critical functions (e.g., @FT_MulFix). You should only do + * that to verify that the assembler function works properly, or to execute + * benchmark tests of the various implementations. + */ /* #define FT_CONFIG_OPTION_NO_ASSEMBLER */ - /*************************************************************************/ - /* */ - /* If this macro is defined, try to use an inlined assembler version of */ - /* the `FT_MulFix' function, which is a `hotspot' when loading and */ - /* hinting glyphs, and which should be executed as fast as possible. */ - /* */ - /* Note that if your compiler or CPU is not supported, this will default */ - /* to the standard and portable implementation found in `ftcalc.c'. */ - /* */ + /************************************************************************** + * + * If this macro is defined, try to use an inlined assembler version of the + * @FT_MulFix function, which is a 'hotspot' when loading and hinting + * glyphs, and which should be executed as fast as possible. + * + * Note that if your compiler or CPU is not supported, this will default to + * the standard and portable implementation found in `ftcalc.c`. + */ #define FT_CONFIG_OPTION_INLINE_MULFIX - /*************************************************************************/ - /* */ - /* LZW-compressed file support. */ - /* */ - /* FreeType now handles font files that have been compressed with the */ - /* `compress' program. This is mostly used to parse many of the PCF */ - /* files that come with various X11 distributions. The implementation */ - /* uses NetBSD's `zopen' to partially uncompress the file on the fly */ - /* (see src/lzw/ftgzip.c). */ - /* */ - /* Define this macro if you want to enable this `feature'. */ - /* */ + /************************************************************************** + * + * LZW-compressed file support. + * + * FreeType now handles font files that have been compressed with the + * `compress` program. This is mostly used to parse many of the PCF + * files that come with various X11 distributions. The implementation + * uses NetBSD's `zopen` to partially uncompress the file on the fly (see + * `src/lzw/ftgzip.c`). + * + * Define this macro if you want to enable this 'feature'. + */ #define FT_CONFIG_OPTION_USE_LZW - /*************************************************************************/ - /* */ - /* Gzip-compressed file support. */ - /* */ - /* FreeType now handles font files that have been compressed with the */ - /* `gzip' program. This is mostly used to parse many of the PCF files */ - /* that come with XFree86. The implementation uses `zlib' to */ - /* partially uncompress the file on the fly (see src/gzip/ftgzip.c). */ - /* */ - /* Define this macro if you want to enable this `feature'. See also */ - /* the macro FT_CONFIG_OPTION_SYSTEM_ZLIB below. */ - /* */ + /************************************************************************** + * + * Gzip-compressed file support. + * + * FreeType now handles font files that have been compressed with the + * `gzip` program. This is mostly used to parse many of the PCF files + * that come with XFree86. The implementation uses 'zlib' to partially + * uncompress the file on the fly (see `src/gzip/ftgzip.c`). + * + * Define this macro if you want to enable this 'feature'. See also the + * macro `FT_CONFIG_OPTION_SYSTEM_ZLIB` below. + */ #define FT_CONFIG_OPTION_USE_ZLIB - /*************************************************************************/ - /* */ - /* ZLib library selection */ - /* */ - /* This macro is only used when FT_CONFIG_OPTION_USE_ZLIB is defined. */ - /* It allows FreeType's `ftgzip' component to link to the system's */ - /* installation of the ZLib library. This is useful on systems like */ - /* Unix or VMS where it generally is already available. */ - /* */ - /* If you let it undefined, the component will use its own copy */ - /* of the zlib sources instead. These have been modified to be */ - /* included directly within the component and *not* export external */ - /* function names. This allows you to link any program with FreeType */ - /* _and_ ZLib without linking conflicts. */ - /* */ - /* Do not #undef this macro here since the build system might define */ - /* it for certain configurations only. */ - /* */ - /* If you use a build system like cmake or the `configure' script, */ - /* options set by those programs have precendence, overwriting the */ - /* value here with the configured one. */ - /* */ + /************************************************************************** + * + * ZLib library selection + * + * This macro is only used when `FT_CONFIG_OPTION_USE_ZLIB` is defined. + * It allows FreeType's 'ftgzip' component to link to the system's + * installation of the ZLib library. This is useful on systems like + * Unix or VMS where it generally is already available. + * + * If you let it undefined, the component will use its own copy of the + * zlib sources instead. These have been modified to be included + * directly within the component and **not** export external function + * names. This allows you to link any program with FreeType _and_ ZLib + * without linking conflicts. + * + * Do not `#undef` this macro here since the build system might define + * it for certain configurations only. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + */ /* #define FT_CONFIG_OPTION_SYSTEM_ZLIB */ - /*************************************************************************/ - /* */ - /* Bzip2-compressed file support. */ - /* */ - /* FreeType now handles font files that have been compressed with the */ - /* `bzip2' program. This is mostly used to parse many of the PCF */ - /* files that come with XFree86. The implementation uses `libbz2' to */ - /* partially uncompress the file on the fly (see src/bzip2/ftbzip2.c). */ - /* Contrary to gzip, bzip2 currently is not included and need to use */ - /* the system available bzip2 implementation. */ - /* */ - /* Define this macro if you want to enable this `feature'. */ - /* */ - /* If you use a build system like cmake or the `configure' script, */ - /* options set by those programs have precendence, overwriting the */ - /* value here with the configured one. */ - /* */ + /************************************************************************** + * + * Bzip2-compressed file support. + * + * FreeType now handles font files that have been compressed with the + * `bzip2` program. This is mostly used to parse many of the PCF files + * that come with XFree86. The implementation uses `libbz2` to partially + * uncompress the file on the fly (see `src/bzip2/ftbzip2.c`). Contrary + * to gzip, bzip2 currently is not included and need to use the system + * available bzip2 implementation. + * + * Define this macro if you want to enable this 'feature'. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + */ /* #define FT_CONFIG_OPTION_USE_BZIP2 */ - /*************************************************************************/ - /* */ - /* Define to disable the use of file stream functions and types, FILE, */ - /* fopen() etc. Enables the use of smaller system libraries on embedded */ - /* systems that have multiple system libraries, some with or without */ - /* file stream support, in the cases where file stream support is not */ - /* necessary such as memory loading of font files. */ - /* */ + /************************************************************************** + * + * Define to disable the use of file stream functions and types, `FILE`, + * `fopen`, etc. Enables the use of smaller system libraries on embedded + * systems that have multiple system libraries, some with or without file + * stream support, in the cases where file stream support is not necessary + * such as memory loading of font files. + */ /* #define FT_CONFIG_OPTION_DISABLE_STREAM_SUPPORT */ - /*************************************************************************/ - /* */ - /* PNG bitmap support. */ - /* */ - /* FreeType now handles loading color bitmap glyphs in the PNG format. */ - /* This requires help from the external libpng library. Uncompressed */ - /* color bitmaps do not need any external libraries and will be */ - /* supported regardless of this configuration. */ - /* */ - /* Define this macro if you want to enable this `feature'. */ - /* */ - /* If you use a build system like cmake or the `configure' script, */ - /* options set by those programs have precendence, overwriting the */ - /* value here with the configured one. */ - /* */ + /************************************************************************** + * + * PNG bitmap support. + * + * FreeType now handles loading color bitmap glyphs in the PNG format. + * This requires help from the external libpng library. Uncompressed + * color bitmaps do not need any external libraries and will be supported + * regardless of this configuration. + * + * Define this macro if you want to enable this 'feature'. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + */ /* #define FT_CONFIG_OPTION_USE_PNG */ - /*************************************************************************/ - /* */ - /* HarfBuzz support. */ - /* */ - /* FreeType uses the HarfBuzz library to improve auto-hinting of */ - /* OpenType fonts. If available, many glyphs not directly addressable */ - /* by a font's character map will be hinted also. */ - /* */ - /* Define this macro if you want to enable this `feature'. */ - /* */ - /* If you use a build system like cmake or the `configure' script, */ - /* options set by those programs have precendence, overwriting the */ - /* value here with the configured one. */ - /* */ + /************************************************************************** + * + * HarfBuzz support. + * + * FreeType uses the HarfBuzz library to improve auto-hinting of OpenType + * fonts. If available, many glyphs not directly addressable by a font's + * character map will be hinted also. + * + * Define this macro if you want to enable this 'feature'. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + */ /* #define FT_CONFIG_OPTION_USE_HARFBUZZ */ - /*************************************************************************/ - /* */ - /* Glyph Postscript Names handling */ - /* */ - /* By default, FreeType 2 is compiled with the `psnames' module. This */ - /* module is in charge of converting a glyph name string into a */ - /* Unicode value, or return a Macintosh standard glyph name for the */ - /* use with the TrueType `post' table. */ - /* */ - /* Undefine this macro if you do not want `psnames' compiled in your */ - /* build of FreeType. This has the following effects: */ - /* */ - /* - The TrueType driver will provide its own set of glyph names, */ - /* if you build it to support postscript names in the TrueType */ - /* `post' table, but will not synthesize a missing Unicode charmap. */ - /* */ - /* - The Type 1 driver will not be able to synthesize a Unicode */ - /* charmap out of the glyphs found in the fonts. */ - /* */ - /* You would normally undefine this configuration macro when building */ - /* a version of FreeType that doesn't contain a Type 1 or CFF driver. */ - /* */ + /************************************************************************** + * + * Glyph Postscript Names handling + * + * By default, FreeType 2 is compiled with the 'psnames' module. This + * module is in charge of converting a glyph name string into a Unicode + * value, or return a Macintosh standard glyph name for the use with the + * TrueType 'post' table. + * + * Undefine this macro if you do not want 'psnames' compiled in your + * build of FreeType. This has the following effects: + * + * - The TrueType driver will provide its own set of glyph names, if you + * build it to support postscript names in the TrueType 'post' table, + * but will not synthesize a missing Unicode charmap. + * + * - The Type~1 driver will not be able to synthesize a Unicode charmap + * out of the glyphs found in the fonts. + * + * You would normally undefine this configuration macro when building a + * version of FreeType that doesn't contain a Type~1 or CFF driver. + */ #define FT_CONFIG_OPTION_POSTSCRIPT_NAMES - /*************************************************************************/ - /* */ - /* Postscript Names to Unicode Values support */ - /* */ - /* By default, FreeType 2 is built with the `PSNames' module compiled */ - /* in. Among other things, the module is used to convert a glyph name */ - /* into a Unicode value. This is especially useful in order to */ - /* synthesize on the fly a Unicode charmap from the CFF/Type 1 driver */ - /* through a big table named the `Adobe Glyph List' (AGL). */ - /* */ - /* Undefine this macro if you do not want the Adobe Glyph List */ - /* compiled in your `PSNames' module. The Type 1 driver will not be */ - /* able to synthesize a Unicode charmap out of the glyphs found in the */ - /* fonts. */ - /* */ + /************************************************************************** + * + * Postscript Names to Unicode Values support + * + * By default, FreeType~2 is built with the 'psnames' module compiled in. + * Among other things, the module is used to convert a glyph name into a + * Unicode value. This is especially useful in order to synthesize on + * the fly a Unicode charmap from the CFF/Type~1 driver through a big + * table named the 'Adobe Glyph List' (AGL). + * + * Undefine this macro if you do not want the Adobe Glyph List compiled + * in your 'psnames' module. The Type~1 driver will not be able to + * synthesize a Unicode charmap out of the glyphs found in the fonts. + */ #define FT_CONFIG_OPTION_ADOBE_GLYPH_LIST - /*************************************************************************/ - /* */ - /* Support for Mac fonts */ - /* */ - /* Define this macro if you want support for outline fonts in Mac */ - /* format (mac dfont, mac resource, macbinary containing a mac */ - /* resource) on non-Mac platforms. */ - /* */ - /* Note that the `FOND' resource isn't checked. */ - /* */ + /************************************************************************** + * + * Support for Mac fonts + * + * Define this macro if you want support for outline fonts in Mac format + * (mac dfont, mac resource, macbinary containing a mac resource) on + * non-Mac platforms. + * + * Note that the 'FOND' resource isn't checked. + */ #define FT_CONFIG_OPTION_MAC_FONTS - /*************************************************************************/ - /* */ - /* Guessing methods to access embedded resource forks */ - /* */ - /* Enable extra Mac fonts support on non-Mac platforms (e.g. */ - /* GNU/Linux). */ - /* */ - /* Resource forks which include fonts data are stored sometimes in */ - /* locations which users or developers don't expected. In some cases, */ - /* resource forks start with some offset from the head of a file. In */ - /* other cases, the actual resource fork is stored in file different */ - /* from what the user specifies. If this option is activated, */ - /* FreeType tries to guess whether such offsets or different file */ - /* names must be used. */ - /* */ - /* Note that normal, direct access of resource forks is controlled via */ - /* the FT_CONFIG_OPTION_MAC_FONTS option. */ - /* */ + /************************************************************************** + * + * Guessing methods to access embedded resource forks + * + * Enable extra Mac fonts support on non-Mac platforms (e.g., GNU/Linux). + * + * Resource forks which include fonts data are stored sometimes in + * locations which users or developers don't expected. In some cases, + * resource forks start with some offset from the head of a file. In + * other cases, the actual resource fork is stored in file different from + * what the user specifies. If this option is activated, FreeType tries + * to guess whether such offsets or different file names must be used. + * + * Note that normal, direct access of resource forks is controlled via + * the `FT_CONFIG_OPTION_MAC_FONTS` option. + */ #ifdef FT_CONFIG_OPTION_MAC_FONTS #define FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK #endif - /*************************************************************************/ - /* */ - /* Allow the use of FT_Incremental_Interface to load typefaces that */ - /* contain no glyph data, but supply it via a callback function. */ - /* This is required by clients supporting document formats which */ - /* supply font data incrementally as the document is parsed, such */ - /* as the Ghostscript interpreter for the PostScript language. */ - /* */ + /************************************************************************** + * + * Allow the use of `FT_Incremental_Interface` to load typefaces that + * contain no glyph data, but supply it via a callback function. This is + * required by clients supporting document formats which supply font data + * incrementally as the document is parsed, such as the Ghostscript + * interpreter for the PostScript language. + */ #define FT_CONFIG_OPTION_INCREMENTAL - /*************************************************************************/ - /* */ - /* The size in bytes of the render pool used by the scan-line converter */ - /* to do all of its work. */ - /* */ + /************************************************************************** + * + * The size in bytes of the render pool used by the scan-line converter to + * do all of its work. + */ #define FT_RENDER_POOL_SIZE 16384L - /*************************************************************************/ - /* */ - /* FT_MAX_MODULES */ - /* */ - /* The maximum number of modules that can be registered in a single */ - /* FreeType library object. 32 is the default. */ - /* */ + /************************************************************************** + * + * FT_MAX_MODULES + * + * The maximum number of modules that can be registered in a single + * FreeType library object. 32~is the default. + */ #define FT_MAX_MODULES 32 - /*************************************************************************/ - /* */ - /* Debug level */ - /* */ - /* FreeType can be compiled in debug or trace mode. In debug mode, */ - /* errors are reported through the `ftdebug' component. In trace */ - /* mode, additional messages are sent to the standard output during */ - /* execution. */ - /* */ - /* Define FT_DEBUG_LEVEL_ERROR to build the library in debug mode. */ - /* Define FT_DEBUG_LEVEL_TRACE to build it in trace mode. */ - /* */ - /* Don't define any of these macros to compile in `release' mode! */ - /* */ - /* Do not #undef these macros here since the build system might define */ - /* them for certain configurations only. */ - /* */ + /************************************************************************** + * + * Debug level + * + * FreeType can be compiled in debug or trace mode. In debug mode, + * errors are reported through the 'ftdebug' component. In trace mode, + * additional messages are sent to the standard output during execution. + * + * Define `FT_DEBUG_LEVEL_ERROR` to build the library in debug mode. + * Define `FT_DEBUG_LEVEL_TRACE` to build it in trace mode. + * + * Don't define any of these macros to compile in 'release' mode! + * + * Do not `#undef` these macros here since the build system might define + * them for certain configurations only. + */ /* #define FT_DEBUG_LEVEL_ERROR */ /* #define FT_DEBUG_LEVEL_TRACE */ - /*************************************************************************/ - /* */ - /* Autofitter debugging */ - /* */ - /* If FT_DEBUG_AUTOFIT is defined, FreeType provides some means to */ - /* control the autofitter behaviour for debugging purposes with global */ - /* boolean variables (consequently, you should *never* enable this */ - /* while compiling in `release' mode): */ - /* */ - /* _af_debug_disable_horz_hints */ - /* _af_debug_disable_vert_hints */ - /* _af_debug_disable_blue_hints */ - /* */ - /* Additionally, the following functions provide dumps of various */ - /* internal autofit structures to stdout (using `printf'): */ - /* */ - /* af_glyph_hints_dump_points */ - /* af_glyph_hints_dump_segments */ - /* af_glyph_hints_dump_edges */ - /* af_glyph_hints_get_num_segments */ - /* af_glyph_hints_get_segment_offset */ - /* */ - /* As an argument, they use another global variable: */ - /* */ - /* _af_debug_hints */ - /* */ - /* Please have a look at the `ftgrid' demo program to see how those */ - /* variables and macros should be used. */ - /* */ - /* Do not #undef these macros here since the build system might define */ - /* them for certain configurations only. */ - /* */ + /************************************************************************** + * + * Autofitter debugging + * + * If `FT_DEBUG_AUTOFIT` is defined, FreeType provides some means to + * control the autofitter behaviour for debugging purposes with global + * boolean variables (consequently, you should **never** enable this + * while compiling in 'release' mode): + * + * ``` + * _af_debug_disable_horz_hints + * _af_debug_disable_vert_hints + * _af_debug_disable_blue_hints + * ``` + * + * Additionally, the following functions provide dumps of various + * internal autofit structures to stdout (using `printf`): + * + * ``` + * af_glyph_hints_dump_points + * af_glyph_hints_dump_segments + * af_glyph_hints_dump_edges + * af_glyph_hints_get_num_segments + * af_glyph_hints_get_segment_offset + * ``` + * + * As an argument, they use another global variable: + * + * ``` + * _af_debug_hints + * ``` + * + * Please have a look at the `ftgrid` demo program to see how those + * variables and macros should be used. + * + * Do not `#undef` these macros here since the build system might define + * them for certain configurations only. + */ /* #define FT_DEBUG_AUTOFIT */ - /*************************************************************************/ - /* */ - /* Memory Debugging */ - /* */ - /* FreeType now comes with an integrated memory debugger that is */ - /* capable of detecting simple errors like memory leaks or double */ - /* deletes. To compile it within your build of the library, you */ - /* should define FT_DEBUG_MEMORY here. */ - /* */ - /* Note that the memory debugger is only activated at runtime when */ - /* when the _environment_ variable `FT2_DEBUG_MEMORY' is defined also! */ - /* */ - /* Do not #undef this macro here since the build system might define */ - /* it for certain configurations only. */ - /* */ + /************************************************************************** + * + * Memory Debugging + * + * FreeType now comes with an integrated memory debugger that is capable + * of detecting simple errors like memory leaks or double deletes. To + * compile it within your build of the library, you should define + * `FT_DEBUG_MEMORY` here. + * + * Note that the memory debugger is only activated at runtime when when + * the _environment_ variable `FT2_DEBUG_MEMORY` is defined also! + * + * Do not `#undef` this macro here since the build system might define it + * for certain configurations only. + */ /* #define FT_DEBUG_MEMORY */ - /*************************************************************************/ - /* */ - /* Module errors */ - /* */ - /* If this macro is set (which is _not_ the default), the higher byte */ - /* of an error code gives the module in which the error has occurred, */ - /* while the lower byte is the real error code. */ - /* */ - /* Setting this macro makes sense for debugging purposes only, since */ - /* it would break source compatibility of certain programs that use */ - /* FreeType 2. */ - /* */ - /* More details can be found in the files ftmoderr.h and fterrors.h. */ - /* */ + /************************************************************************** + * + * Module errors + * + * If this macro is set (which is _not_ the default), the higher byte of + * an error code gives the module in which the error has occurred, while + * the lower byte is the real error code. + * + * Setting this macro makes sense for debugging purposes only, since it + * would break source compatibility of certain programs that use + * FreeType~2. + * + * More details can be found in the files `ftmoderr.h` and `fterrors.h`. + */ #undef FT_CONFIG_OPTION_USE_MODULE_ERRORS - /*************************************************************************/ - /* */ - /* Position Independent Code */ - /* */ - /* If this macro is set (which is _not_ the default), FreeType2 will */ - /* avoid creating constants that require address fixups. Instead the */ - /* constants will be moved into a struct and additional intialization */ - /* code will be used. */ - /* */ - /* Setting this macro is needed for systems that prohibit address */ - /* fixups, such as BREW. [Note that standard compilers like gcc or */ - /* clang handle PIC generation automatically; you don't have to set */ - /* FT_CONFIG_OPTION_PIC, which is only necessary for very special */ - /* compilers.] */ - /* */ - /* Note that FT_CONFIG_OPTION_PIC support is not available for all */ - /* modules (see `modules.cfg' for a complete list). For building with */ - /* FT_CONFIG_OPTION_PIC support, do the following. */ - /* */ - /* 0. Clone the repository. */ - /* 1. Define FT_CONFIG_OPTION_PIC. */ - /* 2. Remove all subdirectories in `src' that don't have */ - /* FT_CONFIG_OPTION_PIC support. */ - /* 3. Comment out the corresponding modules in `modules.cfg'. */ - /* 4. Compile. */ - /* */ -/* #define FT_CONFIG_OPTION_PIC */ + /************************************************************************** + * + * Error Strings + * + * If this macro is set, `FT_Error_String` will return meaningful + * descriptions. This is not enabled by default to reduce the overall + * size of FreeType. + * + * More details can be found in the file `fterrors.h`. + */ +/* #define FT_CONFIG_OPTION_ERROR_STRINGS */ /*************************************************************************/ @@ -524,50 +515,60 @@ FT_BEGIN_HEADER /*************************************************************************/ - /*************************************************************************/ - /* */ - /* Define TT_CONFIG_OPTION_EMBEDDED_BITMAPS if you want to support */ - /* embedded bitmaps in all formats using the SFNT module (namely */ - /* TrueType & OpenType). */ - /* */ + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_EMBEDDED_BITMAPS` if you want to support + * embedded bitmaps in all formats using the 'sfnt' module (namely + * TrueType~& OpenType). + */ #define TT_CONFIG_OPTION_EMBEDDED_BITMAPS - /*************************************************************************/ - /* */ - /* Define TT_CONFIG_OPTION_POSTSCRIPT_NAMES if you want to be able to */ - /* load and enumerate the glyph Postscript names in a TrueType or */ - /* OpenType file. */ - /* */ - /* Note that when you do not compile the `PSNames' module by undefining */ - /* the above FT_CONFIG_OPTION_POSTSCRIPT_NAMES, the `sfnt' module will */ - /* contain additional code used to read the PS Names table from a font. */ - /* */ - /* (By default, the module uses `PSNames' to extract glyph names.) */ - /* */ + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_COLOR_LAYERS` if you want to support coloured + * outlines (from the 'COLR'/'CPAL' tables) in all formats using the 'sfnt' + * module (namely TrueType~& OpenType). + */ +#define TT_CONFIG_OPTION_COLOR_LAYERS + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_POSTSCRIPT_NAMES` if you want to be able to + * load and enumerate the glyph Postscript names in a TrueType or OpenType + * file. + * + * Note that when you do not compile the 'psnames' module by undefining the + * above `FT_CONFIG_OPTION_POSTSCRIPT_NAMES`, the 'sfnt' module will + * contain additional code used to read the PS Names table from a font. + * + * (By default, the module uses 'psnames' to extract glyph names.) + */ #define TT_CONFIG_OPTION_POSTSCRIPT_NAMES - /*************************************************************************/ - /* */ - /* Define TT_CONFIG_OPTION_SFNT_NAMES if your applications need to */ - /* access the internal name table in a SFNT-based format like TrueType */ - /* or OpenType. The name table contains various strings used to */ - /* describe the font, like family name, copyright, version, etc. It */ - /* does not contain any glyph name though. */ - /* */ - /* Accessing SFNT names is done through the functions declared in */ - /* `ftsnames.h'. */ - /* */ + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_SFNT_NAMES` if your applications need to access + * the internal name table in a SFNT-based format like TrueType or + * OpenType. The name table contains various strings used to describe the + * font, like family name, copyright, version, etc. It does not contain + * any glyph name though. + * + * Accessing SFNT names is done through the functions declared in + * `ftsnames.h`. + */ #define TT_CONFIG_OPTION_SFNT_NAMES - /*************************************************************************/ - /* */ - /* TrueType CMap support */ - /* */ - /* Here you can fine-tune which TrueType CMap table format shall be */ - /* supported. */ + /************************************************************************** + * + * TrueType CMap support + * + * Here you can fine-tune which TrueType CMap table format shall be + * supported. + */ #define TT_CONFIG_CMAP_FORMAT_0 #define TT_CONFIG_CMAP_FORMAT_2 #define TT_CONFIG_CMAP_FORMAT_4 @@ -587,131 +588,130 @@ FT_BEGIN_HEADER /*************************************************************************/ /*************************************************************************/ - /*************************************************************************/ - /* */ - /* Define TT_CONFIG_OPTION_BYTECODE_INTERPRETER if you want to compile */ - /* a bytecode interpreter in the TrueType driver. */ - /* */ - /* By undefining this, you will only compile the code necessary to load */ - /* TrueType glyphs without hinting. */ - /* */ - /* Do not #undef this macro here, since the build system might */ - /* define it for certain configurations only. */ - /* */ + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_BYTECODE_INTERPRETER` if you want to compile a + * bytecode interpreter in the TrueType driver. + * + * By undefining this, you will only compile the code necessary to load + * TrueType glyphs without hinting. + * + * Do not `#undef` this macro here, since the build system might define it + * for certain configurations only. + */ #define TT_CONFIG_OPTION_BYTECODE_INTERPRETER - /*************************************************************************/ - /* */ - /* Define TT_CONFIG_OPTION_SUBPIXEL_HINTING if you want to compile */ - /* subpixel hinting support into the TrueType driver. This modifies the */ - /* TrueType hinting mechanism when anything but FT_RENDER_MODE_MONO is */ - /* requested. */ - /* */ - /* In particular, it modifies the bytecode interpreter to interpret (or */ - /* not) instructions in a certain way so that all TrueType fonts look */ - /* like they do in a Windows ClearType (DirectWrite) environment. See */ - /* [1] for a technical overview on what this means. See `ttinterp.h' */ - /* for more details on the LEAN option. */ - /* */ - /* There are three possible values. */ - /* */ - /* Value 1: */ - /* This value is associated with the `Infinality' moniker, */ - /* contributed by an individual nicknamed Infinality with the goal of */ - /* making TrueType fonts render better than on Windows. A high */ - /* amount of configurability and flexibility, down to rules for */ - /* single glyphs in fonts, but also very slow. Its experimental and */ - /* slow nature and the original developer losing interest meant that */ - /* this option was never enabled in default builds. */ - /* */ - /* The corresponding interpreter version is v38. */ - /* */ - /* Value 2: */ - /* The new default mode for the TrueType driver. The Infinality code */ - /* base was stripped to the bare minimum and all configurability */ - /* removed in the name of speed and simplicity. The configurability */ - /* was mainly aimed at legacy fonts like Arial, Times New Roman, or */ - /* Courier. Legacy fonts are fonts that modify vertical stems to */ - /* achieve clean black-and-white bitmaps. The new mode focuses on */ - /* applying a minimal set of rules to all fonts indiscriminately so */ - /* that modern and web fonts render well while legacy fonts render */ - /* okay. */ - /* */ - /* The corresponding interpreter version is v40. */ - /* */ - /* Value 3: */ - /* Compile both, making both v38 and v40 available (the latter is the */ - /* default). */ - /* */ - /* By undefining these, you get rendering behavior like on Windows */ - /* without ClearType, i.e., Windows XP without ClearType enabled and */ - /* Win9x (interpreter version v35). Or not, depending on how much */ - /* hinting blood and testing tears the font designer put into a given */ - /* font. If you define one or both subpixel hinting options, you can */ - /* switch between between v35 and the ones you define (using */ - /* `FT_Property_Set'). */ - /* */ - /* This option requires TT_CONFIG_OPTION_BYTECODE_INTERPRETER to be */ - /* defined. */ - /* */ - /* [1] https://www.microsoft.com/typography/cleartype/truetypecleartype.aspx */ - /* */ + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_SUBPIXEL_HINTING` if you want to compile + * subpixel hinting support into the TrueType driver. This modifies the + * TrueType hinting mechanism when anything but `FT_RENDER_MODE_MONO` is + * requested. + * + * In particular, it modifies the bytecode interpreter to interpret (or + * not) instructions in a certain way so that all TrueType fonts look like + * they do in a Windows ClearType (DirectWrite) environment. See [1] for a + * technical overview on what this means. See `ttinterp.h` for more + * details on the LEAN option. + * + * There are three possible values. + * + * Value 1: + * This value is associated with the 'Infinality' moniker, contributed by + * an individual nicknamed Infinality with the goal of making TrueType + * fonts render better than on Windows. A high amount of configurability + * and flexibility, down to rules for single glyphs in fonts, but also + * very slow. Its experimental and slow nature and the original + * developer losing interest meant that this option was never enabled in + * default builds. + * + * The corresponding interpreter version is v38. + * + * Value 2: + * The new default mode for the TrueType driver. The Infinality code + * base was stripped to the bare minimum and all configurability removed + * in the name of speed and simplicity. The configurability was mainly + * aimed at legacy fonts like 'Arial', 'Times New Roman', or 'Courier'. + * Legacy fonts are fonts that modify vertical stems to achieve clean + * black-and-white bitmaps. The new mode focuses on applying a minimal + * set of rules to all fonts indiscriminately so that modern and web + * fonts render well while legacy fonts render okay. + * + * The corresponding interpreter version is v40. + * + * Value 3: + * Compile both, making both v38 and v40 available (the latter is the + * default). + * + * By undefining these, you get rendering behavior like on Windows without + * ClearType, i.e., Windows XP without ClearType enabled and Win9x + * (interpreter version v35). Or not, depending on how much hinting blood + * and testing tears the font designer put into a given font. If you + * define one or both subpixel hinting options, you can switch between + * between v35 and the ones you define (using `FT_Property_Set`). + * + * This option requires `TT_CONFIG_OPTION_BYTECODE_INTERPRETER` to be + * defined. + * + * [1] + * https://www.microsoft.com/typography/cleartype/truetypecleartype.aspx + */ /* #define TT_CONFIG_OPTION_SUBPIXEL_HINTING 1 */ #define TT_CONFIG_OPTION_SUBPIXEL_HINTING 2 /* #define TT_CONFIG_OPTION_SUBPIXEL_HINTING ( 1 | 2 ) */ - /*************************************************************************/ - /* */ - /* Define TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED to compile the */ - /* TrueType glyph loader to use Apple's definition of how to handle */ - /* component offsets in composite glyphs. */ - /* */ - /* Apple and MS disagree on the default behavior of component offsets */ - /* in composites. Apple says that they should be scaled by the scaling */ - /* factors in the transformation matrix (roughly, it's more complex) */ - /* while MS says they should not. OpenType defines two bits in the */ - /* composite flags array which can be used to disambiguate, but old */ - /* fonts will not have them. */ - /* */ - /* https://www.microsoft.com/typography/otspec/glyf.htm */ - /* https://developer.apple.com/fonts/TrueType-Reference-Manual/RM06/Chap6glyf.html */ - /* */ + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED` to compile the + * TrueType glyph loader to use Apple's definition of how to handle + * component offsets in composite glyphs. + * + * Apple and MS disagree on the default behavior of component offsets in + * composites. Apple says that they should be scaled by the scaling + * factors in the transformation matrix (roughly, it's more complex) while + * MS says they should not. OpenType defines two bits in the composite + * flags array which can be used to disambiguate, but old fonts will not + * have them. + * + * https://www.microsoft.com/typography/otspec/glyf.htm + * https://developer.apple.com/fonts/TrueType-Reference-Manual/RM06/Chap6glyf.html + */ #undef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED - /*************************************************************************/ - /* */ - /* Define TT_CONFIG_OPTION_GX_VAR_SUPPORT if you want to include */ - /* support for Apple's distortable font technology (fvar, gvar, cvar, */ - /* and avar tables). This has many similarities to Type 1 Multiple */ - /* Masters support. */ - /* */ + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_GX_VAR_SUPPORT` if you want to include support + * for Apple's distortable font technology ('fvar', 'gvar', 'cvar', and + * 'avar' tables). Tagged 'Font Variations', this is now part of OpenType + * also. This has many similarities to Type~1 Multiple Masters support. + */ #define TT_CONFIG_OPTION_GX_VAR_SUPPORT - /*************************************************************************/ - /* */ - /* Define TT_CONFIG_OPTION_BDF if you want to include support for */ - /* an embedded `BDF ' table within SFNT-based bitmap formats. */ - /* */ + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_BDF` if you want to include support for an + * embedded 'BDF~' table within SFNT-based bitmap formats. + */ #define TT_CONFIG_OPTION_BDF - /*************************************************************************/ - /* */ - /* Option TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES controls the maximum */ - /* number of bytecode instructions executed for a single run of the */ - /* bytecode interpreter, needed to prevent infinite loops. You don't */ - /* want to change this except for very special situations (e.g., making */ - /* a library fuzzer spend less time to handle broken fonts). */ - /* */ - /* It is not expected that this value is ever modified by a configuring */ - /* script; instead, it gets surrounded with #ifndef ... #endif so that */ - /* the value can be set as a preprocessor option on the compiler's */ - /* command line. */ - /* */ + /************************************************************************** + * + * Option `TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES` controls the maximum + * number of bytecode instructions executed for a single run of the + * bytecode interpreter, needed to prevent infinite loops. You don't want + * to change this except for very special situations (e.g., making a + * library fuzzer spend less time to handle broken fonts). + * + * It is not expected that this value is ever modified by a configuring + * script; instead, it gets surrounded with `#ifndef ... #endif` so that + * the value can be set as a preprocessor option on the compiler's command + * line. + */ #ifndef TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES #define TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES 1000000L #endif @@ -726,59 +726,58 @@ FT_BEGIN_HEADER /*************************************************************************/ - /*************************************************************************/ - /* */ - /* T1_MAX_DICT_DEPTH is the maximum depth of nest dictionaries and */ - /* arrays in the Type 1 stream (see t1load.c). A minimum of 4 is */ - /* required. */ - /* */ + /************************************************************************** + * + * `T1_MAX_DICT_DEPTH` is the maximum depth of nest dictionaries and arrays + * in the Type~1 stream (see `t1load.c`). A minimum of~4 is required. + */ #define T1_MAX_DICT_DEPTH 5 - /*************************************************************************/ - /* */ - /* T1_MAX_SUBRS_CALLS details the maximum number of nested sub-routine */ - /* calls during glyph loading. */ - /* */ + /************************************************************************** + * + * `T1_MAX_SUBRS_CALLS` details the maximum number of nested sub-routine + * calls during glyph loading. + */ #define T1_MAX_SUBRS_CALLS 16 - /*************************************************************************/ - /* */ - /* T1_MAX_CHARSTRING_OPERANDS is the charstring stack's capacity. A */ - /* minimum of 16 is required. */ - /* */ - /* The Chinese font MingTiEG-Medium (CNS 11643 character set) needs 256. */ - /* */ + /************************************************************************** + * + * `T1_MAX_CHARSTRING_OPERANDS` is the charstring stack's capacity. A + * minimum of~16 is required. + * + * The Chinese font 'MingTiEG-Medium' (covering the CNS 11643 character + * set) needs 256. + */ #define T1_MAX_CHARSTRINGS_OPERANDS 256 - /*************************************************************************/ - /* */ - /* Define this configuration macro if you want to prevent the */ - /* compilation of `t1afm', which is in charge of reading Type 1 AFM */ - /* files into an existing face. Note that if set, the T1 driver will be */ - /* unable to produce kerning distances. */ - /* */ + /************************************************************************** + * + * Define this configuration macro if you want to prevent the compilation + * of the 't1afm' module, which is in charge of reading Type~1 AFM files + * into an existing face. Note that if set, the Type~1 driver will be + * unable to produce kerning distances. + */ #undef T1_CONFIG_OPTION_NO_AFM - /*************************************************************************/ - /* */ - /* Define this configuration macro if you want to prevent the */ - /* compilation of the Multiple Masters font support in the Type 1 */ - /* driver. */ - /* */ + /************************************************************************** + * + * Define this configuration macro if you want to prevent the compilation + * of the Multiple Masters font support in the Type~1 driver. + */ #undef T1_CONFIG_OPTION_NO_MM_SUPPORT - /*************************************************************************/ - /* */ - /* T1_CONFIG_OPTION_OLD_ENGINE controls whether the pre-Adobe Type 1 */ - /* engine gets compiled into FreeType. If defined, it is possible to */ - /* switch between the two engines using the `hinting-engine' property of */ - /* the type1 driver module. */ - /* */ + /************************************************************************** + * + * `T1_CONFIG_OPTION_OLD_ENGINE` controls whether the pre-Adobe Type~1 + * engine gets compiled into FreeType. If defined, it is possible to + * switch between the two engines using the `hinting-engine` property of + * the 'type1' driver module. + */ /* #define T1_CONFIG_OPTION_OLD_ENGINE */ @@ -791,17 +790,16 @@ FT_BEGIN_HEADER /*************************************************************************/ - /*************************************************************************/ - /* */ - /* Using CFF_CONFIG_OPTION_DARKENING_PARAMETER_{X,Y}{1,2,3,4} it is */ - /* possible to set up the default values of the four control points that */ - /* define the stem darkening behaviour of the (new) CFF engine. For */ - /* more details please read the documentation of the */ - /* `darkening-parameters' property (file `ftdriver.h'), which allows the */ - /* control at run-time. */ - /* */ - /* Do *not* undefine these macros! */ - /* */ + /************************************************************************** + * + * Using `CFF_CONFIG_OPTION_DARKENING_PARAMETER_{X,Y}{1,2,3,4}` it is + * possible to set up the default values of the four control points that + * define the stem darkening behaviour of the (new) CFF engine. For more + * details please read the documentation of the `darkening-parameters` + * property (file `ftdriver.h`), which allows the control at run-time. + * + * Do **not** undefine these macros! + */ #define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 500 #define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 400 @@ -815,13 +813,13 @@ FT_BEGIN_HEADER #define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 0 - /*************************************************************************/ - /* */ - /* CFF_CONFIG_OPTION_OLD_ENGINE controls whether the pre-Adobe CFF */ - /* engine gets compiled into FreeType. If defined, it is possible to */ - /* switch between the two engines using the `hinting-engine' property of */ - /* the cff driver module. */ - /* */ + /************************************************************************** + * + * `CFF_CONFIG_OPTION_OLD_ENGINE` controls whether the pre-Adobe CFF engine + * gets compiled into FreeType. If defined, it is possible to switch + * between the two engines using the `hinting-engine` property of the 'cff' + * driver module. + */ /* #define CFF_CONFIG_OPTION_OLD_ENGINE */ @@ -834,21 +832,21 @@ FT_BEGIN_HEADER /*************************************************************************/ - /*************************************************************************/ - /* */ - /* There are many PCF fonts just called `Fixed' which look completely */ - /* different, and which have nothing to do with each other. When */ - /* selecting `Fixed' in KDE or Gnome one gets results that appear rather */ - /* random, the style changes often if one changes the size and one */ - /* cannot select some fonts at all. This option makes the PCF module */ - /* prepend the foundry name (plus a space) to the family name. */ - /* */ - /* We also check whether we have `wide' characters; all put together, we */ - /* get family names like `Sony Fixed' or `Misc Fixed Wide'. */ - /* */ - /* If this option is activated, it can be controlled with the */ - /* `no-long-family-names' property of the pcf driver module. */ - /* */ + /************************************************************************** + * + * There are many PCF fonts just called 'Fixed' which look completely + * different, and which have nothing to do with each other. When selecting + * 'Fixed' in KDE or Gnome one gets results that appear rather random, the + * style changes often if one changes the size and one cannot select some + * fonts at all. This option makes the 'pcf' module prepend the foundry + * name (plus a space) to the family name. + * + * We also check whether we have 'wide' characters; all put together, we + * get family names like 'Sony Fixed' or 'Misc Fixed Wide'. + * + * If this option is activated, it can be controlled with the + * `no-long-family-names` property of the 'pcf' driver module. + */ /* #define PCF_CONFIG_OPTION_LONG_FAMILY_NAMES */ @@ -861,69 +859,76 @@ FT_BEGIN_HEADER /*************************************************************************/ - /*************************************************************************/ - /* */ - /* Compile autofit module with CJK (Chinese, Japanese, Korean) script */ - /* support. */ - /* */ + /************************************************************************** + * + * Compile 'autofit' module with CJK (Chinese, Japanese, Korean) script + * support. + */ #define AF_CONFIG_OPTION_CJK - /*************************************************************************/ - /* */ - /* Compile autofit module with fallback Indic script support, covering */ - /* some scripts that the `latin' submodule of the autofit module doesn't */ - /* (yet) handle. */ - /* */ + + /************************************************************************** + * + * Compile 'autofit' module with fallback Indic script support, covering + * some scripts that the 'latin' submodule of the 'autofit' module doesn't + * (yet) handle. + */ #define AF_CONFIG_OPTION_INDIC - /*************************************************************************/ - /* */ - /* Compile autofit module with warp hinting. The idea of the warping */ - /* code is to slightly scale and shift a glyph within a single dimension */ - /* so that as much of its segments are aligned (more or less) on the */ - /* grid. To find out the optimal scaling and shifting value, various */ - /* parameter combinations are tried and scored. */ - /* */ - /* This experimental option is active only if the rendering mode is */ - /* FT_RENDER_MODE_LIGHT; you can switch warping on and off with the */ - /* `warping' property of the auto-hinter (see file `ftdriver.h' for more */ - /* information; by default it is switched off). */ - /* */ + + /************************************************************************** + * + * Compile 'autofit' module with warp hinting. The idea of the warping + * code is to slightly scale and shift a glyph within a single dimension so + * that as much of its segments are aligned (more or less) on the grid. To + * find out the optimal scaling and shifting value, various parameter + * combinations are tried and scored. + * + * You can switch warping on and off with the `warping` property of the + * auto-hinter (see file `ftdriver.h` for more information; by default it + * is switched off). + * + * This experimental option is not active if the rendering mode is + * `FT_RENDER_MODE_LIGHT`. + */ #define AF_CONFIG_OPTION_USE_WARPER - /*************************************************************************/ - /* */ - /* Use TrueType-like size metrics for `light' auto-hinting. */ - /* */ - /* It is strongly recommended to avoid this option, which exists only to */ - /* help some legacy applications retain its appearance and behaviour */ - /* with respect to auto-hinted TrueType fonts. */ - /* */ - /* The very reason this option exists at all are GNU/Linux distributions */ - /* like Fedora that did not un-patch the following change (which was */ - /* present in FreeType between versions 2.4.6 and 2.7.1, inclusive). */ - /* */ - /* 2011-07-16 Steven Chu <steven.f.chu@gmail.com> */ - /* */ - /* [truetype] Fix metrics on size request for scalable fonts. */ - /* */ - /* This problematic commit is now reverted (more or less). */ - /* */ + + /************************************************************************** + * + * Use TrueType-like size metrics for 'light' auto-hinting. + * + * It is strongly recommended to avoid this option, which exists only to + * help some legacy applications retain its appearance and behaviour with + * respect to auto-hinted TrueType fonts. + * + * The very reason this option exists at all are GNU/Linux distributions + * like Fedora that did not un-patch the following change (which was + * present in FreeType between versions 2.4.6 and 2.7.1, inclusive). + * + * ``` + * 2011-07-16 Steven Chu <steven.f.chu@gmail.com> + * + * [truetype] Fix metrics on size request for scalable fonts. + * ``` + * + * This problematic commit is now reverted (more or less). + */ /* #define AF_CONFIG_OPTION_TT_SIZE_METRICS */ /* */ /* - * This macro is obsolete. Support has been removed in FreeType - * version 2.5. + * This macro is obsolete. Support has been removed in FreeType version + * 2.5. */ /* #define FT_CONFIG_OPTION_OLD_INTERNALS */ /* - * This macro is defined if native TrueType hinting is requested by the - * definitions above. + * The next three macros are defined if native TrueType hinting is + * requested by the definitions above. Don't change this. */ #ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER #define TT_USE_BYTECODE_INTERPRETER @@ -942,7 +947,7 @@ FT_BEGIN_HEADER /* * Check CFF darkening parameters. The checks are the same as in function - * `cff_property_set' in file `cffdrivr.c'. + * `cff_property_set` in file `cffdrivr.c`. */ #if CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 < 0 || \ CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 < 0 || \ diff --git a/src/3rdparty/freetype/include/freetype/config/ftstdlib.h b/src/3rdparty/freetype/include/freetype/config/ftstdlib.h index 42f9a06e43..438b6145d5 100644 --- a/src/3rdparty/freetype/include/freetype/config/ftstdlib.h +++ b/src/3rdparty/freetype/include/freetype/config/ftstdlib.h @@ -1,31 +1,31 @@ -/***************************************************************************/ -/* */ -/* ftstdlib.h */ -/* */ -/* ANSI-specific library and header configuration file (specification */ -/* only). */ -/* */ -/* Copyright 2002-2018 by */ -/* David Turner, Robert Wilhelm, and Werner Lemberg. */ -/* */ -/* This file is part of the FreeType project, and may only be used, */ -/* modified, and distributed under the terms of the FreeType project */ -/* license, LICENSE.TXT. By continuing to use, modify, or distribute */ -/* this file you indicate that you have read the license and */ -/* understand and accept it fully. */ -/* */ -/***************************************************************************/ - - - /*************************************************************************/ - /* */ - /* This file is used to group all #includes to the ANSI C library that */ - /* FreeType normally requires. It also defines macros to rename the */ - /* standard functions within the FreeType source code. */ - /* */ - /* Load a file which defines FTSTDLIB_H_ before this one to override it. */ - /* */ - /*************************************************************************/ +/**************************************************************************** + * + * ftstdlib.h + * + * ANSI-specific library and header configuration file (specification + * only). + * + * Copyright (C) 2002-2019 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This file is used to group all `#includes` to the ANSI~C library that + * FreeType normally requires. It also defines macros to rename the + * standard functions within the FreeType source code. + * + * Load a file which defines `FTSTDLIB_H_` before this one to override it. + * + */ #ifndef FTSTDLIB_H_ @@ -37,23 +37,23 @@ #define ft_ptrdiff_t ptrdiff_t - /**********************************************************************/ - /* */ - /* integer limits */ - /* */ - /* UINT_MAX and ULONG_MAX are used to automatically compute the size */ - /* of `int' and `long' in bytes at compile-time. So far, this works */ - /* for all platforms the library has been tested on. */ - /* */ - /* Note that on the extremely rare platforms that do not provide */ - /* integer types that are _exactly_ 16 and 32 bits wide (e.g. some */ - /* old Crays where `int' is 36 bits), we do not make any guarantee */ - /* about the correct behaviour of FT2 with all fonts. */ - /* */ - /* In these case, `ftconfig.h' will refuse to compile anyway with a */ - /* message like `couldn't find 32-bit type' or something similar. */ - /* */ - /**********************************************************************/ + /************************************************************************** + * + * integer limits + * + * `UINT_MAX` and `ULONG_MAX` are used to automatically compute the size of + * `int` and `long` in bytes at compile-time. So far, this works for all + * platforms the library has been tested on. + * + * Note that on the extremely rare platforms that do not provide integer + * types that are _exactly_ 16 and 32~bits wide (e.g., some old Crays where + * `int` is 36~bits), we do not make any guarantee about the correct + * behaviour of FreeType~2 with all fonts. + * + * In these cases, `ftconfig.h` will refuse to compile anyway with a + * message like 'couldn't find 32-bit type' or something similar. + * + */ #include <limits.h> @@ -68,11 +68,11 @@ #define FT_ULONG_MAX ULONG_MAX - /**********************************************************************/ - /* */ - /* character and string processing */ - /* */ - /**********************************************************************/ + /************************************************************************** + * + * character and string processing + * + */ #include <string.h> @@ -92,11 +92,11 @@ #define ft_strstr strstr - /**********************************************************************/ - /* */ - /* file handling */ - /* */ - /**********************************************************************/ + /************************************************************************** + * + * file handling + * + */ #include <stdio.h> @@ -110,11 +110,11 @@ #define ft_sprintf sprintf - /**********************************************************************/ - /* */ - /* sorting */ - /* */ - /**********************************************************************/ + /************************************************************************** + * + * sorting + * + */ #include <stdlib.h> @@ -122,11 +122,11 @@ #define ft_qsort qsort - /**********************************************************************/ - /* */ - /* memory allocation */ - /* */ - /**********************************************************************/ + /************************************************************************** + * + * memory allocation + * + */ #define ft_scalloc calloc @@ -135,36 +135,36 @@ #define ft_srealloc realloc - /**********************************************************************/ - /* */ - /* miscellaneous */ - /* */ - /**********************************************************************/ + /************************************************************************** + * + * miscellaneous + * + */ #define ft_strtol strtol #define ft_getenv getenv - /**********************************************************************/ - /* */ - /* execution control */ - /* */ - /**********************************************************************/ + /************************************************************************** + * + * execution control + * + */ #include <setjmp.h> -#define ft_jmp_buf jmp_buf /* note: this cannot be a typedef since */ - /* jmp_buf is defined as a macro */ - /* on certain platforms */ +#define ft_jmp_buf jmp_buf /* note: this cannot be a typedef since */ + /* `jmp_buf` is defined as a macro */ + /* on certain platforms */ #define ft_longjmp longjmp #define ft_setjmp( b ) setjmp( *(ft_jmp_buf*) &(b) ) /* same thing here */ - /* the following is only used for debugging purposes, i.e., if */ - /* FT_DEBUG_LEVEL_ERROR or FT_DEBUG_LEVEL_TRACE are defined */ + /* The following is only used for debugging purposes, i.e., if */ + /* `FT_DEBUG_LEVEL_ERROR` or `FT_DEBUG_LEVEL_TRACE` are defined. */ #include <stdarg.h> |