diff options
Diffstat (limited to 'src/3rdparty/freetype/src/autofit')
49 files changed, 1131 insertions, 5025 deletions
diff --git a/src/3rdparty/freetype/src/autofit/Jamfile b/src/3rdparty/freetype/src/autofit/Jamfile deleted file mode 100644 index ea69dee377..0000000000 --- a/src/3rdparty/freetype/src/autofit/Jamfile +++ /dev/null @@ -1,53 +0,0 @@ -# FreeType 2 src/autofit Jamfile -# -# Copyright (C) 2003-2019 by -# David Turner, Robert Wilhelm, and Werner Lemberg. -# -# This file is part of the FreeType project, and may only be used, modified, -# and distributed under the terms of the FreeType project license, -# LICENSE.TXT. By continuing to use, modify, or distribute this file you -# indicate that you have read the license and understand and accept it -# fully. - -SubDir FT2_TOP src autofit ; - -{ - local _sources ; - - # define FT2_AUTOFIT2 to enable experimental latin hinter replacement - if $(FT2_AUTOFIT2) - { - CCFLAGS += FT_OPTION_AUTOFIT2 ; - } - if $(FT2_MULTI) - { - _sources = afangles - afblue - afcjk - afdummy - afglobal - afhints - afindic - aflatin - afloader - afmodule - afpic - afranges - afshaper - afwarp - ; - - if $(FT2_AUTOFIT2) - { - _sources += aflatin2 ; - } - } - else - { - _sources = autofit ; - } - - Library $(FT2_LIB) : $(_sources).c ; -} - -# end of src/autofit Jamfile diff --git a/src/3rdparty/freetype/src/autofit/afangles.c b/src/3rdparty/freetype/src/autofit/afangles.c deleted file mode 100644 index 9e1f7a21ff..0000000000 --- a/src/3rdparty/freetype/src/autofit/afangles.c +++ /dev/null @@ -1,285 +0,0 @@ -/**************************************************************************** - * - * afangles.c - * - * Routines used to compute vector angles with limited accuracy - * and very high speed. It also contains sorting routines (body). - * - * Copyright (C) 2003-2019 by - * David Turner, Robert Wilhelm, and Werner Lemberg. - * - * This file is part of the FreeType project, and may only be used, - * modified, and distributed under the terms of the FreeType project - * license, LICENSE.TXT. By continuing to use, modify, or distribute - * this file you indicate that you have read the license and - * understand and accept it fully. - * - */ - - -#include "aftypes.h" - - - /* - * We are not using `af_angle_atan' anymore, but we keep the source - * code below just in case... - */ - - -#if 0 - - - /* - * The trick here is to realize that we don't need a very accurate angle - * approximation. We are going to use the result of `af_angle_atan' to - * only compare the sign of angle differences, or check whether its - * magnitude is very small. - * - * The approximation - * - * dy * PI / (|dx|+|dy|) - * - * should be enough, and much faster to compute. - */ - FT_LOCAL_DEF( AF_Angle ) - af_angle_atan( FT_Fixed dx, - FT_Fixed dy ) - { - AF_Angle angle; - FT_Fixed ax = dx; - FT_Fixed ay = dy; - - - if ( ax < 0 ) - ax = -ax; - if ( ay < 0 ) - ay = -ay; - - ax += ay; - - if ( ax == 0 ) - angle = 0; - else - { - angle = ( AF_ANGLE_PI2 * dy ) / ( ax + ay ); - if ( dx < 0 ) - { - if ( angle >= 0 ) - angle = AF_ANGLE_PI - angle; - else - angle = -AF_ANGLE_PI - angle; - } - } - - return angle; - } - - -#elif 0 - - - /* the following table has been automatically generated with */ - /* the `mather.py' Python script */ - -#define AF_ATAN_BITS 8 - - static const FT_Byte af_arctan[1L << AF_ATAN_BITS] = - { - 0, 0, 1, 1, 1, 2, 2, 2, - 3, 3, 3, 3, 4, 4, 4, 5, - 5, 5, 6, 6, 6, 7, 7, 7, - 8, 8, 8, 9, 9, 9, 10, 10, - 10, 10, 11, 11, 11, 12, 12, 12, - 13, 13, 13, 14, 14, 14, 14, 15, - 15, 15, 16, 16, 16, 17, 17, 17, - 18, 18, 18, 18, 19, 19, 19, 20, - 20, 20, 21, 21, 21, 21, 22, 22, - 22, 23, 23, 23, 24, 24, 24, 24, - 25, 25, 25, 26, 26, 26, 26, 27, - 27, 27, 28, 28, 28, 28, 29, 29, - 29, 30, 30, 30, 30, 31, 31, 31, - 31, 32, 32, 32, 33, 33, 33, 33, - 34, 34, 34, 34, 35, 35, 35, 35, - 36, 36, 36, 36, 37, 37, 37, 38, - 38, 38, 38, 39, 39, 39, 39, 40, - 40, 40, 40, 41, 41, 41, 41, 42, - 42, 42, 42, 42, 43, 43, 43, 43, - 44, 44, 44, 44, 45, 45, 45, 45, - 46, 46, 46, 46, 46, 47, 47, 47, - 47, 48, 48, 48, 48, 48, 49, 49, - 49, 49, 50, 50, 50, 50, 50, 51, - 51, 51, 51, 51, 52, 52, 52, 52, - 52, 53, 53, 53, 53, 53, 54, 54, - 54, 54, 54, 55, 55, 55, 55, 55, - 56, 56, 56, 56, 56, 57, 57, 57, - 57, 57, 57, 58, 58, 58, 58, 58, - 59, 59, 59, 59, 59, 59, 60, 60, - 60, 60, 60, 61, 61, 61, 61, 61, - 61, 62, 62, 62, 62, 62, 62, 63, - 63, 63, 63, 63, 63, 64, 64, 64 - }; - - - FT_LOCAL_DEF( AF_Angle ) - af_angle_atan( FT_Fixed dx, - FT_Fixed dy ) - { - AF_Angle angle; - - - /* check trivial cases */ - if ( dy == 0 ) - { - angle = 0; - if ( dx < 0 ) - angle = AF_ANGLE_PI; - return angle; - } - else if ( dx == 0 ) - { - angle = AF_ANGLE_PI2; - if ( dy < 0 ) - angle = -AF_ANGLE_PI2; - return angle; - } - - angle = 0; - if ( dx < 0 ) - { - dx = -dx; - dy = -dy; - angle = AF_ANGLE_PI; - } - - if ( dy < 0 ) - { - FT_Pos tmp; - - - tmp = dx; - dx = -dy; - dy = tmp; - angle -= AF_ANGLE_PI2; - } - - if ( dx == 0 && dy == 0 ) - return 0; - - if ( dx == dy ) - angle += AF_ANGLE_PI4; - else if ( dx > dy ) - angle += af_arctan[FT_DivFix( dy, dx ) >> ( 16 - AF_ATAN_BITS )]; - else - angle += AF_ANGLE_PI2 - - af_arctan[FT_DivFix( dx, dy ) >> ( 16 - AF_ATAN_BITS )]; - - if ( angle > AF_ANGLE_PI ) - angle -= AF_ANGLE_2PI; - - return angle; - } - - -#endif /* 0 */ - - - FT_LOCAL_DEF( void ) - af_sort_pos( FT_UInt count, - FT_Pos* table ) - { - FT_UInt i, j; - FT_Pos swap; - - - for ( i = 1; i < count; i++ ) - { - for ( j = i; j > 0; j-- ) - { - if ( table[j] >= table[j - 1] ) - break; - - swap = table[j]; - table[j] = table[j - 1]; - table[j - 1] = swap; - } - } - } - - - FT_LOCAL_DEF( void ) - af_sort_and_quantize_widths( FT_UInt* count, - AF_Width table, - FT_Pos threshold ) - { - FT_UInt i, j; - FT_UInt cur_idx; - FT_Pos cur_val; - FT_Pos sum; - AF_WidthRec swap; - - - if ( *count == 1 ) - return; - - /* sort */ - for ( i = 1; i < *count; i++ ) - { - for ( j = i; j > 0; j-- ) - { - if ( table[j].org >= table[j - 1].org ) - break; - - swap = table[j]; - table[j] = table[j - 1]; - table[j - 1] = swap; - } - } - - cur_idx = 0; - cur_val = table[cur_idx].org; - - /* compute and use mean values for clusters not larger than */ - /* `threshold'; this is very primitive and might not yield */ - /* the best result, but normally, using reference character */ - /* `o', `*count' is 2, so the code below is fully sufficient */ - for ( i = 1; i < *count; i++ ) - { - if ( table[i].org - cur_val > threshold || - i == *count - 1 ) - { - sum = 0; - - /* fix loop for end of array */ - if ( table[i].org - cur_val <= threshold && - i == *count - 1 ) - i++; - - for ( j = cur_idx; j < i; j++ ) - { - sum += table[j].org; - table[j].org = 0; - } - table[cur_idx].org = sum / (FT_Pos)j; - - if ( i < *count - 1 ) - { - cur_idx = i + 1; - cur_val = table[cur_idx].org; - } - } - } - - cur_idx = 1; - - /* compress array to remove zero values */ - for ( i = 1; i < *count; i++ ) - { - if ( table[i].org ) - table[cur_idx++] = table[i]; - } - - *count = cur_idx; - } - - -/* END */ diff --git a/src/3rdparty/freetype/src/autofit/afangles.h b/src/3rdparty/freetype/src/autofit/afangles.h deleted file mode 100644 index 18d7dae3a6..0000000000 --- a/src/3rdparty/freetype/src/autofit/afangles.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * afangles.h - * - * This is a dummy file, used to please the build system. It is never - * included by the auto-fitter sources. - * - */ diff --git a/src/3rdparty/freetype/src/autofit/afblue.c b/src/3rdparty/freetype/src/autofit/afblue.c index b99dbeb19c..d7655b9b99 100644 --- a/src/3rdparty/freetype/src/autofit/afblue.c +++ b/src/3rdparty/freetype/src/autofit/afblue.c @@ -7,7 +7,7 @@ * * Auto-fitter data for blue strings (body). * - * Copyright (C) 2013-2019 by + * Copyright (C) 2013-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -134,7 +134,7 @@ '\0', '\xF0', '\x90', '\x90', '\xA8', ' ', '\xF0', '\x90', '\x90', '\xAA', ' ', '\xF0', '\x90', '\x90', '\xAC', ' ', '\xF0', '\x90', '\x90', '\xBF', ' ', '\xF0', '\x90', '\x91', '\x83', /* 𐐨 𐐪 𐐬 𐐿 𐑃 */ '\0', - '\xE0', '\xA4', '\x95', ' ', '\xE0', '\xA4', '\xAE', ' ', '\xE0', '\xA4', '\x85', ' ', '\xE0', '\xA4', '\x86', ' ', '\xE0', '\xA4', '\xA5', ' ', '\xE0', '\xA4', '\xA7', ' ', '\xE0', '\xA4', '\xAD', ' ', '\xE0', '\xA4', '\xB6', /* क म अ आ थ ध भ श */ + '\xE0', '\xA4', '\x95', ' ', '\xE0', '\xA4', '\xA8', ' ', '\xE0', '\xA4', '\xAE', ' ', '\xE0', '\xA4', '\x89', ' ', '\xE0', '\xA4', '\x9B', ' ', '\xE0', '\xA4', '\x9F', ' ', '\xE0', '\xA4', '\xA0', ' ', '\xE0', '\xA4', '\xA1', /* क न म उ छ ट ठ ड */ '\0', '\xE0', '\xA4', '\x88', ' ', '\xE0', '\xA4', '\x90', ' ', '\xE0', '\xA4', '\x93', ' ', '\xE0', '\xA4', '\x94', ' ', '\xE0', '\xA4', '\xBF', ' ', '\xE0', '\xA5', '\x80', ' ', '\xE0', '\xA5', '\x8B', ' ', '\xE0', '\xA5', '\x8C', /* ई ऐ ओ औ ि ी ो ौ */ '\0', @@ -296,6 +296,20 @@ '\0', '\xE0', '\xB4', '\x9F', ' ', '\xE0', '\xB4', '\xA0', ' ', '\xE0', '\xB4', '\xA7', ' ', '\xE0', '\xB4', '\xB6', ' ', '\xE0', '\xB4', '\x98', ' ', '\xE0', '\xB4', '\x9A', ' ', '\xE0', '\xB4', '\xA5', ' ', '\xE0', '\xB4', '\xB2', /* ട ഠ ധ ശ ഘ ച ഥ ല */ '\0', + '\xF0', '\x96', '\xB9', '\x80', ' ', '\xF0', '\x96', '\xB9', '\x81', ' ', '\xF0', '\x96', '\xB9', '\x82', ' ', '\xF0', '\x96', '\xB9', '\x83', ' ', '\xF0', '\x96', '\xB9', '\x8F', ' ', '\xF0', '\x96', '\xB9', '\x9A', ' ', '\xF0', '\x96', '\xB9', '\x9F', /* 𖹀 𖹁 𖹂 𖹃 𖹏 𖹚 𖹟 */ + '\0', + '\xF0', '\x96', '\xB9', '\x80', ' ', '\xF0', '\x96', '\xB9', '\x81', ' ', '\xF0', '\x96', '\xB9', '\x82', ' ', '\xF0', '\x96', '\xB9', '\x83', ' ', '\xF0', '\x96', '\xB9', '\x8F', ' ', '\xF0', '\x96', '\xB9', '\x9A', ' ', '\xF0', '\x96', '\xB9', '\x92', ' ', '\xF0', '\x96', '\xB9', '\x93', /* 𖹀 𖹁 𖹂 𖹃 𖹏 𖹚 𖹒 𖹓 */ + '\0', + '\xF0', '\x96', '\xB9', '\xA4', ' ', '\xF0', '\x96', '\xB9', '\xAC', ' ', '\xF0', '\x96', '\xB9', '\xA7', ' ', '\xF0', '\x96', '\xB9', '\xB4', ' ', '\xF0', '\x96', '\xB9', '\xB6', ' ', '\xF0', '\x96', '\xB9', '\xBE', /* 𖹤 𖹬 𖹧 𖹴 𖹶 𖹾 */ + '\0', + '\xF0', '\x96', '\xB9', '\xA0', ' ', '\xF0', '\x96', '\xB9', '\xA1', ' ', '\xF0', '\x96', '\xB9', '\xA2', ' ', '\xF0', '\x96', '\xB9', '\xB9', ' ', '\xF0', '\x96', '\xB9', '\xB3', ' ', '\xF0', '\x96', '\xB9', '\xAE', /* 𖹠 𖹡 𖹢 𖹹 𖹳 𖹮 */ + '\0', + '\xF0', '\x96', '\xB9', '\xA0', ' ', '\xF0', '\x96', '\xB9', '\xA1', ' ', '\xF0', '\x96', '\xB9', '\xA2', ' ', '\xF0', '\x96', '\xB9', '\xB3', ' ', '\xF0', '\x96', '\xB9', '\xAD', ' ', '\xF0', '\x96', '\xB9', '\xBD', /* 𖹠 𖹡 𖹢 𖹳 𖹭 𖹽 */ + '\0', + '\xF0', '\x96', '\xB9', '\xA5', ' ', '\xF0', '\x96', '\xB9', '\xA8', ' ', '\xF0', '\x96', '\xB9', '\xA9', /* 𖹥 𖹨 𖹩 */ + '\0', + '\xF0', '\x96', '\xBA', '\x80', ' ', '\xF0', '\x96', '\xBA', '\x85', ' ', '\xF0', '\x96', '\xBA', '\x88', ' ', '\xF0', '\x96', '\xBA', '\x84', ' ', '\xF0', '\x96', '\xBA', '\x8D', /* 𖺀 𖺅 𖺈 𖺄 𖺍 */ + '\0', '\xE1', '\xA0', '\xB3', ' ', '\xE1', '\xA0', '\xB4', ' ', '\xE1', '\xA0', '\xB6', ' ', '\xE1', '\xA0', '\xBD', ' ', '\xE1', '\xA1', '\x82', ' ', '\xE1', '\xA1', '\x8A', ' ', '\xE2', '\x80', '\x8D', '\xE1', '\xA1', '\xA1', '\xE2', '\x80', '\x8D', ' ', '\xE2', '\x80', '\x8D', '\xE1', '\xA1', '\xB3', '\xE2', '\x80', '\x8D', /* ᠳ ᠴ ᠶ ᠽ ᡂ ᡊ ᡡ ᡳ */ '\0', '\xE1', '\xA1', '\x83', /* ᡃ */ @@ -340,6 +354,12 @@ '\0', '\xF0', '\x90', '\x92', '\x80', ' ', '\xF0', '\x90', '\x92', '\x82', ' ', '\xF0', '\x90', '\x92', '\x86', ' ', '\xF0', '\x90', '\x92', '\x88', ' ', '\xF0', '\x90', '\x92', '\x8A', ' ', '\xF0', '\x90', '\x92', '\x92', ' ', '\xF0', '\x90', '\x92', '\xA0', ' ', '\xF0', '\x90', '\x92', '\xA9', /* 𐒀 𐒂 𐒆 𐒈 𐒊 𐒒 𐒠 𐒩 */ '\0', + '\xF0', '\x90', '\xB4', '\x83', ' ', '\xF0', '\x90', '\xB4', '\x80', ' ', '\xF0', '\x90', '\xB4', '\x86', ' ', '\xF0', '\x90', '\xB4', '\x96', ' ', '\xF0', '\x90', '\xB4', '\x95', /* 𐴃 𐴀 𐴆 𐴖 𐴕 */ + '\0', + '\xF0', '\x90', '\xB4', '\x94', ' ', '\xF0', '\x90', '\xB4', '\x96', ' ', '\xF0', '\x90', '\xB4', '\x95', ' ', '\xF0', '\x90', '\xB4', '\x91', ' ', '\xF0', '\x90', '\xB4', '\x90', /* 𐴔 𐴖 𐴕 𐴑 𐴐 */ + '\0', + '\xD9', '\x80', /* ـ */ + '\0', '\xEA', '\xA2', '\x9C', ' ', '\xEA', '\xA2', '\x9E', ' ', '\xEA', '\xA2', '\xB3', ' ', '\xEA', '\xA2', '\x82', ' ', '\xEA', '\xA2', '\x96', ' ', '\xEA', '\xA2', '\x92', ' ', '\xEA', '\xA2', '\x9D', ' ', '\xEA', '\xA2', '\x9B', /* ꢜ ꢞ ꢳ ꢂ ꢖ ꢒ ꢝ ꢛ */ '\0', '\xEA', '\xA2', '\x82', ' ', '\xEA', '\xA2', '\xA8', ' ', '\xEA', '\xA2', '\xBA', ' ', '\xEA', '\xA2', '\xA4', ' ', '\xEA', '\xA2', '\x8E', /* ꢂ ꢨ ꢺ ꢤ ꢎ */ @@ -488,14 +508,14 @@ { AF_BLUE_STRING_CHAKMA_BOTTOM, 0 }, { AF_BLUE_STRING_CHAKMA_DESCENDER, 0 }, { AF_BLUE_STRING_MAX, 0 }, - { AF_BLUE_STRING_CANADIAN_SYLLABICS_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, - { AF_BLUE_STRING_CANADIAN_SYLLABICS_BOTTOM, 0 }, - { AF_BLUE_STRING_CANADIAN_SYLLABICS_SMALL_TOP, AF_BLUE_PROPERTY_LATIN_TOP | - AF_BLUE_PROPERTY_LATIN_X_HEIGHT }, - { AF_BLUE_STRING_CANADIAN_SYLLABICS_SMALL_BOTTOM, 0 }, - { AF_BLUE_STRING_CANADIAN_SYLLABICS_SUPS_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, - { AF_BLUE_STRING_CANADIAN_SYLLABICS_SUPS_BOTTOM, 0 }, - { AF_BLUE_STRING_MAX, 0 }, + { AF_BLUE_STRING_CANADIAN_SYLLABICS_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, + { AF_BLUE_STRING_CANADIAN_SYLLABICS_BOTTOM, 0 }, + { AF_BLUE_STRING_CANADIAN_SYLLABICS_SMALL_TOP, AF_BLUE_PROPERTY_LATIN_TOP | + AF_BLUE_PROPERTY_LATIN_X_HEIGHT }, + { AF_BLUE_STRING_CANADIAN_SYLLABICS_SMALL_BOTTOM, 0 }, + { AF_BLUE_STRING_CANADIAN_SYLLABICS_SUPS_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, + { AF_BLUE_STRING_CANADIAN_SYLLABICS_SUPS_BOTTOM, 0 }, + { AF_BLUE_STRING_MAX, 0 }, { AF_BLUE_STRING_CARIAN_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, { AF_BLUE_STRING_CARIAN_BOTTOM, 0 }, { AF_BLUE_STRING_MAX, 0 }, @@ -595,6 +615,9 @@ { AF_BLUE_STRING_HEBREW_BOTTOM, 0 }, { AF_BLUE_STRING_HEBREW_DESCENDER, 0 }, { AF_BLUE_STRING_MAX, 0 }, + { AF_BLUE_STRING_KANNADA_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, + { AF_BLUE_STRING_KANNADA_BOTTOM, 0 }, + { AF_BLUE_STRING_MAX, 0 }, { AF_BLUE_STRING_KAYAH_LI_TOP, AF_BLUE_PROPERTY_LATIN_TOP | AF_BLUE_PROPERTY_LATIN_X_HEIGHT }, { AF_BLUE_STRING_KAYAH_LI_BOTTOM, 0 }, @@ -613,9 +636,6 @@ AF_BLUE_PROPERTY_LATIN_X_HEIGHT }, { AF_BLUE_STRING_KHMER_SYMBOLS_WANING_BOTTOM, 0 }, { AF_BLUE_STRING_MAX, 0 }, - { AF_BLUE_STRING_KANNADA_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, - { AF_BLUE_STRING_KANNADA_BOTTOM, 0 }, - { AF_BLUE_STRING_MAX, 0 }, { AF_BLUE_STRING_LAO_TOP, AF_BLUE_PROPERTY_LATIN_TOP | AF_BLUE_PROPERTY_LATIN_X_HEIGHT }, { AF_BLUE_STRING_LAO_BOTTOM, 0 }, @@ -653,6 +673,15 @@ { AF_BLUE_STRING_MALAYALAM_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, { AF_BLUE_STRING_MALAYALAM_BOTTOM, 0 }, { AF_BLUE_STRING_MAX, 0 }, + { AF_BLUE_STRING_MEDEFAIDRIN_CAPITAL_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, + { AF_BLUE_STRING_MEDEFAIDRIN_CAPITAL_BOTTOM, 0 }, + { AF_BLUE_STRING_MEDEFAIDRIN_SMALL_F_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, + { AF_BLUE_STRING_MEDEFAIDRIN_SMALL_TOP, AF_BLUE_PROPERTY_LATIN_TOP | + AF_BLUE_PROPERTY_LATIN_X_HEIGHT }, + { AF_BLUE_STRING_MEDEFAIDRIN_SMALL_BOTTOM, 0 }, + { AF_BLUE_STRING_MEDEFAIDRIN_SMALL_DESCENDER, 0 }, + { AF_BLUE_STRING_MEDEFAIDRIN_DIGIT_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, + { AF_BLUE_STRING_MAX, 0 }, { AF_BLUE_STRING_MONGOLIAN_TOP_BASE, AF_BLUE_PROPERTY_LATIN_TOP }, { AF_BLUE_STRING_MONGOLIAN_BOTTOM_BASE, 0 }, { AF_BLUE_STRING_MAX, 0 }, @@ -687,6 +716,10 @@ { AF_BLUE_STRING_OSMANYA_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, { AF_BLUE_STRING_OSMANYA_BOTTOM, 0 }, { AF_BLUE_STRING_MAX, 0 }, + { AF_BLUE_STRING_ROHINGYA_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, + { AF_BLUE_STRING_ROHINGYA_BOTTOM, 0 }, + { AF_BLUE_STRING_ROHINGYA_JOIN, AF_BLUE_PROPERTY_LATIN_NEUTRAL }, + { AF_BLUE_STRING_MAX, 0 }, { AF_BLUE_STRING_SAURASHTRA_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, { AF_BLUE_STRING_SAURASHTRA_BOTTOM, 0 }, { AF_BLUE_STRING_MAX, 0 }, @@ -714,9 +747,6 @@ { AF_BLUE_STRING_TELUGU_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, { AF_BLUE_STRING_TELUGU_BOTTOM, 0 }, { AF_BLUE_STRING_MAX, 0 }, - { AF_BLUE_STRING_TIFINAGH, AF_BLUE_PROPERTY_LATIN_TOP }, - { AF_BLUE_STRING_TIFINAGH, 0 }, - { AF_BLUE_STRING_MAX, 0 }, { AF_BLUE_STRING_THAI_TOP, AF_BLUE_PROPERTY_LATIN_TOP | AF_BLUE_PROPERTY_LATIN_X_HEIGHT }, { AF_BLUE_STRING_THAI_BOTTOM, 0 }, @@ -726,6 +756,9 @@ { AF_BLUE_STRING_THAI_LARGE_DESCENDER, 0 }, { AF_BLUE_STRING_THAI_DIGIT_TOP, 0 }, { AF_BLUE_STRING_MAX, 0 }, + { AF_BLUE_STRING_TIFINAGH, AF_BLUE_PROPERTY_LATIN_TOP }, + { AF_BLUE_STRING_TIFINAGH, 0 }, + { AF_BLUE_STRING_MAX, 0 }, { AF_BLUE_STRING_VAI_TOP, AF_BLUE_PROPERTY_LATIN_TOP }, { AF_BLUE_STRING_VAI_BOTTOM, 0 }, { AF_BLUE_STRING_MAX, 0 }, diff --git a/src/3rdparty/freetype/src/autofit/afblue.cin b/src/3rdparty/freetype/src/autofit/afblue.cin index 6545d1fd43..d561c5093b 100644 --- a/src/3rdparty/freetype/src/autofit/afblue.cin +++ b/src/3rdparty/freetype/src/autofit/afblue.cin @@ -4,7 +4,7 @@ * * Auto-fitter data for blue strings (body). * - * Copyright (C) 2013-2019 by + * Copyright (C) 2013-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, diff --git a/src/3rdparty/freetype/src/autofit/afblue.dat b/src/3rdparty/freetype/src/autofit/afblue.dat index 46db43fe22..8299baa259 100644 --- a/src/3rdparty/freetype/src/autofit/afblue.dat +++ b/src/3rdparty/freetype/src/autofit/afblue.dat @@ -2,7 +2,7 @@ // // Auto-fitter data for blue strings. // -// Copyright (C) 2013-2019 by +// Copyright (C) 2013-2023 by // David Turner, Robert Wilhelm, and Werner Lemberg. // // This file is part of the FreeType project, and may only be used, @@ -89,7 +89,7 @@ AF_BLUE_STRING_ENUM AF_BLUE_STRINGS_ARRAY AF_BLUE_STRING_MAX_LEN: "ت ث ط ظ ك" // We don't necessarily have access to medial forms via Unicode in case // Arabic presentational forms are missing. The only character that is - // guaranteed to have the same vertical position with joining (this is, + // guaranteed to have the same vertical position with joining (that is, // non-isolated) forms is U+0640, ARABIC TATWEEL, which must join both // round and flat curves. AF_BLUE_STRING_ARABIC_JOIN @@ -203,7 +203,7 @@ AF_BLUE_STRING_ENUM AF_BLUE_STRINGS_ARRAY AF_BLUE_STRING_MAX_LEN: "𐐨 𐐪 𐐬 𐐿 𐑃" AF_BLUE_STRING_DEVANAGARI_BASE - "क म अ आ थ ध भ श" + "क न म उ छ ट ठ ड" AF_BLUE_STRING_DEVANAGARI_TOP "ई ऐ ओ औ ि ी ो ौ" // note that some fonts have extreme variation in the height of the @@ -392,6 +392,21 @@ AF_BLUE_STRING_ENUM AF_BLUE_STRINGS_ARRAY AF_BLUE_STRING_MAX_LEN: AF_BLUE_STRING_MALAYALAM_BOTTOM "ട ഠ ധ ശ ഘ ച ഥ ല" + AF_BLUE_STRING_MEDEFAIDRIN_CAPITAL_TOP + "𖹀 𖹁 𖹂 𖹃 𖹏 𖹚 𖹟" + AF_BLUE_STRING_MEDEFAIDRIN_CAPITAL_BOTTOM + "𖹀 𖹁 𖹂 𖹃 𖹏 𖹚 𖹒 𖹓" + AF_BLUE_STRING_MEDEFAIDRIN_SMALL_F_TOP + "𖹤 𖹬 𖹧 𖹴 𖹶 𖹾" + AF_BLUE_STRING_MEDEFAIDRIN_SMALL_TOP + "𖹠 𖹡 𖹢 𖹹 𖹳 𖹮" + AF_BLUE_STRING_MEDEFAIDRIN_SMALL_BOTTOM + "𖹠 𖹡 𖹢 𖹳 𖹭 𖹽" + AF_BLUE_STRING_MEDEFAIDRIN_SMALL_DESCENDER + "𖹥 𖹨 𖹩" + AF_BLUE_STRING_MEDEFAIDRIN_DIGIT_TOP + "𖺀 𖺅 𖺈 𖺄 𖺍" + AF_BLUE_STRING_MONGOLIAN_TOP_BASE "ᠳ ᠴ ᠶ ᠽ ᡂ ᡊ ᡡ ᡳ" AF_BLUE_STRING_MONGOLIAN_BOTTOM_BASE @@ -443,6 +458,13 @@ AF_BLUE_STRING_ENUM AF_BLUE_STRINGS_ARRAY AF_BLUE_STRING_MAX_LEN: AF_BLUE_STRING_OSMANYA_BOTTOM "𐒀 𐒂 𐒆 𐒈 𐒊 𐒒 𐒠 𐒩" + AF_BLUE_STRING_ROHINGYA_TOP + "𐴃 𐴀 𐴆 𐴖 𐴕" + AF_BLUE_STRING_ROHINGYA_BOTTOM + "𐴔 𐴖 𐴕 𐴑 𐴐" + AF_BLUE_STRING_ROHINGYA_JOIN + "ـ" + AF_BLUE_STRING_SAURASHTRA_TOP "ꢜ ꢞ ꢳ ꢂ ꢖ ꢒ ꢝ ꢛ" AF_BLUE_STRING_SAURASHTRA_BOTTOM @@ -734,14 +756,14 @@ AF_BLUE_STRINGSET_ENUM AF_BLUE_STRINGSETS_ARRAY AF_BLUE_STRINGSET_MAX_LEN: { AF_BLUE_STRING_MAX, 0 } AF_BLUE_STRINGSET_CANS - { AF_BLUE_STRING_CANADIAN_SYLLABICS_TOP, AF_BLUE_PROPERTY_LATIN_TOP } - { AF_BLUE_STRING_CANADIAN_SYLLABICS_BOTTOM, 0 } - { AF_BLUE_STRING_CANADIAN_SYLLABICS_SMALL_TOP, AF_BLUE_PROPERTY_LATIN_TOP | - AF_BLUE_PROPERTY_LATIN_X_HEIGHT } - { AF_BLUE_STRING_CANADIAN_SYLLABICS_SMALL_BOTTOM, 0 } - { AF_BLUE_STRING_CANADIAN_SYLLABICS_SUPS_TOP, AF_BLUE_PROPERTY_LATIN_TOP } - { AF_BLUE_STRING_CANADIAN_SYLLABICS_SUPS_BOTTOM, 0 } - { AF_BLUE_STRING_MAX, 0 } + { AF_BLUE_STRING_CANADIAN_SYLLABICS_TOP, AF_BLUE_PROPERTY_LATIN_TOP } + { AF_BLUE_STRING_CANADIAN_SYLLABICS_BOTTOM, 0 } + { AF_BLUE_STRING_CANADIAN_SYLLABICS_SMALL_TOP, AF_BLUE_PROPERTY_LATIN_TOP | + AF_BLUE_PROPERTY_LATIN_X_HEIGHT } + { AF_BLUE_STRING_CANADIAN_SYLLABICS_SMALL_BOTTOM, 0 } + { AF_BLUE_STRING_CANADIAN_SYLLABICS_SUPS_TOP, AF_BLUE_PROPERTY_LATIN_TOP } + { AF_BLUE_STRING_CANADIAN_SYLLABICS_SUPS_BOTTOM, 0 } + { AF_BLUE_STRING_MAX, 0 } AF_BLUE_STRINGSET_CARI { AF_BLUE_STRING_CARIAN_TOP, AF_BLUE_PROPERTY_LATIN_TOP } @@ -874,6 +896,11 @@ AF_BLUE_STRINGSET_ENUM AF_BLUE_STRINGSETS_ARRAY AF_BLUE_STRINGSET_MAX_LEN: { AF_BLUE_STRING_HEBREW_DESCENDER, 0 } { AF_BLUE_STRING_MAX, 0 } + AF_BLUE_STRINGSET_KNDA + { AF_BLUE_STRING_KANNADA_TOP, AF_BLUE_PROPERTY_LATIN_TOP } + { AF_BLUE_STRING_KANNADA_BOTTOM, 0 } + { AF_BLUE_STRING_MAX, 0 } + AF_BLUE_STRINGSET_KALI { AF_BLUE_STRING_KAYAH_LI_TOP, AF_BLUE_PROPERTY_LATIN_TOP | AF_BLUE_PROPERTY_LATIN_X_HEIGHT } @@ -898,11 +925,6 @@ AF_BLUE_STRINGSET_ENUM AF_BLUE_STRINGSETS_ARRAY AF_BLUE_STRINGSET_MAX_LEN: { AF_BLUE_STRING_KHMER_SYMBOLS_WANING_BOTTOM, 0 } { AF_BLUE_STRING_MAX, 0 } - AF_BLUE_STRINGSET_KNDA - { AF_BLUE_STRING_KANNADA_TOP, AF_BLUE_PROPERTY_LATIN_TOP } - { AF_BLUE_STRING_KANNADA_BOTTOM, 0 } - { AF_BLUE_STRING_MAX, 0 } - AF_BLUE_STRINGSET_LAO { AF_BLUE_STRING_LAO_TOP, AF_BLUE_PROPERTY_LATIN_TOP | AF_BLUE_PROPERTY_LATIN_X_HEIGHT } @@ -952,6 +974,17 @@ AF_BLUE_STRINGSET_ENUM AF_BLUE_STRINGSETS_ARRAY AF_BLUE_STRINGSET_MAX_LEN: { AF_BLUE_STRING_MALAYALAM_BOTTOM, 0 } { AF_BLUE_STRING_MAX, 0 } + AF_BLUE_STRINGSET_MEDF + { AF_BLUE_STRING_MEDEFAIDRIN_CAPITAL_TOP, AF_BLUE_PROPERTY_LATIN_TOP } + { AF_BLUE_STRING_MEDEFAIDRIN_CAPITAL_BOTTOM, 0 } + { AF_BLUE_STRING_MEDEFAIDRIN_SMALL_F_TOP, AF_BLUE_PROPERTY_LATIN_TOP } + { AF_BLUE_STRING_MEDEFAIDRIN_SMALL_TOP, AF_BLUE_PROPERTY_LATIN_TOP | + AF_BLUE_PROPERTY_LATIN_X_HEIGHT } + { AF_BLUE_STRING_MEDEFAIDRIN_SMALL_BOTTOM, 0 } + { AF_BLUE_STRING_MEDEFAIDRIN_SMALL_DESCENDER, 0 } + { AF_BLUE_STRING_MEDEFAIDRIN_DIGIT_TOP, AF_BLUE_PROPERTY_LATIN_TOP } + { AF_BLUE_STRING_MAX, 0 } + AF_BLUE_STRINGSET_MONG { AF_BLUE_STRING_MONGOLIAN_TOP_BASE, AF_BLUE_PROPERTY_LATIN_TOP } { AF_BLUE_STRING_MONGOLIAN_BOTTOM_BASE, 0 } @@ -1002,6 +1035,12 @@ AF_BLUE_STRINGSET_ENUM AF_BLUE_STRINGSETS_ARRAY AF_BLUE_STRINGSET_MAX_LEN: { AF_BLUE_STRING_OSMANYA_BOTTOM, 0 } { AF_BLUE_STRING_MAX, 0 } + AF_BLUE_STRINGSET_ROHG + { AF_BLUE_STRING_ROHINGYA_TOP, AF_BLUE_PROPERTY_LATIN_TOP } + { AF_BLUE_STRING_ROHINGYA_BOTTOM, 0 } + { AF_BLUE_STRING_ROHINGYA_JOIN, AF_BLUE_PROPERTY_LATIN_NEUTRAL } + { AF_BLUE_STRING_MAX, 0 } + AF_BLUE_STRINGSET_SAUR { AF_BLUE_STRING_SAURASHTRA_TOP, AF_BLUE_PROPERTY_LATIN_TOP } { AF_BLUE_STRING_SAURASHTRA_BOTTOM, 0 } @@ -1043,11 +1082,6 @@ AF_BLUE_STRINGSET_ENUM AF_BLUE_STRINGSETS_ARRAY AF_BLUE_STRINGSET_MAX_LEN: { AF_BLUE_STRING_TELUGU_BOTTOM, 0 } { AF_BLUE_STRING_MAX, 0 } - AF_BLUE_STRINGSET_TFNG - { AF_BLUE_STRING_TIFINAGH, AF_BLUE_PROPERTY_LATIN_TOP } - { AF_BLUE_STRING_TIFINAGH, 0 } - { AF_BLUE_STRING_MAX, 0 } - AF_BLUE_STRINGSET_THAI { AF_BLUE_STRING_THAI_TOP, AF_BLUE_PROPERTY_LATIN_TOP | AF_BLUE_PROPERTY_LATIN_X_HEIGHT } @@ -1059,6 +1093,11 @@ AF_BLUE_STRINGSET_ENUM AF_BLUE_STRINGSETS_ARRAY AF_BLUE_STRINGSET_MAX_LEN: { AF_BLUE_STRING_THAI_DIGIT_TOP, 0 } { AF_BLUE_STRING_MAX, 0 } + AF_BLUE_STRINGSET_TFNG + { AF_BLUE_STRING_TIFINAGH, AF_BLUE_PROPERTY_LATIN_TOP } + { AF_BLUE_STRING_TIFINAGH, 0 } + { AF_BLUE_STRING_MAX, 0 } + AF_BLUE_STRINGSET_VAII { AF_BLUE_STRING_VAI_TOP, AF_BLUE_PROPERTY_LATIN_TOP } { AF_BLUE_STRING_VAI_BOTTOM, 0 } diff --git a/src/3rdparty/freetype/src/autofit/afblue.h b/src/3rdparty/freetype/src/autofit/afblue.h index b69b1df521..76f2f47cb0 100644 --- a/src/3rdparty/freetype/src/autofit/afblue.h +++ b/src/3rdparty/freetype/src/autofit/afblue.h @@ -7,7 +7,7 @@ * * Auto-fitter data for blue strings (specification). * - * Copyright (C) 2013-2019 by + * Copyright (C) 2013-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -212,58 +212,68 @@ FT_BEGIN_HEADER AF_BLUE_STRING_LISU_BOTTOM = 3506, AF_BLUE_STRING_MALAYALAM_TOP = 3538, AF_BLUE_STRING_MALAYALAM_BOTTOM = 3582, - AF_BLUE_STRING_MONGOLIAN_TOP_BASE = 3614, - AF_BLUE_STRING_MONGOLIAN_BOTTOM_BASE = 3658, - AF_BLUE_STRING_MYANMAR_TOP = 3662, - AF_BLUE_STRING_MYANMAR_BOTTOM = 3694, - AF_BLUE_STRING_MYANMAR_ASCENDER = 3726, - AF_BLUE_STRING_MYANMAR_DESCENDER = 3754, - AF_BLUE_STRING_NKO_TOP = 3786, - AF_BLUE_STRING_NKO_BOTTOM = 3810, - AF_BLUE_STRING_NKO_SMALL_TOP = 3825, - AF_BLUE_STRING_NKO_SMALL_BOTTOM = 3834, - AF_BLUE_STRING_OL_CHIKI = 3846, - AF_BLUE_STRING_OLD_TURKIC_TOP = 3870, - AF_BLUE_STRING_OLD_TURKIC_BOTTOM = 3885, - AF_BLUE_STRING_OSAGE_CAPITAL_TOP = 3905, - AF_BLUE_STRING_OSAGE_CAPITAL_BOTTOM = 3945, - AF_BLUE_STRING_OSAGE_CAPITAL_DESCENDER = 3975, - AF_BLUE_STRING_OSAGE_SMALL_TOP = 3990, - AF_BLUE_STRING_OSAGE_SMALL_BOTTOM = 4030, - AF_BLUE_STRING_OSAGE_SMALL_ASCENDER = 4070, - AF_BLUE_STRING_OSAGE_SMALL_DESCENDER = 4095, - AF_BLUE_STRING_OSMANYA_TOP = 4110, - AF_BLUE_STRING_OSMANYA_BOTTOM = 4150, - AF_BLUE_STRING_SAURASHTRA_TOP = 4190, - AF_BLUE_STRING_SAURASHTRA_BOTTOM = 4222, - AF_BLUE_STRING_SHAVIAN_TOP = 4242, - AF_BLUE_STRING_SHAVIAN_BOTTOM = 4252, - AF_BLUE_STRING_SHAVIAN_DESCENDER = 4277, - AF_BLUE_STRING_SHAVIAN_SMALL_TOP = 4287, - AF_BLUE_STRING_SHAVIAN_SMALL_BOTTOM = 4322, - AF_BLUE_STRING_SINHALA_TOP = 4337, - AF_BLUE_STRING_SINHALA_BOTTOM = 4369, - AF_BLUE_STRING_SINHALA_DESCENDER = 4401, - AF_BLUE_STRING_SUNDANESE_TOP = 4445, - AF_BLUE_STRING_SUNDANESE_BOTTOM = 4469, - AF_BLUE_STRING_SUNDANESE_DESCENDER = 4501, - AF_BLUE_STRING_TAI_VIET_TOP = 4509, - AF_BLUE_STRING_TAI_VIET_BOTTOM = 4529, - AF_BLUE_STRING_TAMIL_TOP = 4541, - AF_BLUE_STRING_TAMIL_BOTTOM = 4573, - AF_BLUE_STRING_TELUGU_TOP = 4605, - AF_BLUE_STRING_TELUGU_BOTTOM = 4633, - AF_BLUE_STRING_THAI_TOP = 4661, - AF_BLUE_STRING_THAI_BOTTOM = 4685, - AF_BLUE_STRING_THAI_ASCENDER = 4713, - AF_BLUE_STRING_THAI_LARGE_ASCENDER = 4725, - AF_BLUE_STRING_THAI_DESCENDER = 4737, - AF_BLUE_STRING_THAI_LARGE_DESCENDER = 4753, - AF_BLUE_STRING_THAI_DIGIT_TOP = 4761, - AF_BLUE_STRING_TIFINAGH = 4773, - AF_BLUE_STRING_VAI_TOP = 4805, - AF_BLUE_STRING_VAI_BOTTOM = 4837, - af_blue_1_1 = 4868, + AF_BLUE_STRING_MEDEFAIDRIN_CAPITAL_TOP = 3614, + AF_BLUE_STRING_MEDEFAIDRIN_CAPITAL_BOTTOM = 3649, + AF_BLUE_STRING_MEDEFAIDRIN_SMALL_F_TOP = 3689, + AF_BLUE_STRING_MEDEFAIDRIN_SMALL_TOP = 3719, + AF_BLUE_STRING_MEDEFAIDRIN_SMALL_BOTTOM = 3749, + AF_BLUE_STRING_MEDEFAIDRIN_SMALL_DESCENDER = 3779, + AF_BLUE_STRING_MEDEFAIDRIN_DIGIT_TOP = 3794, + AF_BLUE_STRING_MONGOLIAN_TOP_BASE = 3819, + AF_BLUE_STRING_MONGOLIAN_BOTTOM_BASE = 3863, + AF_BLUE_STRING_MYANMAR_TOP = 3867, + AF_BLUE_STRING_MYANMAR_BOTTOM = 3899, + AF_BLUE_STRING_MYANMAR_ASCENDER = 3931, + AF_BLUE_STRING_MYANMAR_DESCENDER = 3959, + AF_BLUE_STRING_NKO_TOP = 3991, + AF_BLUE_STRING_NKO_BOTTOM = 4015, + AF_BLUE_STRING_NKO_SMALL_TOP = 4030, + AF_BLUE_STRING_NKO_SMALL_BOTTOM = 4039, + AF_BLUE_STRING_OL_CHIKI = 4051, + AF_BLUE_STRING_OLD_TURKIC_TOP = 4075, + AF_BLUE_STRING_OLD_TURKIC_BOTTOM = 4090, + AF_BLUE_STRING_OSAGE_CAPITAL_TOP = 4110, + AF_BLUE_STRING_OSAGE_CAPITAL_BOTTOM = 4150, + AF_BLUE_STRING_OSAGE_CAPITAL_DESCENDER = 4180, + AF_BLUE_STRING_OSAGE_SMALL_TOP = 4195, + AF_BLUE_STRING_OSAGE_SMALL_BOTTOM = 4235, + AF_BLUE_STRING_OSAGE_SMALL_ASCENDER = 4275, + AF_BLUE_STRING_OSAGE_SMALL_DESCENDER = 4300, + AF_BLUE_STRING_OSMANYA_TOP = 4315, + AF_BLUE_STRING_OSMANYA_BOTTOM = 4355, + AF_BLUE_STRING_ROHINGYA_TOP = 4395, + AF_BLUE_STRING_ROHINGYA_BOTTOM = 4420, + AF_BLUE_STRING_ROHINGYA_JOIN = 4445, + AF_BLUE_STRING_SAURASHTRA_TOP = 4448, + AF_BLUE_STRING_SAURASHTRA_BOTTOM = 4480, + AF_BLUE_STRING_SHAVIAN_TOP = 4500, + AF_BLUE_STRING_SHAVIAN_BOTTOM = 4510, + AF_BLUE_STRING_SHAVIAN_DESCENDER = 4535, + AF_BLUE_STRING_SHAVIAN_SMALL_TOP = 4545, + AF_BLUE_STRING_SHAVIAN_SMALL_BOTTOM = 4580, + AF_BLUE_STRING_SINHALA_TOP = 4595, + AF_BLUE_STRING_SINHALA_BOTTOM = 4627, + AF_BLUE_STRING_SINHALA_DESCENDER = 4659, + AF_BLUE_STRING_SUNDANESE_TOP = 4703, + AF_BLUE_STRING_SUNDANESE_BOTTOM = 4727, + AF_BLUE_STRING_SUNDANESE_DESCENDER = 4759, + AF_BLUE_STRING_TAI_VIET_TOP = 4767, + AF_BLUE_STRING_TAI_VIET_BOTTOM = 4787, + AF_BLUE_STRING_TAMIL_TOP = 4799, + AF_BLUE_STRING_TAMIL_BOTTOM = 4831, + AF_BLUE_STRING_TELUGU_TOP = 4863, + AF_BLUE_STRING_TELUGU_BOTTOM = 4891, + AF_BLUE_STRING_THAI_TOP = 4919, + AF_BLUE_STRING_THAI_BOTTOM = 4943, + AF_BLUE_STRING_THAI_ASCENDER = 4971, + AF_BLUE_STRING_THAI_LARGE_ASCENDER = 4983, + AF_BLUE_STRING_THAI_DESCENDER = 4995, + AF_BLUE_STRING_THAI_LARGE_DESCENDER = 5011, + AF_BLUE_STRING_THAI_DIGIT_TOP = 5019, + AF_BLUE_STRING_TIFINAGH = 5031, + AF_BLUE_STRING_VAI_TOP = 5063, + AF_BLUE_STRING_VAI_BOTTOM = 5095, + af_blue_1_1 = 5126, #ifdef AF_CONFIG_OPTION_CJK AF_BLUE_STRING_CJK_TOP = af_blue_1_1 + 1, AF_BLUE_STRING_CJK_BOTTOM = af_blue_1_1 + 203, @@ -347,35 +357,37 @@ FT_BEGIN_HEADER AF_BLUE_STRINGSET_GUJR = 112, AF_BLUE_STRINGSET_GURU = 118, AF_BLUE_STRINGSET_HEBR = 124, - AF_BLUE_STRINGSET_KALI = 128, - AF_BLUE_STRINGSET_KHMR = 134, - AF_BLUE_STRINGSET_KHMS = 140, - AF_BLUE_STRINGSET_KNDA = 143, + AF_BLUE_STRINGSET_KNDA = 128, + AF_BLUE_STRINGSET_KALI = 131, + AF_BLUE_STRINGSET_KHMR = 137, + AF_BLUE_STRINGSET_KHMS = 143, AF_BLUE_STRINGSET_LAO = 146, AF_BLUE_STRINGSET_LATN = 152, AF_BLUE_STRINGSET_LATB = 159, AF_BLUE_STRINGSET_LATP = 166, AF_BLUE_STRINGSET_LISU = 173, AF_BLUE_STRINGSET_MLYM = 176, - AF_BLUE_STRINGSET_MONG = 179, - AF_BLUE_STRINGSET_MYMR = 182, - AF_BLUE_STRINGSET_NKOO = 187, - AF_BLUE_STRINGSET_NONE = 192, - AF_BLUE_STRINGSET_OLCK = 193, - AF_BLUE_STRINGSET_ORKH = 196, - AF_BLUE_STRINGSET_OSGE = 199, - AF_BLUE_STRINGSET_OSMA = 207, - AF_BLUE_STRINGSET_SAUR = 210, - AF_BLUE_STRINGSET_SHAW = 213, - AF_BLUE_STRINGSET_SINH = 219, - AF_BLUE_STRINGSET_SUND = 223, - AF_BLUE_STRINGSET_TAML = 227, - AF_BLUE_STRINGSET_TAVT = 230, - AF_BLUE_STRINGSET_TELU = 233, - AF_BLUE_STRINGSET_TFNG = 236, - AF_BLUE_STRINGSET_THAI = 239, - AF_BLUE_STRINGSET_VAII = 247, - af_blue_2_1 = 250, + AF_BLUE_STRINGSET_MEDF = 179, + AF_BLUE_STRINGSET_MONG = 187, + AF_BLUE_STRINGSET_MYMR = 190, + AF_BLUE_STRINGSET_NKOO = 195, + AF_BLUE_STRINGSET_NONE = 200, + AF_BLUE_STRINGSET_OLCK = 201, + AF_BLUE_STRINGSET_ORKH = 204, + AF_BLUE_STRINGSET_OSGE = 207, + AF_BLUE_STRINGSET_OSMA = 215, + AF_BLUE_STRINGSET_ROHG = 218, + AF_BLUE_STRINGSET_SAUR = 222, + AF_BLUE_STRINGSET_SHAW = 225, + AF_BLUE_STRINGSET_SINH = 231, + AF_BLUE_STRINGSET_SUND = 235, + AF_BLUE_STRINGSET_TAML = 239, + AF_BLUE_STRINGSET_TAVT = 242, + AF_BLUE_STRINGSET_TELU = 245, + AF_BLUE_STRINGSET_THAI = 248, + AF_BLUE_STRINGSET_TFNG = 256, + AF_BLUE_STRINGSET_VAII = 259, + af_blue_2_1 = 262, #ifdef AF_CONFIG_OPTION_CJK AF_BLUE_STRINGSET_HANI = af_blue_2_1 + 0, af_blue_2_1_1 = af_blue_2_1 + 2, diff --git a/src/3rdparty/freetype/src/autofit/afblue.hin b/src/3rdparty/freetype/src/autofit/afblue.hin index 30a28dafa5..6a31298e65 100644 --- a/src/3rdparty/freetype/src/autofit/afblue.hin +++ b/src/3rdparty/freetype/src/autofit/afblue.hin @@ -4,7 +4,7 @@ * * Auto-fitter data for blue strings (specification). * - * Copyright (C) 2013-2019 by + * Copyright (C) 2013-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, diff --git a/src/3rdparty/freetype/src/autofit/afcjk.c b/src/3rdparty/freetype/src/autofit/afcjk.c index a61689bee3..f414289adc 100644 --- a/src/3rdparty/freetype/src/autofit/afcjk.c +++ b/src/3rdparty/freetype/src/autofit/afcjk.c @@ -4,7 +4,7 @@ * * Auto-fitter hinting routines for CJK writing system (body). * - * Copyright (C) 2006-2019 by + * Copyright (C) 2006-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -22,9 +22,8 @@ * */ -#include <ft2build.h> -#include FT_ADVANCES_H -#include FT_INTERNAL_DEBUG_H +#include <freetype/ftadvanc.h> +#include <freetype/internal/ftdebug.h> #include "afglobal.h" #include "aflatin.h" @@ -38,11 +37,6 @@ #include "aferrors.h" -#ifdef AF_CONFIG_OPTION_USE_WARPER -#include "afwarp.h" -#endif - - /************************************************************************** * * The macro FT_COMPONENT is used in trace mode. It is an implicit @@ -73,11 +67,11 @@ AF_GlyphHintsRec hints[1]; - FT_TRACE5(( "\n" - "cjk standard widths computation (style `%s')\n" - "===================================================\n" - "\n", + FT_TRACE5(( "\n" )); + FT_TRACE5(( "cjk standard widths computation (style `%s')\n", af_style_names[metrics->root.style_class->style] )); + FT_TRACE5(( "===================================================\n" )); + FT_TRACE5(( "\n" )); af_glyph_hints_init( hints, face->memory ); @@ -158,7 +152,7 @@ if ( !glyph_index ) goto Exit; - FT_TRACE5(( "standard character: U+%04lX (glyph index %d)\n", + FT_TRACE5(( "standard character: U+%04lX (glyph index %ld)\n", ch, glyph_index )); error = FT_Load_Glyph( face, glyph_index, FT_LOAD_NO_SCALE ); @@ -261,9 +255,9 @@ dim == AF_DIMENSION_VERT ? "horizontal" : "vertical" )); - FT_TRACE5(( " %d (standard)", axis->standard_width )); + FT_TRACE5(( " %ld (standard)", axis->standard_width )); for ( i = 1; i < axis->width_count; i++ ) - FT_TRACE5(( " %d", axis->widths[i].org )); + FT_TRACE5(( " %ld", axis->widths[i].org )); FT_TRACE5(( "\n" )); } @@ -315,9 +309,9 @@ /* style's entry in the `af_blue_stringset' array, computing its */ /* extremum points (depending on the string properties) */ - FT_TRACE5(( "cjk blue zones computation\n" - "==========================\n" - "\n" )); + FT_TRACE5(( "cjk blue zones computation\n" )); + FT_TRACE5(( "==========================\n" )); + FT_TRACE5(( "\n" )); #ifdef FT_CONFIG_OPTION_USE_HARFBUZZ shaper_buf = af_shaper_buf_create( face ); @@ -423,16 +417,14 @@ { FT_Int nn; - FT_Int first = 0; - FT_Int last = -1; + FT_Int pp, first, last; - for ( nn = 0; nn < outline.n_contours; first = last + 1, nn++ ) + last = -1; + for ( nn = 0; nn < outline.n_contours; nn++ ) { - FT_Int pp; - - - last = outline.contours[nn]; + first = last + 1; + last = outline.contours[nn]; /* Avoid single-point contours since they are never rasterized. */ /* In some fonts, they correspond to mark attachment points */ @@ -556,9 +548,8 @@ if ( AF_CJK_IS_TOP_BLUE( bs ) ) blue->flags |= AF_CJK_BLUE_TOP; - FT_TRACE5(( " -> reference = %ld\n" - " overshoot = %ld\n", - *blue_ref, *blue_shoot )); + FT_TRACE5(( " -> reference = %ld\n", *blue_ref )); + FT_TRACE5(( " overshoot = %ld\n", *blue_shoot )); } /* end for loop */ @@ -576,8 +567,8 @@ af_cjk_metrics_check_digits( AF_CJKMetrics metrics, FT_Face face ) { - FT_Bool started = 0, same_width = 1; - FT_Fixed advance = 0, old_advance = 0; + FT_Bool started = 0, same_width = 1; + FT_Long advance = 0, old_advance = 0; /* If HarfBuzz is not available, we need a pointer to a single */ /* unsigned long value. */ @@ -642,10 +633,11 @@ /* Initialize global metrics. */ FT_LOCAL_DEF( FT_Error ) - af_cjk_metrics_init( AF_CJKMetrics metrics, - FT_Face face ) + af_cjk_metrics_init( AF_StyleMetrics metrics_, /* AF_CJKMetrics */ + FT_Face face ) { - FT_CharMap oldmap = face->charmap; + AF_CJKMetrics metrics = (AF_CJKMetrics)metrics_; + FT_CharMap oldmap = face->charmap; metrics->units_per_em = face->units_per_EM; @@ -657,7 +649,7 @@ af_cjk_metrics_check_digits( metrics, face ); } - FT_Set_Charmap( face, oldmap ); + face->charmap = oldmap; return FT_Err_Ok; } @@ -728,7 +720,7 @@ delta2 = FT_MulFix( delta2, scale ); - FT_TRACE5(( "delta: %d", delta1 )); + FT_TRACE5(( "delta: %ld", delta1 )); if ( delta2 < 32 ) delta2 = 0; #if 0 @@ -737,20 +729,22 @@ #endif else delta2 = FT_PIX_ROUND( delta2 ); - FT_TRACE5(( "/%d\n", delta2 )); + FT_TRACE5(( "/%ld\n", delta2 )); if ( delta1 < 0 ) delta2 = -delta2; blue->shoot.fit = blue->ref.fit - delta2; - FT_TRACE5(( ">> active cjk blue zone %c%d[%ld/%ld]:\n" - " ref: cur=%.2f fit=%.2f\n" - " shoot: cur=%.2f fit=%.2f\n", + FT_TRACE5(( ">> active cjk blue zone %c%d[%ld/%ld]:\n", ( dim == AF_DIMENSION_HORZ ) ? 'H' : 'V', - nn, blue->ref.org, blue->shoot.org, - blue->ref.cur / 64.0, blue->ref.fit / 64.0, - blue->shoot.cur / 64.0, blue->shoot.fit / 64.0 )); + nn, blue->ref.org, blue->shoot.org )); + FT_TRACE5(( " ref: cur=%.2f fit=%.2f\n", + (double)blue->ref.cur / 64, + (double)blue->ref.fit / 64 )); + FT_TRACE5(( " shoot: cur=%.2f fit=%.2f\n", + (double)blue->shoot.cur / 64, + (double)blue->shoot.fit / 64 )); blue->flags |= AF_CJK_BLUE_ACTIVE; } @@ -761,9 +755,12 @@ /* Scale global values in both directions. */ FT_LOCAL_DEF( void ) - af_cjk_metrics_scale( AF_CJKMetrics metrics, - AF_Scaler scaler ) + af_cjk_metrics_scale( AF_StyleMetrics metrics_, /* AF_CJKMetrics */ + AF_Scaler scaler ) { + AF_CJKMetrics metrics = (AF_CJKMetrics)metrics_; + + /* we copy the whole structure since the x and y scaling values */ /* are not modified, contrary to e.g. the `latin' auto-hinter */ metrics->root.scaler = *scaler; @@ -776,11 +773,14 @@ /* Extract standard_width from writing system/script specific */ /* metrics class. */ - FT_LOCAL_DEF( void ) - af_cjk_get_standard_widths( AF_CJKMetrics metrics, - FT_Pos* stdHW, - FT_Pos* stdVW ) + FT_CALLBACK_DEF( void ) + af_cjk_get_standard_widths( AF_StyleMetrics metrics_, /* AF_CJKMetrics */ + FT_Pos* stdHW, + FT_Pos* stdVW ) { + AF_CJKMetrics metrics = (AF_CJKMetrics)metrics_; + + if ( stdHW ) *stdHW = metrics->axis[AF_DIMENSION_VERT].standard_width; @@ -806,7 +806,7 @@ { AF_AxisHints axis = &hints->axis[dim]; AF_Segment segments = axis->segments; - AF_Segment segment_limit = segments + axis->num_segments; + AF_Segment segment_limit = FT_OFFSET( segments, axis->num_segments ); FT_Error error; AF_Segment seg; @@ -850,7 +850,7 @@ { AF_AxisHints axis = &hints->axis[dim]; AF_Segment segments = axis->segments; - AF_Segment segment_limit = segments + axis->num_segments; + AF_Segment segment_limit = FT_OFFSET( segments, axis->num_segments ); AF_Direction major_dir = axis->major_dir; AF_Segment seg1, seg2; FT_Pos len_threshold; @@ -1012,7 +1012,7 @@ AF_CJKAxis laxis = &((AF_CJKMetrics)hints->metrics)->axis[dim]; AF_Segment segments = axis->segments; - AF_Segment segment_limit = segments + axis->num_segments; + AF_Segment segment_limit = FT_OFFSET( segments, axis->num_segments ); AF_Segment seg; FT_Fixed scale; @@ -1051,7 +1051,7 @@ { AF_Edge found = NULL; FT_Pos best = 0xFFFFU; - FT_Int ee; + FT_UInt ee; /* look for an edge corresponding to the segment */ @@ -1160,7 +1160,7 @@ */ { AF_Edge edges = axis->edges; - AF_Edge edge_limit = edges + axis->num_edges; + AF_Edge edge_limit = FT_OFFSET( edges, axis->num_edges ); AF_Edge edge; @@ -1298,7 +1298,7 @@ { AF_AxisHints axis = &hints->axis[dim]; AF_Edge edge = axis->edges; - AF_Edge edge_limit = edge + axis->num_edges; + AF_Edge edge_limit = FT_OFFSET( edge, axis->num_edges ); AF_CJKAxis cjk = &metrics->axis[dim]; FT_Fixed scale = cjk->scale; FT_Pos best_dist0; /* initial threshold */ @@ -1381,9 +1381,10 @@ /* Initalize hinting engine. */ FT_LOCAL_DEF( FT_Error ) - af_cjk_hints_init( AF_GlyphHints hints, - AF_CJKMetrics metrics ) + af_cjk_hints_init( AF_GlyphHints hints, + AF_StyleMetrics metrics_ ) /* AF_CJKMetrics */ { + AF_CJKMetrics metrics = (AF_CJKMetrics)metrics_; FT_Render_Mode mode; FT_UInt32 scaler_flags, other_flags; @@ -1402,11 +1403,6 @@ /* compute flags depending on render mode, etc. */ mode = metrics->root.scaler.render_mode; -#if 0 /* AF_CONFIG_OPTION_USE_WARPER */ - if ( mode == FT_RENDER_MODE_LCD || mode == FT_RENDER_MODE_LCD_V ) - metrics->root.scaler.render_mode = mode = FT_RENDER_MODE_NORMAL; -#endif - scaler_flags = hints->scaler_flags; other_flags = 0; @@ -1435,12 +1431,6 @@ scaler_flags |= AF_SCALER_FLAG_NO_ADVANCE; -#ifdef AF_CONFIG_OPTION_USE_WARPER - /* get (global) warper flag */ - if ( !metrics->root.globals->module->warping ) - scaler_flags |= AF_SCALER_FLAG_NO_WARPER; -#endif - hints->scaler_flags = scaler_flags; hints->other_flags = other_flags; @@ -1644,11 +1634,13 @@ stem_edge->pos = base_edge->pos + fitted_width; - FT_TRACE5(( " CJKLINK: edge %d @%d (opos=%.2f) linked to %.2f," + FT_TRACE5(( " CJKLINK: edge %td @%d (opos=%.2f) linked to %.2f," " dist was %.2f, now %.2f\n", stem_edge - hints->axis[dim].edges, stem_edge->fpos, - stem_edge->opos / 64.0, stem_edge->pos / 64.0, - dist / 64.0, fitted_width / 64.0 )); + (double)stem_edge->opos / 64, + (double)stem_edge->pos / 64, + (double)dist / 64, + (double)fitted_width / 64 )); } @@ -1816,7 +1808,7 @@ { AF_AxisHints axis = &hints->axis[dim]; AF_Edge edges = axis->edges; - AF_Edge edge_limit = edges + axis->num_edges; + AF_Edge edge_limit = FT_OFFSET( edges, axis->num_edges ); FT_PtrDist n_edges; AF_Edge edge; AF_Edge anchor = NULL; @@ -1866,10 +1858,10 @@ continue; #ifdef FT_DEBUG_LEVEL_TRACE - FT_TRACE5(( " CJKBLUE: edge %d @%d (opos=%.2f) snapped to %.2f," + FT_TRACE5(( " CJKBLUE: edge %td @%d (opos=%.2f) snapped to %.2f," " was %.2f\n", - edge1 - edges, edge1->fpos, edge1->opos / 64.0, - blue->fit / 64.0, edge1->pos / 64.0 )); + edge1 - edges, edge1->fpos, (double)edge1->opos / 64, + (double)blue->fit / 64, (double)edge1->pos / 64 )); num_actions++; #endif @@ -1930,7 +1922,7 @@ /* this should not happen, but it's better to be safe */ if ( edge2->blue_edge ) { - FT_TRACE5(( "ASSERTION FAILED for edge %d\n", edge2-edges )); + FT_TRACE5(( "ASSERTION FAILED for edge %td\n", edge2 - edges )); af_cjk_align_linked_edge( hints, dim, edge2, edge ); edge->flags |= AF_EDGE_DONE; @@ -2042,8 +2034,8 @@ #if 0 printf( "stem (%d,%d) adjusted (%.1f,%.1f)\n", edge - edges, edge2 - edges, - ( edge->pos - edge->opos ) / 64.0, - ( edge2->pos - edge2->opos ) / 64.0 ); + (double)( edge->pos - edge->opos ) / 64, + (double)( edge2->pos - edge2->opos ) / 64 ); #endif anchor = edge; @@ -2195,7 +2187,7 @@ { AF_AxisHints axis = & hints->axis[dim]; AF_Edge edges = axis->edges; - AF_Edge edge_limit = edges + axis->num_edges; + AF_Edge edge_limit = FT_OFFSET( edges, axis->num_edges ); AF_Edge edge; FT_Bool snapping; @@ -2282,11 +2274,13 @@ /* Apply the complete hinting algorithm to a CJK glyph. */ FT_LOCAL_DEF( FT_Error ) - af_cjk_hints_apply( FT_UInt glyph_index, - AF_GlyphHints hints, - FT_Outline* outline, - AF_CJKMetrics metrics ) + af_cjk_hints_apply( FT_UInt glyph_index, + AF_GlyphHints hints, + FT_Outline* outline, + AF_StyleMetrics metrics_ ) /* AF_CJKMetrics */ { + AF_CJKMetrics metrics = (AF_CJKMetrics)metrics_; + FT_Error error; int dim; @@ -2323,25 +2317,6 @@ if ( ( dim == AF_DIMENSION_HORZ && AF_HINTS_DO_HORIZONTAL( hints ) ) || ( dim == AF_DIMENSION_VERT && AF_HINTS_DO_VERTICAL( hints ) ) ) { - -#ifdef AF_CONFIG_OPTION_USE_WARPER - if ( dim == AF_DIMENSION_HORZ && - metrics->root.scaler.render_mode == FT_RENDER_MODE_NORMAL && - AF_HINTS_DO_WARP( hints ) ) - { - AF_WarperRec warper; - FT_Fixed scale; - FT_Pos delta; - - - af_warper_compute( &warper, hints, (AF_Dimension)dim, - &scale, &delta ); - af_glyph_hints_scale_dim( hints, (AF_Dimension)dim, - scale, delta ); - continue; - } -#endif /* AF_CONFIG_OPTION_USE_WARPER */ - af_cjk_hint_edges( hints, (AF_Dimension)dim ); af_cjk_align_edge_points( hints, (AF_Dimension)dim ); af_glyph_hints_align_strong_points( hints, (AF_Dimension)dim ); diff --git a/src/3rdparty/freetype/src/autofit/afcjk.h b/src/3rdparty/freetype/src/autofit/afcjk.h index 59acae5342..f380ef6e03 100644 --- a/src/3rdparty/freetype/src/autofit/afcjk.h +++ b/src/3rdparty/freetype/src/autofit/afcjk.h @@ -4,7 +4,7 @@ * * Auto-fitter hinting routines for CJK writing system (specification). * - * Copyright (C) 2006-2019 by + * Copyright (C) 2006-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -103,22 +103,22 @@ FT_BEGIN_HEADER #ifdef AF_CONFIG_OPTION_CJK FT_LOCAL( FT_Error ) - af_cjk_metrics_init( AF_CJKMetrics metrics, - FT_Face face ); + af_cjk_metrics_init( AF_StyleMetrics metrics, + FT_Face face ); FT_LOCAL( void ) - af_cjk_metrics_scale( AF_CJKMetrics metrics, - AF_Scaler scaler ); + af_cjk_metrics_scale( AF_StyleMetrics metrics, + AF_Scaler scaler ); FT_LOCAL( FT_Error ) - af_cjk_hints_init( AF_GlyphHints hints, - AF_CJKMetrics metrics ); + af_cjk_hints_init( AF_GlyphHints hints, + AF_StyleMetrics metrics ); FT_LOCAL( FT_Error ) - af_cjk_hints_apply( FT_UInt glyph_index, - AF_GlyphHints hints, - FT_Outline* outline, - AF_CJKMetrics metrics ); + af_cjk_hints_apply( FT_UInt glyph_index, + AF_GlyphHints hints, + FT_Outline* outline, + AF_StyleMetrics metrics ); /* shared; called from afindic.c */ FT_LOCAL( void ) diff --git a/src/3rdparty/freetype/src/autofit/afcover.h b/src/3rdparty/freetype/src/autofit/afcover.h index ff207a97e0..102ed42782 100644 --- a/src/3rdparty/freetype/src/autofit/afcover.h +++ b/src/3rdparty/freetype/src/autofit/afcover.h @@ -4,7 +4,7 @@ * * Auto-fitter coverages (specification only). * - * Copyright (C) 2013-2019 by + * Copyright (C) 2013-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, diff --git a/src/3rdparty/freetype/src/autofit/afdummy.c b/src/3rdparty/freetype/src/autofit/afdummy.c index 7e07a41e7d..a4629b528d 100644 --- a/src/3rdparty/freetype/src/autofit/afdummy.c +++ b/src/3rdparty/freetype/src/autofit/afdummy.c @@ -5,7 +5,7 @@ * Auto-fitter dummy routines to be used if no hinting should be * performed (body). * - * Copyright (C) 2003-2019 by + * Copyright (C) 2003-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, diff --git a/src/3rdparty/freetype/src/autofit/afdummy.h b/src/3rdparty/freetype/src/autofit/afdummy.h index ab9227d35d..a7af3f62c9 100644 --- a/src/3rdparty/freetype/src/autofit/afdummy.h +++ b/src/3rdparty/freetype/src/autofit/afdummy.h @@ -5,7 +5,7 @@ * Auto-fitter dummy routines to be used if no hinting should be * performed (specification). * - * Copyright (C) 2003-2019 by + * Copyright (C) 2003-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, diff --git a/src/3rdparty/freetype/src/autofit/aferrors.h b/src/3rdparty/freetype/src/autofit/aferrors.h index 2ec336f72c..88faf05c95 100644 --- a/src/3rdparty/freetype/src/autofit/aferrors.h +++ b/src/3rdparty/freetype/src/autofit/aferrors.h @@ -4,7 +4,7 @@ * * Autofitter error codes (specification only). * - * Copyright (C) 2005-2019 by + * Copyright (C) 2005-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -26,7 +26,7 @@ #ifndef AFERRORS_H_ #define AFERRORS_H_ -#include FT_MODULE_ERRORS_H +#include <freetype/ftmoderr.h> #undef FTERRORS_H_ @@ -34,7 +34,7 @@ #define FT_ERR_PREFIX AF_Err_ #define FT_ERR_BASE FT_Mod_Err_Autofit -#include FT_ERRORS_H +#include <freetype/fterrors.h> #endif /* AFERRORS_H_ */ diff --git a/src/3rdparty/freetype/src/autofit/afglobal.c b/src/3rdparty/freetype/src/autofit/afglobal.c index 6a9a1e5aaa..b1957570f0 100644 --- a/src/3rdparty/freetype/src/autofit/afglobal.c +++ b/src/3rdparty/freetype/src/autofit/afglobal.c @@ -4,7 +4,7 @@ * * Auto-fitter routines to compute global hinting values (body). * - * Copyright (C) 2003-2019 by + * Copyright (C) 2003-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -19,7 +19,8 @@ #include "afglobal.h" #include "afranges.h" #include "afshaper.h" -#include FT_INTERNAL_DEBUG_H +#include "afws-decl.h" +#include <freetype/internal/ftdebug.h> /************************************************************************** @@ -32,11 +33,6 @@ #define FT_COMPONENT afglobal - /* get writing system specific header files */ -#undef WRITING_SYSTEM -#define WRITING_SYSTEM( ws, WS ) /* empty */ -#include "afwrtsys.h" - #include "aferrors.h" @@ -74,7 +70,7 @@ af_writing_system_classes[] = { -#include "afwrtsys.h" +#include "afws-iter.h" NULL /* do not remove */ }; @@ -133,13 +129,13 @@ FT_Face face = globals->face; FT_CharMap old_charmap = face->charmap; FT_UShort* gstyles = globals->glyph_styles; - FT_UInt ss; + FT_UShort ss; + FT_UShort dflt = 0xFFFFU; /* a non-valid value */ FT_UInt i; - FT_UInt dflt = ~0U; /* a non-valid value */ /* the value AF_STYLE_UNASSIGNED means `uncovered glyph' */ - for ( i = 0; i < (FT_UInt)globals->glyph_count; i++ ) + for ( i = 0; i < globals->glyph_count; i++ ) gstyles[i] = AF_STYLE_UNASSIGNED; error = FT_Select_Charmap( face, FT_ENCODING_UNICODE ); @@ -172,8 +168,7 @@ */ if ( style_class->coverage == AF_COVERAGE_DEFAULT ) { - if ( (FT_UInt)style_class->script == - globals->module->default_script ) + if ( style_class->script == globals->module->default_script ) dflt = ss; for ( range = script_class->script_uni_ranges; @@ -187,9 +182,9 @@ gindex = FT_Get_Char_Index( face, charcode ); if ( gindex != 0 && - gindex < (FT_ULong)globals->glyph_count && + gindex < globals->glyph_count && ( gstyles[gindex] & AF_STYLE_MASK ) == AF_STYLE_UNASSIGNED ) - gstyles[gindex] = (FT_UShort)ss; + gstyles[gindex] = ss; for (;;) { @@ -198,9 +193,9 @@ if ( gindex == 0 || charcode > range->last ) break; - if ( gindex < (FT_ULong)globals->glyph_count && + if ( gindex < globals->glyph_count && ( gstyles[gindex] & AF_STYLE_MASK ) == AF_STYLE_UNASSIGNED ) - gstyles[gindex] = (FT_UShort)ss; + gstyles[gindex] = ss; } } @@ -215,9 +210,9 @@ gindex = FT_Get_Char_Index( face, charcode ); - if ( gindex != 0 && - gindex < (FT_ULong)globals->glyph_count && - ( gstyles[gindex] & AF_STYLE_MASK ) == (FT_UShort)ss ) + if ( gindex != 0 && + gindex < globals->glyph_count && + ( gstyles[gindex] & AF_STYLE_MASK ) == ss ) gstyles[gindex] |= AF_NONBASE; for (;;) @@ -227,8 +222,8 @@ if ( gindex == 0 || charcode > range->last ) break; - if ( gindex < (FT_ULong)globals->glyph_count && - ( gstyles[gindex] & AF_STYLE_MASK ) == (FT_UShort)ss ) + if ( gindex < globals->glyph_count && + ( gstyles[gindex] & AF_STYLE_MASK ) == ss ) gstyles[gindex] |= AF_NONBASE; } } @@ -259,7 +254,7 @@ FT_UInt gindex = FT_Get_Char_Index( face, i ); - if ( gindex != 0 && gindex < (FT_ULong)globals->glyph_count ) + if ( gindex != 0 && gindex < globals->glyph_count ) gstyles[gindex] |= AF_DIGIT; } @@ -270,7 +265,7 @@ */ if ( globals->module->fallback_style != AF_STYLE_UNASSIGNED ) { - FT_Long nn; + FT_UInt nn; for ( nn = 0; nn < globals->glyph_count; nn++ ) @@ -285,16 +280,16 @@ #ifdef FT_DEBUG_LEVEL_TRACE - FT_TRACE4(( "\n" - "style coverage\n" - "==============\n" - "\n" )); + FT_TRACE4(( "\n" )); + FT_TRACE4(( "style coverage\n" )); + FT_TRACE4(( "==============\n" )); + FT_TRACE4(( "\n" )); for ( ss = 0; af_style_classes[ss]; ss++ ) { AF_StyleClass style_class = af_style_classes[ss]; FT_UInt count = 0; - FT_Long idx; + FT_UInt idx; FT_TRACE4(( "%s:\n", af_style_names[style_class->style] )); @@ -322,7 +317,7 @@ #endif /* FT_DEBUG_LEVEL_TRACE */ - FT_Set_Charmap( face, old_charmap ); + face->charmap = old_charmap; return error; } @@ -341,13 +336,15 @@ /* we allocate an AF_FaceGlobals structure together */ /* with the glyph_styles array */ - if ( FT_ALLOC( globals, - sizeof ( *globals ) + - (FT_ULong)face->num_glyphs * sizeof ( FT_UShort ) ) ) + if ( FT_QALLOC( globals, + sizeof ( *globals ) + + (FT_ULong)face->num_glyphs * sizeof ( FT_UShort ) ) ) goto Exit; + FT_ZERO( &globals->metrics ); + globals->face = face; - globals->glyph_count = face->num_glyphs; + globals->glyph_count = (FT_UInt)face->num_glyphs; /* right after the globals structure come the glyph styles */ globals->glyph_styles = (FT_UShort*)( globals + 1 ); globals->module = module; @@ -359,7 +356,7 @@ globals->scale_down_factor = 0; #ifdef FT_CONFIG_OPTION_USE_HARFBUZZ - globals->hb_font = hb_ft_font_create( face, NULL ); + globals->hb_font = hb_ft_font_create_( face, NULL ); globals->hb_buf = hb_buffer_create(); #endif @@ -379,8 +376,11 @@ FT_LOCAL_DEF( void ) - af_face_globals_free( AF_FaceGlobals globals ) + af_face_globals_free( void* globals_ ) { + AF_FaceGlobals globals = (AF_FaceGlobals)globals_; + + if ( globals ) { FT_Memory memory = globals->face->memory; @@ -431,7 +431,7 @@ FT_Error error = FT_Err_Ok; - if ( gindex >= (FT_ULong)globals->glyph_count ) + if ( gindex >= globals->glyph_count ) { error = FT_THROW( Invalid_Argument ); goto Exit; @@ -478,6 +478,10 @@ { style = (AF_Style)( globals->glyph_styles[gindex] & AF_STYLE_UNASSIGNED ); + /* IMPORTANT: Clear the error code, see + * https://gitlab.freedesktop.org/freetype/freetype/-/issues/1063 + */ + error = FT_Err_Ok; goto Again; } @@ -499,7 +503,7 @@ af_face_globals_is_digit( AF_FaceGlobals globals, FT_UInt gindex ) { - if ( gindex < (FT_ULong)globals->glyph_count ) + if ( gindex < globals->glyph_count ) return FT_BOOL( globals->glyph_styles[gindex] & AF_DIGIT ); return FT_BOOL( 0 ); diff --git a/src/3rdparty/freetype/src/autofit/afglobal.h b/src/3rdparty/freetype/src/autofit/afglobal.h index 52f38350db..66170e419d 100644 --- a/src/3rdparty/freetype/src/autofit/afglobal.h +++ b/src/3rdparty/freetype/src/autofit/afglobal.h @@ -5,7 +5,7 @@ * Auto-fitter routines to compute global hinting values * (specification). * - * Copyright (C) 2003-2019 by + * Copyright (C) 2003-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -105,7 +105,7 @@ FT_BEGIN_HEADER typedef struct AF_FaceGlobalsRec_ { FT_Face face; - FT_Long glyph_count; /* same as face->num_glyphs */ + FT_UInt glyph_count; /* unsigned face->num_glyphs */ FT_UShort* glyph_styles; #ifdef FT_CONFIG_OPTION_USE_HARFBUZZ @@ -156,9 +156,9 @@ FT_BEGIN_HEADER AF_StyleMetrics *ametrics ); FT_LOCAL( void ) - af_face_globals_free( AF_FaceGlobals globals ); + af_face_globals_free( void* globals ); - FT_LOCAL_DEF( FT_Bool ) + FT_LOCAL( FT_Bool ) af_face_globals_is_digit( AF_FaceGlobals globals, FT_UInt gindex ); diff --git a/src/3rdparty/freetype/src/autofit/afhints.c b/src/3rdparty/freetype/src/autofit/afhints.c index ed111c4117..e4a378fbf7 100644 --- a/src/3rdparty/freetype/src/autofit/afhints.c +++ b/src/3rdparty/freetype/src/autofit/afhints.c @@ -4,7 +4,7 @@ * * Auto-fitter hinting routines (body). * - * Copyright (C) 2003-2019 by + * Copyright (C) 2003-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -18,8 +18,8 @@ #include "afhints.h" #include "aferrors.h" -#include FT_INTERNAL_CALC_H -#include FT_INTERNAL_DEBUG_H +#include <freetype/internal/ftcalc.h> +#include <freetype/internal/ftdebug.h> /************************************************************************** @@ -32,6 +32,104 @@ #define FT_COMPONENT afhints + FT_LOCAL_DEF( void ) + af_sort_pos( FT_UInt count, + FT_Pos* table ) + { + FT_UInt i, j; + FT_Pos swap; + + + for ( i = 1; i < count; i++ ) + { + for ( j = i; j > 0; j-- ) + { + if ( table[j] >= table[j - 1] ) + break; + + swap = table[j]; + table[j] = table[j - 1]; + table[j - 1] = swap; + } + } + } + + + FT_LOCAL_DEF( void ) + af_sort_and_quantize_widths( FT_UInt* count, + AF_Width table, + FT_Pos threshold ) + { + FT_UInt i, j; + FT_UInt cur_idx; + FT_Pos cur_val; + FT_Pos sum; + AF_WidthRec swap; + + + if ( *count == 1 ) + return; + + /* sort */ + for ( i = 1; i < *count; i++ ) + { + for ( j = i; j > 0; j-- ) + { + if ( table[j].org >= table[j - 1].org ) + break; + + swap = table[j]; + table[j] = table[j - 1]; + table[j - 1] = swap; + } + } + + cur_idx = 0; + cur_val = table[cur_idx].org; + + /* compute and use mean values for clusters not larger than */ + /* `threshold'; this is very primitive and might not yield */ + /* the best result, but normally, using reference character */ + /* `o', `*count' is 2, so the code below is fully sufficient */ + for ( i = 1; i < *count; i++ ) + { + if ( table[i].org - cur_val > threshold || + i == *count - 1 ) + { + sum = 0; + + /* fix loop for end of array */ + if ( table[i].org - cur_val <= threshold && + i == *count - 1 ) + i++; + + for ( j = cur_idx; j < i; j++ ) + { + sum += table[j].org; + table[j].org = 0; + } + table[cur_idx].org = sum / (FT_Pos)j; + + if ( i < *count - 1 ) + { + cur_idx = i + 1; + cur_val = table[cur_idx].org; + } + } + } + + cur_idx = 1; + + /* compress array to remove zero values */ + for ( i = 1; i < *count; i++ ) + { + if ( table[i].org ) + table[cur_idx++] = table[i]; + } + + *count = cur_idx; + } + /* Get new segment for given axis. */ FT_LOCAL_DEF( FT_Error ) @@ -53,9 +151,9 @@ } else if ( axis->num_segments >= axis->max_segments ) { - FT_Int old_max = axis->max_segments; - FT_Int new_max = old_max; - FT_Int big_max = (FT_Int)( FT_INT_MAX / sizeof ( *segment ) ); + FT_UInt old_max = axis->max_segments; + FT_UInt new_max = old_max; + FT_UInt big_max = FT_INT_MAX / sizeof ( *segment ); if ( old_max >= big_max ) @@ -95,7 +193,7 @@ /* Get new edge for given axis, direction, and position, */ /* without initializing the edge itself. */ - FT_LOCAL( FT_Error ) + FT_LOCAL_DEF( FT_Error ) af_axis_hints_new_edge( AF_AxisHints axis, FT_Int fpos, AF_Direction dir, @@ -118,9 +216,9 @@ } else if ( axis->num_edges >= axis->max_edges ) { - FT_Int old_max = axis->max_edges; - FT_Int new_max = old_max; - FT_Int big_max = (FT_Int)( FT_INT_MAX / sizeof ( *edge ) ); + FT_UInt old_max = axis->max_edges; + FT_UInt new_max = old_max; + FT_UInt big_max = FT_INT_MAX / sizeof ( *edge ); if ( old_max >= big_max ) @@ -222,8 +320,9 @@ static char* - af_print_idx( char* p, - int idx ) + af_print_idx( char* p, + size_t n, + int idx ) { if ( idx == -1 ) { @@ -232,7 +331,7 @@ p[2] = '\0'; } else - ft_sprintf( p, "%d", idx ); + ft_snprintf( p, n, "%d", idx ); return p; } @@ -359,12 +458,12 @@ " %5d %5d %7.2f %7.2f %7.2f %7.2f" " %5s %5s %5s %5s\n", point_idx, - af_print_idx( buf1, + af_print_idx( buf1, 16, af_get_edge_index( hints, segment_idx_1, 1 ) ), - af_print_idx( buf2, segment_idx_1 ), - af_print_idx( buf3, + af_print_idx( buf2, 16, segment_idx_1 ), + af_print_idx( buf3, 16, af_get_edge_index( hints, segment_idx_0, 0 ) ), - af_print_idx( buf4, segment_idx_0 ), + af_print_idx( buf4, 16, segment_idx_0 ), ( point->flags & AF_FLAG_NEAR ) ? " near " : ( point->flags & AF_FLAG_WEAK_INTERPOLATION ) @@ -373,23 +472,27 @@ point->fx, point->fy, - point->ox / 64.0, - point->oy / 64.0, - point->x / 64.0, - point->y / 64.0, - - af_print_idx( buf5, af_get_strong_edge_index( hints, - point->before, - 1 ) ), - af_print_idx( buf6, af_get_strong_edge_index( hints, - point->after, - 1 ) ), - af_print_idx( buf7, af_get_strong_edge_index( hints, - point->before, - 0 ) ), - af_print_idx( buf8, af_get_strong_edge_index( hints, - point->after, - 0 ) ) )); + (double)point->ox / 64, + (double)point->oy / 64, + (double)point->x / 64, + (double)point->y / 64, + + af_print_idx( buf5, 16, + af_get_strong_edge_index( hints, + point->before, + 1 ) ), + af_print_idx( buf6, 16, + af_get_strong_edge_index( hints, + point->after, + 1 ) ), + af_print_idx( buf7, 16, + af_get_strong_edge_index( hints, + point->before, + 0 ) ), + af_print_idx( buf8, 16, + af_get_strong_edge_index( hints, + point->after, + 0 ) ) )); } AF_DUMP(( "\n" )); } @@ -476,9 +579,12 @@ AF_INDEX_NUM( seg->first, points ), AF_INDEX_NUM( seg->last, points ), - af_print_idx( buf1, AF_INDEX_NUM( seg->link, segments ) ), - af_print_idx( buf2, AF_INDEX_NUM( seg->serif, segments ) ), - af_print_idx( buf3, AF_INDEX_NUM( seg->edge, edges ) ), + af_print_idx( buf1, 16, + AF_INDEX_NUM( seg->link, segments ) ), + af_print_idx( buf2, 16, + AF_INDEX_NUM( seg->serif, segments ) ), + af_print_idx( buf3, 16, + AF_INDEX_NUM( seg->edge, edges ) ), seg->height, seg->height - ( seg->max_coord - seg->min_coord ), @@ -499,7 +605,7 @@ FT_Error af_glyph_hints_get_num_segments( AF_GlyphHints hints, FT_Int dimension, - FT_Int* num_segments ) + FT_UInt* num_segments ) { AF_Dimension dim; AF_AxisHints axis; @@ -525,7 +631,7 @@ FT_Error af_glyph_hints_get_segment_offset( AF_GlyphHints hints, FT_Int dimension, - FT_Int idx, + FT_UInt idx, FT_Pos *offset, FT_Bool *is_blue, FT_Pos *blue_offset ) @@ -542,7 +648,7 @@ axis = &hints->axis[dim]; - if ( idx < 0 || idx >= axis->num_segments ) + if ( idx >= axis->num_segments ) return FT_THROW( Invalid_Argument ); seg = &axis->segments[idx]; @@ -594,13 +700,13 @@ if ( dimension == AF_DIMENSION_HORZ ) AF_DUMP(( "Table of %s edges (1px=%.2fu, 10u=%.2fpx):\n", "vertical", - 65536.0 * 64.0 / hints->x_scale, - 10.0 * hints->x_scale / 65536.0 / 64.0 )); + 65536 * 64 / (double)hints->x_scale, + 10 * (double)hints->x_scale / 65536 / 64 )); else AF_DUMP(( "Table of %s edges (1px=%.2fu, 10u=%.2fpx):\n", "horizontal", - 65536.0 * 64.0 / hints->y_scale, - 10.0 * hints->y_scale / 65536.0 / 64.0 )); + 65536 * 64 / (double)hints->y_scale, + 10 * (double)hints->y_scale / 65536 / 64 )); if ( axis->num_edges ) { @@ -616,14 +722,16 @@ AF_DUMP(( " %5d %7.2f %5s %4s %5s" " %c %7.2f %7.2f %11s\n", AF_INDEX_NUM( edge, edges ), - (int)edge->opos / 64.0, + (double)(int)edge->opos / 64, af_dir_str( (AF_Direction)edge->dir ), - af_print_idx( buf1, AF_INDEX_NUM( edge->link, edges ) ), - af_print_idx( buf2, AF_INDEX_NUM( edge->serif, edges ) ), + af_print_idx( buf1, 16, + AF_INDEX_NUM( edge->link, edges ) ), + af_print_idx( buf2, 16, + AF_INDEX_NUM( edge->serif, edges ) ), edge->blue_edge ? 'y' : 'n', - edge->opos / 64.0, - edge->pos / 64.0, + (double)edge->opos / 64, + (double)edge->pos / 64, af_edge_flags_to_string( edge->flags ) )); AF_DUMP(( "\n" )); } @@ -764,7 +872,7 @@ { FT_Error error = FT_Err_Ok; AF_Point points; - FT_UInt old_max, new_max; + FT_Int old_max, new_max; FT_Fixed x_scale = hints->x_scale; FT_Fixed y_scale = hints->y_scale; FT_Pos x_delta = hints->x_delta; @@ -781,8 +889,8 @@ hints->axis[1].num_edges = 0; /* first of all, reallocate the contours array if necessary */ - new_max = (FT_UInt)outline->n_contours; - old_max = (FT_UInt)hints->max_contours; + new_max = outline->n_contours; + old_max = hints->max_contours; if ( new_max <= AF_CONTOURS_EMBEDDED ) { @@ -797,12 +905,12 @@ if ( hints->contours == hints->embedded.contours ) hints->contours = NULL; - new_max = ( new_max + 3 ) & ~3U; /* round up to a multiple of 4 */ + new_max = ( new_max + 3 ) & ~3; /* round up to a multiple of 4 */ if ( FT_RENEW_ARRAY( hints->contours, old_max, new_max ) ) goto Exit; - hints->max_contours = (FT_Int)new_max; + hints->max_contours = new_max; } /* @@ -810,8 +918,8 @@ * note that we reserve two additional point positions, used to * hint metrics appropriately */ - new_max = (FT_UInt)( outline->n_points + 2 ); - old_max = (FT_UInt)hints->max_points; + new_max = outline->n_points + 2; + old_max = hints->max_points; if ( new_max <= AF_POINTS_EMBEDDED ) { @@ -826,12 +934,12 @@ if ( hints->points == hints->embedded.points ) hints->points = NULL; - new_max = ( new_max + 2 + 7 ) & ~7U; /* round up to a multiple of 8 */ + new_max = ( new_max + 2 + 7 ) & ~7; /* round up to a multiple of 8 */ if ( FT_RENEW_ARRAY( hints->points, old_max, new_max ) ) goto Exit; - hints->max_points = (FT_Int)new_max; + hints->max_points = new_max; } hints->num_points = outline->n_points; @@ -855,9 +963,6 @@ hints->x_delta = x_delta; hints->y_delta = y_delta; - hints->xmin_delta = 0; - hints->xmax_delta = 0; - points = hints->points; if ( hints->num_points == 0 ) goto Exit; @@ -1221,7 +1326,7 @@ { AF_AxisHints axis = & hints->axis[dim]; AF_Segment segments = axis->segments; - AF_Segment segment_limit = segments + axis->num_segments; + AF_Segment segment_limit = FT_OFFSET( segments, axis->num_segments ); AF_Segment seg; @@ -1298,7 +1403,7 @@ AF_Point point_limit = points + hints->num_points; AF_AxisHints axis = &hints->axis[dim]; AF_Edge edges = axis->edges; - AF_Edge edge_limit = edges + axis->num_edges; + AF_Edge edge_limit = FT_OFFSET( edges, axis->num_edges ); FT_UInt touch_flag; @@ -1688,33 +1793,4 @@ } -#ifdef AF_CONFIG_OPTION_USE_WARPER - - /* Apply (small) warp scale and warp delta for given dimension. */ - - FT_LOCAL_DEF( void ) - af_glyph_hints_scale_dim( AF_GlyphHints hints, - AF_Dimension dim, - FT_Fixed scale, - FT_Pos delta ) - { - AF_Point points = hints->points; - AF_Point points_limit = points + hints->num_points; - AF_Point point; - - - if ( dim == AF_DIMENSION_HORZ ) - { - for ( point = points; point < points_limit; point++ ) - point->x = FT_MulFix( point->fx, scale ) + delta; - } - else - { - for ( point = points; point < points_limit; point++ ) - point->y = FT_MulFix( point->fy, scale ) + delta; - } - } - -#endif /* AF_CONFIG_OPTION_USE_WARPER */ - /* END */ diff --git a/src/3rdparty/freetype/src/autofit/afhints.h b/src/3rdparty/freetype/src/autofit/afhints.h index e0cf612f0c..d1cf9529bf 100644 --- a/src/3rdparty/freetype/src/autofit/afhints.h +++ b/src/3rdparty/freetype/src/autofit/afhints.h @@ -4,7 +4,7 @@ * * Auto-fitter hinting routines (specification). * - * Copyright (C) 2003-2019 by + * Copyright (C) 2003-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -21,8 +21,6 @@ #include "aftypes.h" -#define xxAF_SORT_SEGMENTS - FT_BEGIN_HEADER /* @@ -310,15 +308,12 @@ FT_BEGIN_HEADER typedef struct AF_AxisHintsRec_ { - FT_Int num_segments; /* number of used segments */ - FT_Int max_segments; /* number of allocated segments */ + FT_UInt num_segments; /* number of used segments */ + FT_UInt max_segments; /* number of allocated segments */ AF_Segment segments; /* segments array */ -#ifdef AF_SORT_SEGMENTS - FT_Int mid_segments; -#endif - FT_Int num_edges; /* number of used edges */ - FT_Int max_edges; /* number of allocated edges */ + FT_UInt num_edges; /* number of used edges */ + FT_UInt max_edges; /* number of allocated edges */ AF_Edge edges; /* edges array */ AF_Direction major_dir; /* either vertical or horizontal */ @@ -362,9 +357,6 @@ FT_BEGIN_HEADER /* implementations */ AF_StyleMetrics metrics; - FT_Pos xmin_delta; /* used for warping */ - FT_Pos xmax_delta; - /* Two arrays to avoid allocation penalty. */ /* The `embedded' structure must be the last element! */ struct @@ -383,14 +375,14 @@ FT_BEGIN_HEADER #ifdef FT_DEBUG_AUTOFIT #define AF_HINTS_DO_HORIZONTAL( h ) \ - ( !_af_debug_disable_horz_hints && \ + ( !af_debug_disable_horz_hints_ && \ !AF_HINTS_TEST_SCALER( h, AF_SCALER_FLAG_NO_HORIZONTAL ) ) #define AF_HINTS_DO_VERTICAL( h ) \ - ( !_af_debug_disable_vert_hints && \ + ( !af_debug_disable_vert_hints_ && \ !AF_HINTS_TEST_SCALER( h, AF_SCALER_FLAG_NO_VERTICAL ) ) -#define AF_HINTS_DO_BLUES( h ) ( !_af_debug_disable_blue_hints ) +#define AF_HINTS_DO_BLUES( h ) ( !af_debug_disable_blue_hints_ ) #else /* !FT_DEBUG_AUTOFIT */ @@ -408,10 +400,6 @@ FT_BEGIN_HEADER #define AF_HINTS_DO_ADVANCE( h ) \ !AF_HINTS_TEST_SCALER( h, AF_SCALER_FLAG_NO_ADVANCE ) -#define AF_HINTS_DO_WARP( h ) \ - !AF_HINTS_TEST_SCALER( h, AF_SCALER_FLAG_NO_WARPER ) - - FT_LOCAL( AF_Direction ) af_direction_compute( FT_Pos dx, @@ -459,14 +447,6 @@ FT_BEGIN_HEADER af_glyph_hints_align_weak_points( AF_GlyphHints hints, AF_Dimension dim ); -#ifdef AF_CONFIG_OPTION_USE_WARPER - FT_LOCAL( void ) - af_glyph_hints_scale_dim( AF_GlyphHints hints, - AF_Dimension dim, - FT_Fixed scale, - FT_Pos delta ); -#endif - FT_LOCAL( void ) af_glyph_hints_done( AF_GlyphHints hints ); diff --git a/src/3rdparty/freetype/src/autofit/afindic.c b/src/3rdparty/freetype/src/autofit/afindic.c index a17117c712..7fb12c63d5 100644 --- a/src/3rdparty/freetype/src/autofit/afindic.c +++ b/src/3rdparty/freetype/src/autofit/afindic.c @@ -4,7 +4,7 @@ * * Auto-fitter hinting routines for Indic writing system (body). * - * Copyright (C) 2007-2019 by + * Copyright (C) 2007-2023 by * Rahul Bhalerao <rahul.bhalerao@redhat.com>, <b.rahul.pm@gmail.com>. * * This file is part of the FreeType project, and may only be used, @@ -27,15 +27,13 @@ #include "aferrors.h" -#ifdef AF_CONFIG_OPTION_USE_WARPER -#include "afwarp.h" -#endif - - static FT_Error - af_indic_metrics_init( AF_CJKMetrics metrics, - FT_Face face ) + af_indic_metrics_init( AF_StyleMetrics metrics_, /* AF_CJKMetrics */ + FT_Face face ) { + AF_CJKMetrics metrics = (AF_CJKMetrics)metrics_; + + /* skip blue zone init in CJK routines */ FT_CharMap oldmap = face->charmap; @@ -54,15 +52,14 @@ af_cjk_metrics_check_digits( metrics, face ); } - FT_Set_Charmap( face, oldmap ); - + face->charmap = oldmap; return FT_Err_Ok; } static void - af_indic_metrics_scale( AF_CJKMetrics metrics, - AF_Scaler scaler ) + af_indic_metrics_scale( AF_StyleMetrics metrics, + AF_Scaler scaler ) { /* use CJK routines */ af_cjk_metrics_scale( metrics, scaler ); @@ -70,8 +67,8 @@ static FT_Error - af_indic_hints_init( AF_GlyphHints hints, - AF_CJKMetrics metrics ) + af_indic_hints_init( AF_GlyphHints hints, + AF_StyleMetrics metrics ) { /* use CJK routines */ return af_cjk_hints_init( hints, metrics ); @@ -79,10 +76,10 @@ static FT_Error - af_indic_hints_apply( FT_UInt glyph_index, - AF_GlyphHints hints, - FT_Outline* outline, - AF_CJKMetrics metrics ) + af_indic_hints_apply( FT_UInt glyph_index, + AF_GlyphHints hints, + FT_Outline* outline, + AF_StyleMetrics metrics ) { /* use CJK routines */ return af_cjk_hints_apply( glyph_index, hints, outline, metrics ); @@ -93,10 +90,13 @@ /* metrics class. */ static void - af_indic_get_standard_widths( AF_CJKMetrics metrics, - FT_Pos* stdHW, - FT_Pos* stdVW ) + af_indic_get_standard_widths( AF_StyleMetrics metrics_, /* AF_CJKMetrics */ + FT_Pos* stdHW, + FT_Pos* stdVW ) { + AF_CJKMetrics metrics = (AF_CJKMetrics)metrics_; + + if ( stdHW ) *stdHW = metrics->axis[AF_DIMENSION_VERT].standard_width; diff --git a/src/3rdparty/freetype/src/autofit/afindic.h b/src/3rdparty/freetype/src/autofit/afindic.h index bc5bc59fa5..3eb67f63b0 100644 --- a/src/3rdparty/freetype/src/autofit/afindic.h +++ b/src/3rdparty/freetype/src/autofit/afindic.h @@ -5,7 +5,7 @@ * Auto-fitter hinting routines for Indic writing system * (specification). * - * Copyright (C) 2007-2019 by + * Copyright (C) 2007-2023 by * Rahul Bhalerao <rahul.bhalerao@redhat.com>, <b.rahul.pm@gmail.com>. * * This file is part of the FreeType project, and may only be used, diff --git a/src/3rdparty/freetype/src/autofit/aflatin.c b/src/3rdparty/freetype/src/autofit/aflatin.c index 27d4024882..b86367aa94 100644 --- a/src/3rdparty/freetype/src/autofit/aflatin.c +++ b/src/3rdparty/freetype/src/autofit/aflatin.c @@ -4,7 +4,7 @@ * * Auto-fitter hinting routines for latin writing system (body). * - * Copyright (C) 2003-2019 by + * Copyright (C) 2003-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -16,20 +16,14 @@ */ -#include <ft2build.h> -#include FT_ADVANCES_H -#include FT_INTERNAL_DEBUG_H +#include <freetype/ftadvanc.h> +#include <freetype/internal/ftdebug.h> #include "afglobal.h" #include "aflatin.h" #include "aferrors.h" -#ifdef AF_CONFIG_OPTION_USE_WARPER -#include "afwarp.h" -#endif - - /************************************************************************** * * The macro FT_COMPONENT is used in trace mode. It is an implicit @@ -64,11 +58,11 @@ AF_GlyphHintsRec hints[1]; - FT_TRACE5(( "\n" - "latin standard widths computation (style `%s')\n" - "=====================================================\n" - "\n", + FT_TRACE5(( "\n" )); + FT_TRACE5(( "latin standard widths computation (style `%s')\n", af_style_names[metrics->root.style_class->style] )); + FT_TRACE5(( "=====================================================\n" )); + FT_TRACE5(( "\n" )); af_glyph_hints_init( hints, face->memory ); @@ -155,7 +149,7 @@ goto Exit; } - FT_TRACE5(( "standard character: U+%04lX (glyph index %d)\n", + FT_TRACE5(( "standard character: U+%04lX (glyph index %ld)\n", ch, glyph_index )); error = FT_Load_Glyph( face, glyph_index, FT_LOAD_NO_SCALE ); @@ -206,7 +200,7 @@ (AF_Dimension)dim ); seg = axhints->segments; - limit = seg + axhints->num_segments; + limit = FT_OFFSET( seg, axhints->num_segments ); for ( ; seg < limit; seg++ ) { @@ -258,9 +252,9 @@ dim == AF_DIMENSION_VERT ? "horizontal" : "vertical" )); - FT_TRACE5(( " %d (standard)", axis->standard_width )); + FT_TRACE5(( " %ld (standard)", axis->standard_width )); for ( i = 1; i < axis->width_count; i++ ) - FT_TRACE5(( " %d", axis->widths[i].org )); + FT_TRACE5(( " %ld", axis->widths[i].org )); FT_TRACE5(( "\n" )); } @@ -351,9 +345,9 @@ /* we walk over the blue character strings as specified in the */ /* style's entry in the `af_blue_stringset' array */ - FT_TRACE5(( "latin blue zones computation\n" - "============================\n" - "\n" )); + FT_TRACE5(( "latin blue zones computation\n" )); + FT_TRACE5(( "============================\n" )); + FT_TRACE5(( "\n" )); #ifdef FT_CONFIG_OPTION_USE_HARFBUZZ shaper_buf = af_shaper_buf_create( face ); @@ -502,23 +496,20 @@ /* now compute min or max point indices and coordinates */ points = outline.points; best_point = -1; + best_contour_first = -1; + best_contour_last = -1; best_y = 0; /* make compiler happy */ - best_contour_first = 0; /* ditto */ - best_contour_last = 0; /* ditto */ { FT_Int nn; - FT_Int first = 0; - FT_Int last = -1; + FT_Int pp, first, last; - for ( nn = 0; nn < outline.n_contours; first = last + 1, nn++ ) + last = -1; + for ( nn = 0; nn < outline.n_contours; nn++ ) { - FT_Int old_best_point = best_point; - FT_Int pp; - - - last = outline.contours[nn]; + first = last + 1; + last = outline.contours[nn]; /* Avoid single-point contours since they are never */ /* rasterized. In some fonts, they correspond to mark */ @@ -557,7 +548,7 @@ } } - if ( best_point != old_best_point ) + if ( best_point > best_contour_last ) { best_contour_first = first; best_contour_last = last; @@ -977,9 +968,8 @@ if ( AF_LATIN_IS_X_HEIGHT_BLUE( bs ) ) blue->flags |= AF_LATIN_BLUE_ADJUSTMENT; - FT_TRACE5(( " -> reference = %ld\n" - " overshoot = %ld\n", - *blue_ref, *blue_shoot )); + FT_TRACE5(( " -> reference = %ld\n", *blue_ref )); + FT_TRACE5(( " overshoot = %ld\n", *blue_shoot )); } /* end for loop */ @@ -1032,7 +1022,7 @@ { *a = *b; FT_TRACE5(( "blue zone overlap:" - " adjusting %s %d to %ld\n", + " adjusting %s %td to %ld\n", a_is_top ? "overshoot" : "reference", blue_sorted[i] - axis->blues, *a )); @@ -1050,7 +1040,7 @@ AF_FaceGlobals globals = metrics->root.globals; FT_UShort* gstyles = globals->glyph_styles; - FT_Long i; + FT_UInt i; FT_TRACE5(( "no blue zones found:" @@ -1075,8 +1065,8 @@ af_latin_metrics_check_digits( AF_LatinMetrics metrics, FT_Face face ) { - FT_Bool started = 0, same_width = 1; - FT_Fixed advance = 0, old_advance = 0; + FT_Bool started = 0, same_width = 1; + FT_Long advance = 0, old_advance = 0; /* If HarfBuzz is not available, we need a pointer to a single */ /* unsigned long value. */ @@ -1141,9 +1131,11 @@ /* Initialize global metrics. */ FT_LOCAL_DEF( FT_Error ) - af_latin_metrics_init( AF_LatinMetrics metrics, + af_latin_metrics_init( AF_StyleMetrics metrics_, /* AF_LatinMetrics */ FT_Face face ) { + AF_LatinMetrics metrics = (AF_LatinMetrics)metrics_; + FT_Error error = FT_Err_Ok; FT_CharMap oldmap = face->charmap; @@ -1164,7 +1156,7 @@ } Exit: - FT_Set_Charmap( face, oldmap ); + face->charmap = oldmap; return error; } @@ -1276,29 +1268,28 @@ if ( dist == 0 ) { - FT_TRACE5(( - "af_latin_metrics_scale_dim:" - " x height alignment (style `%s'):\n" - " " - " vertical scaling changed from %.5f to %.5f (by %d%%)\n" - "\n", - af_style_names[metrics->root.style_class->style], - scale / 65536.0, - new_scale / 65536.0, - ( fitted - scaled ) * 100 / scaled )); + FT_TRACE5(( "af_latin_metrics_scale_dim:" + " x height alignment (style `%s'):\n", + af_style_names[metrics->root.style_class->style] )); + FT_TRACE5(( " " + " vertical scaling changed" + " from %.5f to %.5f (by %ld%%)\n", + (double)scale / 65536, + (double)new_scale / 65536, + ( fitted - scaled ) * 100 / scaled )); + FT_TRACE5(( "\n" )); scale = new_scale; } #ifdef FT_DEBUG_LEVEL_TRACE else { - FT_TRACE5(( - "af_latin_metrics_scale_dim:" - " x height alignment (style `%s'):\n" - " " - " excessive vertical scaling abandoned\n" - "\n", - af_style_names[metrics->root.style_class->style] )); + FT_TRACE5(( "af_latin_metrics_scale_dim:" + " x height alignment (style `%s'):\n", + af_style_names[metrics->root.style_class->style] )); + FT_TRACE5(( " " + " excessive vertical scaling abandoned\n" )); + FT_TRACE5(( "\n" )); } #endif } @@ -1333,9 +1324,9 @@ width->cur = FT_MulFix( width->org, scale ); width->fit = width->cur; - FT_TRACE5(( " %d scaled to %.2f\n", + FT_TRACE5(( " %ld scaled to %.2f\n", width->org, - width->cur / 64.0 )); + (double)width->cur / 64 )); } FT_TRACE5(( "\n" )); @@ -1347,9 +1338,11 @@ #ifdef FT_DEBUG_LEVEL_TRACE if ( axis->extra_light ) - FT_TRACE5(( "`%s' style is extra light (at current resolution)\n" - "\n", + { + FT_TRACE5(( "`%s' style is extra light (at current resolution)\n", af_style_names[metrics->root.style_class->style] )); + FT_TRACE5(( "\n" )); + } #endif if ( dim == AF_DIMENSION_VERT ) @@ -1474,16 +1467,16 @@ AF_LatinBlue blue = &axis->blues[nn]; - FT_TRACE5(( " reference %d: %d scaled to %.2f%s\n" - " overshoot %d: %d scaled to %.2f%s\n", + FT_TRACE5(( " reference %d: %ld scaled to %.2f%s\n", nn, blue->ref.org, - blue->ref.fit / 64.0, + (double)blue->ref.fit / 64, ( blue->flags & AF_LATIN_BLUE_ACTIVE ) ? "" - : " (inactive)", + : " (inactive)" )); + FT_TRACE5(( " overshoot %d: %ld scaled to %.2f%s\n", nn, blue->shoot.org, - blue->shoot.fit / 64.0, + (double)blue->shoot.fit / 64, ( blue->flags & AF_LATIN_BLUE_ACTIVE ) ? "" : " (inactive)" )); } @@ -1495,9 +1488,12 @@ /* Scale global values in both directions. */ FT_LOCAL_DEF( void ) - af_latin_metrics_scale( AF_LatinMetrics metrics, + af_latin_metrics_scale( AF_StyleMetrics metrics_, /* AF_LatinMetrics */ AF_Scaler scaler ) { + AF_LatinMetrics metrics = (AF_LatinMetrics)metrics_; + + metrics->root.scaler.render_mode = scaler->render_mode; metrics->root.scaler.face = scaler->face; metrics->root.scaler.flags = scaler->flags; @@ -1510,11 +1506,14 @@ /* Extract standard_width from writing system/script specific */ /* metrics class. */ - FT_LOCAL_DEF( void ) - af_latin_get_standard_widths( AF_LatinMetrics metrics, + FT_CALLBACK_DEF( void ) + af_latin_get_standard_widths( AF_StyleMetrics metrics_, /* AF_LatinMetrics */ FT_Pos* stdHW, FT_Pos* stdVW ) { + AF_LatinMetrics metrics = (AF_LatinMetrics)metrics_; + + if ( stdHW ) *stdHW = metrics->axis[AF_DIMENSION_VERT].standard_width; @@ -1848,6 +1847,31 @@ ( FT_ABS( point->out_dir ) == major_dir || point == point->prev ) ) { + /* + * For efficiency, we restrict the number of segments to 1000, + * which is a heuristic value: it is very unlikely that a glyph + * with so many segments can be hinted in a sensible way. + * Reasons: + * + * - The glyph has really 1000 segments; this implies that it has + * at least 2000 outline points. Assuming 'normal' fonts that + * have superfluous points optimized away, viewing such a glyph + * only makes sense at large magnifications where hinting + * isn't applied anyway. + * + * - We have a broken glyph. Hinting doesn't make sense in this + * case either. + */ + if ( axis->num_segments > 1000 ) + { + FT_TRACE0(( "af_latin_hints_compute_segments:" + " more than 1000 segments in this glyph;\n" )); + FT_TRACE0(( " " + " hinting is suppressed\n" )); + axis->num_segments = 0; + return FT_Err_Ok; + } + /* this is the start of a new segment! */ segment_dir = (AF_Direction)point->out_dir; @@ -1910,7 +1934,7 @@ /* sense -- this is used to better detect and ignore serifs */ { AF_Segment segments = axis->segments; - AF_Segment segments_end = segments + axis->num_segments; + AF_Segment segments_end = FT_OFFSET( segments, axis->num_segments ); for ( segment = segments; segment < segments_end; segment++ ) @@ -1970,7 +1994,7 @@ { AF_AxisHints axis = &hints->axis[dim]; AF_Segment segments = axis->segments; - AF_Segment segment_limit = segments + axis->num_segments; + AF_Segment segment_limit = FT_OFFSET( segments, axis->num_segments ); FT_Pos len_threshold, len_score, dist_score, max_width; AF_Segment seg1, seg2; @@ -2022,7 +2046,7 @@ max = seg2->max_coord; /* compute maximum coordinate difference of the two segments */ - /* (this is, how much they overlap) */ + /* (that is, how much they overlap) */ len = max - min; if ( len >= len_threshold ) { @@ -2090,7 +2114,7 @@ { if ( seg2->link != seg1 ) { - seg1->link = 0; + seg1->link = NULL; seg1->serif = seg2->link; } } @@ -2115,7 +2139,7 @@ FT_Bool top_to_bottom_hinting = 0; AF_Segment segments = axis->segments; - AF_Segment segment_limit = segments + axis->num_segments; + AF_Segment segment_limit = FT_OFFSET( segments, axis->num_segments ); AF_Segment seg; #if 0 @@ -2184,7 +2208,7 @@ for ( seg = segments; seg < segment_limit; seg++ ) { AF_Edge found = NULL; - FT_Int ee; + FT_UInt ee; /* ignore too short segments, too wide ones, and, in this loop, */ @@ -2258,7 +2282,7 @@ for ( seg = segments; seg < segment_limit; seg++ ) { AF_Edge found = NULL; - FT_Int ee; + FT_UInt ee; if ( seg->dir != AF_DIR_NONE ) @@ -2314,7 +2338,7 @@ */ { AF_Edge edges = axis->edges; - AF_Edge edge_limit = edges + axis->num_edges; + AF_Edge edge_limit = FT_OFFSET( edges, axis->num_edges ); AF_Edge edge; @@ -2481,7 +2505,7 @@ { AF_AxisHints axis = &hints->axis[AF_DIMENSION_VERT]; AF_Edge edge = axis->edges; - AF_Edge edge_limit = edge + axis->num_edges; + AF_Edge edge_limit = FT_OFFSET( edge, axis->num_edges ); AF_LatinAxis latin = &metrics->axis[AF_DIMENSION_VERT]; FT_Fixed scale = latin->scale; @@ -2591,8 +2615,10 @@ static FT_Error af_latin_hints_init( AF_GlyphHints hints, - AF_LatinMetrics metrics ) + AF_StyleMetrics metrics_ ) /* AF_LatinMetrics */ { + AF_LatinMetrics metrics = (AF_LatinMetrics)metrics_; + FT_Render_Mode mode; FT_UInt32 scaler_flags, other_flags; FT_Face face = metrics->root.scaler.face; @@ -2612,11 +2638,6 @@ /* compute flags depending on render mode, etc. */ mode = metrics->root.scaler.render_mode; -#if 0 /* #ifdef AF_CONFIG_OPTION_USE_WARPER */ - if ( mode == FT_RENDER_MODE_LCD || mode == FT_RENDER_MODE_LCD_V ) - metrics->root.scaler.render_mode = mode = FT_RENDER_MODE_NORMAL; -#endif - scaler_flags = hints->scaler_flags; other_flags = 0; @@ -2654,12 +2675,6 @@ ( face->style_flags & FT_STYLE_FLAG_ITALIC ) != 0 ) scaler_flags |= AF_SCALER_FLAG_NO_HORIZONTAL; -#ifdef AF_CONFIG_OPTION_USE_WARPER - /* get (global) warper flag */ - if ( !metrics->root.globals->module->warping ) - scaler_flags |= AF_SCALER_FLAG_NO_WARPER; -#endif - hints->scaler_flags = scaler_flags; hints->other_flags = other_flags; @@ -2945,10 +2960,11 @@ stem_edge->pos = base_edge->pos + fitted_width; - FT_TRACE5(( " LINK: edge %d (opos=%.2f) linked to %.2f," + FT_TRACE5(( " LINK: edge %td (opos=%.2f) linked to %.2f," " dist was %.2f, now %.2f\n", - stem_edge - hints->axis[dim].edges, stem_edge->opos / 64.0, - stem_edge->pos / 64.0, dist / 64.0, fitted_width / 64.0 )); + stem_edge - hints->axis[dim].edges, + (double)stem_edge->opos / 64, (double)stem_edge->pos / 64, + (double)dist / 64, (double)fitted_width / 64 )); } @@ -2985,7 +3001,7 @@ { AF_AxisHints axis = &hints->axis[dim]; AF_Edge edges = axis->edges; - AF_Edge edge_limit = edges + axis->num_edges; + AF_Edge edge_limit = FT_OFFSET( edges, axis->num_edges ); FT_PtrDist n_edges; AF_Edge edge; AF_Edge anchor = NULL; @@ -3069,15 +3085,17 @@ #ifdef FT_DEBUG_LEVEL_TRACE if ( !anchor ) - FT_TRACE5(( " BLUE_ANCHOR: edge %d (opos=%.2f) snapped to %.2f," - " was %.2f (anchor=edge %d)\n", - edge1 - edges, edge1->opos / 64.0, blue->fit / 64.0, - edge1->pos / 64.0, edge - edges )); + FT_TRACE5(( " BLUE_ANCHOR: edge %td (opos=%.2f) snapped to %.2f," + " was %.2f (anchor=edge %td)\n", + edge1 - edges, + (double)edge1->opos / 64, (double)blue->fit / 64, + (double)edge1->pos / 64, edge - edges )); else - FT_TRACE5(( " BLUE: edge %d (opos=%.2f) snapped to %.2f," + FT_TRACE5(( " BLUE: edge %td (opos=%.2f) snapped to %.2f," " was %.2f\n", - edge1 - edges, edge1->opos / 64.0, blue->fit / 64.0, - edge1->pos / 64.0 )); + edge1 - edges, + (double)edge1->opos / 64, (double)blue->fit / 64, + (double)edge1->pos / 64 )); num_actions++; #endif @@ -3123,7 +3141,7 @@ /* this should not happen, but it's better to be safe */ if ( edge2->blue_edge ) { - FT_TRACE5(( " ASSERTION FAILED for edge %d\n", edge2 - edges )); + FT_TRACE5(( " ASSERTION FAILED for edge %td\n", edge2 - edges )); af_latin_align_linked_edge( hints, dim, edge2, edge ); edge->flags |= AF_EDGE_DONE; @@ -3191,11 +3209,11 @@ anchor = edge; edge->flags |= AF_EDGE_DONE; - FT_TRACE5(( " ANCHOR: edge %d (opos=%.2f) and %d (opos=%.2f)" + FT_TRACE5(( " ANCHOR: edge %td (opos=%.2f) and %td (opos=%.2f)" " snapped to %.2f and %.2f\n", - edge - edges, edge->opos / 64.0, - edge2 - edges, edge2->opos / 64.0, - edge->pos / 64.0, edge2->pos / 64.0 )); + edge - edges, (double)edge->opos / 64, + edge2 - edges, (double)edge2->opos / 64, + (double)edge->pos / 64, (double)edge2->pos / 64 )); af_latin_align_linked_edge( hints, dim, edge, edge2 ); @@ -3220,9 +3238,9 @@ if ( edge2->flags & AF_EDGE_DONE ) { - FT_TRACE5(( " ADJUST: edge %d (pos=%.2f) moved to %.2f\n", - edge - edges, edge->pos / 64.0, - ( edge2->pos - cur_len ) / 64.0 )); + FT_TRACE5(( " ADJUST: edge %td (pos=%.2f) moved to %.2f\n", + edge - edges, (double)edge->pos / 64, + (double)( edge2->pos - cur_len ) / 64 )); edge->pos = edge2->pos - cur_len; } @@ -3261,11 +3279,11 @@ edge->pos = cur_pos1 - cur_len / 2; edge2->pos = cur_pos1 + cur_len / 2; - FT_TRACE5(( " STEM: edge %d (opos=%.2f) linked to %d (opos=%.2f)" + FT_TRACE5(( " STEM: edge %td (opos=%.2f) linked to %td (opos=%.2f)" " snapped to %.2f and %.2f\n", - edge - edges, edge->opos / 64.0, - edge2 - edges, edge2->opos / 64.0, - edge->pos / 64.0, edge2->pos / 64.0 )); + edge - edges, (double)edge->opos / 64, + edge2 - edges, (double)edge2->opos / 64, + (double)edge->pos / 64, (double)edge2->pos / 64 )); } else @@ -3292,11 +3310,11 @@ edge->pos = ( delta1 < delta2 ) ? cur_pos1 : cur_pos2; edge2->pos = edge->pos + cur_len; - FT_TRACE5(( " STEM: edge %d (opos=%.2f) linked to %d (opos=%.2f)" + FT_TRACE5(( " STEM: edge %td (opos=%.2f) linked to %td (opos=%.2f)" " snapped to %.2f and %.2f\n", - edge - edges, edge->opos / 64.0, - edge2 - edges, edge2->opos / 64.0, - edge->pos / 64.0, edge2->pos / 64.0 )); + edge - edges, (double)edge->opos / 64, + edge2 - edges, (double)edge2->opos / 64, + (double)edge->pos / 64, (double)edge2->pos / 64 )); } #ifdef FT_DEBUG_LEVEL_TRACE @@ -3315,10 +3333,10 @@ if ( edge->link && FT_ABS( edge->link->pos - edge[-1].pos ) > 16 ) { #ifdef FT_DEBUG_LEVEL_TRACE - FT_TRACE5(( " BOUND: edge %d (pos=%.2f) moved to %.2f\n", + FT_TRACE5(( " BOUND: edge %td (pos=%.2f) moved to %.2f\n", edge - edges, - edge->pos / 64.0, - edge[-1].pos / 64.0 )); + (double)edge->pos / 64, + (double)edge[-1].pos / 64 )); num_actions++; #endif @@ -3417,19 +3435,20 @@ if ( delta < 64 + 16 ) { af_latin_align_serif_edge( hints, edge->serif, edge ); - FT_TRACE5(( " SERIF: edge %d (opos=%.2f) serif to %d (opos=%.2f)" + FT_TRACE5(( " SERIF: edge %td (opos=%.2f) serif to %td (opos=%.2f)" " aligned to %.2f\n", - edge - edges, edge->opos / 64.0, - edge->serif - edges, edge->serif->opos / 64.0, - edge->pos / 64.0 )); + edge - edges, (double)edge->opos / 64, + edge->serif - edges, (double)edge->serif->opos / 64, + (double)edge->pos / 64 )); } else if ( !anchor ) { edge->pos = FT_PIX_ROUND( edge->opos ); anchor = edge; - FT_TRACE5(( " SERIF_ANCHOR: edge %d (opos=%.2f)" + FT_TRACE5(( " SERIF_ANCHOR: edge %td (opos=%.2f)" " snapped to %.2f\n", - edge-edges, edge->opos / 64.0, edge->pos / 64.0 )); + edge - edges, + (double)edge->opos / 64, (double)edge->pos / 64 )); } else { @@ -3455,19 +3474,20 @@ after->pos - before->pos, after->opos - before->opos ); - FT_TRACE5(( " SERIF_LINK1: edge %d (opos=%.2f) snapped to %.2f" - " from %d (opos=%.2f)\n", - edge - edges, edge->opos / 64.0, - edge->pos / 64.0, - before - edges, before->opos / 64.0 )); + FT_TRACE5(( " SERIF_LINK1: edge %td (opos=%.2f) snapped to %.2f" + " from %td (opos=%.2f)\n", + edge - edges, (double)edge->opos / 64, + (double)edge->pos / 64, + before - edges, (double)before->opos / 64 )); } else { edge->pos = anchor->pos + ( ( edge->opos - anchor->opos + 16 ) & ~31 ); - FT_TRACE5(( " SERIF_LINK2: edge %d (opos=%.2f)" + FT_TRACE5(( " SERIF_LINK2: edge %td (opos=%.2f)" " snapped to %.2f\n", - edge - edges, edge->opos / 64.0, edge->pos / 64.0 )); + edge - edges, + (double)edge->opos / 64, (double)edge->pos / 64 )); } } @@ -3485,10 +3505,10 @@ if ( edge->link && FT_ABS( edge->link->pos - edge[-1].pos ) > 16 ) { #ifdef FT_DEBUG_LEVEL_TRACE - FT_TRACE5(( " BOUND: edge %d (pos=%.2f) moved to %.2f\n", + FT_TRACE5(( " BOUND: edge %td (pos=%.2f) moved to %.2f\n", edge - edges, - edge->pos / 64.0, - edge[-1].pos / 64.0 )); + (double)edge->pos / 64, + (double)edge[-1].pos / 64 )); num_actions++; #endif @@ -3506,10 +3526,10 @@ if ( edge->link && FT_ABS( edge->link->pos - edge[-1].pos ) > 16 ) { #ifdef FT_DEBUG_LEVEL_TRACE - FT_TRACE5(( " BOUND: edge %d (pos=%.2f) moved to %.2f\n", + FT_TRACE5(( " BOUND: edge %td (pos=%.2f) moved to %.2f\n", edge - edges, - edge->pos / 64.0, - edge[1].pos / 64.0 )); + (double)edge->pos / 64, + (double)edge[1].pos / 64 )); num_actions++; #endif @@ -3534,8 +3554,10 @@ af_latin_hints_apply( FT_UInt glyph_index, AF_GlyphHints hints, FT_Outline* outline, - AF_LatinMetrics metrics ) + AF_StyleMetrics metrics_ ) /* AF_LatinMetrics */ { + AF_LatinMetrics metrics = (AF_LatinMetrics)metrics_; + FT_Error error; int dim; @@ -3576,24 +3598,6 @@ /* grid-fit the outline */ for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ ) { -#ifdef AF_CONFIG_OPTION_USE_WARPER - if ( dim == AF_DIMENSION_HORZ && - metrics->root.scaler.render_mode == FT_RENDER_MODE_NORMAL && - AF_HINTS_DO_WARP( hints ) ) - { - AF_WarperRec warper; - FT_Fixed scale; - FT_Pos delta; - - - af_warper_compute( &warper, hints, (AF_Dimension)dim, - &scale, &delta ); - af_glyph_hints_scale_dim( hints, (AF_Dimension)dim, - scale, delta ); - continue; - } -#endif /* AF_CONFIG_OPTION_USE_WARPER */ - if ( ( dim == AF_DIMENSION_HORZ && AF_HINTS_DO_HORIZONTAL( hints ) ) || ( dim == AF_DIMENSION_VERT && AF_HINTS_DO_VERTICAL( hints ) ) ) { diff --git a/src/3rdparty/freetype/src/autofit/aflatin.h b/src/3rdparty/freetype/src/autofit/aflatin.h index 40479538c2..31aa91d3bd 100644 --- a/src/3rdparty/freetype/src/autofit/aflatin.h +++ b/src/3rdparty/freetype/src/autofit/aflatin.h @@ -5,7 +5,7 @@ * Auto-fitter hinting routines for latin writing system * (specification). * - * Copyright (C) 2003-2019 by + * Copyright (C) 2003-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -116,11 +116,11 @@ FT_BEGIN_HEADER FT_LOCAL( FT_Error ) - af_latin_metrics_init( AF_LatinMetrics metrics, + af_latin_metrics_init( AF_StyleMetrics metrics, FT_Face face ); FT_LOCAL( void ) - af_latin_metrics_scale( AF_LatinMetrics metrics, + af_latin_metrics_scale( AF_StyleMetrics metrics, AF_Scaler scaler ); FT_LOCAL( void ) diff --git a/src/3rdparty/freetype/src/autofit/aflatin2.c b/src/3rdparty/freetype/src/autofit/aflatin2.c deleted file mode 100644 index c601ab8d9a..0000000000 --- a/src/3rdparty/freetype/src/autofit/aflatin2.c +++ /dev/null @@ -1,2428 +0,0 @@ -/* ATTENTION: This file doesn't compile. It is only here as a reference */ -/* of an alternative latin hinting algorithm that was always */ -/* marked as experimental. */ - - -/**************************************************************************** - * - * aflatin2.c - * - * Auto-fitter hinting routines for latin writing system (body). - * - * Copyright (C) 2003-2019 by - * David Turner, Robert Wilhelm, and Werner Lemberg. - * - * This file is part of the FreeType project, and may only be used, - * modified, and distributed under the terms of the FreeType project - * license, LICENSE.TXT. By continuing to use, modify, or distribute - * this file you indicate that you have read the license and - * understand and accept it fully. - * - */ - - -#include FT_ADVANCES_H - - -#ifdef FT_OPTION_AUTOFIT2 - -#include "afglobal.h" -#include "aflatin.h" -#include "aflatin2.h" -#include "aferrors.h" - - -#ifdef AF_CONFIG_OPTION_USE_WARPER -#include "afwarp.h" -#endif - - - /************************************************************************** - * - * The macro FT_COMPONENT is used in trace mode. It is an implicit - * parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log - * messages during execution. - */ -#undef FT_COMPONENT -#define FT_COMPONENT aflatin2 - - - FT_LOCAL_DEF( FT_Error ) - af_latin2_hints_compute_segments( AF_GlyphHints hints, - AF_Dimension dim ); - - FT_LOCAL_DEF( void ) - af_latin2_hints_link_segments( AF_GlyphHints hints, - AF_Dimension dim ); - - /*************************************************************************/ - /*************************************************************************/ - /***** *****/ - /***** L A T I N G L O B A L M E T R I C S *****/ - /***** *****/ - /*************************************************************************/ - /*************************************************************************/ - - FT_LOCAL_DEF( void ) - af_latin2_metrics_init_widths( AF_LatinMetrics metrics, - FT_Face face ) - { - /* scan the array of segments in each direction */ - AF_GlyphHintsRec hints[1]; - - - af_glyph_hints_init( hints, face->memory ); - - metrics->axis[AF_DIMENSION_HORZ].width_count = 0; - metrics->axis[AF_DIMENSION_VERT].width_count = 0; - - { - FT_Error error; - FT_UInt glyph_index; - int dim; - AF_LatinMetricsRec dummy[1]; - AF_Scaler scaler = &dummy->root.scaler; - - - glyph_index = FT_Get_Char_Index( - face, - metrics->root.style_class->standard_char ); - if ( glyph_index == 0 ) - goto Exit; - - error = FT_Load_Glyph( face, glyph_index, FT_LOAD_NO_SCALE ); - if ( error || face->glyph->outline.n_points <= 0 ) - goto Exit; - - FT_ZERO( dummy ); - - dummy->units_per_em = metrics->units_per_em; - scaler->x_scale = scaler->y_scale = 0x10000L; - scaler->x_delta = scaler->y_delta = 0; - scaler->face = face; - scaler->render_mode = FT_RENDER_MODE_NORMAL; - scaler->flags = 0; - - af_glyph_hints_rescale( hints, (AF_StyleMetrics)dummy ); - - error = af_glyph_hints_reload( hints, &face->glyph->outline ); - if ( error ) - goto Exit; - - for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ ) - { - AF_LatinAxis axis = &metrics->axis[dim]; - AF_AxisHints axhints = &hints->axis[dim]; - AF_Segment seg, limit, link; - FT_UInt num_widths = 0; - - - error = af_latin2_hints_compute_segments( hints, - (AF_Dimension)dim ); - if ( error ) - goto Exit; - - af_latin2_hints_link_segments( hints, - (AF_Dimension)dim ); - - seg = axhints->segments; - limit = seg + axhints->num_segments; - - for ( ; seg < limit; seg++ ) - { - link = seg->link; - - /* we only consider stem segments there! */ - if ( link && link->link == seg && link > seg ) - { - FT_Pos dist; - - - dist = seg->pos - link->pos; - if ( dist < 0 ) - dist = -dist; - - if ( num_widths < AF_LATIN_MAX_WIDTHS ) - axis->widths[num_widths++].org = dist; - } - } - - af_sort_widths( num_widths, axis->widths ); - axis->width_count = num_widths; - } - - Exit: - for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ ) - { - AF_LatinAxis axis = &metrics->axis[dim]; - FT_Pos stdw; - - - stdw = ( axis->width_count > 0 ) - ? axis->widths[0].org - : AF_LATIN_CONSTANT( metrics, 50 ); - - /* let's try 20% of the smallest width */ - axis->edge_distance_threshold = stdw / 5; - axis->standard_width = stdw; - axis->extra_light = 0; - } - } - - af_glyph_hints_done( hints ); - } - - - -#define AF_LATIN_MAX_TEST_CHARACTERS 12 - - - static const char af_latin2_blue_chars[AF_LATIN_MAX_BLUES] - [AF_LATIN_MAX_TEST_CHARACTERS+1] = - { - "THEZOCQS", - "HEZLOCUS", - "fijkdbh", - "xzroesc", - "xzroesc", - "pqgjy" - }; - - - static void - af_latin2_metrics_init_blues( AF_LatinMetrics metrics, - FT_Face face ) - { - FT_Pos flats [AF_LATIN_MAX_TEST_CHARACTERS]; - FT_Pos rounds[AF_LATIN_MAX_TEST_CHARACTERS]; - FT_Int num_flats; - FT_Int num_rounds; - FT_Int bb; - AF_LatinBlue blue; - FT_Error error; - AF_LatinAxis axis = &metrics->axis[AF_DIMENSION_VERT]; - FT_GlyphSlot glyph = face->glyph; - - - /* we compute the blues simply by loading each character from the */ - /* 'af_latin2_blue_chars[blues]' string, then compute its top-most or */ - /* bottom-most points (depending on `AF_IS_TOP_BLUE') */ - - FT_TRACE5(( "blue zones computation\n" - "======================\n\n" )); - - for ( bb = 0; bb < AF_LATIN_BLUE_MAX; bb++ ) - { - const char* p = af_latin2_blue_chars[bb]; - const char* limit = p + AF_LATIN_MAX_TEST_CHARACTERS; - FT_Pos* blue_ref; - FT_Pos* blue_shoot; - - - FT_TRACE5(( "blue zone %d:\n", bb )); - - num_flats = 0; - num_rounds = 0; - - for ( ; p < limit && *p; p++ ) - { - FT_UInt glyph_index; - FT_Int best_point, best_y, best_first, best_last; - FT_Vector* points; - FT_Bool round; - - - /* load the character in the face -- skip unknown or empty ones */ - glyph_index = FT_Get_Char_Index( face, (FT_UInt)*p ); - if ( glyph_index == 0 ) - continue; - - error = FT_Load_Glyph( face, glyph_index, FT_LOAD_NO_SCALE ); - if ( error || glyph->outline.n_points <= 0 ) - continue; - - /* now compute min or max point indices and coordinates */ - points = glyph->outline.points; - best_point = -1; - best_y = 0; /* make compiler happy */ - best_first = 0; /* ditto */ - best_last = 0; /* ditto */ - - { - FT_Int nn; - FT_Int first = 0; - FT_Int last = -1; - - - for ( nn = 0; nn < glyph->outline.n_contours; first = last+1, nn++ ) - { - FT_Int old_best_point = best_point; - FT_Int pp; - - - last = glyph->outline.contours[nn]; - - /* Avoid single-point contours since they are never rasterized. */ - /* In some fonts, they correspond to mark attachment points */ - /* which are way outside of the glyph's real outline. */ - if ( last <= first ) - continue; - - if ( AF_LATIN_IS_TOP_BLUE( bb ) ) - { - for ( pp = first; pp <= last; pp++ ) - if ( best_point < 0 || points[pp].y > best_y ) - { - best_point = pp; - best_y = points[pp].y; - } - } - else - { - for ( pp = first; pp <= last; pp++ ) - if ( best_point < 0 || points[pp].y < best_y ) - { - best_point = pp; - best_y = points[pp].y; - } - } - - if ( best_point != old_best_point ) - { - best_first = first; - best_last = last; - } - } - FT_TRACE5(( " %c %d", *p, best_y )); - } - - /* now check whether the point belongs to a straight or round */ - /* segment; we first need to find in which contour the extremum */ - /* lies, then inspect its previous and next points */ - if ( best_point >= 0 ) - { - FT_Pos best_x = points[best_point].x; - FT_Int start, end, prev, next; - FT_Pos dist; - - - /* now look for the previous and next points that are not on the */ - /* same Y coordinate. Threshold the `closeness'... */ - start = end = best_point; - - do - { - prev = start - 1; - if ( prev < best_first ) - prev = best_last; - - dist = FT_ABS( points[prev].y - best_y ); - /* accept a small distance or a small angle (both values are */ - /* heuristic; value 20 corresponds to approx. 2.9 degrees) */ - if ( dist > 5 ) - if ( FT_ABS( points[prev].x - best_x ) <= 20 * dist ) - break; - - start = prev; - - } while ( start != best_point ); - - do - { - next = end + 1; - if ( next > best_last ) - next = best_first; - - dist = FT_ABS( points[next].y - best_y ); - if ( dist > 5 ) - if ( FT_ABS( points[next].x - best_x ) <= 20 * dist ) - break; - - end = next; - - } while ( end != best_point ); - - /* now, set the `round' flag depending on the segment's kind */ - round = FT_BOOL( - FT_CURVE_TAG( glyph->outline.tags[start] ) != FT_CURVE_TAG_ON || - FT_CURVE_TAG( glyph->outline.tags[ end ] ) != FT_CURVE_TAG_ON ); - - FT_TRACE5(( " (%s)\n", round ? "round" : "flat" )); - } - - if ( round ) - rounds[num_rounds++] = best_y; - else - flats[num_flats++] = best_y; - } - - if ( num_flats == 0 && num_rounds == 0 ) - { - /* - * we couldn't find a single glyph to compute this blue zone, - * we will simply ignore it then - */ - FT_TRACE5(( " empty\n" )); - continue; - } - - /* we have computed the contents of the `rounds' and `flats' tables, */ - /* now determine the reference and overshoot position of the blue -- */ - /* we simply take the median value after a simple sort */ - af_sort_pos( num_rounds, rounds ); - af_sort_pos( num_flats, flats ); - - blue = & axis->blues[axis->blue_count]; - blue_ref = & blue->ref.org; - blue_shoot = & blue->shoot.org; - - axis->blue_count++; - - if ( num_flats == 0 ) - { - *blue_ref = - *blue_shoot = rounds[num_rounds / 2]; - } - else if ( num_rounds == 0 ) - { - *blue_ref = - *blue_shoot = flats[num_flats / 2]; - } - else - { - *blue_ref = flats[num_flats / 2]; - *blue_shoot = rounds[num_rounds / 2]; - } - - /* there are sometimes problems: if the overshoot position of top */ - /* zones is under its reference position, or the opposite for bottom */ - /* zones. We must thus check everything there and correct the errors */ - if ( *blue_shoot != *blue_ref ) - { - FT_Pos ref = *blue_ref; - FT_Pos shoot = *blue_shoot; - FT_Bool over_ref = FT_BOOL( shoot > ref ); - - - if ( AF_LATIN_IS_TOP_BLUE( bb ) ^ over_ref ) - { - *blue_ref = - *blue_shoot = ( shoot + ref ) / 2; - - FT_TRACE5(( " [overshoot smaller than reference," - " taking mean value]\n" )); - } - } - - blue->flags = 0; - if ( AF_LATIN_IS_TOP_BLUE( bb ) ) - blue->flags |= AF_LATIN_BLUE_TOP; - - /* - * The following flag is used later to adjust the y and x scales - * in order to optimize the pixel grid alignment of the top of small - * letters. - */ - if ( AF_LATIN_IS_X_HEIGHT_BLUE( bb ) ) - blue->flags |= AF_LATIN_BLUE_ADJUSTMENT; - - FT_TRACE5(( " -> reference = %ld\n" - " overshoot = %ld\n", - *blue_ref, *blue_shoot )); - } - - return; - } - - - FT_LOCAL_DEF( void ) - af_latin2_metrics_check_digits( AF_LatinMetrics metrics, - FT_Face face ) - { - FT_UInt i; - FT_Bool started = 0, same_width = 1; - FT_Fixed advance, old_advance = 0; - - - /* check whether all ASCII digits have the same advance width; */ - /* digit `0' is 0x30 in all supported charmaps */ - for ( i = 0x30; i <= 0x39; i++ ) - { - FT_UInt glyph_index; - - - glyph_index = FT_Get_Char_Index( face, i ); - if ( glyph_index == 0 ) - continue; - - if ( FT_Get_Advance( face, glyph_index, - FT_LOAD_NO_SCALE | - FT_LOAD_NO_HINTING | - FT_LOAD_IGNORE_TRANSFORM, - &advance ) ) - continue; - - if ( started ) - { - if ( advance != old_advance ) - { - same_width = 0; - break; - } - } - else - { - old_advance = advance; - started = 1; - } - } - - metrics->root.digits_have_same_width = same_width; - } - - - FT_LOCAL_DEF( FT_Error ) - af_latin2_metrics_init( AF_LatinMetrics metrics, - FT_Face face ) - { - FT_Error error = FT_Err_Ok; - FT_CharMap oldmap = face->charmap; - FT_UInt ee; - - static const FT_Encoding latin_encodings[] = - { - FT_ENCODING_UNICODE, - FT_ENCODING_APPLE_ROMAN, - FT_ENCODING_ADOBE_STANDARD, - FT_ENCODING_ADOBE_LATIN_1, - FT_ENCODING_NONE /* end of list */ - }; - - - metrics->units_per_em = face->units_per_EM; - - /* do we have a latin charmap in there? */ - for ( ee = 0; latin_encodings[ee] != FT_ENCODING_NONE; ee++ ) - { - error = FT_Select_Charmap( face, latin_encodings[ee] ); - if ( !error ) - break; - } - - if ( !error ) - { - af_latin2_metrics_init_widths( metrics, face ); - af_latin2_metrics_init_blues( metrics, face ); - af_latin2_metrics_check_digits( metrics, face ); - } - - FT_Set_Charmap( face, oldmap ); - return FT_Err_Ok; - } - - - static void - af_latin2_metrics_scale_dim( AF_LatinMetrics metrics, - AF_Scaler scaler, - AF_Dimension dim ) - { - FT_Fixed scale; - FT_Pos delta; - AF_LatinAxis axis; - FT_UInt nn; - - - if ( dim == AF_DIMENSION_HORZ ) - { - scale = scaler->x_scale; - delta = scaler->x_delta; - } - else - { - scale = scaler->y_scale; - delta = scaler->y_delta; - } - - axis = &metrics->axis[dim]; - - if ( axis->org_scale == scale && axis->org_delta == delta ) - return; - - axis->org_scale = scale; - axis->org_delta = delta; - - /* - * correct Y scale to optimize the alignment of the top of small - * letters to the pixel grid - */ - if ( dim == AF_DIMENSION_VERT ) - { - AF_LatinAxis vaxis = &metrics->axis[AF_DIMENSION_VERT]; - AF_LatinBlue blue = NULL; - - - for ( nn = 0; nn < vaxis->blue_count; nn++ ) - { - if ( vaxis->blues[nn].flags & AF_LATIN_BLUE_ADJUSTMENT ) - { - blue = &vaxis->blues[nn]; - break; - } - } - - if ( blue ) - { - FT_Pos scaled; - FT_Pos threshold; - FT_Pos fitted; - FT_UInt limit; - FT_UInt ppem; - - - scaled = FT_MulFix( blue->shoot.org, scaler->y_scale ); - ppem = metrics->root.scaler.face->size->metrics.x_ppem; - limit = metrics->root.globals->increase_x_height; - threshold = 40; - - /* if the `increase-x-height' property is active, */ - /* we round up much more often */ - if ( limit && - ppem <= limit && - ppem >= AF_PROP_INCREASE_X_HEIGHT_MIN ) - threshold = 52; - - fitted = ( scaled + threshold ) & ~63; - -#if 1 - if ( scaled != fitted ) - { - scale = FT_MulDiv( scale, fitted, scaled ); - FT_TRACE5(( "== scaled x-top = %.2g" - " fitted = %.2g, scaling = %.4g\n", - scaled / 64.0, fitted / 64.0, - ( fitted * 1.0 ) / scaled )); - } -#endif - } - } - - axis->scale = scale; - axis->delta = delta; - - if ( dim == AF_DIMENSION_HORZ ) - { - metrics->root.scaler.x_scale = scale; - metrics->root.scaler.x_delta = delta; - } - else - { - metrics->root.scaler.y_scale = scale; - metrics->root.scaler.y_delta = delta; - } - - /* scale the standard widths */ - for ( nn = 0; nn < axis->width_count; nn++ ) - { - AF_Width width = axis->widths + nn; - - - width->cur = FT_MulFix( width->org, scale ); - width->fit = width->cur; - } - - /* an extra-light axis corresponds to a standard width that is */ - /* smaller than 5/8 pixels */ - axis->extra_light = - FT_BOOL( FT_MulFix( axis->standard_width, scale ) < 32 + 8 ); - - if ( dim == AF_DIMENSION_VERT ) - { - /* scale the blue zones */ - for ( nn = 0; nn < axis->blue_count; nn++ ) - { - AF_LatinBlue blue = &axis->blues[nn]; - FT_Pos dist; - - - blue->ref.cur = FT_MulFix( blue->ref.org, scale ) + delta; - blue->ref.fit = blue->ref.cur; - blue->shoot.cur = FT_MulFix( blue->shoot.org, scale ) + delta; - blue->shoot.fit = blue->shoot.cur; - blue->flags &= ~AF_LATIN_BLUE_ACTIVE; - - /* a blue zone is only active if it is less than 3/4 pixels tall */ - dist = FT_MulFix( blue->ref.org - blue->shoot.org, scale ); - if ( dist <= 48 && dist >= -48 ) - { - FT_Pos delta1, delta2; - - delta1 = blue->shoot.org - blue->ref.org; - delta2 = delta1; - if ( delta1 < 0 ) - delta2 = -delta2; - - delta2 = FT_MulFix( delta2, scale ); - - if ( delta2 < 32 ) - delta2 = 0; - else if ( delta2 < 64 ) - delta2 = 32 + ( ( ( delta2 - 32 ) + 16 ) & ~31 ); - else - delta2 = FT_PIX_ROUND( delta2 ); - - if ( delta1 < 0 ) - delta2 = -delta2; - - blue->ref.fit = FT_PIX_ROUND( blue->ref.cur ); - blue->shoot.fit = blue->ref.fit + delta2; - - FT_TRACE5(( ">> activating blue zone %d:" - " ref.cur=%.2g ref.fit=%.2g" - " shoot.cur=%.2g shoot.fit=%.2g\n", - nn, blue->ref.cur / 64.0, blue->ref.fit / 64.0, - blue->shoot.cur / 64.0, blue->shoot.fit / 64.0 )); - - blue->flags |= AF_LATIN_BLUE_ACTIVE; - } - } - } - } - - - FT_LOCAL_DEF( void ) - af_latin2_metrics_scale( AF_LatinMetrics metrics, - AF_Scaler scaler ) - { - metrics->root.scaler.render_mode = scaler->render_mode; - metrics->root.scaler.face = scaler->face; - metrics->root.scaler.flags = scaler->flags; - - af_latin2_metrics_scale_dim( metrics, scaler, AF_DIMENSION_HORZ ); - af_latin2_metrics_scale_dim( metrics, scaler, AF_DIMENSION_VERT ); - } - - - /* Extract standard_width from writing system/script specific */ - /* metrics class. */ - - FT_LOCAL_DEF( void ) - af_latin2_get_standard_widths( AF_LatinMetrics metrics, - FT_Pos* stdHW, - FT_Pos* stdVW ) - { - if ( stdHW ) - *stdHW = metrics->axis[AF_DIMENSION_VERT].standard_width; - - if ( stdVW ) - *stdVW = metrics->axis[AF_DIMENSION_HORZ].standard_width; - } - - - /*************************************************************************/ - /*************************************************************************/ - /***** *****/ - /***** L A T I N G L Y P H A N A L Y S I S *****/ - /***** *****/ - /*************************************************************************/ - /*************************************************************************/ - -#define SORT_SEGMENTS - - FT_LOCAL_DEF( FT_Error ) - af_latin2_hints_compute_segments( AF_GlyphHints hints, - AF_Dimension dim ) - { - AF_AxisHints axis = &hints->axis[dim]; - FT_Memory memory = hints->memory; - FT_Error error = FT_Err_Ok; - AF_Segment segment = NULL; - AF_SegmentRec seg0; - AF_Point* contour = hints->contours; - AF_Point* contour_limit = contour + hints->num_contours; - AF_Direction major_dir, segment_dir; - - - FT_ZERO( &seg0 ); - seg0.score = 32000; - seg0.flags = AF_EDGE_NORMAL; - - major_dir = (AF_Direction)FT_ABS( axis->major_dir ); - segment_dir = major_dir; - - axis->num_segments = 0; - - /* set up (u,v) in each point */ - if ( dim == AF_DIMENSION_HORZ ) - { - AF_Point point = hints->points; - AF_Point limit = point + hints->num_points; - - - for ( ; point < limit; point++ ) - { - point->u = point->fx; - point->v = point->fy; - } - } - else - { - AF_Point point = hints->points; - AF_Point limit = point + hints->num_points; - - - for ( ; point < limit; point++ ) - { - point->u = point->fy; - point->v = point->fx; - } - } - - /* do each contour separately */ - for ( ; contour < contour_limit; contour++ ) - { - AF_Point point = contour[0]; - AF_Point start = point; - AF_Point last = point->prev; - - - if ( point == last ) /* skip singletons -- just in case */ - continue; - - /* already on an edge ?, backtrack to find its start */ - if ( FT_ABS( point->in_dir ) == major_dir ) - { - point = point->prev; - - while ( point->in_dir == start->in_dir ) - point = point->prev; - } - else /* otherwise, find first segment start, if any */ - { - while ( FT_ABS( point->out_dir ) != major_dir ) - { - point = point->next; - - if ( point == start ) - goto NextContour; - } - } - - start = point; - - for (;;) - { - AF_Point first; - FT_Pos min_u, min_v, max_u, max_v; - - /* we're at the start of a new segment */ - FT_ASSERT( FT_ABS( point->out_dir ) == major_dir && - point->in_dir != point->out_dir ); - first = point; - - min_u = max_u = point->u; - min_v = max_v = point->v; - - point = point->next; - - while ( point->out_dir == first->out_dir ) - { - point = point->next; - - if ( point->u < min_u ) - min_u = point->u; - - if ( point->u > max_u ) - max_u = point->u; - } - - if ( point->v < min_v ) - min_v = point->v; - - if ( point->v > max_v ) - max_v = point->v; - - /* record new segment */ - error = af_axis_hints_new_segment( axis, memory, &segment ); - if ( error ) - goto Exit; - - segment[0] = seg0; - segment->dir = first->out_dir; - segment->first = first; - segment->last = point; - segment->pos = (FT_Short)( ( min_u + max_u ) >> 1 ); - segment->min_coord = (FT_Short) min_v; - segment->max_coord = (FT_Short) max_v; - segment->height = (FT_Short)( max_v - min_v ); - - /* a segment is round if it doesn't have successive */ - /* on-curve points. */ - { - AF_Point pt = first; - AF_Point last = point; - FT_UInt f0 = pt->flags & AF_FLAG_CONTROL; - FT_UInt f1; - - - segment->flags &= ~AF_EDGE_ROUND; - - for ( ; pt != last; f0 = f1 ) - { - pt = pt->next; - f1 = pt->flags & AF_FLAG_CONTROL; - - if ( !f0 && !f1 ) - break; - - if ( pt == last ) - segment->flags |= AF_EDGE_ROUND; - } - } - - /* this can happen in the case of a degenerate contour - * e.g. a 2-point vertical contour - */ - if ( point == start ) - break; - - /* jump to the start of the next segment, if any */ - while ( FT_ABS( point->out_dir ) != major_dir ) - { - point = point->next; - - if ( point == start ) - goto NextContour; - } - } - - NextContour: - ; - } /* contours */ - - /* now slightly increase the height of segments when this makes */ - /* sense -- this is used to better detect and ignore serifs */ - { - AF_Segment segments = axis->segments; - AF_Segment segments_end = segments + axis->num_segments; - - - for ( segment = segments; segment < segments_end; segment++ ) - { - AF_Point first = segment->first; - AF_Point last = segment->last; - AF_Point p; - FT_Pos first_v = first->v; - FT_Pos last_v = last->v; - - - if ( first_v < last_v ) - { - p = first->prev; - if ( p->v < first_v ) - segment->height = (FT_Short)( segment->height + - ( ( first_v - p->v ) >> 1 ) ); - - p = last->next; - if ( p->v > last_v ) - segment->height = (FT_Short)( segment->height + - ( ( p->v - last_v ) >> 1 ) ); - } - else - { - p = first->prev; - if ( p->v > first_v ) - segment->height = (FT_Short)( segment->height + - ( ( p->v - first_v ) >> 1 ) ); - - p = last->next; - if ( p->v < last_v ) - segment->height = (FT_Short)( segment->height + - ( ( last_v - p->v ) >> 1 ) ); - } - } - } - -#ifdef AF_SORT_SEGMENTS - /* place all segments with a negative direction to the start - * of the array, used to speed up segment linking later... - */ - { - AF_Segment segments = axis->segments; - FT_UInt count = axis->num_segments; - FT_UInt ii, jj; - - for ( ii = 0; ii < count; ii++ ) - { - if ( segments[ii].dir > 0 ) - { - for ( jj = ii + 1; jj < count; jj++ ) - { - if ( segments[jj].dir < 0 ) - { - AF_SegmentRec tmp; - - - tmp = segments[ii]; - segments[ii] = segments[jj]; - segments[jj] = tmp; - - break; - } - } - - if ( jj == count ) - break; - } - } - axis->mid_segments = ii; - } -#endif - - Exit: - return error; - } - - - FT_LOCAL_DEF( void ) - af_latin2_hints_link_segments( AF_GlyphHints hints, - AF_Dimension dim ) - { - AF_AxisHints axis = &hints->axis[dim]; - AF_Segment segments = axis->segments; - AF_Segment segment_limit = segments + axis->num_segments; -#ifdef AF_SORT_SEGMENTS - AF_Segment segment_mid = segments + axis->mid_segments; -#endif - FT_Pos len_threshold, len_score; - AF_Segment seg1, seg2; - - - len_threshold = AF_LATIN_CONSTANT( hints->metrics, 8 ); - if ( len_threshold == 0 ) - len_threshold = 1; - - len_score = AF_LATIN_CONSTANT( hints->metrics, 6000 ); - -#ifdef AF_SORT_SEGMENTS - for ( seg1 = segments; seg1 < segment_mid; seg1++ ) - { - if ( seg1->dir != axis->major_dir ) - continue; - - for ( seg2 = segment_mid; seg2 < segment_limit; seg2++ ) -#else - /* now compare each segment to the others */ - for ( seg1 = segments; seg1 < segment_limit; seg1++ ) - { - if ( seg1->dir != axis->major_dir ) - continue; - - for ( seg2 = segments; seg2 < segment_limit; seg2++ ) - if ( seg1->dir + seg2->dir == 0 && seg2->pos > seg1->pos ) -#endif - { - FT_Pos pos1 = seg1->pos; - FT_Pos pos2 = seg2->pos; - FT_Pos dist = pos2 - pos1; - - - if ( dist < 0 ) - continue; - - { - FT_Pos min = seg1->min_coord; - FT_Pos max = seg1->max_coord; - FT_Pos len, score; - - - if ( min < seg2->min_coord ) - min = seg2->min_coord; - - if ( max > seg2->max_coord ) - max = seg2->max_coord; - - len = max - min; - if ( len >= len_threshold ) - { - score = dist + len_score / len; - if ( score < seg1->score ) - { - seg1->score = score; - seg1->link = seg2; - } - - if ( score < seg2->score ) - { - seg2->score = score; - seg2->link = seg1; - } - } - } - } - } -#if 0 - } -#endif - - /* now, compute the `serif' segments */ - for ( seg1 = segments; seg1 < segment_limit; seg1++ ) - { - seg2 = seg1->link; - - if ( seg2 ) - { - if ( seg2->link != seg1 ) - { - seg1->link = NULL; - seg1->serif = seg2->link; - } - } - } - } - - - FT_LOCAL_DEF( FT_Error ) - af_latin2_hints_compute_edges( AF_GlyphHints hints, - AF_Dimension dim ) - { - AF_AxisHints axis = &hints->axis[dim]; - FT_Error error = FT_Err_Ok; - FT_Memory memory = hints->memory; - AF_LatinAxis laxis = &((AF_LatinMetrics)hints->metrics)->axis[dim]; - - AF_Segment segments = axis->segments; - AF_Segment segment_limit = segments + axis->num_segments; - AF_Segment seg; - - AF_Direction up_dir; - FT_Fixed scale; - FT_Pos edge_distance_threshold; - FT_Pos segment_length_threshold; - - - axis->num_edges = 0; - - scale = ( dim == AF_DIMENSION_HORZ ) ? hints->x_scale - : hints->y_scale; - - up_dir = ( dim == AF_DIMENSION_HORZ ) ? AF_DIR_UP - : AF_DIR_RIGHT; - - /* - * We want to ignore very small (mostly serif) segments, we do that - * by ignoring those that whose length is less than a given fraction - * of the standard width. If there is no standard width, we ignore - * those that are less than a given size in pixels - * - * also, unlink serif segments that are linked to segments farther - * than 50% of the standard width - */ - if ( dim == AF_DIMENSION_HORZ ) - { - if ( laxis->width_count > 0 ) - segment_length_threshold = ( laxis->standard_width * 10 ) >> 4; - else - segment_length_threshold = FT_DivFix( 64, hints->y_scale ); - } - else - segment_length_threshold = 0; - - /********************************************************************** - * - * We will begin by generating a sorted table of edges for the - * current direction. To do so, we simply scan each segment and try - * to find an edge in our table that corresponds to its position. - * - * If no edge is found, we create and insert a new edge in the - * sorted table. Otherwise, we simply add the segment to the edge's - * list which will be processed in the second step to compute the - * edge's properties. - * - * Note that the edges table is sorted along the segment/edge - * position. - * - */ - - edge_distance_threshold = FT_MulFix( laxis->edge_distance_threshold, - scale ); - if ( edge_distance_threshold > 64 / 4 ) - edge_distance_threshold = 64 / 4; - - edge_distance_threshold = FT_DivFix( edge_distance_threshold, - scale ); - - for ( seg = segments; seg < segment_limit; seg++ ) - { - AF_Edge found = NULL; - FT_Int ee; - - - if ( seg->height < segment_length_threshold ) - continue; - - /* A special case for serif edges: If they are smaller than */ - /* 1.5 pixels we ignore them. */ - if ( seg->serif ) - { - FT_Pos dist = seg->serif->pos - seg->pos; - - - if ( dist < 0 ) - dist = -dist; - - if ( dist >= laxis->standard_width >> 1 ) - { - /* unlink this serif, it is too distant from its reference stem */ - seg->serif = NULL; - } - else if ( 2*seg->height < 3 * segment_length_threshold ) - continue; - } - - /* look for an edge corresponding to the segment */ - for ( ee = 0; ee < axis->num_edges; ee++ ) - { - AF_Edge edge = axis->edges + ee; - FT_Pos dist; - - - dist = seg->pos - edge->fpos; - if ( dist < 0 ) - dist = -dist; - - if ( dist < edge_distance_threshold && edge->dir == seg->dir ) - { - found = edge; - break; - } - } - - if ( !found ) - { - AF_Edge edge; - - - /* insert a new edge in the list and */ - /* sort according to the position */ - error = af_axis_hints_new_edge( axis, seg->pos, seg->dir, 0, - memory, &edge ); - if ( error ) - goto Exit; - - /* add the segment to the new edge's list */ - FT_ZERO( edge ); - - edge->first = seg; - edge->last = seg; - edge->dir = seg->dir; - edge->fpos = seg->pos; - edge->opos = FT_MulFix( seg->pos, scale ); - edge->pos = edge->opos; - seg->edge_next = seg; - } - else - { - /* if an edge was found, simply add the segment to the edge's */ - /* list */ - seg->edge_next = found->first; - found->last->edge_next = seg; - found->last = seg; - } - } - - - /********************************************************************** - * - * Good, we will now compute each edge's properties according to - * segments found on its position. Basically, these are: - * - * - edge's main direction - * - stem edge, serif edge or both (which defaults to stem then) - * - rounded edge, straight or both (which defaults to straight) - * - link for edge - * - */ - - /* first of all, set the `edge' field in each segment -- this is */ - /* required in order to compute edge links */ - - /* - * Note that removing this loop and setting the `edge' field of each - * segment directly in the code above slows down execution speed for - * some reasons on platforms like the Sun. - */ - { - AF_Edge edges = axis->edges; - AF_Edge edge_limit = edges + axis->num_edges; - AF_Edge edge; - - - for ( edge = edges; edge < edge_limit; edge++ ) - { - seg = edge->first; - if ( seg ) - do - { - seg->edge = edge; - seg = seg->edge_next; - - } while ( seg != edge->first ); - } - - /* now, compute each edge properties */ - for ( edge = edges; edge < edge_limit; edge++ ) - { - FT_Int is_round = 0; /* does it contain round segments? */ - FT_Int is_straight = 0; /* does it contain straight segments? */ -#if 0 - FT_Pos ups = 0; /* number of upwards segments */ - FT_Pos downs = 0; /* number of downwards segments */ -#endif - - - seg = edge->first; - - do - { - FT_Bool is_serif; - - - /* check for roundness of segment */ - if ( seg->flags & AF_EDGE_ROUND ) - is_round++; - else - is_straight++; - -#if 0 - /* check for segment direction */ - if ( seg->dir == up_dir ) - ups += seg->max_coord-seg->min_coord; - else - downs += seg->max_coord-seg->min_coord; -#endif - - /* check for links -- if seg->serif is set, then seg->link must */ - /* be ignored */ - is_serif = FT_BOOL( seg->serif && - seg->serif->edge && - seg->serif->edge != edge ); - - if ( ( seg->link && seg->link->edge ) || is_serif ) - { - AF_Edge edge2; - AF_Segment seg2; - - - edge2 = edge->link; - seg2 = seg->link; - - if ( is_serif ) - { - seg2 = seg->serif; - edge2 = edge->serif; - } - - if ( edge2 ) - { - FT_Pos edge_delta; - FT_Pos seg_delta; - - - edge_delta = edge->fpos - edge2->fpos; - if ( edge_delta < 0 ) - edge_delta = -edge_delta; - - seg_delta = seg->pos - seg2->pos; - if ( seg_delta < 0 ) - seg_delta = -seg_delta; - - if ( seg_delta < edge_delta ) - edge2 = seg2->edge; - } - else - edge2 = seg2->edge; - - if ( is_serif ) - { - edge->serif = edge2; - edge2->flags |= AF_EDGE_SERIF; - } - else - edge->link = edge2; - } - - seg = seg->edge_next; - - } while ( seg != edge->first ); - - /* set the round/straight flags */ - edge->flags = AF_EDGE_NORMAL; - - if ( is_round > 0 && is_round >= is_straight ) - edge->flags |= AF_EDGE_ROUND; - -#if 0 - /* set the edge's main direction */ - edge->dir = AF_DIR_NONE; - - if ( ups > downs ) - edge->dir = (FT_Char)up_dir; - - else if ( ups < downs ) - edge->dir = (FT_Char)-up_dir; - - else if ( ups == downs ) - edge->dir = 0; /* both up and down! */ -#endif - - /* gets rid of serifs if link is set */ - /* XXX: This gets rid of many unpleasant artefacts! */ - /* Example: the `c' in cour.pfa at size 13 */ - - if ( edge->serif && edge->link ) - edge->serif = NULL; - } - } - - Exit: - return error; - } - - - FT_LOCAL_DEF( FT_Error ) - af_latin2_hints_detect_features( AF_GlyphHints hints, - AF_Dimension dim ) - { - FT_Error error; - - - error = af_latin2_hints_compute_segments( hints, dim ); - if ( !error ) - { - af_latin2_hints_link_segments( hints, dim ); - - error = af_latin2_hints_compute_edges( hints, dim ); - } - return error; - } - - - static void - af_latin2_hints_compute_blue_edges( AF_GlyphHints hints, - AF_LatinMetrics metrics ) - { - AF_AxisHints axis = &hints->axis[AF_DIMENSION_VERT]; - AF_Edge edge = axis->edges; - AF_Edge edge_limit = edge + axis->num_edges; - AF_LatinAxis latin = &metrics->axis[AF_DIMENSION_VERT]; - FT_Fixed scale = latin->scale; - FT_Pos best_dist0; /* initial threshold */ - - - /* compute the initial threshold as a fraction of the EM size */ - best_dist0 = FT_MulFix( metrics->units_per_em / 40, scale ); - - if ( best_dist0 > 64 / 2 ) - best_dist0 = 64 / 2; - - /* compute which blue zones are active, i.e. have their scaled */ - /* size < 3/4 pixels */ - - /* for each horizontal edge search the blue zone which is closest */ - for ( ; edge < edge_limit; edge++ ) - { - FT_Int bb; - AF_Width best_blue = NULL; - FT_Pos best_dist = best_dist0; - - for ( bb = 0; bb < AF_LATIN_BLUE_MAX; bb++ ) - { - AF_LatinBlue blue = latin->blues + bb; - FT_Bool is_top_blue, is_major_dir; - - - /* skip inactive blue zones (i.e., those that are too small) */ - if ( !( blue->flags & AF_LATIN_BLUE_ACTIVE ) ) - continue; - - /* if it is a top zone, check for right edges -- if it is a bottom */ - /* zone, check for left edges */ - /* */ - /* of course, that's for TrueType */ - is_top_blue = (FT_Byte)( ( blue->flags & AF_LATIN_BLUE_TOP ) != 0 ); - is_major_dir = FT_BOOL( edge->dir == axis->major_dir ); - - /* if it is a top zone, the edge must be against the major */ - /* direction; if it is a bottom zone, it must be in the major */ - /* direction */ - if ( is_top_blue ^ is_major_dir ) - { - FT_Pos dist; - AF_Width compare; - - - /* if it's a rounded edge, compare it to the overshoot position */ - /* if it's a flat edge, compare it to the reference position */ - if ( edge->flags & AF_EDGE_ROUND ) - compare = &blue->shoot; - else - compare = &blue->ref; - - dist = edge->fpos - compare->org; - if ( dist < 0 ) - dist = -dist; - - dist = FT_MulFix( dist, scale ); - if ( dist < best_dist ) - { - best_dist = dist; - best_blue = compare; - } - -#if 0 - /* now, compare it to the overshoot position if the edge is */ - /* rounded, and if the edge is over the reference position of a */ - /* top zone, or under the reference position of a bottom zone */ - if ( edge->flags & AF_EDGE_ROUND && dist != 0 ) - { - FT_Bool is_under_ref = FT_BOOL( edge->fpos < blue->ref.org ); - - - if ( is_top_blue ^ is_under_ref ) - { - blue = latin->blues + bb; - dist = edge->fpos - blue->shoot.org; - if ( dist < 0 ) - dist = -dist; - - dist = FT_MulFix( dist, scale ); - if ( dist < best_dist ) - { - best_dist = dist; - best_blue = & blue->shoot; - } - } - } -#endif - } - } - - if ( best_blue ) - edge->blue_edge = best_blue; - } - } - - - static FT_Error - af_latin2_hints_init( AF_GlyphHints hints, - AF_LatinMetrics metrics ) - { - FT_Render_Mode mode; - FT_UInt32 scaler_flags, other_flags; - FT_Face face = metrics->root.scaler.face; - - - af_glyph_hints_rescale( hints, (AF_StyleMetrics)metrics ); - - /* - * correct x_scale and y_scale if needed, since they may have - * been modified `af_latin2_metrics_scale_dim' above - */ - hints->x_scale = metrics->axis[AF_DIMENSION_HORZ].scale; - hints->x_delta = metrics->axis[AF_DIMENSION_HORZ].delta; - hints->y_scale = metrics->axis[AF_DIMENSION_VERT].scale; - hints->y_delta = metrics->axis[AF_DIMENSION_VERT].delta; - - /* compute flags depending on render mode, etc. */ - mode = metrics->root.scaler.render_mode; - -#if 0 /* #ifdef AF_CONFIG_OPTION_USE_WARPER */ - if ( mode == FT_RENDER_MODE_LCD || mode == FT_RENDER_MODE_LCD_V ) - metrics->root.scaler.render_mode = mode = FT_RENDER_MODE_NORMAL; -#endif - - scaler_flags = hints->scaler_flags; - other_flags = 0; - - /* - * We snap the width of vertical stems for the monochrome and - * horizontal LCD rendering targets only. - */ - if ( mode == FT_RENDER_MODE_MONO || mode == FT_RENDER_MODE_LCD ) - other_flags |= AF_LATIN_HINTS_HORZ_SNAP; - - /* - * We snap the width of horizontal stems for the monochrome and - * vertical LCD rendering targets only. - */ - if ( mode == FT_RENDER_MODE_MONO || mode == FT_RENDER_MODE_LCD_V ) - other_flags |= AF_LATIN_HINTS_VERT_SNAP; - - /* - * We adjust stems to full pixels unless in `light' or `lcd' mode. - */ - if ( mode != FT_RENDER_MODE_LIGHT && mode != FT_RENDER_MODE_LCD ) - other_flags |= AF_LATIN_HINTS_STEM_ADJUST; - - if ( mode == FT_RENDER_MODE_MONO ) - other_flags |= AF_LATIN_HINTS_MONO; - - /* - * In `light' or `lcd' mode we disable horizontal hinting completely. - * We also do it if the face is italic. - */ - if ( mode == FT_RENDER_MODE_LIGHT || mode == FT_RENDER_MODE_LCD || - ( face->style_flags & FT_STYLE_FLAG_ITALIC ) != 0 ) - scaler_flags |= AF_SCALER_FLAG_NO_HORIZONTAL; - -#ifdef AF_CONFIG_OPTION_USE_WARPER - /* get (global) warper flag */ - if ( !metrics->root.globals->module->warping ) - scaler_flags |= AF_SCALER_FLAG_NO_WARPER; -#endif - - hints->scaler_flags = scaler_flags; - hints->other_flags = other_flags; - - return 0; - } - - - /*************************************************************************/ - /*************************************************************************/ - /***** *****/ - /***** L A T I N G L Y P H G R I D - F I T T I N G *****/ - /***** *****/ - /*************************************************************************/ - /*************************************************************************/ - - /* snap a given width in scaled coordinates to one of the */ - /* current standard widths */ - - static FT_Pos - af_latin2_snap_width( AF_Width widths, - FT_UInt count, - FT_Pos width ) - { - FT_UInt n; - FT_Pos best = 64 + 32 + 2; - FT_Pos reference = width; - FT_Pos scaled; - - - for ( n = 0; n < count; n++ ) - { - FT_Pos w; - FT_Pos dist; - - - w = widths[n].cur; - dist = width - w; - if ( dist < 0 ) - dist = -dist; - if ( dist < best ) - { - best = dist; - reference = w; - } - } - - scaled = FT_PIX_ROUND( reference ); - - if ( width >= reference ) - { - if ( width < scaled + 48 ) - width = reference; - } - else - { - if ( width > scaled - 48 ) - width = reference; - } - - return width; - } - - - /* compute the snapped width of a given stem */ - - static FT_Pos - af_latin2_compute_stem_width( AF_GlyphHints hints, - AF_Dimension dim, - FT_Pos width, - FT_UInt base_flags, - FT_UInt stem_flags ) - { - AF_LatinMetrics metrics = (AF_LatinMetrics) hints->metrics; - AF_LatinAxis axis = & metrics->axis[dim]; - FT_Pos dist = width; - FT_Int sign = 0; - FT_Int vertical = ( dim == AF_DIMENSION_VERT ); - - FT_UNUSED( base_flags ); - - - if ( !AF_LATIN_HINTS_DO_STEM_ADJUST( hints ) || - axis->extra_light ) - return width; - - if ( dist < 0 ) - { - dist = -width; - sign = 1; - } - - if ( ( vertical && !AF_LATIN_HINTS_DO_VERT_SNAP( hints ) ) || - ( !vertical && !AF_LATIN_HINTS_DO_HORZ_SNAP( hints ) ) ) - { - /* smooth hinting process: very lightly quantize the stem width */ - - /* leave the widths of serifs alone */ - - if ( ( stem_flags & AF_EDGE_SERIF ) && vertical && ( dist < 3 * 64 ) ) - goto Done_Width; - -#if 0 - else if ( ( base_flags & AF_EDGE_ROUND ) ) - { - if ( dist < 80 ) - dist = 64; - } - else if ( dist < 56 ) - dist = 56; -#endif - if ( axis->width_count > 0 ) - { - FT_Pos delta; - - - /* compare to standard width */ - if ( axis->width_count > 0 ) - { - delta = dist - axis->widths[0].cur; - - if ( delta < 0 ) - delta = -delta; - - if ( delta < 40 ) - { - dist = axis->widths[0].cur; - if ( dist < 48 ) - dist = 48; - - goto Done_Width; - } - } - - if ( dist < 3 * 64 ) - { - delta = dist & 63; - dist &= -64; - - if ( delta < 10 ) - dist += delta; - - else if ( delta < 32 ) - dist += 10; - - else if ( delta < 54 ) - dist += 54; - - else - dist += delta; - } - else - dist = ( dist + 32 ) & ~63; - } - } - else - { - /* strong hinting process: snap the stem width to integer pixels */ - FT_Pos org_dist = dist; - - - dist = af_latin2_snap_width( axis->widths, axis->width_count, dist ); - - if ( vertical ) - { - /* in the case of vertical hinting, always round */ - /* the stem heights to integer pixels */ - - if ( dist >= 64 ) - dist = ( dist + 16 ) & ~63; - else - dist = 64; - } - else - { - if ( AF_LATIN_HINTS_DO_MONO( hints ) ) - { - /* monochrome horizontal hinting: snap widths to integer pixels */ - /* with a different threshold */ - - if ( dist < 64 ) - dist = 64; - else - dist = ( dist + 32 ) & ~63; - } - else - { - /* for horizontal anti-aliased hinting, we adopt a more subtle */ - /* approach: we strengthen small stems, round stems whose size */ - /* is between 1 and 2 pixels to an integer, otherwise nothing */ - - if ( dist < 48 ) - dist = ( dist + 64 ) >> 1; - - else if ( dist < 128 ) - { - /* We only round to an integer width if the corresponding */ - /* distortion is less than 1/4 pixel. Otherwise this */ - /* makes everything worse since the diagonals, which are */ - /* not hinted, appear a lot bolder or thinner than the */ - /* vertical stems. */ - - FT_Int delta; - - - dist = ( dist + 22 ) & ~63; - delta = dist - org_dist; - if ( delta < 0 ) - delta = -delta; - - if ( delta >= 16 ) - { - dist = org_dist; - if ( dist < 48 ) - dist = ( dist + 64 ) >> 1; - } - } - else - /* round otherwise to prevent color fringes in LCD mode */ - dist = ( dist + 32 ) & ~63; - } - } - } - - Done_Width: - if ( sign ) - dist = -dist; - - return dist; - } - - - /* align one stem edge relative to the previous stem edge */ - - static void - af_latin2_align_linked_edge( AF_GlyphHints hints, - AF_Dimension dim, - AF_Edge base_edge, - AF_Edge stem_edge ) - { - FT_Pos dist = stem_edge->opos - base_edge->opos; - - FT_Pos fitted_width = af_latin2_compute_stem_width( hints, dim, dist, - base_edge->flags, - stem_edge->flags ); - - - stem_edge->pos = base_edge->pos + fitted_width; - - FT_TRACE5(( "LINK: edge %d (opos=%.2f) linked to (%.2f), " - "dist was %.2f, now %.2f\n", - stem_edge-hints->axis[dim].edges, stem_edge->opos / 64.0, - stem_edge->pos / 64.0, dist / 64.0, fitted_width / 64.0 )); - } - - - static void - af_latin2_align_serif_edge( AF_GlyphHints hints, - AF_Edge base, - AF_Edge serif ) - { - FT_UNUSED( hints ); - - serif->pos = base->pos + ( serif->opos - base->opos ); - } - - - /*************************************************************************/ - /*************************************************************************/ - /*************************************************************************/ - /**** ****/ - /**** E D G E H I N T I N G ****/ - /**** ****/ - /*************************************************************************/ - /*************************************************************************/ - /*************************************************************************/ - - - static void - af_latin2_hint_edges( AF_GlyphHints hints, - AF_Dimension dim ) - { - AF_AxisHints axis = &hints->axis[dim]; - AF_Edge edges = axis->edges; - AF_Edge edge_limit = edges + axis->num_edges; - AF_Edge edge; - AF_Edge anchor = NULL; - FT_Int has_serifs = 0; - FT_Pos anchor_drift = 0; - - - - FT_TRACE5(( "==== hinting %s edges =====\n", - dim == AF_DIMENSION_HORZ ? "vertical" : "horizontal" )); - - /* we begin by aligning all stems relative to the blue zone */ - /* if needed -- that's only for horizontal edges */ - - if ( dim == AF_DIMENSION_VERT && AF_HINTS_DO_BLUES( hints ) ) - { - for ( edge = edges; edge < edge_limit; edge++ ) - { - AF_Width blue; - AF_Edge edge1, edge2; - - - if ( edge->flags & AF_EDGE_DONE ) - continue; - - blue = edge->blue_edge; - edge1 = NULL; - edge2 = edge->link; - - if ( blue ) - { - edge1 = edge; - } - else if ( edge2 && edge2->blue_edge ) - { - blue = edge2->blue_edge; - edge1 = edge2; - edge2 = edge; - } - - if ( !edge1 ) - continue; - - FT_TRACE5(( "BLUE: edge %d (opos=%.2f) snapped to (%.2f), " - "was (%.2f)\n", - edge1-edges, edge1->opos / 64.0, blue->fit / 64.0, - edge1->pos / 64.0 )); - - edge1->pos = blue->fit; - edge1->flags |= AF_EDGE_DONE; - - if ( edge2 && !edge2->blue_edge ) - { - af_latin2_align_linked_edge( hints, dim, edge1, edge2 ); - edge2->flags |= AF_EDGE_DONE; - } - - if ( !anchor ) - { - anchor = edge; - - anchor_drift = ( anchor->pos - anchor->opos ); - if ( edge2 ) - anchor_drift = ( anchor_drift + - ( edge2->pos - edge2->opos ) ) >> 1; - } - } - } - - /* now we will align all stem edges, trying to maintain the */ - /* relative order of stems in the glyph */ - for ( edge = edges; edge < edge_limit; edge++ ) - { - AF_Edge edge2; - - - if ( edge->flags & AF_EDGE_DONE ) - continue; - - /* skip all non-stem edges */ - edge2 = edge->link; - if ( !edge2 ) - { - has_serifs++; - continue; - } - - /* now align the stem */ - - /* this should not happen, but it's better to be safe */ - if ( edge2->blue_edge ) - { - FT_TRACE5(( "ASSERTION FAILED for edge %d\n", edge2-edges )); - - af_latin2_align_linked_edge( hints, dim, edge2, edge ); - edge->flags |= AF_EDGE_DONE; - continue; - } - - if ( !anchor ) - { - FT_Pos org_len, org_center, cur_len; - FT_Pos cur_pos1, error1, error2, u_off, d_off; - - - org_len = edge2->opos - edge->opos; - cur_len = af_latin2_compute_stem_width( hints, dim, org_len, - edge->flags, - edge2->flags ); - if ( cur_len <= 64 ) - u_off = d_off = 32; - else - { - u_off = 38; - d_off = 26; - } - - if ( cur_len < 96 ) - { - org_center = edge->opos + ( org_len >> 1 ); - - cur_pos1 = FT_PIX_ROUND( org_center ); - - error1 = org_center - ( cur_pos1 - u_off ); - if ( error1 < 0 ) - error1 = -error1; - - error2 = org_center - ( cur_pos1 + d_off ); - if ( error2 < 0 ) - error2 = -error2; - - if ( error1 < error2 ) - cur_pos1 -= u_off; - else - cur_pos1 += d_off; - - edge->pos = cur_pos1 - cur_len / 2; - edge2->pos = edge->pos + cur_len; - } - else - edge->pos = FT_PIX_ROUND( edge->opos ); - - FT_TRACE5(( "ANCHOR: edge %d (opos=%.2f) and %d (opos=%.2f)" - " snapped to (%.2f) (%.2f)\n", - edge-edges, edge->opos / 64.0, - edge2-edges, edge2->opos / 64.0, - edge->pos / 64.0, edge2->pos / 64.0 )); - anchor = edge; - - edge->flags |= AF_EDGE_DONE; - - af_latin2_align_linked_edge( hints, dim, edge, edge2 ); - - edge2->flags |= AF_EDGE_DONE; - - anchor_drift = ( ( anchor->pos - anchor->opos ) + - ( edge2->pos - edge2->opos ) ) >> 1; - - FT_TRACE5(( "DRIFT: %.2f\n", anchor_drift/64.0 )); - } - else - { - FT_Pos org_pos, org_len, org_center, cur_center, cur_len; - FT_Pos org_left, org_right; - - - org_pos = edge->opos + anchor_drift; - org_len = edge2->opos - edge->opos; - org_center = org_pos + ( org_len >> 1 ); - - cur_len = af_latin2_compute_stem_width( hints, dim, org_len, - edge->flags, - edge2->flags ); - - org_left = org_pos + ( ( org_len - cur_len ) >> 1 ); - org_right = org_pos + ( ( org_len + cur_len ) >> 1 ); - - FT_TRACE5(( "ALIGN: left=%.2f right=%.2f ", - org_left / 64.0, org_right / 64.0 )); - cur_center = org_center; - - if ( edge2->flags & AF_EDGE_DONE ) - { - FT_TRACE5(( "\n" )); - edge->pos = edge2->pos - cur_len; - } - else - { - /* we want to compare several displacement, and choose - * the one that increases fitness while minimizing - * distortion as well - */ - FT_Pos displacements[6], scores[6], org, fit, delta; - FT_UInt count = 0; - - /* note: don't even try to fit tiny stems */ - if ( cur_len < 32 ) - { - FT_TRACE5(( "tiny stem\n" )); - goto AlignStem; - } - - /* if the span is within a single pixel, don't touch it */ - if ( FT_PIX_FLOOR( org_left ) == FT_PIX_CEIL( org_right ) ) - { - FT_TRACE5(( "single pixel stem\n" )); - goto AlignStem; - } - - if ( cur_len <= 96 ) - { - /* we want to avoid the absolute worst case which is - * when the left and right edges of the span each represent - * about 50% of the gray. we'd better want to change this - * to 25/75%, since this is much more pleasant to the eye with - * very acceptable distortion - */ - FT_Pos frac_left = org_left & 63; - FT_Pos frac_right = org_right & 63; - - if ( frac_left >= 22 && frac_left <= 42 && - frac_right >= 22 && frac_right <= 42 ) - { - org = frac_left; - fit = ( org <= 32 ) ? 16 : 48; - delta = FT_ABS( fit - org ); - displacements[count] = fit - org; - scores[count++] = delta; - FT_TRACE5(( "dispA=%.2f (%d) ", ( fit - org ) / 64.0, delta )); - - org = frac_right; - fit = ( org <= 32 ) ? 16 : 48; - delta = FT_ABS( fit - org ); - displacements[count] = fit - org; - scores[count++] = delta; - FT_TRACE5(( "dispB=%.2f (%d) ", ( fit - org ) / 64.0, delta )); - } - } - - /* snapping the left edge to the grid */ - org = org_left; - fit = FT_PIX_ROUND( org ); - delta = FT_ABS( fit - org ); - displacements[count] = fit - org; - scores[count++] = delta; - FT_TRACE5(( "dispC=%.2f (%d) ", ( fit - org ) / 64.0, delta )); - - /* snapping the right edge to the grid */ - org = org_right; - fit = FT_PIX_ROUND( org ); - delta = FT_ABS( fit - org ); - displacements[count] = fit - org; - scores[count++] = delta; - FT_TRACE5(( "dispD=%.2f (%d) ", ( fit - org ) / 64.0, delta )); - - /* now find the best displacement */ - { - FT_Pos best_score = scores[0]; - FT_Pos best_disp = displacements[0]; - FT_UInt nn; - - for ( nn = 1; nn < count; nn++ ) - { - if ( scores[nn] < best_score ) - { - best_score = scores[nn]; - best_disp = displacements[nn]; - } - } - - cur_center = org_center + best_disp; - } - FT_TRACE5(( "\n" )); - } - - AlignStem: - edge->pos = cur_center - ( cur_len >> 1 ); - edge2->pos = edge->pos + cur_len; - - FT_TRACE5(( "STEM1: %d (opos=%.2f) to %d (opos=%.2f)" - " snapped to (%.2f) and (%.2f)," - " org_len=%.2f cur_len=%.2f\n", - edge-edges, edge->opos / 64.0, - edge2-edges, edge2->opos / 64.0, - edge->pos / 64.0, edge2->pos / 64.0, - org_len / 64.0, cur_len / 64.0 )); - - edge->flags |= AF_EDGE_DONE; - edge2->flags |= AF_EDGE_DONE; - - if ( edge > edges && edge->pos < edge[-1].pos ) - { - FT_TRACE5(( "BOUND: %d (pos=%.2f) to (%.2f)\n", - edge-edges, edge->pos / 64.0, edge[-1].pos / 64.0 )); - edge->pos = edge[-1].pos; - } - } - } - - /* make sure that lowercase m's maintain their symmetry */ - - /* In general, lowercase m's have six vertical edges if they are sans */ - /* serif, or twelve if they are with serifs. This implementation is */ - /* based on that assumption, and seems to work very well with most */ - /* faces. However, if for a certain face this assumption is not */ - /* true, the m is just rendered like before. In addition, any stem */ - /* correction will only be applied to symmetrical glyphs (even if the */ - /* glyph is not an m), so the potential for unwanted distortion is */ - /* relatively low. */ - - /* We don't handle horizontal edges since we can't easily assure that */ - /* the third (lowest) stem aligns with the base line; it might end up */ - /* one pixel higher or lower. */ - -#if 0 - { - FT_Int n_edges = edge_limit - edges; - - - if ( dim == AF_DIMENSION_HORZ && ( n_edges == 6 || n_edges == 12 ) ) - { - AF_Edge edge1, edge2, edge3; - FT_Pos dist1, dist2, span, delta; - - - if ( n_edges == 6 ) - { - edge1 = edges; - edge2 = edges + 2; - edge3 = edges + 4; - } - else - { - edge1 = edges + 1; - edge2 = edges + 5; - edge3 = edges + 9; - } - - dist1 = edge2->opos - edge1->opos; - dist2 = edge3->opos - edge2->opos; - - span = dist1 - dist2; - if ( span < 0 ) - span = -span; - - if ( span < 8 ) - { - delta = edge3->pos - ( 2 * edge2->pos - edge1->pos ); - edge3->pos -= delta; - if ( edge3->link ) - edge3->link->pos -= delta; - - /* move the serifs along with the stem */ - if ( n_edges == 12 ) - { - ( edges + 8 )->pos -= delta; - ( edges + 11 )->pos -= delta; - } - - edge3->flags |= AF_EDGE_DONE; - if ( edge3->link ) - edge3->link->flags |= AF_EDGE_DONE; - } - } - } -#endif - - if ( has_serifs || !anchor ) - { - /* - * now hint the remaining edges (serifs and single) in order - * to complete our processing - */ - for ( edge = edges; edge < edge_limit; edge++ ) - { - FT_Pos delta; - - - if ( edge->flags & AF_EDGE_DONE ) - continue; - - delta = 1000; - - if ( edge->serif ) - { - delta = edge->serif->opos - edge->opos; - if ( delta < 0 ) - delta = -delta; - } - - if ( delta < 64 + 16 ) - { - af_latin2_align_serif_edge( hints, edge->serif, edge ); - FT_TRACE5(( "SERIF: edge %d (opos=%.2f) serif to %d (opos=%.2f)" - " aligned to (%.2f)\n", - edge-edges, edge->opos / 64.0, - edge->serif - edges, edge->serif->opos / 64.0, - edge->pos / 64.0 )); - } - else if ( !anchor ) - { - FT_TRACE5(( "SERIF_ANCHOR: edge %d (opos=%.2f)" - " snapped to (%.2f)\n", - edge-edges, edge->opos / 64.0, edge->pos / 64.0 )); - edge->pos = FT_PIX_ROUND( edge->opos ); - anchor = edge; - } - else - { - AF_Edge before, after; - - - for ( before = edge - 1; before >= edges; before-- ) - if ( before->flags & AF_EDGE_DONE ) - break; - - for ( after = edge + 1; after < edge_limit; after++ ) - if ( after->flags & AF_EDGE_DONE ) - break; - - if ( before >= edges && before < edge && - after < edge_limit && after > edge ) - { - if ( after->opos == before->opos ) - edge->pos = before->pos; - else - edge->pos = before->pos + - FT_MulDiv( edge->opos - before->opos, - after->pos - before->pos, - after->opos - before->opos ); - FT_TRACE5(( "SERIF_LINK1: edge %d (opos=%.2f) snapped to (%.2f)" - " from %d (opos=%.2f)\n", - edge-edges, edge->opos / 64.0, edge->pos / 64.0, - before - edges, before->opos / 64.0 )); - } - else - { - edge->pos = anchor->pos + - ( ( edge->opos - anchor->opos + 16 ) & ~31 ); - - FT_TRACE5(( "SERIF_LINK2: edge %d (opos=%.2f)" - " snapped to (%.2f)\n", - edge-edges, edge->opos / 64.0, edge->pos / 64.0 )); - } - } - - edge->flags |= AF_EDGE_DONE; - - if ( edge > edges && edge->pos < edge[-1].pos ) - edge->pos = edge[-1].pos; - - if ( edge + 1 < edge_limit && - edge[1].flags & AF_EDGE_DONE && - edge->pos > edge[1].pos ) - edge->pos = edge[1].pos; - } - } - } - - - static FT_Error - af_latin2_hints_apply( FT_UInt glyph_index, - AF_GlyphHints hints, - FT_Outline* outline, - AF_LatinMetrics metrics ) - { - FT_Error error; - int dim; - - FT_UNUSED( glyph_index ); - - - error = af_glyph_hints_reload( hints, outline ); - if ( error ) - goto Exit; - - /* analyze glyph outline */ - if ( AF_HINTS_DO_HORIZONTAL( hints ) ) - { - error = af_latin2_hints_detect_features( hints, AF_DIMENSION_HORZ ); - if ( error ) - goto Exit; - } - - if ( AF_HINTS_DO_VERTICAL( hints ) ) - { - error = af_latin2_hints_detect_features( hints, AF_DIMENSION_VERT ); - if ( error ) - goto Exit; - - af_latin2_hints_compute_blue_edges( hints, metrics ); - } - - /* grid-fit the outline */ - for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ ) - { -#ifdef AF_CONFIG_OPTION_USE_WARPER - if ( dim == AF_DIMENSION_HORZ && - metrics->root.scaler.render_mode == FT_RENDER_MODE_NORMAL && - AF_HINTS_DO_WARP( hints ) ) - { - AF_WarperRec warper; - FT_Fixed scale; - FT_Pos delta; - - - af_warper_compute( &warper, hints, dim, &scale, &delta ); - af_glyph_hints_scale_dim( hints, dim, scale, delta ); - continue; - } -#endif /* AF_CONFIG_OPTION_USE_WARPER */ - - if ( ( dim == AF_DIMENSION_HORZ && AF_HINTS_DO_HORIZONTAL( hints ) ) || - ( dim == AF_DIMENSION_VERT && AF_HINTS_DO_VERTICAL( hints ) ) ) - { - af_latin2_hint_edges( hints, (AF_Dimension)dim ); - af_glyph_hints_align_edge_points( hints, (AF_Dimension)dim ); - af_glyph_hints_align_strong_points( hints, (AF_Dimension)dim ); - af_glyph_hints_align_weak_points( hints, (AF_Dimension)dim ); - } - } - af_glyph_hints_save( hints, outline ); - - Exit: - return error; - } - - - /*************************************************************************/ - /*************************************************************************/ - /***** *****/ - /***** L A T I N S C R I P T C L A S S *****/ - /***** *****/ - /*************************************************************************/ - /*************************************************************************/ - - - AF_DEFINE_WRITING_SYSTEM_CLASS( - af_latin2_writing_system_class, - - AF_WRITING_SYSTEM_LATIN2, - - sizeof ( AF_LatinMetricsRec ), - - (AF_WritingSystem_InitMetricsFunc) af_latin2_metrics_init, /* style_metrics_init */ - (AF_WritingSystem_ScaleMetricsFunc)af_latin2_metrics_scale, /* style_metrics_scale */ - (AF_WritingSystem_DoneMetricsFunc) NULL, /* style_metrics_done */ - (AF_WritingSystem_GetStdWidthsFunc)af_latin2_get_standard_widths, /* style_metrics_getstdw */ - - (AF_WritingSystem_InitHintsFunc) af_latin2_hints_init, /* style_hints_init */ - (AF_WritingSystem_ApplyHintsFunc) af_latin2_hints_apply /* style_hints_apply */ - ) - -#else /* !FT_OPTION_AUTOFIT2 */ - - /* ANSI C doesn't like empty source files */ - typedef int _af_latin2_dummy; - -#endif /* !FT_OPTION_AUTOFIT2 */ - - -/* END */ diff --git a/src/3rdparty/freetype/src/autofit/aflatin2.h b/src/3rdparty/freetype/src/autofit/aflatin2.h deleted file mode 100644 index 507cef3df2..0000000000 --- a/src/3rdparty/freetype/src/autofit/aflatin2.h +++ /dev/null @@ -1,46 +0,0 @@ -/* ATTENTION: This file doesn't compile. It is only here as a reference */ -/* of an alternative latin hinting algorithm that was always */ -/* marked as experimental. */ - - -/**************************************************************************** - * - * aflatin2.h - * - * Auto-fitter hinting routines for latin writing system - * (specification). - * - * Copyright (C) 2003-2019 by - * David Turner, Robert Wilhelm, and Werner Lemberg. - * - * This file is part of the FreeType project, and may only be used, - * modified, and distributed under the terms of the FreeType project - * license, LICENSE.TXT. By continuing to use, modify, or distribute - * this file you indicate that you have read the license and - * understand and accept it fully. - * - */ - - -#ifndef AFLATIN2_H_ -#define AFLATIN2_H_ - -#include "afhints.h" - - -FT_BEGIN_HEADER - - - /* the `latin' writing system */ - - AF_DECLARE_WRITING_SYSTEM_CLASS( af_latin2_writing_system_class ) - - -/* */ - -FT_END_HEADER - -#endif /* AFLATIN_H_ */ - - -/* END */ diff --git a/src/3rdparty/freetype/src/autofit/afloader.c b/src/3rdparty/freetype/src/autofit/afloader.c index 83743b7be1..7c47d562af 100644 --- a/src/3rdparty/freetype/src/autofit/afloader.c +++ b/src/3rdparty/freetype/src/autofit/afloader.c @@ -4,7 +4,7 @@ * * Auto-fitter glyph loading routines (body). * - * Copyright (C) 2003-2019 by + * Copyright (C) 2003-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -22,7 +22,7 @@ #include "aferrors.h" #include "afmodule.h" -#include FT_INTERNAL_CALC_H +#include <freetype/internal/ftcalc.h> /* Initialize glyph loader. */ @@ -55,10 +55,8 @@ error = af_face_globals_new( face, &loader->globals, module ); if ( !error ) { - face->autohint.data = - (FT_Pointer)loader->globals; - face->autohint.finalizer = - (FT_Generic_Finalizer)af_face_globals_free; + face->autohint.data = (FT_Pointer)loader->globals; + face->autohint.finalizer = af_face_globals_free; } } @@ -105,7 +103,6 @@ globals->stem_darkening_for_ppem; FT_Fixed em_size = af_intToFixed( face->units_per_EM ); - FT_Fixed em_ratio = FT_DivFix( af_intToFixed( 1000 ), em_size ); FT_Matrix scale_down_matrix = { 0x10000L, 0, 0, 0x10000L }; @@ -142,12 +139,11 @@ darken_by_font_units_x = - af_intToFixed( af_loader_compute_darkening( loader, - face, - stdVW ) ); - darken_x = FT_DivFix( FT_MulFix( darken_by_font_units_x, - size_metrics->x_scale ), - em_ratio ); + af_loader_compute_darkening( loader, + face, + stdVW ) ; + darken_x = FT_MulFix( darken_by_font_units_x, + size_metrics->x_scale ); globals->standard_vertical_width = stdVW; globals->stem_darkening_for_ppem = size_metrics->x_ppem; @@ -161,12 +157,11 @@ darken_by_font_units_y = - af_intToFixed( af_loader_compute_darkening( loader, - face, - stdHW ) ); - darken_y = FT_DivFix( FT_MulFix( darken_by_font_units_y, - size_metrics->y_scale ), - em_ratio ); + af_loader_compute_darkening( loader, + face, + stdHW ) ; + darken_y = FT_MulFix( darken_by_font_units_y, + size_metrics->y_scale ); globals->standard_horizontal_width = stdHW; globals->stem_darkening_for_ppem = size_metrics->x_ppem; @@ -232,9 +227,6 @@ AF_WritingSystemClass writing_system_class; - if ( !size ) - return FT_THROW( Invalid_Size_Handle ); - FT_ZERO( &scaler ); if ( !size_internal->autohint_metrics.x_scale || @@ -300,12 +292,6 @@ if ( error ) goto Exit; -#ifdef FT_OPTION_AUTOFIT2 - /* XXX: undocumented hook to activate the latin2 writing system. */ - if ( load_flags & ( 1UL << 20 ) ) - style_options = AF_STYLE_LTN2_DFLT; -#endif - /* * Glyphs (really code points) are assigned to scripts. Script * analysis is done lazily: For each glyph that passes through here, @@ -482,8 +468,8 @@ FT_Pos pp2x = loader->pp2.x; - loader->pp1.x = FT_PIX_ROUND( pp1x + hints->xmin_delta ); - loader->pp2.x = FT_PIX_ROUND( pp2x + hints->xmax_delta ); + loader->pp1.x = FT_PIX_ROUND( pp1x ); + loader->pp2.x = FT_PIX_ROUND( pp2x ); slot->lsb_delta = loader->pp1.x - pp1x; slot->rsb_delta = loader->pp2.x - pp2x; @@ -594,7 +580,7 @@ * * XXX: Currently a crude adaption of the original algorithm. Do better? */ - FT_LOCAL_DEF( FT_Int32 ) + FT_LOCAL_DEF( FT_Fixed ) af_loader_compute_darkening( AF_Loader loader, FT_Face face, FT_Pos standard_width ) @@ -713,7 +699,7 @@ } /* Convert darken_amount from per 1000 em to true character space. */ - return af_fixedToInt( FT_DivFix( darken_amount, em_ratio ) ); + return FT_DivFix( darken_amount, em_ratio ); } diff --git a/src/3rdparty/freetype/src/autofit/afloader.h b/src/3rdparty/freetype/src/autofit/afloader.h index d1e0f3c093..e4e197e374 100644 --- a/src/3rdparty/freetype/src/autofit/afloader.h +++ b/src/3rdparty/freetype/src/autofit/afloader.h @@ -4,7 +4,7 @@ * * Auto-fitter glyph loading routines (specification). * - * Copyright (C) 2003-2019 by + * Copyright (C) 2003-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -75,7 +75,7 @@ FT_BEGIN_HEADER FT_UInt gindex, FT_Int32 load_flags ); - FT_LOCAL_DEF( FT_Int32 ) + FT_LOCAL( FT_Fixed ) af_loader_compute_darkening( AF_Loader loader, FT_Face face, FT_Pos standard_width ); diff --git a/src/3rdparty/freetype/src/autofit/afmodule.c b/src/3rdparty/freetype/src/autofit/afmodule.c index 3e46a3655a..20a6b96bc4 100644 --- a/src/3rdparty/freetype/src/autofit/afmodule.c +++ b/src/3rdparty/freetype/src/autofit/afmodule.c @@ -4,7 +4,7 @@ * * Auto-fitter module implementation (body). * - * Copyright (C) 2003-2019 by + * Copyright (C) 2003-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -43,20 +43,20 @@ #endif - int _af_debug_disable_horz_hints; - int _af_debug_disable_vert_hints; - int _af_debug_disable_blue_hints; + int af_debug_disable_horz_hints_; + int af_debug_disable_vert_hints_; + int af_debug_disable_blue_hints_; /* we use a global object instead of a local one for debugging */ - AF_GlyphHintsRec _af_debug_hints_rec[1]; + static AF_GlyphHintsRec af_debug_hints_rec_[1]; - void* _af_debug_hints = _af_debug_hints_rec; + void* af_debug_hints_ = af_debug_hints_rec_; #endif -#include FT_INTERNAL_OBJECTS_H -#include FT_INTERNAL_DEBUG_H -#include FT_DRIVER_H -#include FT_SERVICE_PROPERTIES_H +#include <freetype/internal/ftobjs.h> +#include <freetype/internal/ftdebug.h> +#include <freetype/ftdriver.h> +#include <freetype/internal/services/svprop.h> /************************************************************************** @@ -89,10 +89,8 @@ error = af_face_globals_new( face, &globals, module ); if ( !error ) { - face->autohint.data = - (FT_Pointer)globals; - face->autohint.finalizer = - (FT_Generic_Finalizer)af_face_globals_free; + face->autohint.data = (FT_Pointer)globals; + face->autohint.finalizer = af_face_globals_free; } } @@ -119,8 +117,8 @@ if ( !ft_strcmp( property_name, "fallback-script" ) ) { - FT_UInt* fallback_script; - FT_UInt ss; + AF_Script* fallback_script; + FT_UInt ss; #ifdef FT_CONFIG_OPTION_ENVIRONMENT_PROPERTIES @@ -128,7 +126,7 @@ return FT_THROW( Invalid_Argument ); #endif - fallback_script = (FT_UInt*)value; + fallback_script = (AF_Script*)value; /* We translate the fallback script to a fallback style that uses */ /* `fallback-script' as its script and `AF_COVERAGE_NONE' as its */ @@ -138,8 +136,8 @@ AF_StyleClass style_class = af_style_classes[ss]; - if ( (FT_UInt)style_class->script == *fallback_script && - style_class->coverage == AF_COVERAGE_DEFAULT ) + if ( style_class->script == *fallback_script && + style_class->coverage == AF_COVERAGE_DEFAULT ) { module->fallback_style = ss; break; @@ -148,8 +146,8 @@ if ( !af_style_classes[ss] ) { - FT_TRACE0(( "af_property_set: Invalid value %d for property `%s'\n", - fallback_script, property_name )); + FT_TRACE2(( "af_property_set: Invalid value %d for property `%s'\n", + *fallback_script, property_name )); return FT_THROW( Invalid_Argument ); } @@ -157,7 +155,7 @@ } else if ( !ft_strcmp( property_name, "default-script" ) ) { - FT_UInt* default_script; + AF_Script* default_script; #ifdef FT_CONFIG_OPTION_ENVIRONMENT_PROPERTIES @@ -165,7 +163,7 @@ return FT_THROW( Invalid_Argument ); #endif - default_script = (FT_UInt*)value; + default_script = (AF_Script*)value; module->default_script = *default_script; @@ -190,35 +188,6 @@ return error; } -#ifdef AF_CONFIG_OPTION_USE_WARPER - else if ( !ft_strcmp( property_name, "warping" ) ) - { -#ifdef FT_CONFIG_OPTION_ENVIRONMENT_PROPERTIES - if ( value_is_string ) - { - const char* s = (const char*)value; - long w = ft_strtol( s, NULL, 10 ); - - - if ( w == 0 ) - module->warping = 0; - else if ( w == 1 ) - module->warping = 1; - else - return FT_THROW( Invalid_Argument ); - } - else -#endif - { - FT_Bool* warping = (FT_Bool*)value; - - - module->warping = *warping; - } - - return error; - } -#endif /* AF_CONFIG_OPTION_USE_WARPER */ else if ( !ft_strcmp( property_name, "darkening-parameters" ) ) { FT_Int* darken_params; @@ -307,7 +276,7 @@ return error; } - FT_TRACE0(( "af_property_set: missing property `%s'\n", + FT_TRACE2(( "af_property_set: missing property `%s'\n", property_name )); return FT_THROW( Missing_Property ); } @@ -320,11 +289,6 @@ { FT_Error error = FT_Err_Ok; AF_Module module = (AF_Module)ft_module; - FT_UInt fallback_style = module->fallback_style; - FT_UInt default_script = module->default_script; -#ifdef AF_CONFIG_OPTION_USE_WARPER - FT_Bool warping = module->warping; -#endif if ( !ft_strcmp( property_name, "glyph-to-script-map" ) ) @@ -341,9 +305,9 @@ } else if ( !ft_strcmp( property_name, "fallback-script" ) ) { - FT_UInt* val = (FT_UInt*)value; + AF_Script* val = (AF_Script*)value; - AF_StyleClass style_class = af_style_classes[fallback_style]; + AF_StyleClass style_class = af_style_classes[module->fallback_style]; *val = style_class->script; @@ -352,10 +316,10 @@ } else if ( !ft_strcmp( property_name, "default-script" ) ) { - FT_UInt* val = (FT_UInt*)value; + AF_Script* val = (AF_Script*)value; - *val = default_script; + *val = module->default_script; return error; } @@ -371,17 +335,6 @@ return error; } -#ifdef AF_CONFIG_OPTION_USE_WARPER - else if ( !ft_strcmp( property_name, "warping" ) ) - { - FT_Bool* val = (FT_Bool*)value; - - - *val = warping; - - return error; - } -#endif /* AF_CONFIG_OPTION_USE_WARPER */ else if ( !ft_strcmp( property_name, "darkening-parameters" ) ) { FT_Int* darken_params = module->darken_params; @@ -410,7 +363,7 @@ return error; } - FT_TRACE0(( "af_property_get: missing property `%s'\n", + FT_TRACE2(( "af_property_get: missing property `%s'\n", property_name )); return FT_THROW( Missing_Property ); } @@ -419,8 +372,9 @@ FT_DEFINE_SERVICE_PROPERTIESREC( af_service_properties, - (FT_Properties_SetFunc)af_property_set, /* set_property */ - (FT_Properties_GetFunc)af_property_get ) /* get_property */ + af_property_set, /* FT_Properties_SetFunc set_property */ + af_property_get /* FT_Properties_GetFunc get_property */ + ) FT_DEFINE_SERVICEDESCREC1( @@ -447,9 +401,6 @@ module->fallback_style = AF_STYLE_FALLBACK; module->default_script = AF_SCRIPT_DEFAULT; -#ifdef AF_CONFIG_OPTION_USE_WARPER - module->warping = 0; -#endif module->no_stem_darkening = TRUE; module->darken_params[0] = CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1; @@ -471,19 +422,21 @@ FT_UNUSED( ft_module ); #ifdef FT_DEBUG_AUTOFIT - if ( _af_debug_hints_rec->memory ) - af_glyph_hints_done( _af_debug_hints_rec ); + if ( af_debug_hints_rec_->memory ) + af_glyph_hints_done( af_debug_hints_rec_ ); #endif } FT_CALLBACK_DEF( FT_Error ) - af_autofitter_load_glyph( AF_Module module, - FT_GlyphSlot slot, - FT_Size size, - FT_UInt glyph_index, - FT_Int32 load_flags ) + af_autofitter_load_glyph( FT_AutoHinter module_, + FT_GlyphSlot slot, + FT_Size size, + FT_UInt glyph_index, + FT_Int32 load_flags ) { + AF_Module module = (AF_Module)module_; + FT_Error error = FT_Err_Ok; FT_Memory memory = module->root.library->memory; @@ -491,7 +444,7 @@ /* in debug mode, we use a global object that survives this routine */ - AF_GlyphHints hints = _af_debug_hints_rec; + AF_GlyphHints hints = af_debug_hints_rec_; AF_LoaderRec loader[1]; FT_UNUSED( size ); @@ -547,11 +500,11 @@ FT_DEFINE_AUTOHINTER_INTERFACE( af_autofitter_interface, - NULL, /* reset_face */ - NULL, /* get_global_hints */ - NULL, /* done_global_hints */ - (FT_AutoHinter_GlyphLoadFunc)af_autofitter_load_glyph ) /* load_glyph */ - + NULL, /* FT_AutoHinter_GlobalResetFunc reset_face */ + NULL, /* FT_AutoHinter_GlobalGetFunc get_global_hints */ + NULL, /* FT_AutoHinter_GlobalDoneFunc done_global_hints */ + af_autofitter_load_glyph /* FT_AutoHinter_GlyphLoadFunc load_glyph */ + ) FT_DEFINE_MODULE( autofit_module_class, @@ -565,9 +518,9 @@ (const void*)&af_autofitter_interface, - (FT_Module_Constructor)af_autofitter_init, /* module_init */ - (FT_Module_Destructor) af_autofitter_done, /* module_done */ - (FT_Module_Requester) af_get_interface /* get_interface */ + af_autofitter_init, /* FT_Module_Constructor module_init */ + af_autofitter_done, /* FT_Module_Destructor module_done */ + af_get_interface /* FT_Module_Requester get_interface */ ) diff --git a/src/3rdparty/freetype/src/autofit/afmodule.h b/src/3rdparty/freetype/src/autofit/afmodule.h index b410809aa8..4b8b4562c6 100644 --- a/src/3rdparty/freetype/src/autofit/afmodule.h +++ b/src/3rdparty/freetype/src/autofit/afmodule.h @@ -4,7 +4,7 @@ * * Auto-fitter module implementation (specification). * - * Copyright (C) 2003-2019 by + * Copyright (C) 2003-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -19,9 +19,8 @@ #ifndef AFMODULE_H_ #define AFMODULE_H_ -#include <ft2build.h> -#include FT_INTERNAL_OBJECTS_H -#include FT_MODULE_H +#include <freetype/internal/ftobjs.h> +#include <freetype/ftmodapi.h> FT_BEGIN_HEADER @@ -37,16 +36,14 @@ FT_BEGIN_HEADER FT_ModuleRec root; FT_UInt fallback_style; - FT_UInt default_script; -#ifdef AF_CONFIG_OPTION_USE_WARPER - FT_Bool warping; -#endif + AF_Script default_script; FT_Bool no_stem_darkening; FT_Int darken_params[8]; } AF_ModuleRec, *AF_Module; +FT_DECLARE_AUTOHINTER_INTERFACE( af_autofitter_interface ) FT_DECLARE_MODULE( autofit_module_class ) diff --git a/src/3rdparty/freetype/src/autofit/afpic.c b/src/3rdparty/freetype/src/autofit/afpic.c deleted file mode 100644 index d48d016a0e..0000000000 --- a/src/3rdparty/freetype/src/autofit/afpic.c +++ /dev/null @@ -1,152 +0,0 @@ -/***************************************************************************/ -/* */ -/* afpic.c */ -/* */ -/* The FreeType position independent code services for autofit module. */ -/* */ -/* Copyright 2009-2018 by */ -/* Oran Agra and Mickey Gabel. */ -/* */ -/* This file is part of the FreeType project, and may only be used, */ -/* modified, and distributed under the terms of the FreeType project */ -/* license, LICENSE.TXT. By continuing to use, modify, or distribute */ -/* this file you indicate that you have read the license and */ -/* understand and accept it fully. */ -/* */ -/***************************************************************************/ - - -#include <ft2build.h> -#include FT_FREETYPE_H -#include FT_INTERNAL_OBJECTS_H -#include "afpic.h" -#include "afglobal.h" -#include "aferrors.h" - - -#ifdef FT_CONFIG_OPTION_PIC - - /* forward declaration of PIC init functions from afmodule.c */ - FT_Error - FT_Create_Class_af_services( FT_Library library, - FT_ServiceDescRec** output_class ); - - void - FT_Destroy_Class_af_services( FT_Library library, - FT_ServiceDescRec* clazz ); - - void - FT_Init_Class_af_service_properties( FT_Service_PropertiesRec* clazz ); - - void FT_Init_Class_af_autofitter_interface( - FT_Library library, - FT_AutoHinter_InterfaceRec* clazz ); - - - /* forward declaration of PIC init functions from writing system classes */ -#undef WRITING_SYSTEM -#define WRITING_SYSTEM( ws, WS ) /* empty */ - -#include "afwrtsys.h" - - - void - autofit_module_class_pic_free( FT_Library library ) - { - FT_PIC_Container* pic_container = &library->pic_container; - FT_Memory memory = library->memory; - - - if ( pic_container->autofit ) - { - AFModulePIC* container = (AFModulePIC*)pic_container->autofit; - - - if ( container->af_services ) - FT_Destroy_Class_af_services( library, - container->af_services ); - container->af_services = NULL; - - FT_FREE( container ); - pic_container->autofit = NULL; - } - } - - - FT_Error - autofit_module_class_pic_init( FT_Library library ) - { - FT_PIC_Container* pic_container = &library->pic_container; - FT_UInt ss; - FT_Error error = FT_Err_Ok; - AFModulePIC* container = NULL; - FT_Memory memory = library->memory; - - - /* allocate pointer, clear and set global container pointer */ - if ( FT_ALLOC ( container, sizeof ( *container ) ) ) - return error; - FT_MEM_SET( container, 0, sizeof ( *container ) ); - pic_container->autofit = container; - - /* initialize pointer table - */ - /* this is how the module usually expects this data */ - error = FT_Create_Class_af_services( library, - &container->af_services ); - if ( error ) - goto Exit; - - FT_Init_Class_af_service_properties( &container->af_service_properties ); - - for ( ss = 0; ss < AF_WRITING_SYSTEM_MAX; ss++ ) - container->af_writing_system_classes[ss] = - &container->af_writing_system_classes_rec[ss]; - container->af_writing_system_classes[AF_WRITING_SYSTEM_MAX] = NULL; - - for ( ss = 0; ss < AF_SCRIPT_MAX; ss++ ) - container->af_script_classes[ss] = - &container->af_script_classes_rec[ss]; - container->af_script_classes[AF_SCRIPT_MAX] = NULL; - - for ( ss = 0; ss < AF_STYLE_MAX; ss++ ) - container->af_style_classes[ss] = - &container->af_style_classes_rec[ss]; - container->af_style_classes[AF_STYLE_MAX] = NULL; - -#undef WRITING_SYSTEM -#define WRITING_SYSTEM( ws, WS ) \ - FT_Init_Class_af_ ## ws ## _writing_system_class( \ - &container->af_writing_system_classes_rec[ss++] ); - - ss = 0; -#include "afwrtsys.h" - -#undef SCRIPT -#define SCRIPT( s, S, d, h, H, sss ) \ - FT_Init_Class_af_ ## s ## _script_class( \ - &container->af_script_classes_rec[ss++] ); - - ss = 0; -#include "afscript.h" - -#undef STYLE -#define STYLE( s, S, d, ws, sc, bss, c ) \ - FT_Init_Class_af_ ## s ## _style_class( \ - &container->af_style_classes_rec[ss++] ); - - ss = 0; -#include "afstyles.h" - - FT_Init_Class_af_autofitter_interface( - library, &container->af_autofitter_interface ); - - Exit: - if ( error ) - autofit_module_class_pic_free( library ); - return error; - } - -#endif /* FT_CONFIG_OPTION_PIC */ - - -/* END */ diff --git a/src/3rdparty/freetype/src/autofit/afpic.h b/src/3rdparty/freetype/src/autofit/afpic.h deleted file mode 100644 index 0c73456785..0000000000 --- a/src/3rdparty/freetype/src/autofit/afpic.h +++ /dev/null @@ -1,105 +0,0 @@ -/***************************************************************************/ -/* */ -/* afpic.h */ -/* */ -/* The FreeType position independent code services for autofit module. */ -/* */ -/* Copyright 2009-2018 by */ -/* Oran Agra and Mickey Gabel. */ -/* */ -/* This file is part of the FreeType project, and may only be used, */ -/* modified, and distributed under the terms of the FreeType project */ -/* license, LICENSE.TXT. By continuing to use, modify, or distribute */ -/* this file you indicate that you have read the license and */ -/* understand and accept it fully. */ -/* */ -/***************************************************************************/ - - -#ifndef AFPIC_H_ -#define AFPIC_H_ - - -#include FT_INTERNAL_PIC_H - - -#ifndef FT_CONFIG_OPTION_PIC - -#define AF_SERVICES_GET af_services -#define AF_SERVICE_PROPERTIES_GET af_service_properties - -#define AF_WRITING_SYSTEM_CLASSES_GET af_writing_system_classes -#define AF_SCRIPT_CLASSES_GET af_script_classes -#define AF_STYLE_CLASSES_GET af_style_classes -#define AF_INTERFACE_GET af_autofitter_interface - -#else /* FT_CONFIG_OPTION_PIC */ - - /* some include files required for members of AFModulePIC */ -#include FT_SERVICE_PROPERTIES_H - -#include "aftypes.h" - - -FT_BEGIN_HEADER - - typedef struct AFModulePIC_ - { - FT_ServiceDescRec* af_services; - FT_Service_PropertiesRec af_service_properties; - - AF_WritingSystemClass af_writing_system_classes - [AF_WRITING_SYSTEM_MAX + 1]; - AF_WritingSystemClassRec af_writing_system_classes_rec - [AF_WRITING_SYSTEM_MAX]; - - AF_ScriptClass af_script_classes - [AF_SCRIPT_MAX + 1]; - AF_ScriptClassRec af_script_classes_rec - [AF_SCRIPT_MAX]; - - AF_StyleClass af_style_classes - [AF_STYLE_MAX + 1]; - AF_StyleClassRec af_style_classes_rec - [AF_STYLE_MAX]; - - FT_AutoHinter_InterfaceRec af_autofitter_interface; - - } AFModulePIC; - - -#define GET_PIC( lib ) \ - ( (AFModulePIC*)( (lib)->pic_container.autofit ) ) - -#define AF_SERVICES_GET \ - ( GET_PIC( library )->af_services ) -#define AF_SERVICE_PROPERTIES_GET \ - ( GET_PIC( library )->af_service_properties ) - -#define AF_WRITING_SYSTEM_CLASSES_GET \ - ( GET_PIC( FT_FACE_LIBRARY( globals->face ) )->af_writing_system_classes ) -#define AF_SCRIPT_CLASSES_GET \ - ( GET_PIC( FT_FACE_LIBRARY( globals->face ) )->af_script_classes ) -#define AF_STYLE_CLASSES_GET \ - ( GET_PIC( FT_FACE_LIBRARY( globals->face ) )->af_style_classes ) -#define AF_INTERFACE_GET \ - ( GET_PIC( library )->af_autofitter_interface ) - - - /* see afpic.c for the implementation */ - void - autofit_module_class_pic_free( FT_Library library ); - - FT_Error - autofit_module_class_pic_init( FT_Library library ); - -FT_END_HEADER - -#endif /* FT_CONFIG_OPTION_PIC */ - - /* */ - -#endif /* AFPIC_H_ */ - - -/* END */ diff --git a/src/3rdparty/freetype/src/autofit/afranges.c b/src/3rdparty/freetype/src/autofit/afranges.c index 45c8bbfc95..cfcaf340a7 100644 --- a/src/3rdparty/freetype/src/autofit/afranges.c +++ b/src/3rdparty/freetype/src/autofit/afranges.c @@ -4,7 +4,7 @@ * * Auto-fitter Unicode script ranges (body). * - * Copyright (C) 2013-2019 by + * Copyright (C) 2013-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -664,6 +664,18 @@ }; + const AF_Script_UniRangeRec af_medf_uniranges[] = + { + AF_UNIRANGE_REC( 0x16E40, 0x16E9F ), /* Medefaidrin */ + AF_UNIRANGE_REC( 0, 0 ) + }; + + const AF_Script_UniRangeRec af_medf_nonbase_uniranges[] = + { + AF_UNIRANGE_REC( 0, 0 ) + }; + + const AF_Script_UniRangeRec af_mong_uniranges[] = { AF_UNIRANGE_REC( 0x1800, 0x18AF ), /* Mongolian */ @@ -778,6 +790,18 @@ }; + const AF_Script_UniRangeRec af_rohg_uniranges[] = + { + AF_UNIRANGE_REC( 0x10D00, 0x10D3F ), /* Hanifi Rohingya */ + AF_UNIRANGE_REC( 0, 0 ) + }; + + const AF_Script_UniRangeRec af_rohg_nonbase_uniranges[] = + { + AF_UNIRANGE_REC( 0, 0 ) + }; + + const AF_Script_UniRangeRec af_saur_uniranges[] = { AF_UNIRANGE_REC( 0xA880, 0xA8DF ), /* Saurashtra */ diff --git a/src/3rdparty/freetype/src/autofit/afranges.h b/src/3rdparty/freetype/src/autofit/afranges.h index d5917aefed..5775738bc0 100644 --- a/src/3rdparty/freetype/src/autofit/afranges.h +++ b/src/3rdparty/freetype/src/autofit/afranges.h @@ -4,7 +4,7 @@ * * Auto-fitter Unicode script ranges (specification). * - * Copyright (C) 2013-2019 by + * Copyright (C) 2013-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, diff --git a/src/3rdparty/freetype/src/autofit/afscript.h b/src/3rdparty/freetype/src/autofit/afscript.h index 2da8c70183..3a101937d7 100644 --- a/src/3rdparty/freetype/src/autofit/afscript.h +++ b/src/3rdparty/freetype/src/autofit/afscript.h @@ -4,7 +4,7 @@ * * Auto-fitter scripts (specification only). * - * Copyright (C) 2013-2019 by + * Copyright (C) 2013-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -243,6 +243,12 @@ HINTING_BOTTOM_TO_TOP, "\xE0\xB4\xA0 \xE0\xB4\xB1" ) /* ഠ റ */ + SCRIPT( medf, MEDF, + "Medefaidrin", + HB_SCRIPT_MEDEFAIDRIN, + HINTING_BOTTOM_TO_TOP, + "\xF0\x96\xB9\xA1 \xF0\x96\xB9\x9B \xF0\x96\xB9\xAF" ) /* 𖹡 𖹛 𖹯 */ + SCRIPT( mong, MONG, "Mongolian", HB_SCRIPT_MONGOLIAN, @@ -291,6 +297,12 @@ HINTING_BOTTOM_TO_TOP, "\xF0\x90\x92\x86 \xF0\x90\x92\xA0" ) /* 𐒆 𐒠 */ + SCRIPT( rohg, ROHG, + "Hanifi Rohingya", + HB_SCRIPT_HANIFI_ROHINGYA, + HINTING_BOTTOM_TO_TOP, + "\xF0\x90\xB4\xB0" ) /* 𐴰 */ + SCRIPT( saur, SAUR, "Saurashtra", HB_SCRIPT_SAURASHTRA, diff --git a/src/3rdparty/freetype/src/autofit/afshaper.c b/src/3rdparty/freetype/src/autofit/afshaper.c index a5191c6915..abc6f1d292 100644 --- a/src/3rdparty/freetype/src/autofit/afshaper.c +++ b/src/3rdparty/freetype/src/autofit/afshaper.c @@ -4,7 +4,7 @@ * * HarfBuzz interface for accessing OpenType features (body). * - * Copyright (C) 2013-2019 by + * Copyright (C) 2013-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -16,9 +16,8 @@ */ -#include <ft2build.h> -#include FT_FREETYPE_H -#include FT_ADVANCES_H +#include <freetype/freetype.h> +#include <freetype/ftadvanc.h> #include "afglobal.h" #include "aftypes.h" #include "afshaper.h" @@ -133,13 +132,24 @@ /* Convert a HarfBuzz script tag into the corresponding OpenType */ /* tag or tags -- some Indic scripts like Devanagari have an old */ /* and a new set of features. */ - hb_ot_tags_from_script( script, - &script_tags[0], - &script_tags[1] ); + { + unsigned int tags_count = 3; + hb_tag_t tags[3]; + + + hb_ot_tags_from_script_and_language( script, + HB_LANGUAGE_INVALID, + &tags_count, + tags, + NULL, + NULL ); + script_tags[0] = tags_count > 0 ? tags[0] : HB_TAG_NONE; + script_tags[1] = tags_count > 1 ? tags[1] : HB_TAG_NONE; + script_tags[2] = tags_count > 2 ? tags[2] : HB_TAG_NONE; + } - /* `hb_ot_tags_from_script' usually returns HB_OT_TAG_DEFAULT_SCRIPT */ - /* as the second tag. We change that to HB_TAG_NONE except for the */ - /* default script. */ + /* If the second tag is HB_OT_TAG_DEFAULT_SCRIPT, change that to */ + /* HB_TAG_NONE except for the default script. */ if ( default_script ) { if ( script_tags[0] == HB_TAG_NONE ) @@ -158,9 +168,6 @@ /* HarfBuzz maps them to `DFLT', which we don't want to handle here */ if ( script_tags[0] == HB_OT_TAG_DEFAULT_SCRIPT ) goto Exit; - - if ( script_tags[1] == HB_OT_TAG_DEFAULT_SCRIPT ) - script_tags[1] = HB_TAG_NONE; } gsub_lookups = hb_set_create(); @@ -174,9 +181,9 @@ if ( hb_set_is_empty( gsub_lookups ) ) goto Exit; /* nothing to do */ - FT_TRACE4(( "GSUB lookups (style `%s'):\n" - " ", + FT_TRACE4(( "GSUB lookups (style `%s'):\n", af_style_names[style_class->style] )); + FT_TRACE4(( " " )); #ifdef FT_DEBUG_LEVEL_TRACE count = 0; @@ -203,12 +210,13 @@ #ifdef FT_DEBUG_LEVEL_TRACE if ( !count ) FT_TRACE4(( " (none)" )); - FT_TRACE4(( "\n\n" )); + FT_TRACE4(( "\n" )); + FT_TRACE4(( "\n" )); #endif - FT_TRACE4(( "GPOS lookups (style `%s'):\n" - " ", + FT_TRACE4(( "GPOS lookups (style `%s'):\n", af_style_names[style_class->style] )); + FT_TRACE4(( " " )); gpos_lookups = hb_set_create(); hb_ot_layout_collect_lookups( face, @@ -243,13 +251,14 @@ #ifdef FT_DEBUG_LEVEL_TRACE if ( !count ) FT_TRACE4(( " (none)" )); - FT_TRACE4(( "\n\n" )); + FT_TRACE4(( "\n" )); + FT_TRACE4(( "\n" )); #endif /* * We now check whether we can construct blue zones, using glyphs * covered by the feature only. In case there is not a single zone - * (this is, not a single character is covered), we skip this coverage. + * (that is, not a single character is covered), we skip this coverage. * */ if ( style_class->coverage != AF_COVERAGE_DEFAULT ) @@ -304,9 +313,9 @@ * hinted and usually rendered glyph. * * Consider the superscript feature of font `pala.ttf': Some of the - * glyphs are `real', this is, they have a zero vertical offset, but + * glyphs are `real', that is, they have a zero vertical offset, but * most of them are small caps glyphs shifted up to the superscript - * position (this is, the `sups' feature is present in both the GSUB and + * position (that is, the `sups' feature is present in both the GSUB and * GPOS tables). The code for blue zones computation actually uses a * feature's y offset so that the `real' glyphs get correct hints. But * later on it is impossible to decide whether a glyph index belongs to, @@ -354,8 +363,10 @@ { #ifdef FT_DEBUG_LEVEL_TRACE if ( !( count % 10 ) ) - FT_TRACE4(( "\n" - " " )); + { + FT_TRACE4(( "\n" )); + FT_TRACE4(( " " )); + } FT_TRACE4(( " %d", idx )); count++; @@ -377,9 +388,12 @@ #ifdef FT_DEBUG_LEVEL_TRACE if ( !count ) - FT_TRACE4(( "\n" - " (none)" )); - FT_TRACE4(( "\n\n" )); + { + FT_TRACE4(( "\n" )); + FT_TRACE4(( " (none)" )); + } + FT_TRACE4(( "\n" )); + FT_TRACE4(( "\n" )); #endif Exit: diff --git a/src/3rdparty/freetype/src/autofit/afshaper.h b/src/3rdparty/freetype/src/autofit/afshaper.h index 06a1e06616..054a18ffbc 100644 --- a/src/3rdparty/freetype/src/autofit/afshaper.h +++ b/src/3rdparty/freetype/src/autofit/afshaper.h @@ -4,7 +4,7 @@ * * HarfBuzz interface for accessing OpenType features (specification). * - * Copyright (C) 2013-2019 by + * Copyright (C) 2013-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -20,15 +20,14 @@ #define AFSHAPER_H_ -#include <ft2build.h> -#include FT_FREETYPE_H +#include <freetype/freetype.h> #ifdef FT_CONFIG_OPTION_USE_HARFBUZZ #include <hb.h> #include <hb-ot.h> -#include <hb-ft.h> +#include "ft-hb.h" #endif diff --git a/src/3rdparty/freetype/src/autofit/afstyles.h b/src/3rdparty/freetype/src/autofit/afstyles.h index 8d1d70812f..73ebef0171 100644 --- a/src/3rdparty/freetype/src/autofit/afstyles.h +++ b/src/3rdparty/freetype/src/autofit/afstyles.h @@ -4,7 +4,7 @@ * * Auto-fitter styles (specification only). * - * Copyright (C) 2013-2019 by + * Copyright (C) 2013-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -299,15 +299,6 @@ AF_BLUE_STRINGSET_LATP, AF_COVERAGE_DEFAULT ) -#ifdef FT_OPTION_AUTOFIT2 - STYLE( ltn2_dflt, LTN2_DFLT, - "Latin 2 default style", - AF_WRITING_SYSTEM_LATIN2, - AF_SCRIPT_LATN, - AF_BLUE_STRINGSET_LATN, - AF_COVERAGE_DEFAULT ) -#endif - STYLE( lisu_dflt, LISU_DFLT, "Lisu default style", AF_WRITING_SYSTEM_LATIN, @@ -322,6 +313,13 @@ AF_BLUE_STRINGSET_MLYM, AF_COVERAGE_DEFAULT ) + STYLE( medf_dflt, MEDF_DFLT, + "Medefaidrin default style", + AF_WRITING_SYSTEM_LATIN, + AF_SCRIPT_MEDF, + AF_BLUE_STRINGSET_MEDF, + AF_COVERAGE_DEFAULT ) + STYLE( mong_dflt, MONG_DFLT, "Mongolian default style", AF_WRITING_SYSTEM_LATIN, @@ -378,6 +376,13 @@ AF_BLUE_STRINGSET_OSMA, AF_COVERAGE_DEFAULT ) + STYLE( rohg_dflt, ROHG_DFLT, + "Hanifi Rohingya default style", + AF_WRITING_SYSTEM_LATIN, + AF_SCRIPT_ROHG, + AF_BLUE_STRINGSET_ROHG, + AF_COVERAGE_DEFAULT ) + STYLE( saur_dflt, SAUR_DFLT, "Saurashtra default style", AF_WRITING_SYSTEM_LATIN, diff --git a/src/3rdparty/freetype/src/autofit/aftypes.h b/src/3rdparty/freetype/src/autofit/aftypes.h index 579003d27d..6615194496 100644 --- a/src/3rdparty/freetype/src/autofit/aftypes.h +++ b/src/3rdparty/freetype/src/autofit/aftypes.h @@ -4,7 +4,7 @@ * * Auto-fitter types (specification only). * - * Copyright (C) 2003-2019 by + * Copyright (C) 2003-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -32,12 +32,11 @@ #ifndef AFTYPES_H_ #define AFTYPES_H_ -#include <ft2build.h> -#include FT_FREETYPE_H -#include FT_OUTLINE_H -#include FT_INTERNAL_OBJECTS_H -#include FT_INTERNAL_DEBUG_H +#include <freetype/freetype.h> +#include <freetype/ftoutln.h> +#include <freetype/internal/ftobjs.h> +#include <freetype/internal/ftdebug.h> #include "afblue.h" @@ -58,10 +57,10 @@ FT_BEGIN_HEADER #ifdef FT_DEBUG_AUTOFIT -extern int _af_debug_disable_horz_hints; -extern int _af_debug_disable_vert_hints; -extern int _af_debug_disable_blue_hints; -extern void* _af_debug_hints; +extern int af_debug_disable_horz_hints_; +extern int af_debug_disable_vert_hints_; +extern int af_debug_disable_blue_hints_; +extern void* af_debug_hints_; #endif /* FT_DEBUG_AUTOFIT */ @@ -93,63 +92,6 @@ extern void* _af_debug_hints; FT_Pos threshold ); - /*************************************************************************/ - /*************************************************************************/ - /***** *****/ - /***** A N G L E T Y P E S *****/ - /***** *****/ - /*************************************************************************/ - /*************************************************************************/ - - /* - * The auto-fitter doesn't need a very high angular accuracy; - * this allows us to speed up some computations considerably with a - * light Cordic algorithm (see afangles.c). - */ - - typedef FT_Int AF_Angle; - - -#define AF_ANGLE_PI 256 -#define AF_ANGLE_2PI ( AF_ANGLE_PI * 2 ) -#define AF_ANGLE_PI2 ( AF_ANGLE_PI / 2 ) -#define AF_ANGLE_PI4 ( AF_ANGLE_PI / 4 ) - - -#if 0 - /* - * compute the angle of a given 2-D vector - */ - FT_LOCAL( AF_Angle ) - af_angle_atan( FT_Pos dx, - FT_Pos dy ); - - - /* - * compute `angle2 - angle1'; the result is always within - * the range [-AF_ANGLE_PI .. AF_ANGLE_PI - 1] - */ - FT_LOCAL( AF_Angle ) - af_angle_diff( AF_Angle angle1, - AF_Angle angle2 ); -#endif /* 0 */ - - -#define AF_ANGLE_DIFF( result, angle1, angle2 ) \ - FT_BEGIN_STMNT \ - AF_Angle _delta = (angle2) - (angle1); \ - \ - \ - while ( _delta <= -AF_ANGLE_PI ) \ - _delta += AF_ANGLE_2PI; \ - \ - while ( _delta > AF_ANGLE_PI ) \ - _delta -= AF_ANGLE_2PI; \ - \ - result = _delta; \ - FT_END_STMNT - - /* * opaque handle to glyph-specific hints -- see `afhints.h' for more * details @@ -173,18 +115,17 @@ extern void* _af_debug_hints; #define AF_SCALER_FLAG_NO_HORIZONTAL 1U /* disable horizontal hinting */ #define AF_SCALER_FLAG_NO_VERTICAL 2U /* disable vertical hinting */ #define AF_SCALER_FLAG_NO_ADVANCE 4U /* disable advance hinting */ -#define AF_SCALER_FLAG_NO_WARPER 8U /* disable warper */ typedef struct AF_ScalerRec_ { - FT_Face face; /* source font face */ - FT_Fixed x_scale; /* from font units to 1/64th device pixels */ - FT_Fixed y_scale; /* from font units to 1/64th device pixels */ - FT_Pos x_delta; /* in 1/64th device pixels */ - FT_Pos y_delta; /* in 1/64th device pixels */ - FT_Render_Mode render_mode; /* monochrome, anti-aliased, LCD, etc. */ - FT_UInt32 flags; /* additional control flags, see above */ + FT_Face face; /* source font face */ + FT_Fixed x_scale; /* from font units to 1/64 device pixels */ + FT_Fixed y_scale; /* from font units to 1/64 device pixels */ + FT_Pos x_delta; /* in 1/64 device pixels */ + FT_Pos y_delta; /* in 1/64 device pixels */ + FT_Render_Mode render_mode; /* monochrome, anti-aliased, LCD, etc. */ + FT_UInt32 flags; /* additional control flags, see above */ } AF_ScalerRec, *AF_Scaler; @@ -257,7 +198,6 @@ extern void* _af_debug_hints; * outline according to the results of the glyph analyzer. */ -#define AFWRTSYS_H_ /* don't load header files */ #undef WRITING_SYSTEM #define WRITING_SYSTEM( ws, WS ) \ AF_WRITING_SYSTEM_ ## WS, @@ -266,14 +206,12 @@ extern void* _af_debug_hints; typedef enum AF_WritingSystem_ { -#include "afwrtsys.h" +#include "afws-iter.h" AF_WRITING_SYSTEM_MAX /* do not remove */ } AF_WritingSystem; -#undef AFWRTSYS_H_ - typedef struct AF_WritingSystemClassRec_ { diff --git a/src/3rdparty/freetype/src/autofit/afwarp.c b/src/3rdparty/freetype/src/autofit/afwarp.c deleted file mode 100644 index 84e9753ad9..0000000000 --- a/src/3rdparty/freetype/src/autofit/afwarp.c +++ /dev/null @@ -1,373 +0,0 @@ -/**************************************************************************** - * - * afwarp.c - * - * Auto-fitter warping algorithm (body). - * - * Copyright (C) 2006-2019 by - * David Turner, Robert Wilhelm, and Werner Lemberg. - * - * This file is part of the FreeType project, and may only be used, - * modified, and distributed under the terms of the FreeType project - * license, LICENSE.TXT. By continuing to use, modify, or distribute - * this file you indicate that you have read the license and - * understand and accept it fully. - * - */ - - - /* - * The idea of the warping code is to slightly scale and shift a glyph - * within a single dimension so that as much of its segments are aligned - * (more or less) on the grid. To find out the optimal scaling and - * shifting value, various parameter combinations are tried and scored. - */ - -#include "afwarp.h" - -#ifdef AF_CONFIG_OPTION_USE_WARPER - - /************************************************************************** - * - * The macro FT_COMPONENT is used in trace mode. It is an implicit - * parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log - * messages during execution. - */ -#undef FT_COMPONENT -#define FT_COMPONENT afwarp - - - /* The weights cover the range 0/64 - 63/64 of a pixel. Obviously, */ - /* values around a half pixel (which means exactly between two grid */ - /* lines) gets the worst weight. */ -#if 1 - static const AF_WarpScore - af_warper_weights[64] = - { - 35, 32, 30, 25, 20, 15, 12, 10, 5, 1, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, -1, -2, -5, -8,-10,-10,-20,-20,-30,-30, - - -30,-30,-20,-20,-10,-10, -8, -5, -2, -1, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 1, 5, 10, 12, 15, 20, 25, 30, 32, - }; -#else - static const AF_WarpScore - af_warper_weights[64] = - { - 30, 20, 10, 5, 4, 4, 3, 2, 1, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, -1, -2, -2, -5, -5,-10,-10,-15,-20, - - -20,-15,-15,-10,-10, -5, -5, -2, -2, -1, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 4, 5, 10, 20, - }; -#endif - - - /* Score segments for a given `scale' and `delta' in the range */ - /* `xx1' to `xx2', and store the best result in `warper'. If */ - /* the new best score is equal to the old one, prefer the */ - /* value with a smaller distortion (around `base_distort'). */ - - static void - af_warper_compute_line_best( AF_Warper warper, - FT_Fixed scale, - FT_Pos delta, - FT_Pos xx1, - FT_Pos xx2, - AF_WarpScore base_distort, - AF_Segment segments, - FT_Int num_segments ) - { - FT_Int idx_min, idx_max, idx0; - FT_Int nn; - AF_WarpScore scores[65]; - - - for ( nn = 0; nn < 65; nn++ ) - scores[nn] = 0; - - idx0 = xx1 - warper->t1; - - /* compute minimum and maximum indices */ - { - FT_Pos xx1min = warper->x1min; - FT_Pos xx1max = warper->x1max; - FT_Pos w = xx2 - xx1; - - - if ( xx1min + w < warper->x2min ) - xx1min = warper->x2min - w; - - if ( xx1max + w > warper->x2max ) - xx1max = warper->x2max - w; - - idx_min = xx1min - warper->t1; - idx_max = xx1max - warper->t1; - - if ( idx_min < 0 || idx_min > idx_max || idx_max > 64 ) - { - FT_TRACE5(( "invalid indices:\n" - " min=%d max=%d, xx1=%ld xx2=%ld,\n" - " x1min=%ld x1max=%ld, x2min=%ld x2max=%ld\n", - idx_min, idx_max, xx1, xx2, - warper->x1min, warper->x1max, - warper->x2min, warper->x2max )); - return; - } - } - - for ( nn = 0; nn < num_segments; nn++ ) - { - FT_Pos len = segments[nn].max_coord - segments[nn].min_coord; - FT_Pos y0 = FT_MulFix( segments[nn].pos, scale ) + delta; - FT_Pos y = y0 + ( idx_min - idx0 ); - FT_Int idx; - - - /* score the length of the segments for the given range */ - for ( idx = idx_min; idx <= idx_max; idx++, y++ ) - scores[idx] += af_warper_weights[y & 63] * len; - } - - /* find best score */ - { - FT_Int idx; - - - for ( idx = idx_min; idx <= idx_max; idx++ ) - { - AF_WarpScore score = scores[idx]; - AF_WarpScore distort = base_distort + ( idx - idx0 ); - - - if ( score > warper->best_score || - ( score == warper->best_score && - distort < warper->best_distort ) ) - { - warper->best_score = score; - warper->best_distort = distort; - warper->best_scale = scale; - warper->best_delta = delta + ( idx - idx0 ); - } - } - } - } - - - /* Compute optimal scaling and delta values for a given glyph and */ - /* dimension. */ - - FT_LOCAL_DEF( void ) - af_warper_compute( AF_Warper warper, - AF_GlyphHints hints, - AF_Dimension dim, - FT_Fixed *a_scale, - FT_Pos *a_delta ) - { - AF_AxisHints axis; - AF_Point points; - - FT_Fixed org_scale; - FT_Pos org_delta; - - FT_Int nn, num_points, num_segments; - FT_Int X1, X2; - FT_Int w; - - AF_WarpScore base_distort; - AF_Segment segments; - - - /* get original scaling transformation */ - if ( dim == AF_DIMENSION_VERT ) - { - org_scale = hints->y_scale; - org_delta = hints->y_delta; - } - else - { - org_scale = hints->x_scale; - org_delta = hints->x_delta; - } - - warper->best_scale = org_scale; - warper->best_delta = org_delta; - warper->best_score = FT_INT_MIN; - warper->best_distort = 0; - - axis = &hints->axis[dim]; - segments = axis->segments; - num_segments = axis->num_segments; - points = hints->points; - num_points = hints->num_points; - - *a_scale = org_scale; - *a_delta = org_delta; - - /* get X1 and X2, minimum and maximum in original coordinates */ - if ( num_segments < 1 ) - return; - -#if 1 - X1 = X2 = points[0].fx; - for ( nn = 1; nn < num_points; nn++ ) - { - FT_Int X = points[nn].fx; - - - if ( X < X1 ) - X1 = X; - if ( X > X2 ) - X2 = X; - } -#else - X1 = X2 = segments[0].pos; - for ( nn = 1; nn < num_segments; nn++ ) - { - FT_Int X = segments[nn].pos; - - - if ( X < X1 ) - X1 = X; - if ( X > X2 ) - X2 = X; - } -#endif - - if ( X1 >= X2 ) - return; - - warper->x1 = FT_MulFix( X1, org_scale ) + org_delta; - warper->x2 = FT_MulFix( X2, org_scale ) + org_delta; - - warper->t1 = AF_WARPER_FLOOR( warper->x1 ); - warper->t2 = AF_WARPER_CEIL( warper->x2 ); - - /* examine a half pixel wide range around the maximum coordinates */ - warper->x1min = warper->x1 & ~31; - warper->x1max = warper->x1min + 32; - warper->x2min = warper->x2 & ~31; - warper->x2max = warper->x2min + 32; - - if ( warper->x1max > warper->x2 ) - warper->x1max = warper->x2; - - if ( warper->x2min < warper->x1 ) - warper->x2min = warper->x1; - - warper->w0 = warper->x2 - warper->x1; - - if ( warper->w0 <= 64 ) - { - warper->x1max = warper->x1; - warper->x2min = warper->x2; - } - - /* examine (at most) a pixel wide range around the natural width */ - warper->wmin = warper->x2min - warper->x1max; - warper->wmax = warper->x2max - warper->x1min; - -#if 1 - /* some heuristics to reduce the number of widths to be examined */ - { - int margin = 16; - - - if ( warper->w0 <= 128 ) - { - margin = 8; - if ( warper->w0 <= 96 ) - margin = 4; - } - - if ( warper->wmin < warper->w0 - margin ) - warper->wmin = warper->w0 - margin; - - if ( warper->wmax > warper->w0 + margin ) - warper->wmax = warper->w0 + margin; - } - - if ( warper->wmin < warper->w0 * 3 / 4 ) - warper->wmin = warper->w0 * 3 / 4; - - if ( warper->wmax > warper->w0 * 5 / 4 ) - warper->wmax = warper->w0 * 5 / 4; -#else - /* no scaling, just translation */ - warper->wmin = warper->wmax = warper->w0; -#endif - - for ( w = warper->wmin; w <= warper->wmax; w++ ) - { - FT_Fixed new_scale; - FT_Pos new_delta; - FT_Pos xx1, xx2; - - - /* compute min and max positions for given width, */ - /* assuring that they stay within the coordinate ranges */ - xx1 = warper->x1; - xx2 = warper->x2; - if ( w >= warper->w0 ) - { - xx1 -= w - warper->w0; - if ( xx1 < warper->x1min ) - { - xx2 += warper->x1min - xx1; - xx1 = warper->x1min; - } - } - else - { - xx1 -= w - warper->w0; - if ( xx1 > warper->x1max ) - { - xx2 -= xx1 - warper->x1max; - xx1 = warper->x1max; - } - } - - if ( xx1 < warper->x1 ) - base_distort = warper->x1 - xx1; - else - base_distort = xx1 - warper->x1; - - if ( xx2 < warper->x2 ) - base_distort += warper->x2 - xx2; - else - base_distort += xx2 - warper->x2; - - /* give base distortion a greater weight while scoring */ - base_distort *= 10; - - new_scale = org_scale + FT_DivFix( w - warper->w0, X2 - X1 ); - new_delta = xx1 - FT_MulFix( X1, new_scale ); - - af_warper_compute_line_best( warper, new_scale, new_delta, xx1, xx2, - base_distort, - segments, num_segments ); - } - - { - FT_Fixed best_scale = warper->best_scale; - FT_Pos best_delta = warper->best_delta; - - - hints->xmin_delta = FT_MulFix( X1, best_scale - org_scale ) - + best_delta; - hints->xmax_delta = FT_MulFix( X2, best_scale - org_scale ) - + best_delta; - - *a_scale = best_scale; - *a_delta = best_delta; - } - } - -#else /* !AF_CONFIG_OPTION_USE_WARPER */ - - /* ANSI C doesn't like empty source files */ - typedef int _af_warp_dummy; - -#endif /* !AF_CONFIG_OPTION_USE_WARPER */ - -/* END */ diff --git a/src/3rdparty/freetype/src/autofit/afwarp.h b/src/3rdparty/freetype/src/autofit/afwarp.h deleted file mode 100644 index 9a2c9a42c1..0000000000 --- a/src/3rdparty/freetype/src/autofit/afwarp.h +++ /dev/null @@ -1,66 +0,0 @@ -/**************************************************************************** - * - * afwarp.h - * - * Auto-fitter warping algorithm (specification). - * - * Copyright (C) 2006-2019 by - * David Turner, Robert Wilhelm, and Werner Lemberg. - * - * This file is part of the FreeType project, and may only be used, - * modified, and distributed under the terms of the FreeType project - * license, LICENSE.TXT. By continuing to use, modify, or distribute - * this file you indicate that you have read the license and - * understand and accept it fully. - * - */ - - -#ifndef AFWARP_H_ -#define AFWARP_H_ - -#include "afhints.h" - -FT_BEGIN_HEADER - -#define AF_WARPER_SCALE - -#define AF_WARPER_FLOOR( x ) ( (x) & ~FT_TYPEOF( x )63 ) -#define AF_WARPER_CEIL( x ) AF_WARPER_FLOOR( (x) + 63 ) - - - typedef FT_Int32 AF_WarpScore; - - typedef struct AF_WarperRec_ - { - FT_Pos x1, x2; - FT_Pos t1, t2; - FT_Pos x1min, x1max; - FT_Pos x2min, x2max; - FT_Pos w0, wmin, wmax; - - FT_Fixed best_scale; - FT_Pos best_delta; - AF_WarpScore best_score; - AF_WarpScore best_distort; - - } AF_WarperRec, *AF_Warper; - - -#ifdef AF_CONFIG_OPTION_USE_WARPER - FT_LOCAL( void ) - af_warper_compute( AF_Warper warper, - AF_GlyphHints hints, - AF_Dimension dim, - FT_Fixed *a_scale, - FT_Pos *a_delta ); -#endif - - -FT_END_HEADER - - -#endif /* AFWARP_H_ */ - - -/* END */ diff --git a/src/3rdparty/freetype/src/autofit/afwrtsys.h b/src/3rdparty/freetype/src/autofit/afwrtsys.h deleted file mode 100644 index 5611cf441a..0000000000 --- a/src/3rdparty/freetype/src/autofit/afwrtsys.h +++ /dev/null @@ -1,52 +0,0 @@ -/**************************************************************************** - * - * afwrtsys.h - * - * Auto-fitter writing systems (specification only). - * - * Copyright (C) 2013-2019 by - * David Turner, Robert Wilhelm, and Werner Lemberg. - * - * This file is part of the FreeType project, and may only be used, - * modified, and distributed under the terms of the FreeType project - * license, LICENSE.TXT. By continuing to use, modify, or distribute - * this file you indicate that you have read the license and - * understand and accept it fully. - * - */ - - -#ifndef AFWRTSYS_H_ -#define AFWRTSYS_H_ - - /* Since preprocessor directives can't create other preprocessor */ - /* directives, we have to include the header files manually. */ - -#include "afdummy.h" -#include "aflatin.h" -#include "afcjk.h" -#include "afindic.h" -#ifdef FT_OPTION_AUTOFIT2 -#include "aflatin2.h" -#endif - -#endif /* AFWRTSYS_H_ */ - - - /* The following part can be included multiple times. */ - /* Define `WRITING_SYSTEM' as needed. */ - - - /* Add new writing systems here. The arguments are the writing system */ - /* name in lowercase and uppercase, respectively. */ - - WRITING_SYSTEM( dummy, DUMMY ) - WRITING_SYSTEM( latin, LATIN ) - WRITING_SYSTEM( cjk, CJK ) - WRITING_SYSTEM( indic, INDIC ) -#ifdef FT_OPTION_AUTOFIT2 - WRITING_SYSTEM( latin2, LATIN2 ) -#endif - - -/* END */ diff --git a/src/3rdparty/freetype/src/autofit/afws-decl.h b/src/3rdparty/freetype/src/autofit/afws-decl.h new file mode 100644 index 0000000000..48c888afed --- /dev/null +++ b/src/3rdparty/freetype/src/autofit/afws-decl.h @@ -0,0 +1,33 @@ +/**************************************************************************** + * + * afws-decl.h + * + * Auto-fitter writing system declarations (specification only). + * + * Copyright (C) 2013-2023 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef AFWS_DECL_H_ +#define AFWS_DECL_H_ + + /* Since preprocessor directives can't create other preprocessor */ + /* directives, we have to include the header files manually. */ + +#include "afdummy.h" +#include "aflatin.h" +#include "afcjk.h" +#include "afindic.h" + +#endif /* AFWS_DECL_H_ */ + + +/* END */ diff --git a/src/3rdparty/freetype/src/autofit/afws-iter.h b/src/3rdparty/freetype/src/autofit/afws-iter.h new file mode 100644 index 0000000000..a0a686f8ce --- /dev/null +++ b/src/3rdparty/freetype/src/autofit/afws-iter.h @@ -0,0 +1,31 @@ +/**************************************************************************** + * + * afws-iter.h + * + * Auto-fitter writing systems iterator (specification only). + * + * Copyright (C) 2013-2023 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + /* This header may be included multiple times. */ + /* Define `WRITING_SYSTEM' as needed. */ + + + /* Add new writing systems here. The arguments are the writing system */ + /* name in lowercase and uppercase, respectively. */ + + WRITING_SYSTEM( dummy, DUMMY ) + WRITING_SYSTEM( latin, LATIN ) + WRITING_SYSTEM( cjk, CJK ) + WRITING_SYSTEM( indic, INDIC ) + + +/* END */ diff --git a/src/3rdparty/freetype/src/autofit/autofit.c b/src/3rdparty/freetype/src/autofit/autofit.c index facfec1744..8bd609b5e8 100644 --- a/src/3rdparty/freetype/src/autofit/autofit.c +++ b/src/3rdparty/freetype/src/autofit/autofit.c @@ -4,7 +4,7 @@ * * Auto-fitter module (body). * - * Copyright (C) 2003-2019 by + * Copyright (C) 2003-2023 by * David Turner, Robert Wilhelm, and Werner Lemberg. * * This file is part of the FreeType project, and may only be used, @@ -17,9 +17,8 @@ #define FT_MAKE_OPTION_SINGLE_OBJECT -#include <ft2build.h> -#include "afangles.c" +#include "ft-hb.c" #include "afblue.c" #include "afcjk.c" #include "afdummy.c" @@ -27,12 +26,10 @@ #include "afhints.c" #include "afindic.c" #include "aflatin.c" -#include "aflatin2.c" #include "afloader.c" #include "afmodule.c" #include "afranges.c" #include "afshaper.c" -#include "afwarp.c" /* END */ diff --git a/src/3rdparty/freetype/src/autofit/ft-hb.c b/src/3rdparty/freetype/src/autofit/ft-hb.c new file mode 100644 index 0000000000..71aee04550 --- /dev/null +++ b/src/3rdparty/freetype/src/autofit/ft-hb.c @@ -0,0 +1,115 @@ +/* + * Copyright © 2009, 2023 Red Hat, Inc. + * Copyright © 2015 Google, Inc. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod, Matthias Clasen + * Google Author(s): Behdad Esfahbod + */ + +#include <freetype/freetype.h> +#include <freetype/tttables.h> + +#ifdef FT_CONFIG_OPTION_USE_HARFBUZZ + +#include "ft-hb.h" + +/* The following three functions are a more or less verbatim + * copy of corresponding HarfBuzz code from hb-ft.cc + */ + +static hb_blob_t * +hb_ft_reference_table_ (hb_face_t *face, hb_tag_t tag, void *user_data) +{ + FT_Face ft_face = (FT_Face) user_data; + FT_Byte *buffer; + FT_ULong length = 0; + FT_Error error; + + FT_UNUSED (face); + + /* Note: FreeType like HarfBuzz uses the NONE tag for fetching the entire blob */ + + error = FT_Load_Sfnt_Table (ft_face, tag, 0, NULL, &length); + if (error) + return NULL; + + buffer = (FT_Byte *) ft_smalloc (length); + if (!buffer) + return NULL; + + error = FT_Load_Sfnt_Table (ft_face, tag, 0, buffer, &length); + if (error) + { + free (buffer); + return NULL; + } + + return hb_blob_create ((const char *) buffer, length, + HB_MEMORY_MODE_WRITABLE, + buffer, ft_sfree); +} + +static hb_face_t * +hb_ft_face_create_ (FT_Face ft_face, + hb_destroy_func_t destroy) +{ + hb_face_t *face; + + if (!ft_face->stream->read) { + hb_blob_t *blob; + + blob = hb_blob_create ((const char *) ft_face->stream->base, + (unsigned int) ft_face->stream->size, + HB_MEMORY_MODE_READONLY, + ft_face, destroy); + face = hb_face_create (blob, ft_face->face_index); + hb_blob_destroy (blob); + } else { + face = hb_face_create_for_tables (hb_ft_reference_table_, ft_face, destroy); + } + + hb_face_set_index (face, ft_face->face_index); + hb_face_set_upem (face, ft_face->units_per_EM); + + return face; +} + +FT_LOCAL_DEF(hb_font_t *) +hb_ft_font_create_ (FT_Face ft_face, + hb_destroy_func_t destroy) +{ + hb_font_t *font; + hb_face_t *face; + + face = hb_ft_face_create_ (ft_face, destroy); + font = hb_font_create (face); + hb_face_destroy (face); + return font; +} + +#else /* !FT_CONFIG_OPTION_USE_HARFBUZZ */ + +/* ANSI C doesn't like empty source files */ +typedef int ft_hb_dummy_; + +#endif /* !FT_CONFIG_OPTION_USE_HARFBUZZ */ + +/* END */ diff --git a/src/3rdparty/freetype/src/autofit/ft-hb.h b/src/3rdparty/freetype/src/autofit/ft-hb.h new file mode 100644 index 0000000000..92a5774bc4 --- /dev/null +++ b/src/3rdparty/freetype/src/autofit/ft-hb.h @@ -0,0 +1,48 @@ +/* + * Copyright © 2009, 2023 Red Hat, Inc. + * Copyright © 2015 Google, Inc. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod, Matthias Clasen + * Google Author(s): Behdad Esfahbod + */ + +#ifndef FT_HB_H +#define FT_HB_H + +#include <hb.h> + +#include <freetype/internal/compiler-macros.h> +#include <freetype/freetype.h> + + +FT_BEGIN_HEADER + +FT_LOCAL(hb_font_t *) +hb_ft_font_create_ (FT_Face ft_face, + hb_destroy_func_t destroy); + + +FT_END_HEADER + +#endif /* FT_HB_H */ + + +/* END */ diff --git a/src/3rdparty/freetype/src/autofit/hbshim.c b/src/3rdparty/freetype/src/autofit/hbshim.c deleted file mode 100644 index 7a45059c39..0000000000 --- a/src/3rdparty/freetype/src/autofit/hbshim.c +++ /dev/null @@ -1,546 +0,0 @@ -/***************************************************************************/ -/* */ -/* hbshim.c */ -/* */ -/* HarfBuzz interface for accessing OpenType features (body). */ -/* */ -/* Copyright 2013-2015 by */ -/* David Turner, Robert Wilhelm, and Werner Lemberg. */ -/* */ -/* This file is part of the FreeType project, and may only be used, */ -/* modified, and distributed under the terms of the FreeType project */ -/* license, LICENSE.TXT. By continuing to use, modify, or distribute */ -/* this file you indicate that you have read the license and */ -/* understand and accept it fully. */ -/* */ -/***************************************************************************/ - - -#include <ft2build.h> -#include FT_FREETYPE_H -#include "afglobal.h" -#include "aftypes.h" -#include "hbshim.h" - -#ifdef FT_CONFIG_OPTION_USE_HARFBUZZ - - - /*************************************************************************/ - /* */ - /* The macro FT_COMPONENT is used in trace mode. It is an implicit */ - /* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */ - /* messages during execution. */ - /* */ -#undef FT_COMPONENT -#define FT_COMPONENT trace_afharfbuzz - - - /* - * We use `sets' (in the HarfBuzz sense, which comes quite near to the - * usual mathematical meaning) to manage both lookups and glyph indices. - * - * 1. For each coverage, collect lookup IDs in a set. Note that an - * auto-hinter `coverage' is represented by one `feature', and a - * feature consists of an arbitrary number of (font specific) `lookup's - * that actually do the mapping job. Please check the OpenType - * specification for more details on features and lookups. - * - * 2. Create glyph ID sets from the corresponding lookup sets. - * - * 3. The glyph set corresponding to AF_COVERAGE_DEFAULT is computed - * with all lookups specific to the OpenType script activated. It - * relies on the order of AF_DEFINE_STYLE_CLASS entries so that - * special coverages (like `oldstyle figures') don't get overwritten. - * - */ - - - /* load coverage tags */ -#undef COVERAGE -#define COVERAGE( name, NAME, description, \ - tag1, tag2, tag3, tag4 ) \ - static const hb_tag_t name ## _coverage[] = \ - { \ - HB_TAG( tag1, tag2, tag3, tag4 ), \ - HB_TAG_NONE \ - }; - - -#include "afcover.h" - - - /* define mapping between coverage tags and AF_Coverage */ -#undef COVERAGE -#define COVERAGE( name, NAME, description, \ - tag1, tag2, tag3, tag4 ) \ - name ## _coverage, - - - static const hb_tag_t* coverages[] = - { -#include "afcover.h" - - NULL /* AF_COVERAGE_DEFAULT */ - }; - - - /* load HarfBuzz script tags */ -#undef SCRIPT -#define SCRIPT( s, S, d, h, sc1, sc2, sc3 ) h, - - - static const hb_script_t scripts[] = - { -#include "afscript.h" - }; - - - FT_Error - af_get_coverage( AF_FaceGlobals globals, - AF_StyleClass style_class, - FT_UShort* gstyles ) - { - hb_face_t* face; - - hb_set_t* gsub_lookups; /* GSUB lookups for a given script */ - hb_set_t* gsub_glyphs; /* glyphs covered by GSUB lookups */ - hb_set_t* gpos_lookups; /* GPOS lookups for a given script */ - hb_set_t* gpos_glyphs; /* glyphs covered by GPOS lookups */ - - hb_script_t script; - const hb_tag_t* coverage_tags; - hb_tag_t script_tags[] = { HB_TAG_NONE, - HB_TAG_NONE, - HB_TAG_NONE, - HB_TAG_NONE }; - - hb_codepoint_t idx; -#ifdef FT_DEBUG_LEVEL_TRACE - int count; -#endif - - - if ( !globals || !style_class || !gstyles ) - return FT_THROW( Invalid_Argument ); - - face = hb_font_get_face( globals->hb_font ); - - gsub_lookups = hb_set_create(); - gsub_glyphs = hb_set_create(); - gpos_lookups = hb_set_create(); - gpos_glyphs = hb_set_create(); - - coverage_tags = coverages[style_class->coverage]; - script = scripts[style_class->script]; - - /* Convert a HarfBuzz script tag into the corresponding OpenType */ - /* tag or tags -- some Indic scripts like Devanagari have an old */ - /* and a new set of features. */ - hb_ot_tags_from_script( script, - &script_tags[0], - &script_tags[1] ); - - /* `hb_ot_tags_from_script' usually returns HB_OT_TAG_DEFAULT_SCRIPT */ - /* as the second tag. We change that to HB_TAG_NONE except for the */ - /* default script. */ - if ( style_class->script == globals->module->default_script && - style_class->coverage == AF_COVERAGE_DEFAULT ) - { - if ( script_tags[0] == HB_TAG_NONE ) - script_tags[0] = HB_OT_TAG_DEFAULT_SCRIPT; - else - { - if ( script_tags[1] == HB_TAG_NONE ) - script_tags[1] = HB_OT_TAG_DEFAULT_SCRIPT; - else if ( script_tags[1] != HB_OT_TAG_DEFAULT_SCRIPT ) - script_tags[2] = HB_OT_TAG_DEFAULT_SCRIPT; - } - } - else - { - if ( script_tags[1] == HB_OT_TAG_DEFAULT_SCRIPT ) - script_tags[1] = HB_TAG_NONE; - } - - hb_ot_layout_collect_lookups( face, - HB_OT_TAG_GSUB, - script_tags, - NULL, - coverage_tags, - gsub_lookups ); - - if ( hb_set_is_empty( gsub_lookups ) ) - goto Exit; /* nothing to do */ - - hb_ot_layout_collect_lookups( face, - HB_OT_TAG_GPOS, - script_tags, - NULL, - coverage_tags, - gpos_lookups ); - - FT_TRACE4(( "GSUB lookups (style `%s'):\n" - " ", - af_style_names[style_class->style] )); - -#ifdef FT_DEBUG_LEVEL_TRACE - count = 0; -#endif - - for ( idx = HB_SET_VALUE_INVALID; hb_set_next( gsub_lookups, &idx ); ) - { -#ifdef FT_DEBUG_LEVEL_TRACE - FT_TRACE4(( " %d", idx )); - count++; -#endif - - /* get output coverage of GSUB feature */ - hb_ot_layout_lookup_collect_glyphs( face, - HB_OT_TAG_GSUB, - idx, - NULL, - NULL, - NULL, - gsub_glyphs ); - } - -#ifdef FT_DEBUG_LEVEL_TRACE - if ( !count ) - FT_TRACE4(( " (none)" )); - FT_TRACE4(( "\n\n" )); -#endif - - FT_TRACE4(( "GPOS lookups (style `%s'):\n" - " ", - af_style_names[style_class->style] )); - -#ifdef FT_DEBUG_LEVEL_TRACE - count = 0; -#endif - - for ( idx = HB_SET_VALUE_INVALID; hb_set_next( gpos_lookups, &idx ); ) - { -#ifdef FT_DEBUG_LEVEL_TRACE - FT_TRACE4(( " %d", idx )); - count++; -#endif - - /* get input coverage of GPOS feature */ - hb_ot_layout_lookup_collect_glyphs( face, - HB_OT_TAG_GPOS, - idx, - NULL, - gpos_glyphs, - NULL, - NULL ); - } - -#ifdef FT_DEBUG_LEVEL_TRACE - if ( !count ) - FT_TRACE4(( " (none)" )); - FT_TRACE4(( "\n\n" )); -#endif - - /* - * We now check whether we can construct blue zones, using glyphs - * covered by the feature only. In case there is not a single zone - * (this is, not a single character is covered), we skip this coverage. - * - */ - if ( style_class->coverage != AF_COVERAGE_DEFAULT ) - { - AF_Blue_Stringset bss = style_class->blue_stringset; - const AF_Blue_StringRec* bs = &af_blue_stringsets[bss]; - - FT_Bool found = 0; - - - for ( ; bs->string != AF_BLUE_STRING_MAX; bs++ ) - { - const char* p = &af_blue_strings[bs->string]; - - - while ( *p ) - { - hb_codepoint_t ch; - - - GET_UTF8_CHAR( ch, p ); - - for ( idx = HB_SET_VALUE_INVALID; hb_set_next( gsub_lookups, - &idx ); ) - { - hb_codepoint_t gidx = FT_Get_Char_Index( globals->face, ch ); - - - if ( hb_ot_layout_lookup_would_substitute( face, idx, - &gidx, 1, 1 ) ) - { - found = 1; - break; - } - } - } - } - - if ( !found ) - { - FT_TRACE4(( " no blue characters found; style skipped\n" )); - goto Exit; - } - } - - /* - * Various OpenType features might use the same glyphs at different - * vertical positions; for example, superscript and subscript glyphs - * could be the same. However, the auto-hinter is completely - * agnostic of OpenType features after the feature analysis has been - * completed: The engine then simply receives a glyph index and returns a - * hinted and usually rendered glyph. - * - * Consider the superscript feature of font `pala.ttf': Some of the - * glyphs are `real', this is, they have a zero vertical offset, but - * most of them are small caps glyphs shifted up to the superscript - * position (this is, the `sups' feature is present in both the GSUB and - * GPOS tables). The code for blue zones computation actually uses a - * feature's y offset so that the `real' glyphs get correct hints. But - * later on it is impossible to decide whether a glyph index belongs to, - * say, the small caps or superscript feature. - * - * For this reason, we don't assign a style to a glyph if the current - * feature covers the glyph in both the GSUB and the GPOS tables. This - * is quite a broad condition, assuming that - * - * (a) glyphs that get used in multiple features are present in a - * feature without vertical shift, - * - * and - * - * (b) a feature's GPOS data really moves the glyph vertically. - * - * Not fulfilling condition (a) makes a font larger; it would also - * reduce the number of glyphs that could be addressed directly without - * using OpenType features, so this assumption is rather strong. - * - * Condition (b) is much weaker, and there might be glyphs which get - * missed. However, the OpenType features we are going to handle are - * primarily located in GSUB, and HarfBuzz doesn't provide an API to - * directly get the necessary information from the GPOS table. A - * possible solution might be to directly parse the GPOS table to find - * out whether a glyph gets shifted vertically, but this is something I - * would like to avoid if not really necessary. - * - * Note that we don't follow this logic for the default coverage. - * Complex scripts like Devanagari have mandatory GPOS features to - * position many glyph elements, using mark-to-base or mark-to-ligature - * tables; the number of glyphs missed due to condition (b) would be far - * too large. - * - */ - if ( style_class->coverage != AF_COVERAGE_DEFAULT ) - hb_set_subtract( gsub_glyphs, gpos_glyphs ); - -#ifdef FT_DEBUG_LEVEL_TRACE - FT_TRACE4(( " glyphs without GPOS data (`*' means already assigned)" )); - count = 0; -#endif - - for ( idx = HB_SET_VALUE_INVALID; hb_set_next( gsub_glyphs, &idx ); ) - { -#ifdef FT_DEBUG_LEVEL_TRACE - if ( !( count % 10 ) ) - FT_TRACE4(( "\n" - " " )); - - FT_TRACE4(( " %d", idx )); - count++; -#endif - - /* glyph indices returned by `hb_ot_layout_lookup_collect_glyphs' */ - /* can be arbitrary: some fonts use fake indices for processing */ - /* internal to GSUB or GPOS, which is fully valid */ - if ( idx >= (hb_codepoint_t)globals->glyph_count ) - continue; - - if ( gstyles[idx] == AF_STYLE_UNASSIGNED ) - gstyles[idx] = (FT_UShort)style_class->style; -#ifdef FT_DEBUG_LEVEL_TRACE - else - FT_TRACE4(( "*" )); -#endif - } - -#ifdef FT_DEBUG_LEVEL_TRACE - if ( !count ) - FT_TRACE4(( "\n" - " (none)" )); - FT_TRACE4(( "\n\n" )); -#endif - - Exit: - hb_set_destroy( gsub_lookups ); - hb_set_destroy( gsub_glyphs ); - hb_set_destroy( gpos_lookups ); - hb_set_destroy( gpos_glyphs ); - - return FT_Err_Ok; - } - - - /* construct HarfBuzz features */ -#undef COVERAGE -#define COVERAGE( name, NAME, description, \ - tag1, tag2, tag3, tag4 ) \ - static const hb_feature_t name ## _feature[] = \ - { \ - { \ - HB_TAG( tag1, tag2, tag3, tag4 ), \ - 1, 0, (unsigned int)-1 \ - } \ - }; - - -#include "afcover.h" - - - /* define mapping between HarfBuzz features and AF_Coverage */ -#undef COVERAGE -#define COVERAGE( name, NAME, description, \ - tag1, tag2, tag3, tag4 ) \ - name ## _feature, - - - static const hb_feature_t* features[] = - { -#include "afcover.h" - - NULL /* AF_COVERAGE_DEFAULT */ - }; - - - FT_Error - af_get_char_index( AF_StyleMetrics metrics, - FT_ULong charcode, - FT_ULong *codepoint, - FT_Long *y_offset ) - { - AF_StyleClass style_class; - - const hb_feature_t* feature; - - FT_ULong in_idx, out_idx; - - - if ( !metrics ) - return FT_THROW( Invalid_Argument ); - - in_idx = FT_Get_Char_Index( metrics->globals->face, charcode ); - - style_class = metrics->style_class; - - feature = features[style_class->coverage]; - - if ( feature ) - { - FT_Int upem = (FT_Int)metrics->globals->face->units_per_EM; - - hb_font_t* font = metrics->globals->hb_font; - hb_buffer_t* buf = hb_buffer_create(); - - uint32_t c = (uint32_t)charcode; - - hb_glyph_info_t* ginfo; - hb_glyph_position_t* gpos; - unsigned int gcount; - - - /* we shape at a size of units per EM; this means font units */ - hb_font_set_scale( font, upem, upem ); - - /* XXX: is this sufficient for a single character of any script? */ - hb_buffer_set_direction( buf, HB_DIRECTION_LTR ); - hb_buffer_set_script( buf, scripts[style_class->script] ); - - /* we add one character to `buf' ... */ - hb_buffer_add_utf32( buf, &c, 1, 0, 1 ); - - /* ... and apply one feature */ - hb_shape( font, buf, feature, 1 ); - - ginfo = hb_buffer_get_glyph_infos( buf, &gcount ); - gpos = hb_buffer_get_glyph_positions( buf, &gcount ); - - out_idx = ginfo[0].codepoint; - - /* getting the same index indicates no substitution, */ - /* which means that the glyph isn't available in the feature */ - if ( in_idx == out_idx ) - { - *codepoint = 0; - *y_offset = 0; - } - else - { - *codepoint = out_idx; - *y_offset = gpos[0].y_offset; - } - - hb_buffer_destroy( buf ); - -#ifdef FT_DEBUG_LEVEL_TRACE - if ( gcount > 1 ) - FT_TRACE1(( "af_get_char_index:" - " input character mapped to multiple glyphs\n" )); -#endif - } - else - { - *codepoint = in_idx; - *y_offset = 0; - } - - return FT_Err_Ok; - } - - -#else /* !FT_CONFIG_OPTION_USE_HARFBUZZ */ - - - FT_Error - af_get_coverage( AF_FaceGlobals globals, - AF_StyleClass style_class, - FT_UShort* gstyles ) - { - FT_UNUSED( globals ); - FT_UNUSED( style_class ); - FT_UNUSED( gstyles ); - - return FT_Err_Ok; - } - - - FT_Error - af_get_char_index( AF_StyleMetrics metrics, - FT_ULong charcode, - FT_ULong *codepoint, - FT_Long *y_offset ) - { - FT_Face face; - - - if ( !metrics ) - return FT_THROW( Invalid_Argument ); - - face = metrics->globals->face; - - *codepoint = FT_Get_Char_Index( face, charcode ); - *y_offset = 0; - - return FT_Err_Ok; - } - - -#endif /* !FT_CONFIG_OPTION_USE_HARFBUZZ */ - - -/* END */ diff --git a/src/3rdparty/freetype/src/autofit/hbshim.h b/src/3rdparty/freetype/src/autofit/hbshim.h deleted file mode 100644 index 3824941ca2..0000000000 --- a/src/3rdparty/freetype/src/autofit/hbshim.h +++ /dev/null @@ -1,56 +0,0 @@ -/***************************************************************************/ -/* */ -/* hbshim.h */ -/* */ -/* HarfBuzz interface for accessing OpenType features (specification). */ -/* */ -/* Copyright 2013-2015 by */ -/* David Turner, Robert Wilhelm, and Werner Lemberg. */ -/* */ -/* This file is part of the FreeType project, and may only be used, */ -/* modified, and distributed under the terms of the FreeType project */ -/* license, LICENSE.TXT. By continuing to use, modify, or distribute */ -/* this file you indicate that you have read the license and */ -/* understand and accept it fully. */ -/* */ -/***************************************************************************/ - - -#ifndef __HBSHIM_H__ -#define __HBSHIM_H__ - - -#include <ft2build.h> -#include FT_FREETYPE_H - - -#ifdef FT_CONFIG_OPTION_USE_HARFBUZZ - -#include <hb.h> -#include <hb-ot.h> -#include <hb-ft.h> - -#endif - - -FT_BEGIN_HEADER - - FT_Error - af_get_coverage( AF_FaceGlobals globals, - AF_StyleClass style_class, - FT_UShort* gstyles ); - - FT_Error - af_get_char_index( AF_StyleMetrics metrics, - FT_ULong charcode, - FT_ULong *codepoint, - FT_Long *y_offset ); - - /* */ - -FT_END_HEADER - -#endif /* __HBSHIM_H__ */ - - -/* END */ diff --git a/src/3rdparty/freetype/src/autofit/module.mk b/src/3rdparty/freetype/src/autofit/module.mk index cf77b169f7..95cb20ad24 100644 --- a/src/3rdparty/freetype/src/autofit/module.mk +++ b/src/3rdparty/freetype/src/autofit/module.mk @@ -3,7 +3,7 @@ # -# Copyright (C) 2003-2019 by +# Copyright (C) 2003-2023 by # David Turner, Robert Wilhelm, and Werner Lemberg. # # This file is part of the FreeType project, and may only be used, modified, diff --git a/src/3rdparty/freetype/src/autofit/rules.mk b/src/3rdparty/freetype/src/autofit/rules.mk index c59da33a55..a46ba3f0f1 100644 --- a/src/3rdparty/freetype/src/autofit/rules.mk +++ b/src/3rdparty/freetype/src/autofit/rules.mk @@ -3,7 +3,7 @@ # -# Copyright (C) 2003-2019 by +# Copyright (C) 2003-2023 by # David Turner, Robert Wilhelm, and Werner Lemberg. # # This file is part of the FreeType project, and may only be used, modified, @@ -28,8 +28,7 @@ AUTOF_COMPILE := $(CC) $(ANSIFLAGS) \ # AUTOF driver sources (i.e., C files) # -AUTOF_DRV_SRC := $(AUTOF_DIR)/afangles.c \ - $(AUTOF_DIR)/afblue.c \ +AUTOF_DRV_SRC := $(AUTOF_DIR)/afblue.c \ $(AUTOF_DIR)/afcjk.c \ $(AUTOF_DIR)/afdummy.c \ $(AUTOF_DIR)/afglobal.c \ @@ -40,17 +39,18 @@ AUTOF_DRV_SRC := $(AUTOF_DIR)/afangles.c \ $(AUTOF_DIR)/afmodule.c \ $(AUTOF_DIR)/afranges.c \ $(AUTOF_DIR)/afshaper.c \ - $(AUTOF_DIR)/afwarp.c + $(AUTOF_DIR)/ft-hb.c # AUTOF driver headers # -AUTOF_DRV_H := $(AUTOF_DRV_SRC:%c=%h) \ - $(AUTOF_DIR)/afcover.h \ - $(AUTOF_DIR)/aferrors.h \ - $(AUTOF_DIR)/afscript.h \ - $(AUTOF_DIR)/afstyles.h \ - $(AUTOF_DIR)/aftypes.h \ - $(AUTOF_DIR)/afwrtsys.h +AUTOF_DRV_H := $(AUTOF_DRV_SRC:%c=%h) \ + $(AUTOF_DIR)/afcover.h \ + $(AUTOF_DIR)/aferrors.h \ + $(AUTOF_DIR)/afscript.h \ + $(AUTOF_DIR)/afstyles.h \ + $(AUTOF_DIR)/aftypes.h \ + $(AUTOF_DIR)/afws-decl.h \ + $(AUTOF_DIR)/afws-iter.h # AUTOF driver object(s) |