diff options
Diffstat (limited to 'src/3rdparty/libjpeg/src/jchuff.c')
-rw-r--r-- | src/3rdparty/libjpeg/src/jchuff.c | 222 |
1 files changed, 128 insertions, 94 deletions
diff --git a/src/3rdparty/libjpeg/src/jchuff.c b/src/3rdparty/libjpeg/src/jchuff.c index 8ff817b151..488c9b5c3a 100644 --- a/src/3rdparty/libjpeg/src/jchuff.c +++ b/src/3rdparty/libjpeg/src/jchuff.c @@ -3,11 +3,14 @@ * * This file was part of the Independent JPEG Group's software: * Copyright (C) 1991-1997, Thomas G. Lane. + * Lossless JPEG Modifications: + * Copyright (C) 1999, Ken Murchison. * libjpeg-turbo Modifications: - * Copyright (C) 2009-2011, 2014-2016, 2018-2021, D. R. Commander. + * Copyright (C) 2009-2011, 2014-2016, 2018-2024, D. R. Commander. * Copyright (C) 2015, Matthieu Darbois. * Copyright (C) 2018, Matthias Räncker. * Copyright (C) 2020, Arm Limited. + * Copyright (C) 2022, Felix Hanau. * For conditions of distribution and use, see the accompanying README.ijg * file. * @@ -26,44 +29,13 @@ #define JPEG_INTERNALS #include "jinclude.h" #include "jpeglib.h" +#ifdef WITH_SIMD #include "jsimd.h" -#include "jconfigint.h" -#include <limits.h> - -/* - * NOTE: If USE_CLZ_INTRINSIC is defined, then clz/bsr instructions will be - * used for bit counting rather than the lookup table. This will reduce the - * memory footprint by 64k, which is important for some mobile applications - * that create many isolated instances of libjpeg-turbo (web browsers, for - * instance.) This may improve performance on some mobile platforms as well. - * This feature is enabled by default only on Arm processors, because some x86 - * chips have a slow implementation of bsr, and the use of clz/bsr cannot be - * shown to have a significant performance impact even on the x86 chips that - * have a fast implementation of it. When building for Armv6, you can - * explicitly disable the use of clz/bsr by adding -mthumb to the compiler - * flags (this defines __thumb__). - */ - -/* NOTE: Both GCC and Clang define __GNUC__ */ -#if (defined(__GNUC__) && (defined(__arm__) || defined(__aarch64__))) || \ - defined(_M_ARM) || defined(_M_ARM64) -#if !defined(__thumb__) || defined(__thumb2__) -#define USE_CLZ_INTRINSIC -#endif -#endif - -#ifdef USE_CLZ_INTRINSIC -#if defined(_MSC_VER) && !defined(__clang__) -#define JPEG_NBITS_NONZERO(x) (32 - _CountLeadingZeros(x)) -#else -#define JPEG_NBITS_NONZERO(x) (32 - __builtin_clz(x)) -#endif -#define JPEG_NBITS(x) (x ? JPEG_NBITS_NONZERO(x) : 0) #else -#include "jpeg_nbits_table.h" -#define JPEG_NBITS(x) (jpeg_nbits_table[x]) -#define JPEG_NBITS_NONZERO(x) JPEG_NBITS(x) +#include "jchuff.h" /* Declarations shared with jc*huff.c */ #endif +#include <limits.h> +#include "jpeg_nbits.h" /* Expanded entropy encoder object for Huffman encoding. @@ -102,7 +74,9 @@ typedef bit_buf_type simd_bit_buf_type; typedef struct { union { bit_buf_type c; +#ifdef WITH_SIMD simd_bit_buf_type simd; +#endif } put_buffer; /* current bit accumulation buffer */ int free_bits; /* # of bits available in it */ /* (Neon GAS: # of bits now in it) */ @@ -127,7 +101,9 @@ typedef struct { long *ac_count_ptrs[NUM_HUFF_TBLS]; #endif +#ifdef WITH_SIMD int simd; +#endif } huff_entropy_encoder; typedef huff_entropy_encoder *huff_entropy_ptr; @@ -141,7 +117,9 @@ typedef struct { size_t free_in_buffer; /* # of byte spaces remaining in buffer */ savable_state cur; /* Current bit buffer & DC state */ j_compress_ptr cinfo; /* dump_buffer needs access to this */ +#ifdef WITH_SIMD int simd; +#endif } working_state; @@ -180,7 +158,9 @@ start_pass_huff(j_compress_ptr cinfo, boolean gather_statistics) entropy->pub.finish_pass = finish_pass_huff; } +#ifdef WITH_SIMD entropy->simd = jsimd_can_huff_encode_one_block(); +#endif for (ci = 0; ci < cinfo->comps_in_scan; ci++) { compptr = cinfo->cur_comp_info[ci]; @@ -200,12 +180,12 @@ start_pass_huff(j_compress_ptr cinfo, boolean gather_statistics) entropy->dc_count_ptrs[dctbl] = (long *) (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE, 257 * sizeof(long)); - MEMZERO(entropy->dc_count_ptrs[dctbl], 257 * sizeof(long)); + memset(entropy->dc_count_ptrs[dctbl], 0, 257 * sizeof(long)); if (entropy->ac_count_ptrs[actbl] == NULL) entropy->ac_count_ptrs[actbl] = (long *) (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE, 257 * sizeof(long)); - MEMZERO(entropy->ac_count_ptrs[actbl], 257 * sizeof(long)); + memset(entropy->ac_count_ptrs[actbl], 0, 257 * sizeof(long)); #endif } else { /* Compute derived values for Huffman tables */ @@ -220,6 +200,7 @@ start_pass_huff(j_compress_ptr cinfo, boolean gather_statistics) } /* Initialize bit buffer to empty */ +#ifdef WITH_SIMD if (entropy->simd) { entropy->saved.put_buffer.simd = 0; #if defined(__aarch64__) && !defined(NEON_INTRINSICS) @@ -227,7 +208,9 @@ start_pass_huff(j_compress_ptr cinfo, boolean gather_statistics) #else entropy->saved.free_bits = SIMD_BIT_BUF_SIZE; #endif - } else { + } else +#endif + { entropy->saved.put_buffer.c = 0; entropy->saved.free_bits = BIT_BUF_SIZE; } @@ -242,7 +225,7 @@ start_pass_huff(j_compress_ptr cinfo, boolean gather_statistics) * Compute the derived values for a Huffman table. * This routine also performs some validation checks on the table. * - * Note this is also used by jcphuff.c. + * Note this is also used by jcphuff.c and jclhuff.c. */ GLOBAL(void) @@ -315,15 +298,15 @@ jpeg_make_c_derived_tbl(j_compress_ptr cinfo, boolean isDC, int tblno, * this lets us detect duplicate VAL entries here, and later * allows emit_bits to detect any attempt to emit such symbols. */ - MEMZERO(dtbl->ehufco, sizeof(dtbl->ehufco)); - MEMZERO(dtbl->ehufsi, sizeof(dtbl->ehufsi)); + memset(dtbl->ehufco, 0, sizeof(dtbl->ehufco)); + memset(dtbl->ehufsi, 0, sizeof(dtbl->ehufsi)); - /* This is also a convenient place to check for out-of-range - * and duplicated VAL entries. We allow 0..255 for AC symbols - * but only 0..15 for DC. (We could constrain them further - * based on data depth and mode, but this seems enough.) + /* This is also a convenient place to check for out-of-range and duplicated + * VAL entries. We allow 0..255 for AC symbols but only 0..15 for DC in + * lossy mode and 0..16 for DC in lossless mode. (We could constrain them + * further based on data depth and mode, but this seems enough.) */ - maxsymbol = isDC ? 15 : 255; + maxsymbol = isDC ? (cinfo->master->lossless ? 16 : 15) : 255; for (p = 0; p < lastp; p++) { i = htbl->huffval[p]; @@ -478,7 +461,7 @@ dump_buffer(working_state *state) buffer = _buffer; \ while (bytes > 0) { \ bytestocopy = MIN(bytes, state->free_in_buffer); \ - MEMCOPY(state->next_output_byte, buffer, bytestocopy); \ + memcpy(state->next_output_byte, buffer, bytestocopy); \ state->next_output_byte += bytestocopy; \ buffer += bytestocopy; \ state->free_in_buffer -= bytestocopy; \ @@ -500,6 +483,7 @@ flush_bits(working_state *state) simd_bit_buf_type put_buffer; int put_bits; int localbuf = 0; +#ifdef WITH_SIMD if (state->simd) { #if defined(__aarch64__) && !defined(NEON_INTRINSICS) put_bits = state->cur.free_bits; @@ -507,7 +491,9 @@ flush_bits(working_state *state) put_bits = SIMD_BIT_BUF_SIZE - state->cur.free_bits; #endif put_buffer = state->cur.put_buffer.simd; - } else { + } else +#endif + { put_bits = BIT_BUF_SIZE - state->cur.free_bits; put_buffer = state->cur.put_buffer.c; } @@ -525,6 +511,7 @@ flush_bits(working_state *state) EMIT_BYTE(temp) } +#ifdef WITH_SIMD if (state->simd) { /* and reset bit buffer to empty */ state->cur.put_buffer.simd = 0; #if defined(__aarch64__) && !defined(NEON_INTRINSICS) @@ -532,7 +519,9 @@ flush_bits(working_state *state) #else state->cur.free_bits = SIMD_BIT_BUF_SIZE; #endif - } else { + } else +#endif + { state->cur.put_buffer.c = 0; state->cur.free_bits = BIT_BUF_SIZE; } @@ -542,6 +531,8 @@ flush_bits(working_state *state) } +#ifdef WITH_SIMD + /* Encode a single block's worth of coefficients */ LOCAL(boolean) @@ -561,6 +552,8 @@ encode_one_block_simd(working_state *state, JCOEFPTR block, int last_dc_val, return TRUE; } +#endif + LOCAL(boolean) encode_one_block(working_state *state, JCOEFPTR block, int last_dc_val, c_derived_tbl *dctbl, c_derived_tbl *actbl) @@ -569,6 +562,7 @@ encode_one_block(working_state *state, JCOEFPTR block, int last_dc_val, bit_buf_type put_buffer; JOCTET _buffer[BUFSIZE], *buffer; int localbuf = 0; + int max_coef_bits = state->cinfo->data_precision + 2; free_bits = state->cur.free_bits; put_buffer = state->cur.put_buffer.c; @@ -589,6 +583,11 @@ encode_one_block(working_state *state, JCOEFPTR block, int last_dc_val, /* Find the number of bits needed for the magnitude of the coefficient */ nbits = JPEG_NBITS(nbits); + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > max_coef_bits + 1) + ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); /* Emit the Huffman-coded symbol for the number of bits. * Emit that number of bits of the value, if positive, @@ -614,6 +613,9 @@ encode_one_block(working_state *state, JCOEFPTR block, int last_dc_val, temp += nbits; \ nbits ^= temp; \ nbits = JPEG_NBITS_NONZERO(nbits); \ + /* Check for out-of-range coefficient values */ \ + if (nbits > max_coef_bits) \ + ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); \ /* if run length > 15, must emit special run-length-16 codes (0xF0) */ \ while (r >= 16 * 16) { \ r -= 16 * 16; \ @@ -695,7 +697,9 @@ encode_mcu_huff(j_compress_ptr cinfo, JBLOCKROW *MCU_data) state.free_in_buffer = cinfo->dest->free_in_buffer; state.cur = entropy->saved; state.cinfo = cinfo; +#ifdef WITH_SIMD state.simd = entropy->simd; +#endif /* Emit restart marker if needed */ if (cinfo->restart_interval) { @@ -705,6 +709,7 @@ encode_mcu_huff(j_compress_ptr cinfo, JBLOCKROW *MCU_data) } /* Encode the MCU data blocks */ +#ifdef WITH_SIMD if (entropy->simd) { for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { ci = cinfo->MCU_membership[blkn]; @@ -717,7 +722,9 @@ encode_mcu_huff(j_compress_ptr cinfo, JBLOCKROW *MCU_data) /* Update last_dc_val */ state.cur.last_dc_val[ci] = MCU_data[blkn][0][0]; } - } else { + } else +#endif + { for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { ci = cinfo->MCU_membership[blkn]; compptr = cinfo->cur_comp_info[ci]; @@ -765,7 +772,9 @@ finish_pass_huff(j_compress_ptr cinfo) state.free_in_buffer = cinfo->dest->free_in_buffer; state.cur = entropy->saved; state.cinfo = cinfo; +#ifdef WITH_SIMD state.simd = entropy->simd; +#endif /* Flush out the last data */ if (!flush_bits(&state)) @@ -801,6 +810,7 @@ htest_one_block(j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val, register int temp; register int nbits; register int k, r; + int max_coef_bits = cinfo->data_precision + 2; /* Encode the DC coefficient difference per section F.1.2.1 */ @@ -817,7 +827,7 @@ htest_one_block(j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val, /* Check for out-of-range coefficient values. * Since we're encoding a difference, the range limit is twice as much. */ - if (nbits > MAX_COEF_BITS + 1) + if (nbits > max_coef_bits + 1) ERREXIT(cinfo, JERR_BAD_DCT_COEF); /* Count the Huffman symbol for the number of bits */ @@ -846,7 +856,7 @@ htest_one_block(j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val, while ((temp >>= 1)) nbits++; /* Check for out-of-range coefficient values */ - if (nbits > MAX_COEF_BITS) + if (nbits > max_coef_bits) ERREXIT(cinfo, JERR_BAD_DCT_COEF); /* Count Huffman symbol for run length / number of bits */ @@ -901,7 +911,7 @@ encode_mcu_gather(j_compress_ptr cinfo, JBLOCKROW *MCU_data) /* * Generate the best Huffman code table for the given counts, fill htbl. - * Note this is also used by jcphuff.c. + * Note this is also used by jcphuff.c and jclhuff.c. * * The JPEG standard requires that no symbol be assigned a codeword of all * one bits (so that padding bits added at the end of a compressed segment @@ -933,16 +943,20 @@ jpeg_gen_optimal_table(j_compress_ptr cinfo, JHUFF_TBL *htbl, long freq[]) { #define MAX_CLEN 32 /* assumed maximum initial code length */ UINT8 bits[MAX_CLEN + 1]; /* bits[k] = # of symbols with code length k */ + int bit_pos[MAX_CLEN + 1]; /* # of symbols with smaller code length */ int codesize[257]; /* codesize[k] = code length of symbol k */ + int nz_index[257]; /* index of nonzero symbol in the original freq + array */ int others[257]; /* next symbol in current branch of tree */ int c1, c2; int p, i, j; - long v; + int num_nz_symbols; + long v, v2; /* This algorithm is explained in section K.2 of the JPEG standard */ - MEMZERO(bits, sizeof(bits)); - MEMZERO(codesize, sizeof(codesize)); + memset(bits, 0, sizeof(bits)); + memset(codesize, 0, sizeof(codesize)); for (i = 0; i < 257; i++) others[i] = -1; /* init links to empty */ @@ -952,28 +966,41 @@ jpeg_gen_optimal_table(j_compress_ptr cinfo, JHUFF_TBL *htbl, long freq[]) * will be placed last in the largest codeword category. */ + /* Group nonzero frequencies together so we can more easily find the + * smallest. + */ + num_nz_symbols = 0; + for (i = 0; i < 257; i++) { + if (freq[i]) { + nz_index[num_nz_symbols] = i; + freq[num_nz_symbols] = freq[i]; + num_nz_symbols++; + } + } + /* Huffman's basic algorithm to assign optimal code lengths to symbols */ for (;;) { - /* Find the smallest nonzero frequency, set c1 = its symbol */ - /* In case of ties, take the larger symbol number */ + /* Find the two smallest nonzero frequencies; set c1, c2 = their symbols */ + /* In case of ties, take the larger symbol number. Since we have grouped + * the nonzero symbols together, checking for zero symbols is not + * necessary. + */ c1 = -1; - v = 1000000000L; - for (i = 0; i <= 256; i++) { - if (freq[i] && freq[i] <= v) { - v = freq[i]; - c1 = i; - } - } - - /* Find the next smallest nonzero frequency, set c2 = its symbol */ - /* In case of ties, take the larger symbol number */ c2 = -1; v = 1000000000L; - for (i = 0; i <= 256; i++) { - if (freq[i] && freq[i] <= v && i != c1) { - v = freq[i]; - c2 = i; + v2 = 1000000000L; + for (i = 0; i < num_nz_symbols; i++) { + if (freq[i] <= v2) { + if (freq[i] <= v) { + c2 = c1; + v2 = v; + v = freq[i]; + c1 = i; + } else { + v2 = freq[i]; + c2 = i; + } } } @@ -983,7 +1010,10 @@ jpeg_gen_optimal_table(j_compress_ptr cinfo, JHUFF_TBL *htbl, long freq[]) /* Else merge the two counts/trees */ freq[c1] += freq[c2]; - freq[c2] = 0; + /* Set the frequency to a very high value instead of zero, so we don't have + * to check for zero values. + */ + freq[c2] = 1000000001L; /* Increment the codesize of everything in c1's tree branch */ codesize[c1]++; @@ -1003,15 +1033,24 @@ jpeg_gen_optimal_table(j_compress_ptr cinfo, JHUFF_TBL *htbl, long freq[]) } /* Now count the number of symbols of each code length */ - for (i = 0; i <= 256; i++) { - if (codesize[i]) { - /* The JPEG standard seems to think that this can't happen, */ - /* but I'm paranoid... */ - if (codesize[i] > MAX_CLEN) - ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW); - - bits[codesize[i]]++; - } + for (i = 0; i < num_nz_symbols; i++) { + /* The JPEG standard seems to think that this can't happen, */ + /* but I'm paranoid... */ + if (codesize[i] > MAX_CLEN) + ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW); + + bits[codesize[i]]++; + } + + /* Count the number of symbols with a length smaller than i bits, so we can + * construct the symbol table more efficiently. Note that this includes the + * pseudo-symbol 256, but since it is the last symbol, it will not affect the + * table. + */ + p = 0; + for (i = 1; i <= MAX_CLEN; i++) { + bit_pos[i] = p; + p += bits[i]; } /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure @@ -1044,21 +1083,16 @@ jpeg_gen_optimal_table(j_compress_ptr cinfo, JHUFF_TBL *htbl, long freq[]) bits[i]--; /* Return final symbol counts (only for lengths 0..16) */ - MEMCOPY(htbl->bits, bits, sizeof(htbl->bits)); + memcpy(htbl->bits, bits, sizeof(htbl->bits)); /* Return a list of the symbols sorted by code length */ /* It's not real clear to me why we don't need to consider the codelength * changes made above, but Rec. ITU-T T.81 | ISO/IEC 10918-1 seems to think * this works. */ - p = 0; - for (i = 1; i <= MAX_CLEN; i++) { - for (j = 0; j <= 255; j++) { - if (codesize[j] == i) { - htbl->huffval[p] = (UINT8)j; - p++; - } - } + for (i = 0; i < num_nz_symbols - 1; i++) { + htbl->huffval[bit_pos[codesize[i]]] = (UINT8)nz_index[i]; + bit_pos[codesize[i]]++; } /* Set sent_table FALSE so updated table will be written to JPEG file. */ @@ -1083,8 +1117,8 @@ finish_pass_gather(j_compress_ptr cinfo) /* It's important not to apply jpeg_gen_optimal_table more than once * per table, because it clobbers the input frequency counts! */ - MEMZERO(did_dc, sizeof(did_dc)); - MEMZERO(did_ac, sizeof(did_ac)); + memset(did_dc, 0, sizeof(did_dc)); + memset(did_ac, 0, sizeof(did_ac)); for (ci = 0; ci < cinfo->comps_in_scan; ci++) { compptr = cinfo->cur_comp_info[ci]; |