20 files changed, 2 insertions, 6872 deletions

diff --git a/src/gui/painting/painting.pri b/src/gui/painting/painting.pri
index 2925d6acce..b12b2216a7 100644
--- a/src/gui/painting/painting.pri
+++ b/src/gui/painting/painting.pri
@@ -14,8 +14,6 @@ HEADERS += \
         painting/qpaintdevice.h \
         painting/qpaintengine.h \
         painting/qpaintengine_p.h \
-        painting/qpaintengine_alpha_p.h \
-        painting/qpaintengine_preview_p.h \
         painting/qpaintengineex_p.h \
         painting/qpainter.h \
         painting/qpainter_p.h \
@@ -28,11 +26,6 @@ HEADERS += \
         painting/qpen.h \
         painting/qpolygon.h \
         painting/qpolygonclipper_p.h \
-        painting/qprintengine.h \
-        painting/qprinter.h \
-        painting/qprinter_p.h \
-        painting/qprinterinfo.h \
-        painting/qprinterinfo_p.h \
         painting/qrasterizer_p.h \
         painting/qregion.h \
         painting/qstroker_p.h \
@@ -45,6 +38,7 @@ HEADERS += \
 
 SOURCES += \
         painting/qbackingstore.cpp \
+        painting/qcolormap_qpa.cpp \
         painting/qbezier.cpp \
         painting/qblendfunctions.cpp \
         painting/qbrush.cpp \
@@ -57,9 +51,8 @@ SOURCES += \
         painting/qmemrotate.cpp \
         painting/qoutlinemapper.cpp \
         painting/qpaintdevice.cpp \
+        painting/qpaintdevice_qpa.cpp \
         painting/qpaintengine.cpp \
-        painting/qpaintengine_alpha.cpp \
-        painting/qpaintengine_preview.cpp \
         painting/qpaintengineex.cpp \
         painting/qpainter.cpp \
         painting/qpainterpath.cpp \
@@ -68,9 +61,6 @@ SOURCES += \
         painting/qpdfwriter.cpp \
         painting/qpen.cpp \
         painting/qpolygon.cpp \
-        painting/qprintengine_pdf.cpp \
-        painting/qprinter.cpp \
-        painting/qprinterinfo.cpp \
         painting/qrasterizer.cpp \
         painting/qregion.cpp \
         painting/qstroker.cpp \
@@ -97,77 +87,7 @@ SOURCES += \
                 painting/qpaintengine_blitter_p.h       \
                 painting/qblittable_p.h                 \
 
-win32:!qpa {
-        HEADERS += painting/qprintengine_win_p.h
 
-        SOURCES += \
-                painting/qcolormap_win.cpp \
-                painting/qpaintdevice_win.cpp \
-                painting/qprintengine_win.cpp
-
-        !win32-borland:!wince*:LIBS += -lmsimg32
-}
-
-
-unix:x11 {
-        HEADERS += \
-                painting/qpaintengine_x11_p.h
-
-        SOURCES += \
-                painting/qcolormap_x11.cpp \
-                painting/qpaintdevice_x11.cpp \
-                painting/qpaintengine_x11.cpp
-}
-
-!qpa:!x11:mac {
-        HEADERS += \
-                painting/qpaintengine_mac_p.h \
-                painting/qprintengine_mac_p.h
-
-        SOURCES += \
-                painting/qcolormap_mac.cpp \
-                painting/qpaintdevice_mac.cpp \
-                painting/qpaintengine_mac.cpp \
-                painting/qprinterinfo_mac.cpp
-        OBJECTIVE_SOURCES += \
-                painting/qprintengine_mac.mm \
-}
-
-unix:!symbian {
-        HEADERS += \
-                painting/qprinterinfo_unix_p.h
-        SOURCES += \
-                painting/qprinterinfo_unix.cpp
-}
-
-qpa {
-        HEADERS += painting/qplatformprintersupport_qpa.h
-        SOURCES += \
-                painting/qcolormap_qpa.cpp \
-                painting/qpaintdevice_qpa.cpp \
-                painting/qplatformprintersupport_qpa.cpp
-}
-
-symbian {
-        SOURCES += \
-				painting/qpaintengine_s60.cpp \
-                painting/qregion_s60.cpp \
-                painting/qcolormap_s60.cpp
-
-        HEADERS += \
-                painting/qpaintengine_s60_p.h
-}
-
-x11|qpa:!win32 {
-        contains(QT_CONFIG,qtopia) {
-            DEFINES += QT_NO_CUPS QT_NO_LPR
-        } else {
-            SOURCES += painting/qcups.cpp
-            HEADERS += painting/qcups_p.h
-        }
-} else {
-        DEFINES += QT_NO_CUPS QT_NO_LPR
-}
 
 if(mmx|3dnow|sse|sse2|iwmmxt) {
     HEADERS += painting/qdrawhelper_x86_p.h \
diff --git a/src/gui/painting/qcups.cpp b/src/gui/painting/qcups.cpp
deleted file mode 100644
index 76050d9d71..0000000000
--- a/src/gui/painting/qcups.cpp
+++ /dev/null
@@ -1,446 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-#include <qdebug.h>
-#include "qcups_p.h"
-#include "qprinterinfo_unix_p.h"
-
-#ifndef QT_NO_CUPS
-
-#ifndef QT_LINUXBASE // LSB merges everything into cups.h
-# include <cups/language.h>
-#endif
-#include <qtextcodec.h>
-
-QT_BEGIN_NAMESPACE
-
-typedef int (*CupsGetDests)(cups_dest_t **dests);
-typedef void (*CupsFreeDests)(int num_dests, cups_dest_t *dests);
-typedef const char* (*CupsGetPPD)(const char *printer);
-typedef int (*CupsMarkOptions)(ppd_file_t *ppd, int num_options, cups_option_t *options);
-typedef ppd_file_t* (*PPDOpenFile)(const char *filename);
-typedef void (*PPDMarkDefaults)(ppd_file_t *ppd);
-typedef int (*PPDMarkOption)(ppd_file_t *ppd, const char *keyword, const char *option);
-typedef void (*PPDClose)(ppd_file_t *ppd);
-typedef int (*PPDMarkOption)(ppd_file_t *ppd, const char *keyword, const char *option);
-typedef void (*CupsFreeOptions)(int num_options, cups_option_t *options);
-typedef void (*CupsSetDests)(int num_dests, cups_dest_t *dests);
-typedef cups_lang_t* (*CupsLangGet)(const char *language);
-typedef const char* (*CupsLangEncoding)(cups_lang_t *language);
-typedef int (*CupsAddOption)(const char *name, const char *value, int num_options, cups_option_t **options);
-typedef int (*CupsTempFd)(char *name, int len);
-typedef int (*CupsPrintFile)(const char * name, const char * filename, const char * title, int num_options, cups_option_t * options);
-
-static bool cupsLoaded = false;
-static int qt_cups_num_printers = 0;
-static CupsGetDests _cupsGetDests = 0;
-static CupsFreeDests _cupsFreeDests = 0;
-static CupsGetPPD _cupsGetPPD = 0;
-static PPDOpenFile _ppdOpenFile = 0;
-static PPDMarkDefaults _ppdMarkDefaults = 0;
-static PPDClose _ppdClose = 0;
-static CupsMarkOptions _cupsMarkOptions = 0;
-static PPDMarkOption _ppdMarkOption = 0;
-static CupsFreeOptions _cupsFreeOptions = 0;
-static CupsSetDests _cupsSetDests = 0;
-static CupsLangGet _cupsLangGet = 0;
-static CupsLangEncoding _cupsLangEncoding = 0;
-static CupsAddOption _cupsAddOption = 0;
-static CupsTempFd _cupsTempFd = 0;
-static CupsPrintFile _cupsPrintFile = 0;
-
-static void resolveCups()
-{
-    QLibrary cupsLib(QLatin1String("cups"), 2);
-    if(cupsLib.load()) {
-        _cupsGetDests = (CupsGetDests) cupsLib.resolve("cupsGetDests");
-        _cupsFreeDests = (CupsFreeDests) cupsLib.resolve("cupsFreeDests");
-        _cupsGetPPD = (CupsGetPPD) cupsLib.resolve("cupsGetPPD");
-        _cupsLangGet = (CupsLangGet) cupsLib.resolve("cupsLangGet");
-        _cupsLangEncoding = (CupsLangEncoding) cupsLib.resolve("cupsLangEncoding");
-        _ppdOpenFile = (PPDOpenFile) cupsLib.resolve("ppdOpenFile");
-        _ppdMarkDefaults = (PPDMarkDefaults) cupsLib.resolve("ppdMarkDefaults");
-        _ppdClose = (PPDClose) cupsLib.resolve("ppdClose");
-        _cupsMarkOptions = (CupsMarkOptions) cupsLib.resolve("cupsMarkOptions");
-        _ppdMarkOption = (PPDMarkOption) cupsLib.resolve("ppdMarkOption");
-        _cupsFreeOptions = (CupsFreeOptions) cupsLib.resolve("cupsFreeOptions");
-        _cupsSetDests = (CupsSetDests) cupsLib.resolve("cupsSetDests");
-        _cupsAddOption = (CupsAddOption) cupsLib.resolve("cupsAddOption");
-        _cupsTempFd = (CupsTempFd) cupsLib.resolve("cupsTempFd");
-        _cupsPrintFile = (CupsPrintFile) cupsLib.resolve("cupsPrintFile");
-
-        if (_cupsGetDests && _cupsFreeDests) {
-            cups_dest_t *printers;
-            int num_printers = _cupsGetDests(&printers);
-            if (num_printers)
-                _cupsFreeDests(num_printers, printers);
-            qt_cups_num_printers = num_printers;
-        }
-    }
-    cupsLoaded = true;
-}
-
-// ================ CUPS Support class ========================
-
-QCUPSSupport::QCUPSSupport()
-    :
-    prnCount(0),
-    printers(0),
-    page_sizes(0),
-    currPrinterIndex(0),
-    currPPD(0)
-{
-    if (!cupsLoaded)
-        resolveCups();
-
-    // getting all available printers
-    if (!isAvailable())
-        return;
-
-    prnCount = _cupsGetDests(&printers);
-
-    for (int i = 0; i <  prnCount; ++i) {
-        if (printers[i].is_default) {
-            currPrinterIndex = i;
-            setCurrentPrinter(i);
-            break;
-        }
-    }
-
-#ifndef QT_NO_TEXTCODEC
-    cups_lang_t *cupsLang = _cupsLangGet(0);
-    codec = QTextCodec::codecForName(_cupsLangEncoding(cupsLang));
-    if (!codec)
-        codec = QTextCodec::codecForLocale();
-#endif
-}
-
-QCUPSSupport::~QCUPSSupport()
-{
-     if (currPPD)
-        _ppdClose(currPPD);
-     if (prnCount)
-         _cupsFreeDests(prnCount, printers);
-}
-
-int QCUPSSupport::availablePrintersCount() const
-{
-    return prnCount;
-}
-
-const cups_dest_t* QCUPSSupport::availablePrinters() const
-{
-    return printers;
-}
-
-const ppd_file_t* QCUPSSupport::currentPPD() const
-{
-    return currPPD;
-}
-
-const ppd_file_t* QCUPSSupport::setCurrentPrinter(int index)
-{
-    Q_ASSERT(index >= 0 && index <= prnCount);
-    if (index == prnCount)
-        return 0;
-
-    currPrinterIndex = index;
-
-    if (currPPD)
-        _ppdClose(currPPD);
-    currPPD = 0;
-    page_sizes = 0;
-
-    const char *ppdFile = _cupsGetPPD(printers[index].name);
-
-    if (!ppdFile)
-      return 0;
-
-    currPPD = _ppdOpenFile(ppdFile);
-    unlink(ppdFile);
-
-    // marking default options
-    _ppdMarkDefaults(currPPD);
-
-    // marking options explicitly set
-    _cupsMarkOptions(currPPD, printers[currPrinterIndex].num_options, printers[currPrinterIndex].options);
-
-    // getting pointer to page sizes
-    page_sizes = ppdOption("PageSize");
-
-    return currPPD;
-}
-
-int QCUPSSupport::currentPrinterIndex() const
-{
-    return currPrinterIndex;
-}
-
-bool QCUPSSupport::isAvailable()
-{
-    if(!cupsLoaded)
-        resolveCups();
-
-    return _cupsGetDests &&
-        _cupsFreeDests &&
-        _cupsGetPPD &&
-        _ppdOpenFile &&
-        _ppdMarkDefaults &&
-        _ppdClose &&
-        _cupsMarkOptions &&
-        _ppdMarkOption &&
-        _cupsFreeOptions &&
-        _cupsSetDests &&
-        _cupsLangGet &&
-        _cupsLangEncoding &&
-        _cupsAddOption &&
-        (qt_cups_num_printers > 0);
-}
-
-const ppd_option_t* QCUPSSupport::ppdOption(const char *key) const
-{
-    if (currPPD) {
-        for (int gr = 0; gr < currPPD->num_groups; ++gr) {
-            for (int opt = 0; opt < currPPD->groups[gr].num_options; ++opt) {
-                if (qstrcmp(currPPD->groups[gr].options[opt].keyword, key) == 0)
-                    return &currPPD->groups[gr].options[opt];
-            }
-        }
-    }
-    return 0;
-}
-
-const cups_option_t* QCUPSSupport::printerOption(const QString &key) const
-{
-    for (int i = 0; i < printers[currPrinterIndex].num_options; ++i) {
-        if (QLatin1String(printers[currPrinterIndex].options[i].name) == key)
-            return &printers[currPrinterIndex].options[i];
-    }
-    return 0;
-}
-
-const ppd_option_t* QCUPSSupport::pageSizes() const
-{
-    return page_sizes;
-}
-
-int QCUPSSupport::markOption(const char* name, const char* value)
-{
-    return _ppdMarkOption(currPPD, name, value);
-}
-
-void QCUPSSupport::saveOptions(QList<const ppd_option_t*> options, QList<const char*> markedOptions)
-{
-    int oldOptionCount = printers[currPrinterIndex].num_options;
-    cups_option_t* oldOptions = printers[currPrinterIndex].options;
-
-    int newOptionCount = 0;
-    cups_option_t* newOptions = 0;
-
-    // copying old options that are not on the new list
-    for (int i = 0; i < oldOptionCount; ++i) {
-        bool contains = false;
-        for (int j = 0; j < options.count(); ++j) {
-            if (qstrcmp(options.at(j)->keyword, oldOptions[i].name) == 0) {
-                contains = true;
-                break;
-            }
-        }
-
-        if (!contains) {
-            newOptionCount = _cupsAddOption(oldOptions[i].name, oldOptions[i].value, newOptionCount, &newOptions);
-        }
-    }
-
-    // we can release old option list
-     _cupsFreeOptions(oldOptionCount, oldOptions);
-
-    // adding marked options
-    for (int i = 0; i < markedOptions.count(); ++i) {
-        const char* name = markedOptions.at(i);
-        ++i;
-        newOptionCount = _cupsAddOption(name, markedOptions.at(i), newOptionCount, &newOptions);
-    }
-
-    // placing the new option list
-    printers[currPrinterIndex].num_options = newOptionCount;
-    printers[currPrinterIndex].options = newOptions;
-
-    // saving new default values
-    _cupsSetDests(prnCount, printers);
-}
-
-QRect QCUPSSupport::paperRect(const char *choice) const
-{
-    if (!currPPD)
-        return QRect();
-    for (int i = 0; i < currPPD->num_sizes; ++i) {
-        if (qstrcmp(currPPD->sizes[i].name, choice) == 0)
-            return QRect(0, 0, qRound(currPPD->sizes[i].width), qRound(currPPD->sizes[i].length));
-    }
-    return QRect();
-}
-
-QRect QCUPSSupport::pageRect(const char *choice) const
-{
-    if (!currPPD)
-        return QRect();
-    for (int i = 0; i < currPPD->num_sizes; ++i) {
-        if (qstrcmp(currPPD->sizes[i].name, choice) == 0)
-            return QRect(qRound(currPPD->sizes[i].left),
-                         qRound(currPPD->sizes[i].length - currPPD->sizes[i].top),
-                         qRound(currPPD->sizes[i].right - currPPD->sizes[i].left),
-                         qRound(currPPD->sizes[i].top - currPPD->sizes[i].bottom));
-    }
-    return QRect();
-}
-
-QStringList QCUPSSupport::options() const
-{
-    QStringList list;
-    collectMarkedOptions(list);
-    return list;
-}
-
-bool QCUPSSupport::printerHasPPD(const char *printerName)
-{
-    if (!isAvailable())
-        return false;
-    const char *ppdFile = _cupsGetPPD(printerName);
-    if (ppdFile)
-        unlink(ppdFile);
-    return (ppdFile != 0);
-}
-
-QString QCUPSSupport::unicodeString(const char *s)
-{
-#ifndef QT_NO_TEXTCODEC
-    return codec->toUnicode(s);
-#else
-    return QLatin1String(s);
-#endif
-}
-
-void QCUPSSupport::collectMarkedOptions(QStringList& list, const ppd_group_t* group) const
-{
-    if (group == 0) {
-        if (!currPPD)
-            return;
-        for (int i = 0; i < currPPD->num_groups; ++i) {
-            collectMarkedOptions(list, &currPPD->groups[i]);
-            collectMarkedOptionsHelper(list, &currPPD->groups[i]);
-        }
-    } else {
-        for (int i = 0; i < group->num_subgroups; ++i)
-            collectMarkedOptionsHelper(list, &group->subgroups[i]);
-    }
-}
-
-void QCUPSSupport::collectMarkedOptionsHelper(QStringList& list, const ppd_group_t* group) const
-{
-    for (int i = 0; i < group->num_options; ++i) {
-        for (int j = 0; j < group->options[i].num_choices; ++j) {
-            if (group->options[i].choices[j].marked == 1 && qstrcmp(group->options[i].choices[j].choice, group->options[i].defchoice) != 0)
-                list << QString::fromLocal8Bit(group->options[i].keyword) << QString::fromLocal8Bit(group->options[i].choices[j].choice);
-        }
-    }
-}
-
-QPair<int, QString> QCUPSSupport::tempFd()
-{
-    char filename[512];
-    int fd = _cupsTempFd(filename, 512);
-    return QPair<int, QString>(fd, QString::fromLocal8Bit(filename));
-}
-
-// Prints the given file and returns a job id.
-int QCUPSSupport::printFile(const char * printerName, const char * filename, const char * title,
-                            int num_options, cups_option_t * options)
-{
-    return _cupsPrintFile(printerName, filename, title, num_options, options);
-}
-
-QCUPSSupport::Printer::Printer(const QString &n) : name(n), isDefault(false), cupsPrinterIndex(-1)
-{
-}
-
-QList<QCUPSSupport::Printer> QCUPSSupport::availableUnixPrinters()
-{
-    QList<Printer> printers;
-
-#if !defined(QT_NO_CUPS) && !defined(QT_NO_LIBRARY)
-    if (QCUPSSupport::isAvailable()) {
-        QCUPSSupport cups;
-        int cupsPrinterCount = cups.availablePrintersCount();
-        const cups_dest_t* cupsPrinters = cups.availablePrinters();
-        for (int i = 0; i < cupsPrinterCount; ++i) {
-            QString printerName(QString::fromLocal8Bit(cupsPrinters[i].name));
-            if (cupsPrinters[i].instance)
-                printerName += QLatin1Char('/') + QString::fromLocal8Bit(cupsPrinters[i].instance);
-
-            Printer p(printerName);
-            if (cupsPrinters[i].is_default)
-                p.isDefault = true;
-            p.cupsPrinterIndex = i;
-            printers.append(p);
-        }
-    } else
-#endif
-           {
-        QList<QPrinterDescription> lprPrinters;
-        int defprn = qt_getLprPrinters(lprPrinters);
-        // populating printer combo
-        foreach (const QPrinterDescription &description, lprPrinters)
-            printers.append(Printer(description.name));
-        if (defprn >= 0 && defprn < printers.size())
-            printers[defprn].isDefault = true;
-    }
-
-    return printers;
-}
-
-QList<QPrinter::PaperSize> QCUPSSupport::getCupsPrinterPaperSizes(int cupsPrinterIndex)
-{
-    return qt_getCupsPrinterPaperSizes(cupsPrinterIndex);
-}
-
-QT_END_NAMESPACE
-
-#endif // QT_NO_CUPS
diff --git a/src/gui/painting/qcups_p.h b/src/gui/painting/qcups_p.h
deleted file mode 100644
index 6b6a55a440..0000000000
--- a/src/gui/painting/qcups_p.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#ifndef QCUPS_P_H
-#define QCUPS_P_H
-
-//
-//  W A R N I N G
-//  -------------
-//
-// This file is not part of the Qt API.  It exists purely as an
-// implementation detail.  This header file may change from version to
-// version without notice, or even be removed.
-//
-// We mean it.
-//
-#include "QtCore/qstring.h"
-#include "QtCore/qstringlist.h"
-#include "QtCore/qpair.h"
-#include "QtGui/qprinter.h"
-
-#ifndef QT_NO_CUPS
-#include <QtCore/qlibrary.h>
-#include <cups/cups.h>
-#include <cups/ppd.h>
-
-QT_BEGIN_NAMESPACE
-
-Q_DECLARE_TYPEINFO(cups_option_t, Q_MOVABLE_TYPE | Q_PRIMITIVE_TYPE);
-
-class Q_GUI_EXPORT QCUPSSupport
-{
-public:
-    struct Printer
-    {
-        Printer(const QString &name = QString());
-
-        QString name;
-        bool isDefault;
-        int cupsPrinterIndex;
-    };
-    QCUPSSupport();
-    ~QCUPSSupport();
-
-    static bool isAvailable();
-    static int cupsVersion() { return isAvailable() ? CUPS_VERSION_MAJOR*10000+CUPS_VERSION_MINOR*100+CUPS_VERSION_PATCH : 0; }
-    int availablePrintersCount() const;
-    const cups_dest_t* availablePrinters() const;
-    int currentPrinterIndex() const;
-    const ppd_file_t* setCurrentPrinter(int index);
-
-    const ppd_file_t* currentPPD() const;
-    const ppd_option_t* ppdOption(const char *key) const;
-
-    const cups_option_t* printerOption(const QString &key) const;
-    const ppd_option_t* pageSizes() const;
-
-    int markOption(const char* name, const char* value);
-    void saveOptions(QList<const ppd_option_t*> options, QList<const char*> markedOptions);
-
-    QRect paperRect(const char *choice) const;
-    QRect pageRect(const char *choice) const;
-
-    QStringList options() const;
-
-    static bool printerHasPPD(const char *printerName);
-
-    QString unicodeString(const char *s);
-
-    QPair<int, QString> tempFd();
-    int printFile(const char * printerName, const char * filename, const char * title,
-                  int num_options, cups_option_t * options);
-
-    static QList<Printer> availableUnixPrinters();
-    static QList<QPrinter::PaperSize> getCupsPrinterPaperSizes(int cupsPrinterIndex);
-
-private:
-    void collectMarkedOptions(QStringList& list, const ppd_group_t* group = 0) const;
-    void collectMarkedOptionsHelper(QStringList& list, const ppd_group_t* group) const;
-
-    int prnCount;
-    cups_dest_t *printers;
-    const ppd_option_t* page_sizes;
-    int currPrinterIndex;
-    ppd_file_t *currPPD;
-#ifndef QT_NO_TEXTCODEC
-    QTextCodec *codec;
-#endif
-};
-
-QT_END_NAMESPACE
-
-#endif // QT_NO_CUPS
-
-#endif
diff --git a/src/gui/painting/qpaintengine_alpha.cpp b/src/gui/painting/qpaintengine_alpha.cpp
deleted file mode 100644
index beda2c7144..0000000000
--- a/src/gui/painting/qpaintengine_alpha.cpp
+++ /dev/null
@@ -1,516 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include <qglobal.h>
-
-#ifndef QT_NO_PRINTER
-#include <qdebug.h>
-#include "private/qpaintengine_alpha_p.h"
-
-#include "private/qpicture_p.h"
-#include "private/qfont_p.h"
-#include "QtGui/qpicture.h"
-
-QT_BEGIN_NAMESPACE
-
-QAlphaPaintEngine::QAlphaPaintEngine(QAlphaPaintEnginePrivate &data, PaintEngineFeatures devcaps)
-    : QPaintEngine(data, devcaps)
-{
-
-}
-
-QAlphaPaintEngine::~QAlphaPaintEngine()
-{
-
-}
-
-bool QAlphaPaintEngine::begin(QPaintDevice *pdev)
-{
-    Q_D(QAlphaPaintEngine);
-
-    d->m_continueCall = true;
-    if (d->m_pass != 0) {
-        return true;
-    }
-
-    d->m_savedcaps = gccaps;
-    d->m_pdev = pdev;
-
-    d->m_alphaPen = false;
-    d->m_alphaBrush = false;
-    d->m_alphaOpacity = false;
-    d->m_hasalpha = false;
-    d->m_advancedPen = false;
-    d->m_advancedBrush = false;
-    d->m_complexTransform = false;
-    d->m_emulateProjectiveTransforms = false;
-
-    // clear alpha region
-    d->m_alphargn = QRegion();
-    d->m_cliprgn = QRegion();
-    d->m_pen = QPen();
-    d->m_transform = QTransform();
-
-    flushAndInit();
-
-    return true;
-}
-
-bool QAlphaPaintEngine::end()
-{
-    Q_D(QAlphaPaintEngine);
-
-    d->m_continueCall = true;
-    if (d->m_pass != 0) {
-        return true;
-    }
-
-    flushAndInit(false);
-    return true;
-}
-
-void QAlphaPaintEngine::updateState(const QPaintEngineState &state)
-{
-    Q_D(QAlphaPaintEngine);
-
-    DirtyFlags flags = state.state();
-    if (flags & QPaintEngine::DirtyTransform) {
-        d->m_transform = state.transform();
-        d->m_complexTransform = (d->m_transform.type() > QTransform::TxScale);
-        d->m_emulateProjectiveTransforms = !(d->m_savedcaps & QPaintEngine::PerspectiveTransform)
-                                           && !(d->m_savedcaps & QPaintEngine::AlphaBlend)
-                                           && (d->m_transform.type() >= QTransform::TxProject);
-    }
-    if (flags & QPaintEngine::DirtyPen) {
-        d->m_pen = state.pen();
-        if (d->m_pen.style() == Qt::NoPen) {
-            d->m_advancedPen = false;
-            d->m_alphaPen = false;
-        } else {
-            d->m_advancedPen = (d->m_pen.brush().style() != Qt::SolidPattern);
-            d->m_alphaPen = !d->m_pen.brush().isOpaque();
-        }
-    }
-
-    if (d->m_pass != 0) {
-        d->m_continueCall = true;
-        return;
-    }
-    d->m_continueCall = false;
-
-    if (flags & QPaintEngine::DirtyOpacity) {
-        d->m_alphaOpacity = (state.opacity() != 1.0f);
-    }
-
-    if (flags & QPaintEngine::DirtyBrush) {
-        if (state.brush().style() == Qt::NoBrush) {
-            d->m_advancedBrush = false;
-            d->m_alphaBrush = false;
-        } else {
-            d->m_advancedBrush = (state.brush().style() != Qt::SolidPattern);
-            d->m_alphaBrush = !state.brush().isOpaque();
-        }
-    }
-
-
-    d->m_hasalpha = d->m_alphaOpacity || d->m_alphaBrush || d->m_alphaPen;
-
-    if (d->m_picengine)
-        d->m_picengine->updateState(state);
-}
-
-void QAlphaPaintEngine::drawPath(const QPainterPath &path)
-{
-    Q_D(QAlphaPaintEngine);
-
-    QRectF tr = d->addPenWidth(path);
-
-    if (d->m_pass == 0) {
-        d->m_continueCall = false;
-        if (d->m_hasalpha || d->m_advancedPen || d->m_advancedBrush
-            || d->m_emulateProjectiveTransforms)
-        {
-            d->addAlphaRect(tr);
-        }
-        if (d->m_picengine)
-            d->m_picengine->drawPath(path);
-    } else {
-        d->m_continueCall = !d->fullyContained(tr);
-    }
-}
-
-void QAlphaPaintEngine::drawPolygon(const QPointF *points, int pointCount, PolygonDrawMode mode)
-{
-    Q_D(QAlphaPaintEngine);
-
-    QPolygonF poly;
-    for (int i=0; i<pointCount; ++i)
-        poly.append(points[i]);
-
-    QPainterPath path;
-    path.addPolygon(poly);
-    QRectF tr = d->addPenWidth(path);
-
-    if (d->m_pass == 0) {
-        d->m_continueCall = false;
-        if (d->m_hasalpha || d->m_advancedPen || d->m_advancedBrush
-            || d->m_emulateProjectiveTransforms)
-        {
-            d->addAlphaRect(tr);
-        }
-
-        if (d->m_picengine)
-            d->m_picengine->drawPolygon(points, pointCount, mode);
-    } else {
-        d->m_continueCall = !d->fullyContained(tr);
-    }
-}
-
-void QAlphaPaintEngine::drawPixmap(const QRectF &r, const QPixmap &pm, const QRectF &sr)
-{
-    Q_D(QAlphaPaintEngine);
-
-    QRectF tr = d->m_transform.mapRect(r);
-    if (d->m_pass == 0) {
-        d->m_continueCall = false;
-        if (pm.hasAlpha() || d->m_alphaOpacity || d->m_complexTransform || pm.isQBitmap()) {
-            d->addAlphaRect(tr);
-        }
-
-        if (d->m_picengine)
-            d->m_picengine->drawPixmap(r, pm, sr);
-
-    } else {
-        d->m_continueCall = !d->fullyContained(tr);
-    }
-}
-
-void QAlphaPaintEngine::drawImage(const QRectF &r, const QImage &image, const QRectF &sr)
-{
-    Q_D(QAlphaPaintEngine);
-
-    QRectF tr = d->m_transform.mapRect(r);
-    if (d->m_pass == 0) {
-        d->m_continueCall = false;
-        if (image.hasAlphaChannel() || d->m_alphaOpacity || d->m_complexTransform) {
-            d->addAlphaRect(tr);
-        }
-
-        if (d->m_picengine)
-            d->m_picengine->drawImage(r, image, sr);
-
-    } else {
-        d->m_continueCall = !d->fullyContained(tr);
-    }
-}
-
-void QAlphaPaintEngine::drawTextItem(const QPointF &p, const QTextItem &textItem)
-{
-    Q_D(QAlphaPaintEngine);
-
-    QRectF tr(p.x(), p.y() - textItem.ascent(), textItem.width() + 5, textItem.ascent() + textItem.descent() + 5);
-    tr = d->m_transform.mapRect(tr);
-
-    if (d->m_pass == 0) {
-        d->m_continueCall = false;
-        if (d->m_alphaPen || d->m_alphaOpacity || d->m_advancedPen) {
-            d->addAlphaRect(tr);
-        }
-        if (d->m_picengine) {
-            d->m_picengine->drawTextItem(p, textItem);
-        }
-    } else {
-        d->m_continueCall = !d->fullyContained(tr);
-    }
-}
-
-void QAlphaPaintEngine::drawTiledPixmap(const QRectF &r, const QPixmap &pixmap, const QPointF &s)
-{
-    Q_D(QAlphaPaintEngine);
-
-    QRectF brect = d->m_transform.mapRect(r);
-
-    if (d->m_pass == 0) {
-        d->m_continueCall = false;
-        if (pixmap.hasAlpha() || d->m_alphaOpacity || d->m_complexTransform || pixmap.isQBitmap()) {
-            d->addAlphaRect(brect);
-        }
-        if (d->m_picengine)
-            d->m_picengine->drawTiledPixmap(r, pixmap, s);
-    } else {
-        d->m_continueCall = !d->fullyContained(brect);
-    }
-}
-
-QRegion QAlphaPaintEngine::alphaClipping() const
-{
-    Q_D(const QAlphaPaintEngine);
-    return d->m_cliprgn;
-}
-
-bool QAlphaPaintEngine::continueCall() const
-{
-    Q_D(const QAlphaPaintEngine);
-    return d->m_continueCall;
-}
-
-void QAlphaPaintEngine::flushAndInit(bool init)
-{
-    Q_D(QAlphaPaintEngine);
-    Q_ASSERT(d->m_pass == 0);
-
-    if (d->m_pic) {
-        d->m_picpainter->end();
-
-        // set clip region
-        d->m_alphargn = d->m_alphargn.intersected(QRect(0, 0, d->m_pdev->width(), d->m_pdev->height()));
-
-        // just use the bounding rect if it's a complex region..
-        QVector<QRect> rects = d->m_alphargn.rects();
-        if (rects.size() > 10) {
-            QRect br = d->m_alphargn.boundingRect();
-            d->m_alphargn = QRegion(br);
-            rects.clear();
-            rects.append(br);
-        }
-
-        d->m_cliprgn = d->m_alphargn;
-
-        // now replay the QPicture
-        ++d->m_pass; // we are now doing pass #2
-
-        // reset states
-        gccaps = d->m_savedcaps;
-
-        painter()->save();
-        d->resetState(painter());
-
-        // make sure the output from QPicture is unscaled
-        QTransform mtx;
-        mtx.scale(1.0f / (qreal(d->m_pdev->logicalDpiX()) / qreal(qt_defaultDpiX())),
-                  1.0f / (qreal(d->m_pdev->logicalDpiY()) / qreal(qt_defaultDpiY())));
-        painter()->setTransform(mtx);
-        painter()->drawPicture(0, 0, *d->m_pic);
-
-        d->m_cliprgn = QRegion();
-        d->resetState(painter());
-
-        // fill in the alpha images
-        for (int i=0; i<rects.size(); ++i)
-            d->drawAlphaImage(rects.at(i));
-
-        d->m_alphargn = QRegion();
-
-        painter()->restore();
-
-        --d->m_pass; // pass #2 finished
-
-        cleanUp();
-    }
-
-    if (init) {
-        gccaps = PaintEngineFeatures(AllFeatures & ~QPaintEngine::ObjectBoundingModeGradients);
-
-        d->m_pic = new QPicture();
-        d->m_pic->d_ptr->in_memory_only = true;
-        d->m_picpainter = new QPainter(d->m_pic);
-        d->m_picengine = d->m_picpainter->paintEngine();
-
-        // When newPage() is called and the m_picpainter is recreated
-        // we have to copy the current state of the original printer
-        // painter back to the m_picpainter
-        d->m_picpainter->setPen(painter()->pen());
-        d->m_picpainter->setBrush(painter()->brush());
-        d->m_picpainter->setBrushOrigin(painter()->brushOrigin());
-        d->m_picpainter->setFont(painter()->font());
-        d->m_picpainter->setOpacity(painter()->opacity());
-        d->m_picpainter->setTransform(painter()->combinedTransform());
-        d->m_picengine->syncState();
-    }
-}
-
-void QAlphaPaintEngine::cleanUp()
-{
-    Q_D(QAlphaPaintEngine);
-
-    delete d->m_picpainter;
-    delete d->m_pic;
-
-    d->m_picpainter = 0;
-    d->m_pic = 0;
-    d->m_picengine = 0;
-}
-
-QAlphaPaintEnginePrivate::QAlphaPaintEnginePrivate()
-    :   m_pass(0),
-        m_pic(0),
-        m_picengine(0),
-        m_picpainter(0),
-        m_hasalpha(false),
-        m_alphaPen(false),
-        m_alphaBrush(false),
-        m_alphaOpacity(false),
-        m_advancedPen(false),
-        m_advancedBrush(false),
-        m_complexTransform(false)
-{
-
-}
-
-QAlphaPaintEnginePrivate::~QAlphaPaintEnginePrivate()
-{
-    delete m_picpainter;
-    delete m_pic;
-}
-
-QRectF QAlphaPaintEnginePrivate::addPenWidth(const QPainterPath &path)
-{
-    QPainterPath tmp = path;
-
-    if (m_pen.style() == Qt::NoPen)
-        return (path.controlPointRect() * m_transform).boundingRect();
-    if (m_pen.isCosmetic())
-        tmp = path * m_transform;
-
-    QPainterPathStroker stroker;
-    if (m_pen.widthF() == 0.0f)
-        stroker.setWidth(1.0);
-    else
-        stroker.setWidth(m_pen.widthF());
-    stroker.setJoinStyle(m_pen.joinStyle());
-    stroker.setCapStyle(m_pen.capStyle());
-    tmp = stroker.createStroke(tmp);
-    if (m_pen.isCosmetic())
-        return tmp.controlPointRect();
-
-    return (tmp.controlPointRect() * m_transform).boundingRect();
-}
-
-QRect QAlphaPaintEnginePrivate::toRect(const QRectF &rect) const
-{
-    QRect r;
-    r.setLeft(int(rect.left()));
-    r.setTop(int(rect.top()));
-    r.setRight(int(rect.right() + 1));
-    r.setBottom(int(rect.bottom() + 1));
-    return r;
-}
-
-void QAlphaPaintEnginePrivate::addAlphaRect(const QRectF &rect)
-{
-    m_alphargn |= toRect(rect);
-}
-
-void QAlphaPaintEnginePrivate::drawAlphaImage(const QRectF &rect)
-{
-    Q_Q(QAlphaPaintEngine);
-
-    qreal dpiX = qMax(m_pdev->logicalDpiX(), 300);
-    qreal dpiY = qMax(m_pdev->logicalDpiY(), 300);
-    qreal xscale = (dpiX / m_pdev->logicalDpiX());
-    qreal yscale = (dpiY / m_pdev->logicalDpiY());
-
-    QTransform picscale;
-    picscale.scale(xscale, yscale);
-
-    const int tileSize = 2048;
-    QSize size((int(rect.width() * xscale)), int(rect.height() * yscale));
-    int divw = (size.width() / tileSize);
-    int divh = (size.height() / tileSize);
-    divw += 1;
-    divh += 1;
-
-    int incx = int(rect.width() / divw);
-    int incy = int(rect.height() / divh);
-
-    for (int y=0; y<divh; ++y) {
-        int ypos = int((incy * y) + rect.y());
-        int height = int((y == (divh - 1)) ? (rect.height() - (incy * y)) : incy) + 1;
-
-        for (int x=0; x<divw; ++x) {
-            int xpos = int((incx * x) + rect.x());
-            int width = int((x == (divw - 1)) ? (rect.width() - (incx * x)) : incx) + 1;
-
-            QSize imgsize((int)(width * xscale), (int)(height * yscale));
-            QImage img(imgsize, QImage::Format_RGB32);
-            img.fill(0xffffffff);
-
-            QPainter imgpainter(&img);
-            imgpainter.setTransform(picscale);
-            QPointF picpos(qreal(-xpos), qreal(-ypos));
-            imgpainter.drawPicture(picpos, *m_pic);
-            imgpainter.end();
-
-            q->painter()->setTransform(QTransform());
-            QRect r(xpos, ypos, width, height);
-            q->painter()->drawImage(r, img);
-        }
-    }
-}
-
-bool QAlphaPaintEnginePrivate::fullyContained(const QRectF &rect) const
-{
-    QRegion r(toRect(rect));
-    return (m_cliprgn.intersected(r) == r);
-}
-
-void QAlphaPaintEnginePrivate::resetState(QPainter *p)
-{
-    p->setPen(QPen());
-    p->setBrush(QBrush());
-    p->setBrushOrigin(0,0);
-    p->setBackground(QBrush());
-    p->setFont(QFont());
-    p->setTransform(QTransform());
-    // The view transform is already recorded and included in the
-    // picture we're about to replay. If we don't turn if off,
-    // the view matrix will be applied twice.
-    p->setViewTransformEnabled(false);
-    p->setClipRegion(QRegion(), Qt::NoClip);
-    p->setClipPath(QPainterPath(), Qt::NoClip);
-    p->setClipping(false);
-    p->setOpacity(1.0f);
-}
-
-
-QT_END_NAMESPACE
-
-#endif // QT_NO_PRINTER
diff --git a/src/gui/painting/qpaintengine_alpha_p.h b/src/gui/painting/qpaintengine_alpha_p.h
deleted file mode 100644
index 5694e2a5bc..0000000000
--- a/src/gui/painting/qpaintengine_alpha_p.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#ifndef QPAINTENGINE_ALPHA_P_H
-#define QPAINTENGINE_ALPHA_P_H
-
-//
-//  W A R N I N G
-//  -------------
-//
-// This file is not part of the Qt API.  It exists for the convenience
-// of other Qt classes.  This header file may change from version to
-// version without notice, or even be removed.
-//
-// We mean it.
-//
-
-#ifndef QT_NO_PRINTER
-#include "private/qpaintengine_p.h"
-
-QT_BEGIN_NAMESPACE
-
-class QAlphaPaintEnginePrivate;
-
-class QAlphaPaintEngine : public QPaintEngine
-{
-    Q_DECLARE_PRIVATE(QAlphaPaintEngine)
-public:
-    ~QAlphaPaintEngine();
-
-    virtual bool begin(QPaintDevice *pdev);
-    virtual bool end();
-
-    virtual void updateState(const QPaintEngineState &state);
-
-    virtual void drawPath(const QPainterPath &path);
-
-    virtual void drawPolygon(const QPointF *points, int pointCount, PolygonDrawMode mode);
-
-    virtual void drawPixmap(const QRectF &r, const QPixmap &pm, const QRectF &sr);
-    virtual void drawImage(const QRectF &r, const QImage &image, const QRectF &sr);
-    virtual void drawTextItem(const QPointF &p, const QTextItem &textItem);
-    virtual void drawTiledPixmap(const QRectF &r, const QPixmap &pixmap, const QPointF &s);
-
-protected:
-    QAlphaPaintEngine(QAlphaPaintEnginePrivate &data, PaintEngineFeatures devcaps = 0);
-    QRegion alphaClipping() const;
-    bool continueCall() const;
-    void flushAndInit(bool init = true);
-    void cleanUp();
-};
-
-class QAlphaPaintEnginePrivate : public QPaintEnginePrivate
-{
-    Q_DECLARE_PUBLIC(QAlphaPaintEngine)
-public:
-    QAlphaPaintEnginePrivate();
-    ~QAlphaPaintEnginePrivate();
-
-    int m_pass;
-    QPicture *m_pic;
-    QPaintEngine *m_picengine;
-    QPainter *m_picpainter;
-
-    QPaintEngine::PaintEngineFeatures m_savedcaps;
-    QPaintDevice *m_pdev;
-
-    QRegion m_alphargn;
-    QRegion m_cliprgn;
-
-    bool m_hasalpha;
-    bool m_alphaPen;
-    bool m_alphaBrush;
-    bool m_alphaOpacity;
-    bool m_advancedPen;
-    bool m_advancedBrush;
-    bool m_complexTransform;
-    bool m_emulateProjectiveTransforms;
-    bool m_continueCall;
-
-    QTransform m_transform;
-    QPen m_pen;
-
-    void addAlphaRect(const QRectF &rect);
-    QRectF addPenWidth(const QPainterPath &path);
-    void drawAlphaImage(const QRectF &rect);
-    QRect toRect(const QRectF &rect) const;
-    bool fullyContained(const QRectF &rect) const;
-
-    void resetState(QPainter *p);
-};
-
-QT_END_NAMESPACE
-
-#endif // QT_NO_PRINTER
-
-#endif // QPAINTENGINE_ALPHA_P_H
diff --git a/src/gui/painting/qpaintengine_preview.cpp b/src/gui/painting/qpaintengine_preview.cpp
deleted file mode 100644
index d3b7756516..0000000000
--- a/src/gui/painting/qpaintengine_preview.cpp
+++ /dev/null
@@ -1,223 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include <private/qpaintengine_preview_p.h>
-#include <private/qpainter_p.h>
-#include <private/qpaintengine_p.h>
-#include <private/qpicture_p.h>
-
-#include <QtGui/qprintengine.h>
-#include <QtGui/qpainter.h>
-#include <QtGui/qpicture.h>
-
-#ifndef QT_NO_PRINTPREVIEWWIDGET
-QT_BEGIN_NAMESPACE
-
-class QPreviewPaintEnginePrivate : public QPaintEnginePrivate
-{
-    Q_DECLARE_PUBLIC(QPreviewPaintEngine)
-public:
-    QPreviewPaintEnginePrivate() : state(QPrinter::Idle) {}
-    ~QPreviewPaintEnginePrivate() {}
-
-    QList<const QPicture *> pages;
-    QPaintEngine *engine;
-    QPainter *painter;
-    QPrinter::PrinterState state;
-
-    QPaintEngine *proxy_paint_engine;
-    QPrintEngine *proxy_print_engine;
-};
-
-
-QPreviewPaintEngine::QPreviewPaintEngine()
-    : QPaintEngine(*(new QPreviewPaintEnginePrivate), PaintEngineFeatures(AllFeatures & ~ObjectBoundingModeGradients))
-{
-    Q_D(QPreviewPaintEngine);
-    d->proxy_print_engine = 0;
-    d->proxy_paint_engine = 0;
-}
-
-QPreviewPaintEngine::~QPreviewPaintEngine()
-{
-    Q_D(QPreviewPaintEngine);
-
-    qDeleteAll(d->pages);
-}
-
-bool QPreviewPaintEngine::begin(QPaintDevice *)
-{
-    Q_D(QPreviewPaintEngine);
-
-    qDeleteAll(d->pages);
-    d->pages.clear();
-
-    QPicture *page = new QPicture;
-    page->d_func()->in_memory_only = true;
-    d->painter = new QPainter(page);
-    d->engine = d->painter->paintEngine();
-    d->pages.append(page);
-    d->state = QPrinter::Active;
-    return true;
-}
-
-bool QPreviewPaintEngine::end()
-{
-    Q_D(QPreviewPaintEngine);
-
-    delete d->painter;
-    d->painter = 0;
-    d->engine = 0;
-    d->state = QPrinter::Idle;
-    return true;
-}
-
-void QPreviewPaintEngine::updateState(const QPaintEngineState &state)
-{
-    Q_D(QPreviewPaintEngine);
-    d->engine->updateState(state);
-}
-
-void QPreviewPaintEngine::drawPath(const QPainterPath &path)
-{
-    Q_D(QPreviewPaintEngine);
-    d->engine->drawPath(path);
-}
-
-void QPreviewPaintEngine::drawPolygon(const QPointF *points, int pointCount, PolygonDrawMode mode)
-{
-    Q_D(QPreviewPaintEngine);
-    d->engine->drawPolygon(points, pointCount, mode);
-}
-
-void QPreviewPaintEngine::drawTextItem(const QPointF &p, const QTextItem &textItem)
-{
-    Q_D(QPreviewPaintEngine);
-    d->engine->drawTextItem(p, textItem);
-}
-
-void QPreviewPaintEngine::drawPixmap(const QRectF &r, const QPixmap &pm, const QRectF &sr)
-{
-    Q_D(QPreviewPaintEngine);
-    d->engine->drawPixmap(r, pm, sr);
-}
-
-void QPreviewPaintEngine::drawTiledPixmap(const QRectF &r, const QPixmap &pm, const QPointF &p)
-{
-    Q_D(QPreviewPaintEngine);
-    d->engine->drawTiledPixmap(r, pm, p);
-}
-
-bool QPreviewPaintEngine::newPage()
-{
-    Q_D(QPreviewPaintEngine);
-
-    QPicture *page = new QPicture;
-    page->d_func()->in_memory_only = true;
-    QPainter *tmp_painter = new QPainter(page);
-    QPaintEngine *tmp_engine = tmp_painter->paintEngine();
-
-    // copy the painter state from the original painter
-    Q_ASSERT(painter()->d_func()->state && tmp_painter->d_func()->state);
-    *tmp_painter->d_func()->state = *painter()->d_func()->state;
-
-    // composition modes aren't supported on a QPrinter and yields a
-    // warning, so ignore it for now
-    tmp_engine->setDirty(DirtyFlags(AllDirty & ~DirtyCompositionMode));
-    tmp_engine->syncState();
-
-    delete d->painter;
-    d->painter = tmp_painter;
-    d->pages.append(page);
-    d->engine = tmp_engine;
-    return true;
-}
-
-bool QPreviewPaintEngine::abort()
-{
-    Q_D(QPreviewPaintEngine);
-    end();
-    qDeleteAll(d->pages);
-    d->state = QPrinter::Aborted;
-
-    return true;
-}
-
-QList<const QPicture *> QPreviewPaintEngine::pages()
-{
-    Q_D(QPreviewPaintEngine);
-    return d->pages;
-}
-
-void QPreviewPaintEngine::setProxyEngines(QPrintEngine *printEngine, QPaintEngine *paintEngine)
-{
-    Q_D(QPreviewPaintEngine);
-    d->proxy_print_engine = printEngine;
-    d->proxy_paint_engine = paintEngine;
-}
-
-void QPreviewPaintEngine::setProperty(PrintEnginePropertyKey key, const QVariant &value)
-{
-    Q_D(QPreviewPaintEngine);
-    d->proxy_print_engine->setProperty(key, value);
-}
-
-QVariant QPreviewPaintEngine::property(PrintEnginePropertyKey key) const
-{
-    Q_D(const QPreviewPaintEngine);
-    return d->proxy_print_engine->property(key);
-}
-
-int QPreviewPaintEngine::metric(QPaintDevice::PaintDeviceMetric id) const
-{
-    Q_D(const QPreviewPaintEngine);
-    return d->proxy_print_engine->metric(id);
-}
-
-QPrinter::PrinterState QPreviewPaintEngine::printerState() const
-{
-    Q_D(const QPreviewPaintEngine);
-    return d->state;
-}
-
-QT_END_NAMESPACE
-
-#endif
diff --git a/src/gui/painting/qpaintengine_preview_p.h b/src/gui/painting/qpaintengine_preview_p.h
deleted file mode 100644
index 902a03bd8f..0000000000
--- a/src/gui/painting/qpaintengine_preview_p.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#ifndef QPREVIEWPAINTENGINE_P_H
-#define QPREVIEWPAINTENGINE_P_H
-
-//
-//  W A R N I N G
-//  -------------
-//
-// This file is not part of the Qt API.  It exists for the convenience
-// of QPreviewPrinter and friends.  This header file may change from
-// version to version without notice, or even be removed.
-//
-// We mean it.
-//
-//
-
-#include <QtGui/qpaintengine.h>
-#include <QtGui/qprintengine.h>
-
-#ifndef QT_NO_PRINTPREVIEWWIDGET
-
-QT_BEGIN_NAMESPACE
-
-class QPreviewPaintEnginePrivate;
-
-class QPreviewPaintEngine : public QPaintEngine, public QPrintEngine
-{
-    Q_DECLARE_PRIVATE(QPreviewPaintEngine)
-public:
-    QPreviewPaintEngine();
-    ~QPreviewPaintEngine();
-
-    bool begin(QPaintDevice *dev);
-    bool end();
-
-    void updateState(const QPaintEngineState &state);
-
-    void drawPath(const QPainterPath &path);
-    void drawPolygon(const QPointF *points, int pointCount, PolygonDrawMode mode);
-    void drawTextItem(const QPointF &p, const QTextItem &textItem);
-
-    void drawPixmap(const QRectF &r, const QPixmap &pm, const QRectF &sr);
-    void drawTiledPixmap(const QRectF &r, const QPixmap &pm, const QPointF &p);
-
-    QList<const QPicture *> pages();
-
-    QPaintEngine::Type type() const { return Picture; }
-
-    void setProxyEngines(QPrintEngine *printEngine, QPaintEngine *paintEngine);
-
-    void setProperty(PrintEnginePropertyKey key, const QVariant &value);
-    QVariant property(PrintEnginePropertyKey key) const;
-
-    bool newPage();
-    bool abort();
-
-    int metric(QPaintDevice::PaintDeviceMetric) const;
-
-    QPrinter::PrinterState printerState() const;
-};
-
-QT_END_NAMESPACE
-
-#endif // QT_NO_PRINTPREVIEWWIDGET
-
-#endif
diff --git a/src/gui/painting/qplatformprintersupport_qpa.cpp b/src/gui/painting/qplatformprintersupport_qpa.cpp
deleted file mode 100644
index 9fb25c953f..0000000000
--- a/src/gui/painting/qplatformprintersupport_qpa.cpp
+++ /dev/null
@@ -1,133 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include "qplatformprintersupport_qpa.h"
-
-#include <QtGui/qprinterinfo.h>
-
-#include <private/qprinterinfo_p.h>
-
-#ifndef QT_NO_PRINTER
-
-QT_BEGIN_NAMESPACE
-
-QPlatformPrinterSupport::QPlatformPrinterSupport()
-{
-}
-
-QPlatformPrinterSupport::~QPlatformPrinterSupport()
-{
-}
-
-QPrintEngine *QPlatformPrinterSupport::createNativePrintEngine(QPrinter::PrinterMode)
-{
-    return 0;
-}
-
-QPaintEngine *QPlatformPrinterSupport::createPaintEngine(QPrintEngine *, QPrinter::PrinterMode)
-{
-    return 0;
-}
-
-QList<QPrinter::PaperSize> QPlatformPrinterSupport::supportedPaperSizes(const QPrinterInfo &) const
-{
-    return QList<QPrinter::PaperSize>();
-}
-
-QList<QPrinterInfo> QPlatformPrinterSupport::availablePrinters()
-{
-    return QList<QPrinterInfo>();
-}
-
-QPrinterInfo QPlatformPrinterSupport::defaultPrinter()
-{
-    const QList<QPrinterInfo> printers = availablePrinters();
-    foreach (const QPrinterInfo &printerInfo, printers) {
-        if (printerInfo.isDefault())
-            return printerInfo;
-    }
-    return printers.isEmpty() ? QPrinterInfo() : printers.front();
-}
-
-QPrinterInfo QPlatformPrinterSupport::printerInfo(const QString &printerName, bool isDefault)
-{
-    QPrinterInfo pi = QPrinterInfo(printerName);
-    pi.d_func()->isDefault = isDefault;
-    return pi;
-}
-
-void QPlatformPrinterSupport::setPrinterInfoDefault(QPrinterInfo *p, bool isDefault)
-{
-    p->d_func()->isDefault = isDefault;
-}
-
-bool QPlatformPrinterSupport::printerInfoIsDefault(const QPrinterInfo &p)
-{
-    return p.d_func()->isDefault;
-}
-
-int QPlatformPrinterSupport::printerInfoCupsPrinterIndex(const QPrinterInfo &p)
-{
-    int i = -1;
-#if (defined(Q_OS_UNIX) && !defined(Q_OS_MAC) && !defined(Q_OS_SYMBIAN)) || defined(Q_WS_QPA)
-#if !defined(QT_NO_CUPS) && !defined(QT_NO_LIBRARY)
-    if (!p.isNull())
-        return i = p.d_func()->cupsPrinterIndex;
-#endif
-#endif
-    Q_UNUSED(p)
-    return i;
-}
-
-void QPlatformPrinterSupport::setPrinterInfoCupsPrinterIndex(QPrinterInfo *p, int index)
-{
-#if (defined(Q_OS_UNIX) && !defined(Q_OS_MAC) && !defined(Q_OS_SYMBIAN)) || defined(Q_WS_QPA)
-#if !defined(QT_NO_CUPS) && !defined(QT_NO_LIBRARY)
-    p->d_func()->cupsPrinterIndex = index;
-#endif
-#endif
-    Q_UNUSED(p)
-    Q_UNUSED(index)
-}
-
-QT_END_NAMESPACE
-
-#endif // QT_NO_PRINTER
diff --git a/src/gui/painting/qplatformprintersupport_qpa.h b/src/gui/painting/qplatformprintersupport_qpa.h
deleted file mode 100644
index 90dd260925..0000000000
--- a/src/gui/painting/qplatformprintersupport_qpa.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#ifndef QPLATFORMPRINTINGSUPPORT_H
-#define QPLATFORMPRINTINGSUPPORT_H
-
-#include <QtGui/qprinter.h>
-
-QT_BEGIN_HEADER
-
-QT_BEGIN_NAMESPACE
-
-QT_MODULE(Gui)
-
-#ifndef QT_NO_PRINTER
-
-class QPrintEngine;
-
-class Q_GUI_EXPORT QPlatformPrinterSupport
-{
-public:
-    QPlatformPrinterSupport();
-    virtual ~QPlatformPrinterSupport();
-
-    virtual QPrintEngine *createNativePrintEngine(QPrinter::PrinterMode printerMode);
-    virtual QPaintEngine *createPaintEngine(QPrintEngine *, QPrinter::PrinterMode printerMode);
-    virtual QList<QPrinter::PaperSize> supportedPaperSizes(const QPrinterInfo &) const;
-
-    virtual QList<QPrinterInfo> availablePrinters();
-    virtual QPrinterInfo defaultPrinter();
-
-protected:
-     static QPrinterInfo printerInfo(const QString &printerName, bool isDefault = false);
-     static void setPrinterInfoDefault(QPrinterInfo *p, bool isDefault);
-     static bool printerInfoIsDefault(const QPrinterInfo &p);
-     static int printerInfoCupsPrinterIndex(const QPrinterInfo &p);
-     static void setPrinterInfoCupsPrinterIndex(QPrinterInfo *p, int index);
-};
-
-#endif // QT_NO_PRINTER
-
-QT_END_NAMESPACE
-
-QT_END_HEADER
-
-#endif // QPLATFORMPRINTINGSUPPORT_H
diff --git a/src/gui/painting/qprintengine.h b/src/gui/painting/qprintengine.h
deleted file mode 100644
index da4fe2ac68..0000000000
--- a/src/gui/painting/qprintengine.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#ifndef QPRINTENGINE_H
-#define QPRINTENGINE_H
-
-#include <QtCore/qvariant.h>
-#include <QtGui/qprinter.h>
-
-QT_BEGIN_HEADER
-
-QT_BEGIN_NAMESPACE
-
-QT_MODULE(Gui)
-
-#ifndef QT_NO_PRINTER
-
-class Q_GUI_EXPORT QPrintEngine
-{
-public:
-    virtual ~QPrintEngine() {}
-    enum PrintEnginePropertyKey {
-        PPK_CollateCopies,
-        PPK_ColorMode,
-        PPK_Creator,
-        PPK_DocumentName,
-        PPK_FullPage,
-        PPK_NumberOfCopies,
-        PPK_Orientation,
-        PPK_OutputFileName,
-        PPK_PageOrder,
-        PPK_PageRect,
-        PPK_PageSize,
-        PPK_PaperRect,
-        PPK_PaperSource,
-        PPK_PrinterName,
-        PPK_PrinterProgram,
-        PPK_Resolution,
-        PPK_SelectionOption,
-        PPK_SupportedResolutions,
-
-        PPK_WindowsPageSize,
-        PPK_FontEmbedding,
-        PPK_SuppressSystemPrintStatus,
-
-        PPK_Duplex,
-
-        PPK_PaperSources,
-        PPK_CustomPaperSize,
-        PPK_PageMargins,
-        PPK_CopyCount,
-        PPK_SupportsMultipleCopies,
-        PPK_PaperSize = PPK_PageSize,
-
-        PPK_CustomBase = 0xff00
-    };
-
-    virtual void setProperty(PrintEnginePropertyKey key, const QVariant &value) = 0;
-    virtual QVariant property(PrintEnginePropertyKey key) const = 0;
-
-    virtual bool newPage() = 0;
-    virtual bool abort() = 0;
-
-    virtual int metric(QPaintDevice::PaintDeviceMetric) const = 0;
-
-    virtual QPrinter::PrinterState printerState() const = 0;
-
-#ifdef Q_WS_WIN
-    virtual HDC getPrinterDC() const { return 0; }
-    virtual void releasePrinterDC(HDC) const { }
-#endif
-
-};
-
-#endif // QT_NO_PRINTER
-
-QT_END_NAMESPACE
-
-QT_END_HEADER
-
-#endif // QPRINTENGINE_H
diff --git a/src/gui/painting/qprintengine_pdf.cpp b/src/gui/painting/qprintengine_pdf.cpp
deleted file mode 100644
index df9a939e4b..0000000000
--- a/src/gui/painting/qprintengine_pdf.cpp
+++ /dev/null
@@ -1,648 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include <QtGui/qprintengine.h>
-
-#include <qiodevice.h>
-#include <qfile.h>
-#include <qdebug.h>
-#include <qbuffer.h>
-#include "private/qcups_p.h"
-#include "qprinterinfo.h"
-
-#ifndef QT_NO_PRINTER
-#include <limits.h>
-#include <math.h>
-
-#include "qprintengine_pdf_p.h"
-
-#ifdef Q_OS_UNIX
-#include "private/qcore_unix_p.h" // overrides QT_OPEN
-#endif
-
-QT_BEGIN_NAMESPACE
-
-//#define FONT_DUMP
-
-extern QSizeF qt_paperSizeToQSizeF(QPrinter::PaperSize size);
-
-#define Q_MM(n) int((n * 720 + 127) / 254)
-#define Q_IN(n) int(n * 72)
-
-static const char * const psToStr[QPrinter::NPaperSize+1] =
-{
-    "A4", "B5", "Letter", "Legal", "Executive",
-    "A0", "A1", "A2", "A3", "A5", "A6", "A7", "A8", "A9", "B0", "B1",
-    "B10", "B2", "B3", "B4", "B6", "B7", "B8", "B9", "C5E", "Comm10E",
-    "DLE", "Folio", "Ledger", "Tabloid", 0
-};
-
-QPdf::PaperSize QPdf::paperSize(QPrinter::PaperSize paperSize)
-{
-    QSizeF s = qt_paperSizeToQSizeF(paperSize);
-    PaperSize p = { Q_MM(s.width()), Q_MM(s.height()) };
-    return p;
-}
-
-const char *QPdf::paperSizeToString(QPrinter::PaperSize paperSize)
-{
-    return psToStr[paperSize];
-}
-
-
-QPdfPrintEngine::QPdfPrintEngine(QPrinter::PrinterMode m)
-    : QPdfEngine(*new QPdfPrintEnginePrivate(m))
-{
-    Q_D(QPdfPrintEngine);
-#if !defined(QT_NO_CUPS) && !defined(QT_NO_LIBRARY)
-    if (QCUPSSupport::isAvailable()) {
-        QCUPSSupport cups;
-        const cups_dest_t* printers = cups.availablePrinters();
-        int prnCount = cups.availablePrintersCount();
-
-        for (int i = 0; i <  prnCount; ++i) {
-            if (printers[i].is_default) {
-                d->printerName = QString::fromLocal8Bit(printers[i].name);
-                break;
-            }
-        }
-
-    } else
-#endif
-    {
-        d->printerName = QString::fromLocal8Bit(qgetenv("PRINTER"));
-        if (d->printerName.isEmpty())
-            d->printerName = QString::fromLocal8Bit(qgetenv("LPDEST"));
-        if (d->printerName.isEmpty())
-            d->printerName = QString::fromLocal8Bit(qgetenv("NPRINTER"));
-        if (d->printerName.isEmpty())
-            d->printerName = QString::fromLocal8Bit(qgetenv("NGPRINTER"));
-    }
-
-    state = QPrinter::Idle;
-}
-
-QPdfPrintEngine::~QPdfPrintEngine()
-{
-}
-
-bool QPdfPrintEngine::begin(QPaintDevice *pdev)
-{
-    Q_D(QPdfPrintEngine);
-
-    if (!d->openPrintDevice()) {
-        state = QPrinter::Error;
-        return false;
-    }
-    state = QPrinter::Active;
-
-    return QPdfEngine::begin(pdev);
-}
-
-bool QPdfPrintEngine::end()
-{
-    Q_D(QPdfPrintEngine);
-
-    QPdfEngine::end();
-
-    d->closePrintDevice();
-    state = QPrinter::Idle;
-
-    return true;
-}
-
-bool QPdfPrintEngine::newPage()
-{
-    return QPdfEngine::newPage();
-}
-
-int QPdfPrintEngine::metric(QPaintDevice::PaintDeviceMetric m) const
-{
-    return QPdfEngine::metric(m);
-}
-
-void QPdfPrintEngine::setProperty(PrintEnginePropertyKey key, const QVariant &value)
-{
-    Q_D(QPdfPrintEngine);
-
-    switch (int(key)) {
-    case PPK_CollateCopies:
-        d->collate = value.toBool();
-        break;
-    case PPK_ColorMode:
-        d->grayscale = (QPrinter::ColorMode(value.toInt()) == QPrinter::GrayScale);
-        break;
-    case PPK_Creator:
-        d->creator = value.toString();
-        break;
-    case PPK_DocumentName:
-        d->title = value.toString();
-        break;
-    case PPK_FullPage:
-        d->fullPage = value.toBool();
-        break;
-    case PPK_CopyCount: // fallthrough
-    case PPK_NumberOfCopies:
-        d->copies = value.toInt();
-        break;
-    case PPK_Orientation:
-        d->landscape = (QPrinter::Orientation(value.toInt()) == QPrinter::Landscape);
-        break;
-    case PPK_OutputFileName:
-        d->outputFileName = value.toString();
-        break;
-    case PPK_PageOrder:
-        d->pageOrder = QPrinter::PageOrder(value.toInt());
-        break;
-    case PPK_PaperSize:
-        d->printerPaperSize = QPrinter::PaperSize(value.toInt());
-        d->updatePaperSize();
-        break;
-    case PPK_PaperSource:
-        d->paperSource = QPrinter::PaperSource(value.toInt());
-        break;
-    case PPK_PrinterName:
-        d->printerName = value.toString();
-        break;
-    case PPK_PrinterProgram:
-        d->printProgram = value.toString();
-        break;
-    case PPK_Resolution:
-        d->resolution = value.toInt();
-        break;
-    case PPK_SelectionOption:
-        d->selectionOption = value.toString();
-        break;
-    case PPK_FontEmbedding:
-        d->embedFonts = value.toBool();
-        break;
-    case PPK_Duplex:
-        d->duplex = static_cast<QPrinter::DuplexMode> (value.toInt());
-        break;
-    case PPK_CupsPageRect:
-        d->cupsPageRect = value.toRect();
-        break;
-    case PPK_CupsPaperRect:
-        d->cupsPaperRect = value.toRect();
-        break;
-    case PPK_CupsOptions:
-        d->cupsOptions = value.toStringList();
-        break;
-    case PPK_CupsStringPageSize:
-        d->cupsStringPageSize = value.toString();
-        break;
-    case PPK_CustomPaperSize:
-        d->printerPaperSize = QPrinter::Custom;
-        d->customPaperSize = value.toSizeF();
-        d->updatePaperSize();
-        break;
-    case PPK_PageMargins:
-    {
-        QList<QVariant> margins(value.toList());
-        Q_ASSERT(margins.size() == 4);
-        d->leftMargin = margins.at(0).toReal();
-        d->topMargin = margins.at(1).toReal();
-        d->rightMargin = margins.at(2).toReal();
-        d->bottomMargin = margins.at(3).toReal();
-        break;
-    }
-    default:
-        break;
-    }
-}
-
-QVariant QPdfPrintEngine::property(PrintEnginePropertyKey key) const
-{
-    Q_D(const QPdfPrintEngine);
-
-    QVariant ret;
-    switch (int(key)) {
-    case PPK_CollateCopies:
-        ret = d->collate;
-        break;
-    case PPK_ColorMode:
-        ret = d->grayscale ? QPrinter::GrayScale : QPrinter::Color;
-        break;
-    case PPK_Creator:
-        ret = d->creator;
-        break;
-    case PPK_DocumentName:
-        ret = d->title;
-        break;
-    case PPK_FullPage:
-        ret = d->fullPage;
-        break;
-    case PPK_CopyCount:
-        ret = d->copies;
-        break;
-    case PPK_SupportsMultipleCopies:
-#if !defined(QT_NO_CUPS) && !defined(QT_NO_LIBRARY)
-        if (QCUPSSupport::isAvailable())
-            ret = true;
-        else
-#endif
-            ret = false;
-        break;
-    case PPK_NumberOfCopies:
-#if !defined(QT_NO_CUPS) && !defined(QT_NO_LIBRARY)
-        if (QCUPSSupport::isAvailable())
-            ret = 1;
-        else
-#endif
-            ret = d->copies;
-        break;
-    case PPK_Orientation:
-        ret = d->landscape ? QPrinter::Landscape : QPrinter::Portrait;
-        break;
-    case PPK_OutputFileName:
-        ret = d->outputFileName;
-        break;
-    case PPK_PageOrder:
-        ret = d->pageOrder;
-        break;
-    case PPK_PaperSize:
-        ret = d->paperSize;
-        break;
-    case PPK_PaperSource:
-        ret = d->paperSource;
-        break;
-    case PPK_PrinterName:
-        ret = d->printerName;
-        break;
-    case PPK_PrinterProgram:
-        ret = d->printProgram;
-        break;
-    case PPK_Resolution:
-        ret = d->resolution;
-        break;
-    case PPK_SupportedResolutions:
-        ret = QList<QVariant>() << 72;
-        break;
-    case PPK_PaperRect:
-        ret = d->paperRect();
-        break;
-    case PPK_PageRect:
-        ret = d->pageRect();
-        break;
-    case PPK_SelectionOption:
-        ret = d->selectionOption;
-        break;
-    case PPK_FontEmbedding:
-        ret = d->embedFonts;
-        break;
-    case PPK_Duplex:
-        ret = d->duplex;
-        break;
-    case PPK_CupsPageRect:
-        ret = d->cupsPageRect;
-        break;
-    case PPK_CupsPaperRect:
-        ret = d->cupsPaperRect;
-        break;
-    case PPK_CupsOptions:
-        ret = d->cupsOptions;
-        break;
-    case PPK_CupsStringPageSize:
-        ret = d->cupsStringPageSize;
-        break;
-    case PPK_CustomPaperSize:
-        ret = d->customPaperSize;
-        break;
-    case PPK_PageMargins:
-    {
-        QList<QVariant> margins;
-        margins << d->leftMargin << d->topMargin
-                << d->rightMargin << d->bottomMargin;
-        ret = margins;
-        break;
-    }
-    default:
-        break;
-    }
-    return ret;
-}
-
-
-#ifndef QT_NO_LPR
-static void closeAllOpenFds()
-{
-    // hack time... getting the maximum number of open
-    // files, if possible.  if not we assume it's the
-    // larger of 256 and the fd we got
-    int i;
-#if defined(_SC_OPEN_MAX)
-    i = (int)sysconf(_SC_OPEN_MAX);
-#elif defined(_POSIX_OPEN_MAX)
-    i = (int)_POSIX_OPEN_MAX;
-#elif defined(OPEN_MAX)
-    i = (int)OPEN_MAX;
-#else
-    i = 256;
-#endif
-    // leave stdin/out/err untouched
-    while(--i > 2)
-        QT_CLOSE(i);
-}
-#endif
-
-bool QPdfPrintEnginePrivate::openPrintDevice()
-{
-    if (outDevice)
-        return false;
-
-    if (!outputFileName.isEmpty()) {
-        QFile *file = new QFile(outputFileName);
-        if (! file->open(QFile::WriteOnly|QFile::Truncate)) {
-            delete file;
-            return false;
-        }
-        outDevice = file;
-#if !defined(QT_NO_CUPS) && !defined(QT_NO_LIBRARY)
-    } else if (QCUPSSupport::isAvailable()) {
-        QCUPSSupport cups;
-        QPair<int, QString> ret = cups.tempFd();
-        if (ret.first < 0) {
-            qWarning("QPdfPrinter: Could not open temporary file to print");
-            return false;
-        }
-        cupsTempFile = ret.second;
-        outDevice = new QFile();
-        static_cast<QFile *>(outDevice)->open(ret.first, QIODevice::WriteOnly);
-#endif
-#ifndef QT_NO_LPR
-    } else {
-        QString pr;
-        if (!printerName.isEmpty())
-            pr = printerName;
-        int fds[2];
-        if (qt_safe_pipe(fds) != 0) {
-            qWarning("QPdfPrinter: Could not open pipe to print");
-            return false;
-        }
-
-        pid_t pid = fork();
-        if (pid == 0) {       // child process
-            // if possible, exit quickly, so the actual lp/lpr
-            // becomes a child of init, and ::waitpid() is
-            // guaranteed not to wait.
-            if (fork() > 0) {
-                closeAllOpenFds();
-
-                // try to replace this process with "true" - this prevents
-                // global destructors from being called (that could possibly
-                // do wrong things to the parent process)
-                (void)execlp("true", "true", (char *)0);
-                (void)execl("/bin/true", "true", (char *)0);
-                (void)execl("/usr/bin/true", "true", (char *)0);
-                ::_exit(0);
-            }
-            qt_safe_dup2(fds[0], 0, 0);
-
-            closeAllOpenFds();
-
-            if (!printProgram.isEmpty()) {
-                if (!selectionOption.isEmpty())
-                    pr.prepend(selectionOption);
-                else
-                    pr.prepend(QLatin1String("-P"));
-                (void)execlp(printProgram.toLocal8Bit().data(), printProgram.toLocal8Bit().data(),
-                             pr.toLocal8Bit().data(), (char *)0);
-            } else {
-                // if no print program has been specified, be smart
-                // about the option string too.
-                QList<QByteArray> lprhack;
-                QList<QByteArray> lphack;
-                QByteArray media;
-                if (!pr.isEmpty() || !selectionOption.isEmpty()) {
-                    if (!selectionOption.isEmpty()) {
-                        QStringList list = selectionOption.split(QLatin1Char(' '));
-                        for (int i = 0; i < list.size(); ++i)
-                            lprhack.append(list.at(i).toLocal8Bit());
-                        lphack = lprhack;
-                    } else {
-                        lprhack.append("-P");
-                        lphack.append("-d");
-                    }
-                    lprhack.append(pr.toLocal8Bit());
-                    lphack.append(pr.toLocal8Bit());
-                }
-                lphack.append("-s");
-
-                char ** lpargs = new char *[lphack.size()+6];
-                char lp[] = "lp";
-                lpargs[0] = lp;
-                int i;
-                for (i = 0; i < lphack.size(); ++i)
-                    lpargs[i+1] = (char *)lphack.at(i).constData();
-#ifndef Q_OS_OSF
-                if (QPdf::paperSizeToString(printerPaperSize)) {
-                    char dash_o[] = "-o";
-                    lpargs[++i] = dash_o;
-                    lpargs[++i] = const_cast<char *>(QPdf::paperSizeToString(printerPaperSize));
-                    lpargs[++i] = dash_o;
-                    media = "media=";
-                    media += QPdf::paperSizeToString(printerPaperSize);
-                    lpargs[++i] = media.data();
-                }
-#endif
-                lpargs[++i] = 0;
-                char **lprargs = new char *[lprhack.size()+2];
-                char lpr[] = "lpr";
-                lprargs[0] = lpr;
-                for (int i = 0; i < lprhack.size(); ++i)
-                    lprargs[i+1] = (char *)lprhack[i].constData();
-                lprargs[lprhack.size() + 1] = 0;
-                (void)execvp("lp", lpargs);
-                (void)execvp("lpr", lprargs);
-                (void)execv("/bin/lp", lpargs);
-                (void)execv("/bin/lpr", lprargs);
-                (void)execv("/usr/bin/lp", lpargs);
-                (void)execv("/usr/bin/lpr", lprargs);
-
-                delete []lpargs;
-                delete []lprargs;
-            }
-            // if we couldn't exec anything, close the fd,
-            // wait for a second so the parent process (the
-            // child of the GUI process) has exited.  then
-            // exit.
-            QT_CLOSE(0);
-            (void)::sleep(1);
-            ::_exit(0);
-        }
-        // parent process
-        QT_CLOSE(fds[0]);
-        fd = fds[1];
-        (void)qt_safe_waitpid(pid, 0, 0);
-
-        if (fd < 0)
-            return false;
-
-        outDevice = new QFile();
-        static_cast<QFile *>(outDevice)->open(fd, QIODevice::WriteOnly);
-#endif
-    }
-
-    return true;
-}
-
-void QPdfPrintEnginePrivate::closePrintDevice()
-{
-#if !defined(QT_NO_CUPS) && !defined(QT_NO_LIBRARY)
-    if (!cupsTempFile.isEmpty()) {
-        QString tempFile = cupsTempFile;
-        cupsTempFile.clear();
-        QCUPSSupport cups;
-
-        // Set up print options.
-        QByteArray prnName;
-        QList<QPair<QByteArray, QByteArray> > options;
-        QVector<cups_option_t> cupsOptStruct;
-
-        if (!printerName.isEmpty()) {
-            prnName = printerName.toLocal8Bit();
-        } else {
-            QPrinterInfo def = QPrinterInfo::defaultPrinter();
-            if (def.isNull()) {
-                qWarning("Could not determine printer to print to");
-                QFile::remove(tempFile);
-                return;
-            }
-            prnName = def.printerName().toLocal8Bit();
-        }
-
-        if (!cupsStringPageSize.isEmpty()) {
-            options.append(QPair<QByteArray, QByteArray>("media", cupsStringPageSize.toLocal8Bit()));
-        }
-
-        if (copies > 1) {
-            options.append(QPair<QByteArray, QByteArray>("copies", QString::number(copies).toLocal8Bit()));
-        }
-
-        if (collate) {
-            options.append(QPair<QByteArray, QByteArray>("Collate", "True"));
-        }
-
-        if (duplex != QPrinter::DuplexNone) {
-            switch(duplex) {
-            case QPrinter::DuplexNone: break;
-            case QPrinter::DuplexAuto:
-                if (!landscape)
-                    options.append(QPair<QByteArray, QByteArray>("sides", "two-sided-long-edge"));
-                else
-                    options.append(QPair<QByteArray, QByteArray>("sides", "two-sided-short-edge"));
-                break;
-            case QPrinter::DuplexLongSide:
-                options.append(QPair<QByteArray, QByteArray>("sides", "two-sided-long-edge"));
-                break;
-            case QPrinter::DuplexShortSide:
-                options.append(QPair<QByteArray, QByteArray>("sides", "two-sided-short-edge"));
-                break;
-            }
-        }
-
-        if (QCUPSSupport::cupsVersion() >= 10300 && landscape) {
-            options.append(QPair<QByteArray, QByteArray>("landscape", ""));
-        }
-
-        QStringList::const_iterator it = cupsOptions.constBegin();
-        while (it != cupsOptions.constEnd()) {
-            options.append(QPair<QByteArray, QByteArray>((*it).toLocal8Bit(), (*(it+1)).toLocal8Bit()));
-            it += 2;
-        }
-
-        for (int c = 0; c < options.size(); ++c) {
-            cups_option_t opt;
-            opt.name = options[c].first.data();
-            opt.value = options[c].second.data();
-            cupsOptStruct.append(opt);
-        }
-
-        // Print the file.
-        cups_option_t* optPtr = cupsOptStruct.size() ? &cupsOptStruct.first() : 0;
-        cups.printFile(prnName.constData(), tempFile.toLocal8Bit().constData(),
-                title.toLocal8Bit().constData(), cupsOptStruct.size(), optPtr);
-
-        QFile::remove(tempFile);
-    }
-#endif
-}
-
-
-
-QPdfPrintEnginePrivate::QPdfPrintEnginePrivate(QPrinter::PrinterMode m)
-    : QPdfEnginePrivate(),
-      duplex(QPrinter::DuplexNone),
-      collate(false),
-      copies(1),
-      pageOrder(QPrinter::FirstPageFirst),
-      paperSource(QPrinter::Auto),
-      printerPaperSize(QPrinter::A4)
-{
-    resolution = 72;
-    if (m == QPrinter::HighResolution)
-        resolution = 1200;
-    else if (m == QPrinter::ScreenResolution)
-        resolution = qt_defaultDpi();
-}
-
-QPdfPrintEnginePrivate::~QPdfPrintEnginePrivate()
-{
-}
-
-
-void QPdfPrintEnginePrivate::updatePaperSize()
-{
-    if (printerPaperSize == QPrinter::Custom) {
-        paperSize = customPaperSize;
-    } else if (!cupsPaperRect.isNull()) {
-        QRect r = cupsPaperRect;
-        paperSize = r.size();
-    } else{
-        QPdf::PaperSize s = QPdf::paperSize(printerPaperSize);
-        paperSize = QSize(s.width, s.height);
-    }
-}
-
-
-QT_END_NAMESPACE
-
-#endif // QT_NO_PRINTER
diff --git a/src/gui/painting/qprintengine_pdf_p.h b/src/gui/painting/qprintengine_pdf_p.h
deleted file mode 100644
index 367e3aebab..0000000000
--- a/src/gui/painting/qprintengine_pdf_p.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#ifndef QPRINTENGINE_PDF_P_H
-#define QPRINTENGINE_PDF_P_H
-
-//
-//  W A R N I N G
-//  -------------
-//
-// This file is not part of the Qt API.  It exists purely as an
-// implementation detail.  This header file may change from version to
-// version without notice, or even be removed.
-//
-// We mean it.
-//
-
-#include "QtGui/qprintengine.h"
-
-#ifndef QT_NO_PRINTER
-#include "QtCore/qmap.h"
-#include "QtGui/qmatrix.h"
-#include "QtCore/qstring.h"
-#include "QtCore/qvector.h"
-#include "QtGui/qpaintengine.h"
-#include "QtGui/qpainterpath.h"
-#include "QtCore/qdatastream.h"
-
-#include "private/qfontengine_p.h"
-#include "private/qpdf_p.h"
-#include "private/qpaintengine_p.h"
-#include "qprintengine.h"
-
-QT_BEGIN_NAMESPACE
-
-class QImage;
-class QDataStream;
-class QPen;
-class QPointF;
-class QRegion;
-class QFile;
-class QPdfPrintEngine;
-
-#define PPK_CupsOptions QPrintEngine::PrintEnginePropertyKey(0xfe00)
-#define PPK_CupsPageRect QPrintEngine::PrintEnginePropertyKey(0xfe01)
-#define PPK_CupsPaperRect QPrintEngine::PrintEnginePropertyKey(0xfe02)
-#define PPK_CupsStringPageSize QPrintEngine::PrintEnginePropertyKey(0xfe03)
-
-namespace QPdf {
-
-    struct PaperSize {
-        int width, height; // in postscript points
-    };
-    Q_GUI_EXPORT PaperSize paperSize(QPrinter::PaperSize paperSize);
-    Q_GUI_EXPORT const char *paperSizeToString(QPrinter::PaperSize paperSize);
-}
-
-class QPdfPrintEnginePrivate;
-
-class QPdfPrintEngine : public QPdfEngine, public QPrintEngine
-{
-    Q_DECLARE_PRIVATE(QPdfPrintEngine)
-public:
-    QPdfPrintEngine(QPrinter::PrinterMode m);
-    virtual ~QPdfPrintEngine();
-
-    // reimplementations QPaintEngine
-    bool begin(QPaintDevice *pdev);
-    bool end();
-    // end reimplementations QPaintEngine
-
-    // reimplementations QPrintEngine
-    bool abort() {return false;}
-    QPrinter::PrinterState printerState() const {return state;}
-
-    bool newPage();
-    int metric(QPaintDevice::PaintDeviceMetric) const;
-    void setProperty(PrintEnginePropertyKey key, const QVariant &value);
-    QVariant property(PrintEnginePropertyKey key) const;
-    // end reimplementations QPrintEngine
-
-    QPrinter::PrinterState state;
-
-private:
-    Q_DISABLE_COPY(QPdfPrintEngine)
-};
-
-class QPdfPrintEnginePrivate : public QPdfEnginePrivate
-{
-    Q_DECLARE_PUBLIC(QPdfPrintEngine)
-public:
-    QPdfPrintEnginePrivate(QPrinter::PrinterMode m);
-    ~QPdfPrintEnginePrivate();
-
-    bool openPrintDevice();
-    void closePrintDevice();
-
-    void updatePaperSize();
-
-private:
-    Q_DISABLE_COPY(QPdfPrintEnginePrivate)
-
-    QString printerName;
-    QString printProgram;
-    QString selectionOption;
-    QStringList cupsOptions;
-    QString cupsStringPageSize;
-
-    QPrinter::DuplexMode duplex;
-    bool collate;
-    int copies;
-    QPrinter::PageOrder pageOrder;
-    QPrinter::PaperSource paperSource;
-
-    QPrinter::PaperSize printerPaperSize;
-    QRect cupsPaperRect;
-    QRect cupsPageRect;
-    QSizeF customPaperSize; // in postscript points
-};
-
-QT_END_NAMESPACE
-
-#endif // QT_NO_PRINTER
-
-#endif // QPRINTENGINE_PDF_P_H
diff --git a/src/gui/painting/qprinter.cpp b/src/gui/painting/qprinter.cpp
deleted file mode 100644
index bdbddf20c4..0000000000
--- a/src/gui/painting/qprinter.cpp
+++ /dev/null
@@ -1,2280 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include "qprinter_p.h"
-#include "qprinter.h"
-#include "qprintengine.h"
-#include "qprinterinfo.h"
-#include "qlist.h"
-#include <qcoreapplication.h>
-#include <qfileinfo.h>
-#if !defined(QT_NO_CUPS) && !defined(QT_NO_LIBRARY)
-#include "private/qcups_p.h"
-#endif
-
-#ifndef QT_NO_PRINTER
-
-#include <private/qguiapplication_p.h>
-#include <QtGui/QPlatformPrinterSupport>
-
-#if defined (Q_WS_WIN)
-#include <private/qprintengine_win_p.h>
-#elif defined (Q_WS_MAC)
-#include <private/qprintengine_mac_p.h>
-#elif defined (QTOPIA_PRINTENGINE)
-#include <private/qprintengine_qws_p.h>
-#endif
-
-#if defined(Q_WS_X11)
-#include <private/qt_x11_p.h>
-#endif
-
-#ifndef QT_NO_PDF
-#include "qprintengine_pdf_p.h"
-#endif
-
-#include <qpicture.h>
-#include <private/qpaintengine_preview_p.h>
-
-QT_BEGIN_NAMESPACE
-
-#define ABORT_IF_ACTIVE(location) \
-    if (d->printEngine->printerState() == QPrinter::Active) { \
-        qWarning("%s: Cannot be changed while printer is active", location); \
-        return; \
-    }
-
-// NB! This table needs to be in sync with QPrinter::PaperSize
-static const float qt_paperSizes[][2] = {
-    {210, 297}, // A4
-    {176, 250}, // B5
-    {215.9f, 279.4f}, // Letter
-    {215.9f, 355.6f}, // Legal
-    {190.5f, 254}, // Executive
-    {841, 1189}, // A0
-    {594, 841}, // A1
-    {420, 594}, // A2
-    {297, 420}, // A3
-    {148, 210}, // A5
-    {105, 148}, // A6
-    {74, 105}, // A7
-    {52, 74}, // A8
-    {37, 52}, // A8
-    {1000, 1414}, // B0
-    {707, 1000}, // B1
-    {31, 44}, // B10
-    {500, 707}, // B2
-    {353, 500}, // B3
-    {250, 353}, // B4
-    {125, 176}, // B6
-    {88, 125}, // B7
-    {62, 88}, // B8
-    {33, 62}, // B9
-    {163, 229}, // C5E
-    {105, 241}, // US Common
-    {110, 220}, // DLE
-    {210, 330}, // Folio
-    {431.8f, 279.4f}, // Ledger
-    {279.4f, 431.8f} // Tabloid
-};
-
-/// return the multiplier of converting from the unit value to postscript-points.
-Q_GUI_EXPORT double qt_multiplierForUnit(QPrinter::Unit unit, int resolution)
-{
-    switch(unit) {
-    case QPrinter::Millimeter:
-        return 2.83464566929;
-    case QPrinter::Point:
-        return 1.0;
-    case QPrinter::Inch:
-        return 72.0;
-    case QPrinter::Pica:
-        return 12;
-    case QPrinter::Didot:
-        return 1.065826771;
-    case QPrinter::Cicero:
-        return 12.789921252;
-    case QPrinter::DevicePixel:
-        return 72.0/resolution;
-    }
-    return 1.0;
-}
-
-// not static: it's needed in qpagesetupdialog_unix.cpp
-Q_GUI_EXPORT QSizeF qt_printerPaperSize(QPrinter::Orientation orientation,
-                           QPrinter::PaperSize paperSize,
-                           QPrinter::Unit unit,
-                           int resolution)
-{
-    int width_index = 0;
-    int height_index = 1;
-    if (orientation == QPrinter::Landscape) {
-        width_index = 1;
-        height_index = 0;
-    }
-    const qreal multiplier = qt_multiplierForUnit(unit, resolution);
-    return QSizeF((qt_paperSizes[paperSize][width_index] * 72 / 25.4) / multiplier,
-                  (qt_paperSizes[paperSize][height_index] * 72 / 25.4) / multiplier);
-}
-
-void QPrinterPrivate::createDefaultEngines()
-{
-    QPrinter::OutputFormat realOutputFormat = outputFormat;
-#if !defined (QTOPIA_PRINTENGINE)
-#if defined (Q_OS_UNIX) && ! defined (Q_WS_MAC)
-    if(outputFormat == QPrinter::NativeFormat) {
-        realOutputFormat = QPrinter::PdfFormat;
-    }
-#endif
-#endif
-
-    switch (realOutputFormat) {
-    case QPrinter::NativeFormat: {
-#if defined (Q_WS_QPA)
-        printEngine = QGuiApplicationPrivate::platformIntegration()->printerSupport()->createNativePrintEngine(printerMode);
-        paintEngine = QGuiApplicationPrivate::platformIntegration()->printerSupport()->createPaintEngine(printEngine, printerMode);
-#elif defined (Q_WS_WIN)
-        QWin32PrintEngine *winEngine = new QWin32PrintEngine(printerMode);
-        paintEngine = winEngine;
-        printEngine = winEngine;
-#elif defined (Q_WS_MAC)
-        QMacPrintEngine *macEngine = new QMacPrintEngine(printerMode);
-        paintEngine = macEngine;
-        printEngine = macEngine;
-#elif defined (QTOPIA_PRINTENGINE)
-        QtopiaPrintEngine *qwsEngine = new QtopiaPrintEngine(printerMode);
-        paintEngine = qwsEngine;
-        printEngine = qwsEngine;
-#elif defined (Q_OS_UNIX)
-        Q_ASSERT(false);
-#endif
-        }
-        break;
-    case QPrinter::PdfFormat: {
-        QPdfPrintEngine *pdfEngine = new QPdfPrintEngine(printerMode);
-        paintEngine = pdfEngine;
-        printEngine = pdfEngine;
-    }
-        break;
-    }
-    use_default_engine = true;
-    had_default_engines = true;
-}
-
-#ifndef QT_NO_PRINTPREVIEWWIDGET
-QList<const QPicture *> QPrinterPrivate::previewPages() const
-{
-    if (previewEngine)
-        return previewEngine->pages();
-    return QList<const QPicture *>();
-}
-
-void QPrinterPrivate::setPreviewMode(bool enable)
-{
-    Q_Q(QPrinter);
-    if (enable) {
-        if (!previewEngine)
-            previewEngine = new QPreviewPaintEngine;
-        had_default_engines = use_default_engine;
-        use_default_engine = false;
-        realPrintEngine = printEngine;
-        realPaintEngine = paintEngine;
-        q->setEngines(previewEngine, previewEngine);
-        previewEngine->setProxyEngines(realPrintEngine, realPaintEngine);
-    } else {
-        q->setEngines(realPrintEngine, realPaintEngine);
-        use_default_engine = had_default_engines;
-    }
-}
-#endif // QT_NO_PRINTPREVIEWWIDGET
-
-void QPrinterPrivate::addToManualSetList(QPrintEngine::PrintEnginePropertyKey key)
-{
-    for (int c = 0; c < manualSetList.size(); ++c) {
-        if (manualSetList[c] == key) return;
-    }
-    manualSetList.append(key);
-}
-
-
-/*!
-  \class QPrinter
-  \reentrant
-
-  \brief The QPrinter class is a paint device that paints on a printer.
-
-  \ingroup printing
-
-
-  This device represents a series of pages of printed output, and is
-  used in almost exactly the same way as other paint devices such as
-  QWidget and QPixmap.
-  A set of additional functions are provided to manage device-specific
-  features, such as orientation and resolution, and to step through
-  the pages in a document as it is generated.
-
-  When printing directly to a printer on Windows or Mac OS X, QPrinter uses
-  the built-in printer drivers. On X11, QPrinter uses the
-  \l{Common Unix Printing System (CUPS)} or the standard Unix \l lpr utility
-  to send PDF output to the printer. As an alternative,
-  the printProgram() function can be used to specify the command or utility
-  to use instead of the system default.
-
-  Note that setting parameters like paper size and resolution on an
-  invalid printer is undefined. You can use QPrinter::isValid() to
-  verify this before changing any parameters.
-
-  QPrinter supports a number of parameters, most of which can be
-  changed by the end user through a \l{QPrintDialog}{print dialog}. In
-  general, QPrinter passes these functions onto the underlying QPrintEngine.
-
-  The most important parameters are:
-  \list
-  \i setOrientation() tells QPrinter which page orientation to use.
-  \i setPaperSize() tells QPrinter what paper size to expect from the
-  printer.
-  \i setResolution() tells QPrinter what resolution you wish the
-  printer to provide, in dots per inch (DPI).
-  \i setFullPage() tells QPrinter whether you want to deal with the
-  full page or just with the part the printer can draw on.
-  \i setCopyCount() tells QPrinter how many copies of the document
-  it should print.
-  \endlist
-
-  Many of these functions can only be called before the actual printing
-  begins (i.e., before QPainter::begin() is called). This usually makes
-  sense because, for example, it's not possible to change the number of
-  copies when you are halfway through printing. There are also some
-  settings that the user sets (through the printer dialog) and that
-  applications are expected to obey. See QAbstractPrintDialog's
-  documentation for more details.
-
-  When QPainter::begin() is called, the QPrinter it operates on is prepared for
-  a new page, enabling the QPainter to be used immediately to paint the first
-  page in a document. Once the first page has been painted, newPage() can be
-  called to request a new blank page to paint on, or QPainter::end() can be
-  called to finish printing. The second page and all following pages are
-  prepared using a call to newPage() before they are painted.
-
-  The first page in a document does not need to be preceded by a call to
-  newPage(). You only need to calling newPage() after QPainter::begin() if you
-  need to insert a blank page at the beginning of a printed document.
-  Similarly, calling newPage() after the last page in a document is painted will
-  result in a trailing blank page appended to the end of the printed document.
-
-  If you want to abort the print job, abort() will try its best to
-  stop printing. It may cancel the entire job or just part of it.
-
-  Since QPrinter can print to any QPrintEngine subclass, it is possible to
-  extend printing support to cover new types of printing subsystem by
-  subclassing QPrintEngine and reimplementing its interface.
-
-  \sa QPrintDialog, {Printing with Qt}
-*/
-
-/*!
-    \enum QPrinter::PrinterState
-
-    \value Idle
-    \value Active
-    \value Aborted
-    \value Error
-*/
-
-/*!
-    \enum QPrinter::PrinterMode
-
-    This enum describes the mode the printer should work in. It
-    basically presets a certain resolution and working mode.
-
-    \value ScreenResolution Sets the resolution of the print device to
-    the screen resolution. This has the big advantage that the results
-    obtained when painting on the printer will match more or less
-    exactly the visible output on the screen. It is the easiest to
-    use, as font metrics on the screen and on the printer are the
-    same. This is the default value. ScreenResolution will produce a
-    lower quality output than HighResolution and should only be used
-    for drafts.
-
-    \value PrinterResolution This value is deprecated. Is is
-    equivalent to ScreenResolution on Unix and HighResolution on
-    Windows and Mac. Due do the difference between ScreenResolution
-    and HighResolution, use of this value may lead to non-portable
-    printer code.
-
-    \value HighResolution On Windows, sets the printer resolution to that
-    defined for the printer in use. For PDF printing, sets the
-    resolution of the PDF driver to 1200 dpi.
-
-    \note When rendering text on a QPrinter device, it is important
-    to realize that the size of text, when specified in points, is
-    independent of the resolution specified for the device itself.
-    Therefore, it may be useful to specify the font size in pixels
-    when combining text with graphics to ensure that their relative
-    sizes are what you expect.
-*/
-
-/*!
-  \enum QPrinter::Orientation
-
-  This enum type (not to be confused with \c Orientation) is used
-  to specify each page's orientation.
-
-  \value Portrait the page's height is greater than its width.
-
-  \value Landscape the page's width is greater than its height.
-
-  This type interacts with \l QPrinter::PaperSize and
-  QPrinter::setFullPage() to determine the final size of the page
-  available to the application.
-*/
-
-
-/*!
-    \enum QPrinter::PrintRange
-
-    Used to specify the print range selection option.
-
-    \value AllPages All pages should be printed.
-    \value Selection Only the selection should be printed.
-    \value PageRange The specified page range should be printed.
-    \value CurrentPage Only the current page should be printed.
-
-    \sa QAbstractPrintDialog::PrintRange
-*/
-
-/*!
-    \enum QPrinter::PrinterOption
-    \compat
-
-    Use QAbstractPrintDialog::PrintDialogOption instead.
-
-    \value PrintToFile
-    \value PrintSelection
-    \value PrintPageRange
-*/
-
-/*!
-  \enum QPrinter::PageSize
-
-  \obsolete
-  Use QPrinter::PaperSize instead.
-
-  \value A0 841 x 1189 mm
-  \value A1 594 x 841 mm
-  \value A2 420 x 594 mm
-  \value A3 297 x 420 mm
-  \value A4 210 x 297 mm, 8.26 x 11.69 inches
-  \value A5 148 x 210 mm
-  \value A6 105 x 148 mm
-  \value A7 74 x 105 mm
-  \value A8 52 x 74 mm
-  \value A9 37 x 52 mm
-  \value B0 1030 x 1456 mm
-  \value B1 728 x 1030 mm
-  \value B10 32 x 45 mm
-  \value B2 515 x 728 mm
-  \value B3 364 x 515 mm
-  \value B4 257 x 364 mm
-  \value B5 182 x 257 mm, 7.17 x 10.13 inches
-  \value B6 128 x 182 mm
-  \value B7 91 x 128 mm
-  \value B8 64 x 91 mm
-  \value B9 45 x 64 mm
-  \value C5E 163 x 229 mm
-  \value Comm10E 105 x 241 mm, U.S. Common 10 Envelope
-  \value DLE 110 x 220 mm
-  \value Executive 7.5 x 10 inches, 191 x 254 mm
-  \value Folio 210 x 330 mm
-  \value Ledger 432 x 279 mm
-  \value Legal 8.5 x 14 inches, 216 x 356 mm
-  \value Letter 8.5 x 11 inches, 216 x 279 mm
-  \value Tabloid 279 x 432 mm
-  \value Custom Unknown, or a user defined size.
-
-  \omitvalue NPageSize
-  */
-
-/*!
-  \enum QPrinter::PaperSize
-  \since 4.4
-
-  This enum type specifies what paper size QPrinter should use.
-  QPrinter does not check that the paper size is available; it just
-  uses this information, together with QPrinter::Orientation and
-  QPrinter::setFullPage(), to determine the printable area.
-
-  The defined sizes (with setFullPage(true)) are:
-
-  \value A0 841 x 1189 mm
-  \value A1 594 x 841 mm
-  \value A2 420 x 594 mm
-  \value A3 297 x 420 mm
-  \value A4 210 x 297 mm, 8.26 x 11.69 inches
-  \value A5 148 x 210 mm
-  \value A6 105 x 148 mm
-  \value A7 74 x 105 mm
-  \value A8 52 x 74 mm
-  \value A9 37 x 52 mm
-  \value B0 1000 x 1414 mm
-  \value B1 707 x 1000 mm
-  \value B2 500 x 707 mm
-  \value B3 353 x 500 mm
-  \value B4 250 x 353 mm
-  \value B5 176 x 250 mm, 6.93 x 9.84 inches
-  \value B6 125 x 176 mm
-  \value B7 88 x 125 mm
-  \value B8 62 x 88 mm
-  \value B9 33 x 62 mm
-  \value B10 31 x 44 mm
-  \value C5E 163 x 229 mm
-  \value Comm10E 105 x 241 mm, U.S. Common 10 Envelope
-  \value DLE 110 x 220 mm
-  \value Executive 7.5 x 10 inches, 190.5 x 254 mm
-  \value Folio 210 x 330 mm
-  \value Ledger 431.8 x 279.4 mm
-  \value Legal 8.5 x 14 inches, 215.9 x 355.6 mm
-  \value Letter 8.5 x 11 inches, 215.9 x 279.4 mm
-  \value Tabloid 279.4 x 431.8 mm
-  \value Custom Unknown, or a user defined size.
-
-  With setFullPage(false) (the default), the metrics will be a bit
-  smaller; how much depends on the printer in use.
-
-  \omitvalue NPageSize
-  \omitvalue NPaperSize
-*/
-
-
-/*!
-  \enum QPrinter::PageOrder
-
-  This enum type is used by QPrinter to tell the application program
-  how to print.
-
-  \value FirstPageFirst  the lowest-numbered page should be printed
-  first.
-
-  \value LastPageFirst  the highest-numbered page should be printed
-  first.
-*/
-
-/*!
-  \enum QPrinter::ColorMode
-
-  This enum type is used to indicate whether QPrinter should print
-  in color or not.
-
-  \value Color  print in color if available, otherwise in grayscale.
-
-  \value GrayScale  print in grayscale, even on color printers.
-*/
-
-/*!
-  \enum QPrinter::PaperSource
-
-  This enum type specifies what paper source QPrinter is to use.
-  QPrinter does not check that the paper source is available; it
-  just uses this information to try and set the paper source.
-  Whether it will set the paper source depends on whether the
-  printer has that particular source.
-
-  \warning This is currently only implemented for Windows.
-
-  \value Auto
-  \value Cassette
-  \value Envelope
-  \value EnvelopeManual
-  \value FormSource
-  \value LargeCapacity
-  \value LargeFormat
-  \value Lower
-  \value MaxPageSource
-  \value Middle
-  \value Manual
-  \value OnlyOne
-  \value Tractor
-  \value SmallFormat
-*/
-
-/*!
-  \enum QPrinter::Unit
-  \since 4.4
-
-  This enum type is used to specify the measurement unit for page and
-  paper sizes.
-
-  \value Millimeter
-  \value Point
-  \value Inch
-  \value Pica
-  \value Didot
-  \value Cicero
-  \value DevicePixel
-
-  Note the difference between Point and DevicePixel. The Point unit is
-  defined to be 1/72th of an inch, while the DevicePixel unit is
-  resolution dependant and is based on the actual pixels, or dots, on
-  the printer.
-*/
-
-
-/*
-  \enum QPrinter::PrintRange
-
-  This enum is used to specify which print range the application
-  should use to print.
-
-  \value AllPages All the pages should be printed.
-  \value Selection Only the selection should be printed.
-  \value PageRange Print according to the from page and to page options.
-  \value CurrentPage Only the current page should be printed.
-
-  \sa setPrintRange(), printRange()
-*/
-
-/*
-  \enum QPrinter::PrinterOption
-
-  This enum describes various printer options that appear in the
-  printer setup dialog. It is used to enable and disable these
-  options in the setup dialog.
-
-  \value PrintToFile Describes if print to file should be enabled.
-  \value PrintSelection Describes if printing selections should be enabled.
-  \value PrintPageRange Describes if printing page ranges (from, to) should
-  be enabled
-  \value PrintCurrentPage if Print Current Page option should be enabled
-
-  \sa setOptionEnabled(), isOptionEnabled()
-*/
-
-/*!
-    Creates a new printer object with the given \a mode.
-*/
-QPrinter::QPrinter(PrinterMode mode)
-    : QPaintDevice(),
-      d_ptr(new QPrinterPrivate(this))
-{
-    init(mode);
-    QPrinterInfo defPrn(QPrinterInfo::defaultPrinter());
-    if (!defPrn.isNull()) {
-        setPrinterName(defPrn.printerName());
-    } else if (QPrinterInfo::availablePrinters().isEmpty()
-               && d_ptr->paintEngine->type() != QPaintEngine::Windows
-               && d_ptr->paintEngine->type() != QPaintEngine::MacPrinter) {
-        setOutputFormat(QPrinter::PdfFormat);
-    }
-}
-
-/*!
-    \since 4.4
-
-    Creates a new printer object with the given \a printer and \a mode.
-*/
-QPrinter::QPrinter(const QPrinterInfo& printer, PrinterMode mode)
-    : QPaintDevice(),
-      d_ptr(new QPrinterPrivate(this))
-{
-    init(mode);
-    setPrinterName(printer.printerName());
-}
-
-void QPrinter::init(PrinterMode mode)
-{
-#if !defined(Q_WS_X11)
-    if (!QCoreApplication::instance()) {
-#else
-    if (!QCoreApplication::instance() || !X11) {
-#endif
-        qFatal("QPrinter: Must construct a QApplication before a QPaintDevice");
-        return;
-    }
-    Q_D(QPrinter);
-
-    d->printerMode = mode;
-    d->outputFormat = QPrinter::NativeFormat;
-    d->createDefaultEngines();
-
-#ifndef QT_NO_PRINTPREVIEWWIDGET
-    d->previewEngine = 0;
-#endif
-    d->realPrintEngine = 0;
-    d->realPaintEngine = 0;
-
-#if !defined(QT_NO_CUPS) && !defined(QT_NO_LIBRARY)
-    if (QCUPSSupport::cupsVersion() >= 10200 && QCUPSSupport().currentPPD()) {
-        setOutputFormat(QPrinter::PdfFormat);
-        d->outputFormat = QPrinter::NativeFormat;
-    }
-#endif
-}
-
-/*!
-    This function is used by subclasses of QPrinter to specify custom
-    print and paint engines (\a printEngine and \a paintEngine,
-    respectively).
-
-    QPrinter does not take ownership of the engines, so you need to
-    manage these engine instances yourself.
-
-    Note that changing the engines will reset the printer state and
-    all its properties.
-
-    \sa printEngine() paintEngine() setOutputFormat()
-
-    \since 4.1
-*/
-void QPrinter::setEngines(QPrintEngine *printEngine, QPaintEngine *paintEngine)
-{
-    Q_D(QPrinter);
-
-    if (d->use_default_engine)
-        delete d->printEngine;
-
-    d->printEngine = printEngine;
-    d->paintEngine = paintEngine;
-    d->use_default_engine = false;
-}
-
-/*!
-    Destroys the printer object and frees any allocated resources. If
-    the printer is destroyed while a print job is in progress this may
-    or may not affect the print job.
-*/
-QPrinter::~QPrinter()
-{
-    Q_D(QPrinter);
-    if (d->use_default_engine)
-        delete d->printEngine;
-#ifndef QT_NO_PRINTPREVIEWWIDGET
-    delete d->previewEngine;
-#endif
-}
-
-/*!
-    \enum QPrinter::OutputFormat
-
-    The OutputFormat enum is used to describe the format QPrinter should
-    use for printing.
-
-    \value NativeFormat QPrinter will print output using a method defined
-    by the platform it is running on. This mode is the default when printing
-    directly to a printer.
-
-    \value PdfFormat QPrinter will generate its output as a searchable PDF file.
-    This mode is the default when printing to a file.
-
-    \sa outputFormat(), setOutputFormat(), setOutputFileName()
-*/
-
-/*!
-    \since 4.1
-
-    Sets the output format for this printer to \a format.
-*/
-void QPrinter::setOutputFormat(OutputFormat format)
-{
-
-#ifndef QT_NO_PDF
-    Q_D(QPrinter);
-    if (d->validPrinter && d->outputFormat == format)
-        return;
-    d->outputFormat = format;
-
-    QPrintEngine *oldPrintEngine = d->printEngine;
-    const bool def_engine = d->use_default_engine;
-    d->printEngine = 0;
-
-    d->createDefaultEngines();
-
-    if (oldPrintEngine) {
-        for (int i = 0; i < d->manualSetList.size(); ++i) {
-            QPrintEngine::PrintEnginePropertyKey key = d->manualSetList[i];
-            QVariant prop;
-            // PPK_NumberOfCopies need special treatmeant since it in most cases
-            // will return 1, disregarding the actual value that was set
-            if (key == QPrintEngine::PPK_NumberOfCopies)
-                prop = QVariant(copyCount());
-            else
-                prop = oldPrintEngine->property(key);
-            if (prop.isValid())
-                d->printEngine->setProperty(key, prop);
-        }
-    }
-
-    if (def_engine)
-        delete oldPrintEngine;
-
-    if (d->outputFormat == QPrinter::PdfFormat)
-        d->validPrinter = true;
-#else
-    Q_UNUSED(format);
-#endif
-}
-
-/*!
-    \since 4.1
-
-    Returns the output format for this printer.
-*/
-QPrinter::OutputFormat QPrinter::outputFormat() const
-{
-    Q_D(const QPrinter);
-    return d->outputFormat;
-}
-
-
-
-/*! \internal
-*/
-int QPrinter::devType() const
-{
-    return QInternal::Printer;
-}
-
-/*!
-    Returns the printer name. This value is initially set to the name
-    of the default printer.
-
-    \sa setPrinterName()
-*/
-QString QPrinter::printerName() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->property(QPrintEngine::PPK_PrinterName).toString();
-}
-
-/*!
-    Sets the printer name to \a name.
-
-    \sa printerName(), isValid()
-*/
-void QPrinter::setPrinterName(const QString &name)
-{
-    Q_D(QPrinter);
-    ABORT_IF_ACTIVE("QPrinter::setPrinterName");
-
-#if defined(Q_OS_UNIX) && !defined(QT_NO_CUPS)
-    if(d->use_default_engine && d->outputFormat == QPrinter::NativeFormat) {
-        setOutputFormat(QPrinter::PdfFormat);
-        d->outputFormat = QPrinter::NativeFormat;
-    }
-#endif
-
-    QList<QPrinterInfo> prnList = QPrinterInfo::availablePrinters();
-    if (name.isEmpty()) {
-        d->validPrinter = d->outputFormat == QPrinter::PdfFormat;
-    } else {
-        d->validPrinter = false;
-        for (int i = 0; i < prnList.size(); ++i) {
-            if (prnList[i].printerName() == name) {
-                d->validPrinter = true;
-                break;
-            }
-        }
-    }
-
-    d->printEngine->setProperty(QPrintEngine::PPK_PrinterName, name);
-    d->addToManualSetList(QPrintEngine::PPK_PrinterName);
-}
-
-
-/*!
-  \since 4.4
-
-  Returns true if the printer currently selected is a valid printer
-  in the system, or a pure PDF printer; otherwise returns false.
-
-  To detect other failures check the output of QPainter::begin() or QPrinter::newPage().
-
-  \snippet doc/src/snippets/printing-qprinter/errors.cpp 0
-
-  \sa setPrinterName()
-*/
-bool QPrinter::isValid() const
-{
-    Q_D(const QPrinter);
-#if defined(Q_WS_X11)
-    if (!qApp || !X11) {
-        return false;
-    }
-#endif
-    return d->validPrinter;
-}
-
-
-/*!
-  \fn bool QPrinter::outputToFile() const
-
-  Returns true if the output should be written to a file, or false
-  if the output should be sent directly to the printer. The default
-  setting is false.
-
-  \sa setOutputToFile(), setOutputFileName()
-*/
-
-
-/*!
-  \fn void QPrinter::setOutputToFile(bool enable)
-
-  Specifies whether the output should be written to a file or sent
-  directly to the printer.
-
-  Will output to a file if \a enable is true, or will output
-  directly to the printer if \a enable is false.
-
-  \sa outputToFile(), setOutputFileName()
-*/
-
-
-/*!
-  \fn QString QPrinter::outputFileName() const
-
-  Returns the name of the output file. By default, this is an empty string
-  (indicating that the printer shouldn't print to file).
-
-  \sa QPrintEngine::PrintEnginePropertyKey
-
-*/
-
-QString QPrinter::outputFileName() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->property(QPrintEngine::PPK_OutputFileName).toString();
-}
-
-/*!
-    Sets the name of the output file to \a fileName.
-
-    Setting a null or empty name (0 or "") disables printing to a file.
-    Setting a non-empty name enables printing to a file.
-
-    This can change the value of outputFormat().
-    If the file name has the ".pdf" suffix PDF is generated. If the file name
-    has a suffix other than ".pdf", the output format used is the
-    one set with setOutputFormat().
-
-    QPrinter uses Qt's cross-platform PDF print engines
-    respectively. If you can produce this format natively, for example
-    Mac OS X can generate PDF's from its print engine, set the output format
-    back to NativeFormat.
-
-    \sa outputFileName() setOutputToFile() setOutputFormat()
-*/
-
-void QPrinter::setOutputFileName(const QString &fileName)
-{
-    Q_D(QPrinter);
-    ABORT_IF_ACTIVE("QPrinter::setOutputFileName");
-
-    QFileInfo fi(fileName);
-    if (!fi.suffix().compare(QLatin1String("pdf"), Qt::CaseInsensitive))
-        setOutputFormat(QPrinter::PdfFormat);
-    else if (fileName.isEmpty())
-        setOutputFormat(QPrinter::NativeFormat);
-
-    d->printEngine->setProperty(QPrintEngine::PPK_OutputFileName, fileName);
-    d->addToManualSetList(QPrintEngine::PPK_OutputFileName);
-}
-
-
-/*!
-  Returns the name of the program that sends the print output to the
-  printer.
-
-  The default is to return an empty string; meaning that QPrinter will try to
-  be smart in a system-dependent way. On X11 only, you can set it to something
-  different to use a specific print program. On the other platforms, this
-  returns an empty string.
-
-  \sa setPrintProgram(), setPrinterSelectionOption()
-*/
-QString QPrinter::printProgram() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->property(QPrintEngine::PPK_PrinterProgram).toString();
-}
-
-
-/*!
-  Sets the name of the program that should do the print job to \a
-  printProg.
-
-  On X11, this function sets the program to call with the PDF
-  output. On other platforms, it has no effect.
-
-  \sa printProgram()
-*/
-void QPrinter::setPrintProgram(const QString &printProg)
-{
-    Q_D(QPrinter);
-    ABORT_IF_ACTIVE("QPrinter::setPrintProgram");
-    d->printEngine->setProperty(QPrintEngine::PPK_PrinterProgram, printProg);
-    d->addToManualSetList(QPrintEngine::PPK_PrinterProgram);
-}
-
-
-/*!
-  Returns the document name.
-
-  \sa setDocName(), QPrintEngine::PrintEnginePropertyKey
-*/
-QString QPrinter::docName() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->property(QPrintEngine::PPK_DocumentName).toString();
-}
-
-
-/*!
-  Sets the document name to \a name.
-
-  On X11, the document name is for example used as the default
-  output filename in QPrintDialog. Note that the document name does
-  not affect the file name if the printer is printing to a file.
-  Use the setOutputFile() function for this.
-
-  \sa docName(), QPrintEngine::PrintEnginePropertyKey
-*/
-void QPrinter::setDocName(const QString &name)
-{
-    Q_D(QPrinter);
-    ABORT_IF_ACTIVE("QPrinter::setDocName");
-    d->printEngine->setProperty(QPrintEngine::PPK_DocumentName, name);
-    d->addToManualSetList(QPrintEngine::PPK_DocumentName);
-}
-
-
-/*!
-  Returns the name of the application that created the document.
-
-  \sa setCreator()
-*/
-QString QPrinter::creator() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->property(QPrintEngine::PPK_Creator).toString();
-}
-
-
-/*!
-  Sets the name of the application that created the document to \a
-  creator.
-
-  This function is only applicable to the X11 version of Qt. If no
-  creator name is specified, the creator will be set to "Qt"
-  followed by some version number.
-
-  \sa creator()
-*/
-void QPrinter::setCreator(const QString &creator)
-{
-    Q_D(QPrinter);
-    ABORT_IF_ACTIVE("QPrinter::setCreator");
-    d->printEngine->setProperty(QPrintEngine::PPK_Creator, creator);
-    d->addToManualSetList(QPrintEngine::PPK_Creator);
-}
-
-
-/*!
-  Returns the orientation setting. This is driver-dependent, but is usually
-  QPrinter::Portrait.
-
-  \sa setOrientation()
-*/
-QPrinter::Orientation QPrinter::orientation() const
-{
-    Q_D(const QPrinter);
-    return QPrinter::Orientation(d->printEngine->property(QPrintEngine::PPK_Orientation).toInt());
-}
-
-
-/*!
-  Sets the print orientation to \a orientation.
-
-  The orientation can be either QPrinter::Portrait or
-  QPrinter::Landscape.
-
-  The printer driver reads this setting and prints using the
-  specified orientation.
-
-  On Windows, this option can be changed while printing and will
-  take effect from the next call to newPage().
-
-  On Mac OS X, changing the orientation during a print job has no effect.
-
-  \sa orientation()
-*/
-
-void QPrinter::setOrientation(Orientation orientation)
-{
-    Q_D(QPrinter);
-    d->printEngine->setProperty(QPrintEngine::PPK_Orientation, orientation);
-    d->addToManualSetList(QPrintEngine::PPK_Orientation);
-}
-
-
-/*!
-    \since 4.4
-    Returns the printer paper size. The default value is driver-dependent.
-
-    \sa setPaperSize() pageRect() paperRect()
-*/
-
-QPrinter::PaperSize QPrinter::paperSize() const
-{
-    Q_D(const QPrinter);
-    return QPrinter::PaperSize(d->printEngine->property(QPrintEngine::PPK_PaperSize).toInt());
-}
-
-/*!
-    \since 4.4
-
-    Sets the printer paper size to \a newPaperSize if that size is
-    supported. The result is undefined if \a newPaperSize is not
-    supported.
-
-    The default paper size is driver-dependent.
-
-    This function is useful mostly for setting a default value that
-    the user can override in the print dialog.
-
-    \sa paperSize() PaperSize setFullPage() setResolution() pageRect() paperRect()
-*/
-void QPrinter::setPaperSize(PaperSize newPaperSize)
-{
-    Q_D(QPrinter);
-    if (d->paintEngine->type() != QPaintEngine::Pdf)
-        ABORT_IF_ACTIVE("QPrinter::setPaperSize");
-    if (newPaperSize < 0 || newPaperSize >= NPaperSize) {
-        qWarning("QPrinter::setPaperSize: Illegal paper size %d", newPaperSize);
-        return;
-    }
-    d->printEngine->setProperty(QPrintEngine::PPK_PaperSize, newPaperSize);
-    d->addToManualSetList(QPrintEngine::PPK_PaperSize);
-    d->hasUserSetPageSize = true;
-}
-
-/*!
-    \obsolete
-
-    Returns the printer page size. The default value is driver-dependent.
-
-    Use paperSize() instead.
-*/
-QPrinter::PageSize QPrinter::pageSize() const
-{
-    return paperSize();
-}
-
-
-/*!
-    \obsolete
-
-    Sets the printer page size based on \a newPageSize.
-
-    Use setPaperSize() instead.
-*/
-
-void QPrinter::setPageSize(PageSize newPageSize)
-{
-    setPaperSize(newPageSize);
-}
-
-/*!
-    \since 4.4
-
-    Sets the paper size based on \a paperSize in \a unit.
-
-    \sa paperSize()
-*/
-
-void QPrinter::setPaperSize(const QSizeF &paperSize, QPrinter::Unit unit)
-{
-    Q_D(QPrinter);
-    if (d->paintEngine->type() != QPaintEngine::Pdf)
-        ABORT_IF_ACTIVE("QPrinter::setPaperSize");
-    const qreal multiplier = qt_multiplierForUnit(unit, resolution());
-    QSizeF size(paperSize.width() * multiplier, paperSize.height() * multiplier);
-    d->printEngine->setProperty(QPrintEngine::PPK_CustomPaperSize, size);
-    d->addToManualSetList(QPrintEngine::PPK_CustomPaperSize);
-    d->hasUserSetPageSize = true;
-}
-
-/*!
-    \since 4.4
-
-    Returns the paper size in \a unit.
-
-    \sa setPaperSize()
-*/
-
-QSizeF QPrinter::paperSize(Unit unit) const
-{
-    Q_D(const QPrinter);
-    int res = resolution();
-    const qreal multiplier = qt_multiplierForUnit(unit, res);
-    PaperSize paperType = paperSize();
-    if (paperType == Custom) {
-        QSizeF size = d->printEngine->property(QPrintEngine::PPK_CustomPaperSize).toSizeF();
-        return QSizeF(size.width() / multiplier, size.height() / multiplier);
-    }
-    else {
-        return qt_printerPaperSize(orientation(), paperType, unit, res);
-    }
-}
-
-/*!
-    Sets the page order to \a pageOrder.
-
-    The page order can be QPrinter::FirstPageFirst or
-    QPrinter::LastPageFirst. The application is responsible for
-    reading the page order and printing accordingly.
-
-    This function is mostly useful for setting a default value that
-    the user can override in the print dialog.
-
-    This function is only supported under X11.
-*/
-
-void QPrinter::setPageOrder(PageOrder pageOrder)
-{
-    Q_D(QPrinter);
-    ABORT_IF_ACTIVE("QPrinter::setPageOrder");
-    d->printEngine->setProperty(QPrintEngine::PPK_PageOrder, pageOrder);
-    d->addToManualSetList(QPrintEngine::PPK_PageOrder);
-}
-
-
-/*!
-  Returns the current page order.
-
-  The default page order is \c FirstPageFirst.
-*/
-
-QPrinter::PageOrder QPrinter::pageOrder() const
-{
-    Q_D(const QPrinter);
-    return QPrinter::PageOrder(d->printEngine->property(QPrintEngine::PPK_PageOrder).toInt());
-}
-
-
-/*!
-  Sets the printer's color mode to \a newColorMode, which can be
-  either \c Color or \c GrayScale.
-
-  \sa colorMode()
-*/
-
-void QPrinter::setColorMode(ColorMode newColorMode)
-{
-    Q_D(QPrinter);
-    ABORT_IF_ACTIVE("QPrinter::setColorMode");
-    d->printEngine->setProperty(QPrintEngine::PPK_ColorMode, newColorMode);
-    d->addToManualSetList(QPrintEngine::PPK_ColorMode);
-}
-
-
-/*!
-  Returns the current color mode.
-
-  \sa setColorMode()
-*/
-QPrinter::ColorMode QPrinter::colorMode() const
-{
-    Q_D(const QPrinter);
-    return QPrinter::ColorMode(d->printEngine->property(QPrintEngine::PPK_ColorMode).toInt());
-}
-
-
-/*!
-  \obsolete
-  Returns the number of copies to be printed. The default value is 1.
-
-  On Windows, Mac OS X and X11 systems that support CUPS, this will always
-  return 1 as these operating systems can internally handle the number
-  of copies.
-
-  On X11, this value will return the number of times the application is
-  required to print in order to match the number specified in the printer setup
-  dialog. This has been done since some printer drivers are not capable of
-  buffering up the copies and in those cases the application must make an
-  explicit call to the print code for each copy.
-
-  Use copyCount() in conjunction with supportsMultipleCopies() instead.
-
-  \sa setNumCopies(), actualNumCopies()
-*/
-
-int QPrinter::numCopies() const
-{
-    Q_D(const QPrinter);
-   return d->printEngine->property(QPrintEngine::PPK_NumberOfCopies).toInt();
-}
-
-
-/*!
-    \obsolete
-    \since 4.6
-
-    Returns the number of copies that will be printed. The default
-    value is 1.
-
-    This function always returns the actual value specified in the print
-    dialog or using setNumCopies().
-
-    Use copyCount() instead.
-
-    \sa setNumCopies(), numCopies()
-*/
-int QPrinter::actualNumCopies() const
-{
-    return copyCount();
-}
-
-
-
-/*!
-  \obsolete
-  Sets the number of copies to be printed to \a numCopies.
-
-  The printer driver reads this setting and prints the specified
-  number of copies.
-
-  Use setCopyCount() instead.
-
-  \sa numCopies()
-*/
-
-void QPrinter::setNumCopies(int numCopies)
-{
-    Q_D(QPrinter);
-    ABORT_IF_ACTIVE("QPrinter::setNumCopies");
-    d->printEngine->setProperty(QPrintEngine::PPK_NumberOfCopies, numCopies);
-    d->addToManualSetList(QPrintEngine::PPK_NumberOfCopies);
-}
-
-/*!
-    \since 4.7
-
-    Sets the number of copies to be printed to \a count.
-
-    The printer driver reads this setting and prints the specified number of
-    copies.
-
-    \sa copyCount(), supportsMultipleCopies()
-*/
-
-void QPrinter::setCopyCount(int count)
-{
-    Q_D(QPrinter);
-    ABORT_IF_ACTIVE("QPrinter::setCopyCount;");
-    d->printEngine->setProperty(QPrintEngine::PPK_CopyCount, count);
-    d->addToManualSetList(QPrintEngine::PPK_CopyCount);
-}
-
-/*!
-    \since 4.7
-
-    Returns the number of copies that will be printed. The default value is 1.
-
-    \sa setCopyCount(), supportsMultipleCopies()
-*/
-
-int QPrinter::copyCount() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->property(QPrintEngine::PPK_CopyCount).toInt();
-}
-
-/*!
-    \since 4.7
-
-    Returns true if the printer supports printing multiple copies of the same
-    document in one job; otherwise false is returned.
-
-    On most systems this function will return true. However, on X11 systems
-    that do not support CUPS, this function will return false. That means the
-    application has to handle the number of copies by printing the same
-    document the required number of times.
-
-    \sa setCopyCount(), copyCount()
-*/
-
-bool QPrinter::supportsMultipleCopies() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->property(QPrintEngine::PPK_SupportsMultipleCopies).toBool();
-}
-
-/*!
-    \since 4.1
-
-    Returns true if collation is turned on when multiple copies is selected.
-    Returns false if it is turned off when multiple copies is selected.
-    When collating is turned off the printing of each individual page will be repeated
-    the numCopies() amount before the next page is started. With collating turned on
-    all pages are printed before the next copy of those pages is started.
-
-    \sa setCollateCopies()
-*/
-bool QPrinter::collateCopies() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->property(QPrintEngine::PPK_CollateCopies).toBool();
-}
-
-
-/*!
-    \since 4.1
-
-    Sets the default value for collation checkbox when the print
-    dialog appears.  If \a collate is true, it will enable
-    setCollateCopiesEnabled().  The default value is false. This value
-    will be changed by what the user presses in the print dialog.
-
-    \sa collateCopies()
-*/
-void QPrinter::setCollateCopies(bool collate)
-{
-    Q_D(QPrinter);
-    ABORT_IF_ACTIVE("QPrinter::setCollateCopies");
-    d->printEngine->setProperty(QPrintEngine::PPK_CollateCopies, collate);
-    d->addToManualSetList(QPrintEngine::PPK_CollateCopies);
-}
-
-
-
-/*!
-  If \a fp is true, enables support for painting over the entire page;
-  otherwise restricts painting to the printable area reported by the
-  device.
-
-  By default, full page printing is disabled. In this case, the origin
-  of the QPrinter's coordinate system coincides with the top-left
-  corner of the printable area.
-
-  If full page printing is enabled, the origin of the QPrinter's
-  coordinate system coincides with the top-left corner of the paper
-  itself. In this case, the
-  \l{QPaintDevice::PaintDeviceMetric}{device metrics} will report
-  the exact same dimensions as indicated by \l{PaperSize}. It may not
-  be possible to print on the entire physical page because of the
-  printer's margins, so the application must account for the margins
-  itself.
-
-  \sa fullPage(), setPaperSize(), width(), height(), {Printing with Qt}
-*/
-
-void QPrinter::setFullPage(bool fp)
-{
-    Q_D(QPrinter);
-    d->printEngine->setProperty(QPrintEngine::PPK_FullPage, fp);
-    d->addToManualSetList(QPrintEngine::PPK_FullPage);
-}
-
-
-/*!
-  Returns true if the origin of the printer's coordinate system is
-  at the corner of the page and false if it is at the edge of the
-  printable area.
-
-  See setFullPage() for details and caveats.
-
-  \sa setFullPage() PaperSize
-*/
-
-bool QPrinter::fullPage() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->property(QPrintEngine::PPK_FullPage).toBool();
-}
-
-
-/*!
-  Requests that the printer prints at \a dpi or as near to \a dpi as
-  possible.
-
-  This setting affects the coordinate system as returned by, for
-  example QPainter::viewport().
-
-  This function must be called before QPainter::begin() to have an effect on
-  all platforms.
-
-  \sa resolution() setPaperSize()
-*/
-
-void QPrinter::setResolution(int dpi)
-{
-    Q_D(QPrinter);
-    ABORT_IF_ACTIVE("QPrinter::setResolution");
-    d->printEngine->setProperty(QPrintEngine::PPK_Resolution, dpi);
-    d->addToManualSetList(QPrintEngine::PPK_Resolution);
-}
-
-
-/*!
-  Returns the current assumed resolution of the printer, as set by
-  setResolution() or by the printer driver.
-
-  \sa setResolution()
-*/
-
-int QPrinter::resolution() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->property(QPrintEngine::PPK_Resolution).toInt();
-}
-
-/*!
-  Sets the paper source setting to \a source.
-
-  Windows only: This option can be changed while printing and will
-  take effect from the next call to newPage()
-
-  \sa paperSource()
-*/
-
-void QPrinter::setPaperSource(PaperSource source)
-{
-    Q_D(QPrinter);
-    d->printEngine->setProperty(QPrintEngine::PPK_PaperSource, source);
-    d->addToManualSetList(QPrintEngine::PPK_PaperSource);
-}
-
-/*!
-    Returns the printer's paper source. This is \c Manual or a printer
-    tray or paper cassette.
-*/
-QPrinter::PaperSource QPrinter::paperSource() const
-{
-    Q_D(const QPrinter);
-    return QPrinter::PaperSource(d->printEngine->property(QPrintEngine::PPK_PaperSource).toInt());
-}
-
-
-/*!
-  \since 4.1
-
-  Enabled or disables font embedding depending on \a enable.
-
-  Currently this option is only supported on X11.
-
-  \sa fontEmbeddingEnabled()
-*/
-void QPrinter::setFontEmbeddingEnabled(bool enable)
-{
-    Q_D(QPrinter);
-    d->printEngine->setProperty(QPrintEngine::PPK_FontEmbedding, enable);
-    d->addToManualSetList(QPrintEngine::PPK_FontEmbedding);
-}
-
-/*!
-  \since 4.1
-
-  Returns true if font embedding is enabled.
-
-  Currently this option is only supported on X11.
-
-  \sa setFontEmbeddingEnabled()
-*/
-bool QPrinter::fontEmbeddingEnabled() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->property(QPrintEngine::PPK_FontEmbedding).toBool();
-}
-
-/*!
-    \enum QPrinter::DuplexMode
-    \since 4.4
-
-    This enum is used to indicate whether printing will occur on one or both sides
-    of each sheet of paper (simplex or duplex printing).
-
-    \value DuplexNone       Single sided (simplex) printing only.
-    \value DuplexAuto       The printer's default setting is used to determine whether
-                            duplex printing is used.
-    \value DuplexLongSide   Both sides of each sheet of paper are used for printing.
-                            The paper is turned over its longest edge before the second
-                            side is printed
-    \value DuplexShortSide  Both sides of each sheet of paper are used for printing.
-                            The paper is turned over its shortest edge before the second
-                            side is printed
-*/
-
-/*!
-  \since 4.2
-
-  Enables double sided printing if \a doubleSided is true; otherwise disables it.
-
-  Currently this option is only supported on X11.
-*/
-void QPrinter::setDoubleSidedPrinting(bool doubleSided)
-{
-    setDuplex(doubleSided ? DuplexAuto : DuplexNone);
-}
-
-
-/*!
-  \since 4.2
-
-  Returns true if double side printing is enabled.
-
-  Currently this option is only supported on X11.
-*/
-bool QPrinter::doubleSidedPrinting() const
-{
-    return duplex() != DuplexNone;
-}
-
-/*!
-  \since 4.4
-
-  Enables double sided printing based on the \a duplex mode.
-
-  Currently this option is only supported on X11.
-*/
-void QPrinter::setDuplex(DuplexMode duplex)
-{
-    Q_D(QPrinter);
-    d->printEngine->setProperty(QPrintEngine::PPK_Duplex, duplex);
-    d->addToManualSetList(QPrintEngine::PPK_Duplex);
-}
-
-/*!
-  \since 4.4
-
-  Returns the current duplex mode.
-
-  Currently this option is only supported on X11.
-*/
-QPrinter::DuplexMode QPrinter::duplex() const
-{
-    Q_D(const QPrinter);
-    return static_cast <DuplexMode> (d->printEngine->property(QPrintEngine::PPK_Duplex).toInt());
-}
-
-/*!
-    \since 4.4
-
-    Returns the page's rectangle in \a unit; this is usually smaller
-    than the paperRect() since the page normally has margins between
-    its borders and the paper.
-
-    \sa paperSize()
-*/
-QRectF QPrinter::pageRect(Unit unit) const
-{
-    Q_D(const QPrinter);
-    int res = resolution();
-    const qreal multiplier = qt_multiplierForUnit(unit, res);
-    // the page rect is in device pixels
-    QRect devRect(d->printEngine->property(QPrintEngine::PPK_PageRect).toRect());
-    if (unit == DevicePixel)
-        return devRect;
-    QRectF diRect(devRect.x()*72.0/res,
-                  devRect.y()*72.0/res,
-                  devRect.width()*72.0/res,
-                  devRect.height()*72.0/res);
-    return QRectF(diRect.x()/multiplier, diRect.y()/multiplier,
-                  diRect.width()/multiplier, diRect.height()/multiplier);
-}
-
-
-/*!
-    \since 4.4
-
-    Returns the paper's rectangle in \a unit; this is usually larger
-    than the pageRect().
-
-   \sa pageRect()
-*/
-QRectF QPrinter::paperRect(Unit unit) const
-{
-    Q_D(const QPrinter);
-    int res = resolution();
-    const qreal multiplier = qt_multiplierForUnit(unit, resolution());
-    // the page rect is in device pixels
-    QRect devRect(d->printEngine->property(QPrintEngine::PPK_PaperRect).toRect());
-    if (unit == DevicePixel)
-        return devRect;
-    QRectF diRect(devRect.x()*72.0/res,
-                  devRect.y()*72.0/res,
-                  devRect.width()*72.0/res,
-                  devRect.height()*72.0/res);
-    return QRectF(diRect.x()/multiplier, diRect.y()/multiplier,
-                  diRect.width()/multiplier, diRect.height()/multiplier);
-}
-
-/*!
-    Returns the page's rectangle; this is usually smaller than the
-    paperRect() since the page normally has margins between its
-    borders and the paper.
-
-    The unit of the returned rectangle is DevicePixel.
-
-    \sa paperSize()
-*/
-QRect QPrinter::pageRect() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->property(QPrintEngine::PPK_PageRect).toRect();
-}
-
-/*!
-    Returns the paper's rectangle; this is usually larger than the
-    pageRect().
-
-    The unit of the returned rectangle is DevicePixel.
-
-    \sa pageRect()
-*/
-QRect QPrinter::paperRect() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->property(QPrintEngine::PPK_PaperRect).toRect();
-}
-
-
-/*!
-    \since 4.4
-
-    This function sets the \a left, \a top, \a right and \a bottom
-    page margins for this printer. The unit of the margins are
-    specified with the \a unit parameter.
-*/
-void QPrinter::setPageMargins(qreal left, qreal top, qreal right, qreal bottom, QPrinter::Unit unit)
-{
-    Q_D(QPrinter);
-    const qreal multiplier = qt_multiplierForUnit(unit, resolution());
-    QList<QVariant> margins;
-    margins << (left * multiplier) << (top * multiplier)
-            << (right * multiplier) << (bottom * multiplier);
-    d->printEngine->setProperty(QPrintEngine::PPK_PageMargins, margins);
-    d->addToManualSetList(QPrintEngine::PPK_PageMargins);
-    d->hasCustomPageMargins = true;
-}
-
-/*!
-    \since 4.4
-
-    Returns the page margins for this printer in \a left, \a top, \a
-    right, \a bottom. The unit of the returned margins are specified
-    with the \a unit parameter.
-*/
-void QPrinter::getPageMargins(qreal *left, qreal *top, qreal *right, qreal *bottom, QPrinter::Unit unit) const
-{
-    Q_D(const QPrinter);
-    Q_ASSERT(left && top && right && bottom);
-    const qreal multiplier = qt_multiplierForUnit(unit, resolution());
-    QList<QVariant> margins(d->printEngine->property(QPrintEngine::PPK_PageMargins).toList());
-    *left = margins.at(0).toReal() / multiplier;
-    *top = margins.at(1).toReal() / multiplier;
-    *right = margins.at(2).toReal() / multiplier;
-    *bottom = margins.at(3).toReal() / multiplier;
-}
-
-/*!
-    \internal
-
-    Returns the metric for the given \a id.
-*/
-int QPrinter::metric(PaintDeviceMetric id) const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->metric(id);
-}
-
-/*!
-    Returns the paint engine used by the printer.
-*/
-QPaintEngine *QPrinter::paintEngine() const
-{
-    Q_D(const QPrinter);
-    return d->paintEngine;
-}
-
-/*!
-    \since 4.1
-
-    Returns the print engine used by the printer.
-*/
-QPrintEngine *QPrinter::printEngine() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine;
-}
-
-#if defined (Q_WS_WIN)
-/*!
-    Sets the page size to be used by the printer under Windows to \a
-    pageSize.
-
-    \warning This function is not portable so you may prefer to use
-    setPaperSize() instead.
-
-    \sa winPageSize()
-*/
-void QPrinter::setWinPageSize(int pageSize)
-{
-    Q_D(QPrinter);
-    ABORT_IF_ACTIVE("QPrinter::setWinPageSize");
-    d->printEngine->setProperty(QPrintEngine::PPK_WindowsPageSize, pageSize);
-    d->addToManualSetList(QPrintEngine::PPK_WindowsPageSize);
-}
-
-/*!
-    Returns the page size used by the printer under Windows.
-
-    \warning This function is not portable so you may prefer to use
-    paperSize() instead.
-
-    \sa setWinPageSize()
-*/
-int QPrinter::winPageSize() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->property(QPrintEngine::PPK_WindowsPageSize).toInt();
-}
-#endif // Q_WS_WIN
-
-/*!
-    Returns a list of the resolutions (a list of dots-per-inch
-    integers) that the printer says it supports.
-
-    For X11 where all printing is directly to PDF, this
-    function will always return a one item list containing only the
-    PDF resolution, i.e., 72 (72 dpi -- but see PrinterMode).
-*/
-QList<int> QPrinter::supportedResolutions() const
-{
-    Q_D(const QPrinter);
-    QList<QVariant> varlist
-        = d->printEngine->property(QPrintEngine::PPK_SupportedResolutions).toList();
-    QList<int> intlist;
-    for (int i=0; i<varlist.size(); ++i)
-        intlist << varlist.at(i).toInt();
-    return intlist;
-}
-
-/*!
-    Tells the printer to eject the current page and to continue
-    printing on a new page. Returns true if this was successful;
-    otherwise returns false.
-
-    Calling newPage() on an inactive QPrinter object will always
-    fail.
-*/
-bool QPrinter::newPage()
-{
-    Q_D(QPrinter);
-    if (d->printEngine->printerState() != QPrinter::Active)
-        return false;
-    return d->printEngine->newPage();
-}
-
-/*!
-    Aborts the current print run. Returns true if the print run was
-    successfully aborted and printerState() will return QPrinter::Aborted; otherwise
-    returns false.
-
-    It is not always possible to abort a print job. For example,
-    all the data has gone to the printer but the printer cannot or
-    will not cancel the job when asked to.
-*/
-bool QPrinter::abort()
-{
-    Q_D(QPrinter);
-    return d->printEngine->abort();
-}
-
-/*!
-    Returns the current state of the printer. This may not always be
-    accurate (for example if the printer doesn't have the capability
-    of reporting its state to the operating system).
-*/
-QPrinter::PrinterState QPrinter::printerState() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->printerState();
-}
-
-
-/*! \fn void QPrinter::margins(uint *top, uint *left, uint *bottom, uint *right) const
-
-    Sets *\a top, *\a left, *\a bottom, *\a right to be the top,
-    left, bottom, and right margins.
-
-    This function has been superseded by paperRect() and pageRect().
-    Use paperRect().top() - pageRect().top() for the top margin,
-    paperRect().left() - pageRect().left() for the left margin,
-    paperRect().bottom() - pageRect().bottom() for the bottom margin,
-    and papaerRect().right() - pageRect().right() for the right
-    margin.
-
-    \oldcode
-        uint rightMargin;
-        uint bottomMargin;
-        printer->margins(0, 0, &bottomMargin, &rightMargin);
-    \newcode
-        int rightMargin = printer->paperRect().right() - printer->pageRect().right();
-        int bottomMargin = printer->paperRect().bottom() - printer->pageRect().bottom();
-    \endcode
-*/
-
-/*! \fn QSize QPrinter::margins() const
-
-    \overload
-
-    Returns a QSize containing the left margin and the top margin.
-
-    This function has been superseded by paperRect() and pageRect().
-    Use paperRect().left() - pageRect().left() for the left margin,
-    and paperRect().top() - pageRect().top() for the top margin.
-
-    \oldcode
-        QSize margins = printer->margins();
-        int leftMargin = margins.width();
-        int topMargin = margins.height();
-    \newcode
-        int leftMargin = printer->paperRect().left() - printer->pageRect().left();
-        int topMargin = printer->paperRect().top() - printer->pageRect().top();
-    \endcode
-*/
-
-/*! \fn bool QPrinter::aborted()
-
-    Use printerState() == QPrinter::Aborted instead.
-*/
-
-#ifdef Q_WS_WIN
-/*!
-    \internal
-*/
-HDC QPrinter::getDC() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->getPrinterDC();
-}
-
-/*!
-    \internal
-*/
-void QPrinter::releaseDC(HDC hdc) const
-{
-    Q_D(const QPrinter);
-    d->printEngine->releasePrinterDC(hdc);
-}
-
-/*!
-    Returns the supported paper sizes for this printer.
-
-    The values will be either a value that matches an entry in the
-    QPrinter::PaperSource enum or a driver spesific value. The driver
-    spesific values are greater than the constant DMBIN_USER declared
-    in wingdi.h.
-
-    \warning This function is only available in windows.
-*/
-
-QList<QPrinter::PaperSource> QPrinter::supportedPaperSources() const
-{
-    Q_D(const QPrinter);
-    QVariant v = d->printEngine->property(QPrintEngine::PPK_PaperSources);
-
-    QList<QVariant> variant_list = v.toList();
-    QList<QPrinter::PaperSource> int_list;
-    for (int i=0; i<variant_list.size(); ++i)
-        int_list << (QPrinter::PaperSource) variant_list.at(i).toInt();
-
-    return int_list;
-}
-
-#endif
-
-/*!
-    \fn QString QPrinter::printerSelectionOption() const
-
-    Returns the printer options selection string. This is useful only
-    if the print command has been explicitly set.
-
-    The default value (an empty string) implies that the printer should
-    be selected in a system-dependent manner.
-
-    Any other value implies that the given value should be used.
-
-    \warning This function is not available on Windows.
-
-    \sa setPrinterSelectionOption()
-*/
-
-/*!
-    \fn void QPrinter::setPrinterSelectionOption(const QString &option)
-
-    Sets the printer to use \a option to select the printer. \a option
-    is null by default (which implies that Qt should be smart enough
-    to guess correctly), but it can be set to other values to use a
-    specific printer selection option.
-
-    If the printer selection option is changed while the printer is
-    active, the current print job may or may not be affected.
-
-    \warning This function is not available on Windows.
-
-    \sa printerSelectionOption()
-*/
-
-#ifndef Q_WS_WIN
-QString QPrinter::printerSelectionOption() const
-{
-    Q_D(const QPrinter);
-    return d->printEngine->property(QPrintEngine::PPK_SelectionOption).toString();
-}
-
-void QPrinter::setPrinterSelectionOption(const QString &option)
-{
-    Q_D(QPrinter);
-    d->printEngine->setProperty(QPrintEngine::PPK_SelectionOption, option);
-    d->addToManualSetList(QPrintEngine::PPK_SelectionOption);
-}
-#endif
-
-/*!
-    \since 4.1
-    \fn int QPrinter::fromPage() const
-
-    Returns the number of the first page in a range of pages to be printed
-    (the "from page" setting). Pages in a document are numbered according to
-    the convention that the first page is page 1.
-
-    By default, this function returns a special value of 0, meaning that
-    the "from page" setting is unset.
-
-    \note If fromPage() and toPage() both return 0, this indicates that
-    \e{the whole document will be printed}.
-
-    \sa setFromTo(), toPage()
-*/
-
-int QPrinter::fromPage() const
-{
-    Q_D(const QPrinter);
-    return d->fromPage;
-}
-
-/*!
-    \since 4.1
-
-    Returns the number of the last page in a range of pages to be printed
-    (the "to page" setting). Pages in a document are numbered according to
-    the convention that the first page is page 1.
-
-    By default, this function returns a special value of 0, meaning that
-    the "to page" setting is unset.
-
-    \note If fromPage() and toPage() both return 0, this indicates that
-    \e{the whole document will be printed}.
-
-    The programmer is responsible for reading this setting and
-    printing accordingly.
-
-    \sa setFromTo(), fromPage()
-*/
-
-int QPrinter::toPage() const
-{
-    Q_D(const QPrinter);
-    return d->toPage;
-}
-
-/*!
-    \since 4.1
-
-    Sets the range of pages to be printed to cover the pages with numbers
-    specified by \a from and \a to, where \a from corresponds to the first
-    page in the range and \a to corresponds to the last.
-
-    \note Pages in a document are numbered according to the convention that
-    the first page is page 1. However, if \a from and \a to are both set to 0,
-    the \e{whole document will be printed}.
-
-    This function is mostly used to set a default value that the user can
-    override in the print dialog when you call setup().
-
-    \sa fromPage(), toPage()
-*/
-
-void QPrinter::setFromTo(int from, int to)
-{
-    Q_D(QPrinter);
-    if (from > to) {
-        qWarning() << "QPrinter::setFromTo: 'from' must be less than or equal to 'to'";
-        from = to;
-    }
-    d->fromPage = from;
-    d->toPage = to;
-
-    if (d->minPage == 0 && d->maxPage == 0) {
-        d->minPage = 1;
-        d->maxPage = to;
-    }
-}
-
-/*!
-    \since 4.1
-
-    Sets the print range option in to be \a range.
-*/
-void QPrinter::setPrintRange( PrintRange range )
-{
-    Q_D(QPrinter);
-    d->printRange = range;
-}
-
-/*!
-    \since 4.1
-
-    Returns the page range of the QPrinter. After the print setup
-    dialog has been opened, this function returns the value selected
-    by the user.
-
-    \sa setPrintRange()
-*/
-QPrinter::PrintRange QPrinter::printRange() const
-{
-    Q_D(const QPrinter);
-    return d->printRange;
-}
-
-
-/*!
-    \class QPrintEngine
-    \reentrant
-
-    \ingroup printing
-
-    \brief The QPrintEngine class defines an interface for how QPrinter
-    interacts with a given printing subsystem.
-
-    The common case when creating your own print engine is to derive from both
-    QPaintEngine and QPrintEngine. Various properties of a print engine are
-    given with property() and set with setProperty().
-
-    \sa QPaintEngine
-*/
-
-/*!
-    \enum QPrintEngine::PrintEnginePropertyKey
-
-    This enum is used to communicate properties between the print
-    engine and QPrinter. A property may or may not be supported by a
-    given print engine.
-
-    \value PPK_CollateCopies A boolean value indicating whether the
-    printout should be collated or not.
-
-    \value PPK_ColorMode Refers to QPrinter::ColorMode, either color or
-    monochrome.
-
-    \value PPK_Creator A string describing the document's creator.
-
-    \value PPK_Duplex A boolean value indicating whether both sides of
-    the printer paper should be used for the printout.
-
-    \value PPK_DocumentName A string describing the document name in
-    the spooler.
-
-    \value PPK_FontEmbedding A boolean value indicating whether data for
-    the document's fonts should be embedded in the data sent to the
-    printer.
-
-    \value PPK_FullPage A boolean describing if the printer should be
-    full page or not.
-
-    \value PPK_NumberOfCopies Obsolete. An integer specifying the number of
-    copies. Use PPK_CopyCount instead.
-
-    \value PPK_Orientation Specifies a QPrinter::Orientation value.
-
-    \value PPK_OutputFileName The output file name as a string. An
-    empty file name indicates that the printer should not print to a file.
-
-    \value PPK_PageOrder Specifies a QPrinter::PageOrder value.
-
-    \value PPK_PageRect A QRect specifying the page rectangle
-
-    \value PPK_PageSize Obsolete. Use PPK_PaperSize instead.
-
-    \value PPK_PaperRect A QRect specifying the paper rectangle.
-
-    \value PPK_PaperSource Specifies a QPrinter::PaperSource value.
-
-    \value PPK_PaperSources Specifies more than one QPrinter::PaperSource value.
-
-    \value PPK_PaperSize Specifies a QPrinter::PaperSize value.
-
-    \value PPK_PrinterName A string specifying the name of the printer.
-
-    \value PPK_PrinterProgram A string specifying the name of the
-    printer program used for printing,
-
-    \value PPK_Resolution An integer describing the dots per inch for
-    this printer.
-
-    \value PPK_SelectionOption
-
-    \value PPK_SupportedResolutions A list of integer QVariants
-    describing the set of supported resolutions that the printer has.
-
-    \value PPK_SuppressSystemPrintStatus Suppress the built-in dialog for showing
-    printing progress. As of 4.1 this only has effect on Mac OS X where, by default,
-    a status dialog is shown.
-
-    \value PPK_WindowsPageSize An integer specifying a DM_PAPER entry
-    on Windows.
-
-    \value PPK_CustomPaperSize A QSizeF specifying a custom paper size
-    in the QPrinter::Point unit.
-
-    \value PPK_PageMargins A QList<QVariant> containing the left, top,
-    right and bottom margin values.
-
-    \value PPK_CopyCount An integer specifying the number of copies to print.
-
-    \value PPK_SupportsMultipleCopies A boolean value indicating whether or not
-    the printer supports printing multiple copies in one job.
-
-    \value PPK_CustomBase Basis for extension.
-*/
-
-/*!
-    \fn QPrintEngine::~QPrintEngine()
-
-    Destroys the print engine.
-*/
-
-/*!
-    \fn void QPrintEngine::setProperty(PrintEnginePropertyKey key, const QVariant &value)
-
-    Sets the print engine's property specified by \a key to the given \a value.
-
-    \sa property()
-*/
-
-/*!
-    \fn void QPrintEngine::property(PrintEnginePropertyKey key) const
-
-    Returns the print engine's property specified by \a key.
-
-    \sa setProperty()
-*/
-
-/*!
-    \fn bool QPrintEngine::newPage()
-
-    Instructs the print engine to start a new page. Returns true if
-    the printer was able to create the new page; otherwise returns false.
-*/
-
-/*!
-    \fn bool QPrintEngine::abort()
-
-    Instructs the print engine to abort the printing process. Returns
-    true if successful; otherwise returns false.
-*/
-
-/*!
-    \fn int QPrintEngine::metric(QPaintDevice::PaintDeviceMetric id) const
-
-    Returns the metric for the given \a id.
-*/
-
-/*!
-    \fn QPrinter::PrinterState QPrintEngine::printerState() const
-
-    Returns the current state of the printer being used by the print engine.
-*/
-
-/*!
-    \fn HDC QPrintEngine::getPrinterDC() const
-    \internal
-*/
-
-/*!
-    \fn void QPrintEngine::releasePrinterDC(HDC) const
-    \internal
-*/
-
-/*
-    Returns the dimensions for the given paper size, \a size, in millimeters.
-*/
-QSizeF qt_paperSizeToQSizeF(QPrinter::PaperSize size)
-{
-    if (size == QPrinter::Custom) return QSizeF(0, 0);
-    return QSizeF(qt_paperSizes[size][0], qt_paperSizes[size][1]);
-}
-
-/*
-    Returns the PaperSize type that matches \a size, where \a size
-    is in millimeters.
-
-    Because dimensions may not always be completely accurate (for
-    example when converting between units), a particular PaperSize
-    will be returned if it matches within -1/+1 millimeters.
-*/
-QPrinter::PaperSize qSizeFTopaperSize(const QSizeF& size)
-{
-    for (int i = 0; i < static_cast<int>(QPrinter::NPaperSize); ++i) {
-        if (qt_paperSizes[i][0] >= size.width() - 1 &&
-                qt_paperSizes[i][0] <= size.width() + 1 &&
-                qt_paperSizes[i][1] >= size.height() - 1 &&
-                qt_paperSizes[i][1] <= size.height() + 1) {
-            return QPrinter::PaperSize(i);
-        }
-    }
-
-    return QPrinter::Custom;
-}
-
-QT_END_NAMESPACE
-
-#endif // QT_NO_PRINTER
diff --git a/src/gui/painting/qprinter.h b/src/gui/painting/qprinter.h
deleted file mode 100644
index d551489bb8..0000000000
--- a/src/gui/painting/qprinter.h
+++ /dev/null
@@ -1,283 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#ifndef QPRINTER_H
-#define QPRINTER_H
-
-#include <QtCore/qstring.h>
-#include <QtCore/qscopedpointer.h>
-#include <QtGui/qpaintdevice.h>
-
-QT_BEGIN_HEADER
-
-QT_BEGIN_NAMESPACE
-
-QT_MODULE(Gui)
-
-#ifndef QT_NO_PRINTER
-
-#if defined(B0)
-#undef B0 // Terminal hang-up.  We assume that you do not want that.
-#endif
-
-class QPrinterPrivate;
-class QPaintEngine;
-class QPrintEngine;
-class QPrinterInfo;
-
-class Q_GUI_EXPORT QPrinter : public QPaintDevice
-{
-    Q_DECLARE_PRIVATE(QPrinter)
-public:
-    enum PrinterMode { ScreenResolution, PrinterResolution, HighResolution };
-
-    explicit QPrinter(PrinterMode mode = ScreenResolution);
-    explicit QPrinter(const QPrinterInfo& printer, PrinterMode mode = ScreenResolution);
-    ~QPrinter();
-
-    int devType() const;
-
-    enum Orientation { Portrait, Landscape };
-
-#ifndef Q_QDOC
-    enum PageSize { A4, B5, Letter, Legal, Executive,
-                    A0, A1, A2, A3, A5, A6, A7, A8, A9, B0, B1,
-                    B10, B2, B3, B4, B6, B7, B8, B9, C5E, Comm10E,
-                    DLE, Folio, Ledger, Tabloid, Custom, NPageSize = Custom, NPaperSize = Custom };
-    typedef PageSize PaperSize;
-#else
-    enum PageSize { A4, B5, Letter, Legal, Executive,
-                    A0, A1, A2, A3, A5, A6, A7, A8, A9, B0, B1,
-                    B10, B2, B3, B4, B6, B7, B8, B9, C5E, Comm10E,
-                    DLE, Folio, Ledger, Tabloid, Custom, NPageSize = Custom };
-    enum PaperSize { A4, B5, Letter, Legal, Executive,
-                     A0, A1, A2, A3, A5, A6, A7, A8, A9, B0, B1,
-                     B10, B2, B3, B4, B6, B7, B8, B9, C5E, Comm10E,
-                     DLE, Folio, Ledger, Tabloid, Custom, NPageSize = Custom, NPaperSize = Custom };
-#endif
-
-    enum PageOrder   { FirstPageFirst,
-                       LastPageFirst };
-
-    enum ColorMode   { GrayScale,
-                       Color };
-
-    enum PaperSource { OnlyOne,
-                       Lower,
-                       Middle,
-                       Manual,
-                       Envelope,
-                       EnvelopeManual,
-                       Auto,
-                       Tractor,
-                       SmallFormat,
-                       LargeFormat,
-                       LargeCapacity,
-                       Cassette,
-                       FormSource,
-                       MaxPageSource
-    };
-
-    enum PrinterState { Idle,
-                        Active,
-                        Aborted,
-                        Error };
-
-    enum OutputFormat { NativeFormat, PdfFormat };
-
-    // Keep in sync with QAbstractPrintDialog::PrintRange
-    enum PrintRange { AllPages, Selection, PageRange, CurrentPage };
-
-    enum Unit {
-        Millimeter,
-        Point,
-        Inch,
-        Pica,
-        Didot,
-        Cicero,
-        DevicePixel
-    };
-
-    enum DuplexMode {
-        DuplexNone = 0,
-        DuplexAuto,
-        DuplexLongSide,
-        DuplexShortSide
-    };
-
-    void setOutputFormat(OutputFormat format);
-    OutputFormat outputFormat() const;
-
-    void setPrinterName(const QString &);
-    QString printerName() const;
-
-    bool isValid() const;
-
-    void setOutputFileName(const QString &);
-    QString outputFileName()const;
-
-    void setPrintProgram(const QString &);
-    QString printProgram() const;
-
-    void setDocName(const QString &);
-    QString docName() const;
-
-    void setCreator(const QString &);
-    QString creator() const;
-
-    void setOrientation(Orientation);
-    Orientation orientation() const;
-
-    void setPageSize(PageSize);
-    PageSize pageSize() const;
-
-    void setPaperSize(PaperSize);
-    PaperSize paperSize() const;
-
-    void setPaperSize(const QSizeF &paperSize, Unit unit);
-    QSizeF paperSize(Unit unit) const;
-
-    void setPageOrder(PageOrder);
-    PageOrder pageOrder() const;
-
-    void setResolution(int);
-    int resolution() const;
-
-    void setColorMode(ColorMode);
-    ColorMode colorMode() const;
-
-    void setCollateCopies(bool collate);
-    bool collateCopies() const;
-
-    void setFullPage(bool);
-    bool fullPage() const;
-
-    void setNumCopies(int);
-    int numCopies() const;
-
-    int actualNumCopies() const;
-
-    void setCopyCount(int);
-    int copyCount() const;
-    bool supportsMultipleCopies() const;
-
-    void setPaperSource(PaperSource);
-    PaperSource paperSource() const;
-
-    void setDuplex(DuplexMode duplex);
-    DuplexMode duplex() const;
-
-    QList<int> supportedResolutions() const;
-
-#ifdef Q_WS_WIN
-    QList<PaperSource> supportedPaperSources() const;
-#endif
-
-    void setFontEmbeddingEnabled(bool enable);
-    bool fontEmbeddingEnabled() const;
-
-    void setDoubleSidedPrinting(bool enable);
-    bool doubleSidedPrinting() const;
-
-#ifdef Q_WS_WIN
-    void setWinPageSize(int winPageSize);
-    int winPageSize() const;
-#endif
-
-    QRect paperRect() const;
-    QRect pageRect() const;
-    QRectF paperRect(Unit) const;
-    QRectF pageRect(Unit) const;
-
-#if !defined(Q_WS_WIN) || defined(qdoc)
-    QString printerSelectionOption() const;
-    void setPrinterSelectionOption(const QString &);
-#endif
-
-    bool newPage();
-    bool abort();
-
-    PrinterState printerState() const;
-
-    QPaintEngine *paintEngine() const;
-    QPrintEngine *printEngine() const;
-
-#ifdef Q_WS_WIN
-    HDC getDC() const;
-    void releaseDC(HDC hdc) const;
-#endif
-
-    void setFromTo(int fromPage, int toPage);
-    int fromPage() const;
-    int toPage() const;
-
-    void setPrintRange(PrintRange range);
-    PrintRange printRange() const;
-
-    void setPageMargins(qreal left, qreal top, qreal right, qreal bottom, Unit unit);
-    void getPageMargins(qreal *left, qreal *top, qreal *right, qreal *bottom, Unit unit) const;
-
-protected:
-    int metric(PaintDeviceMetric) const;
-    void setEngines(QPrintEngine *printEngine, QPaintEngine *paintEngine);
-
-private:
-    void init(PrinterMode mode);
-
-    Q_DISABLE_COPY(QPrinter)
-
-    QScopedPointer<QPrinterPrivate> d_ptr;
-
-    friend class QPrintDialogPrivate;
-    friend class QAbstractPrintDialog;
-    friend class QAbstractPrintDialogPrivate;
-    friend class QPrintPreviewWidgetPrivate;
-    friend class QTextDocument;
-    friend class QPageSetupWidget;
-};
-
-#endif // QT_NO_PRINTER
-
-QT_END_NAMESPACE
-
-QT_END_HEADER
-
-#endif // QPRINTER_H
diff --git a/src/gui/painting/qprinter_p.h b/src/gui/painting/qprinter_p.h
deleted file mode 100644
index 2ba0f0dbb8..0000000000
--- a/src/gui/painting/qprinter_p.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#ifndef QPRINTER_P_H
-#define QPRINTER_P_H
-
-//
-//  W A R N I N G
-//  -------------
-//
-// This file is not part of the Qt API.  It exists purely as an
-// implementation detail.  This header file may change from version to
-// version without notice, or even be removed.
-//
-// We mean it.
-//
-
-
-#include "QtCore/qglobal.h"
-
-#ifndef QT_NO_PRINTER
-
-#include "QtGui/qprinter.h"
-#include "QtGui/qprintengine.h"
-#include "QtCore/qpointer.h"
-
-#include <limits.h>
-
-QT_BEGIN_NAMESPACE
-
-class QPrintEngine;
-class QPreviewPaintEngine;
-class QPicture;
-
-class Q_GUI_EXPORT QPrinterPrivate
-{
-    Q_DECLARE_PUBLIC(QPrinter)
-public:
-    QPrinterPrivate(QPrinter *printer)
-        : printEngine(0)
-        , paintEngine(0)
-        , q_ptr(printer)
-        , printRange(QPrinter::AllPages)
-        , minPage(1)
-        , maxPage(INT_MAX)
-        , fromPage(0)
-        , toPage(0)
-        , use_default_engine(true)
-        , validPrinter(false)
-        , hasCustomPageMargins(false)
-        , hasUserSetPageSize(false)
-    {
-    }
-
-    ~QPrinterPrivate() {
-
-    }
-
-    void createDefaultEngines();
-#ifndef QT_NO_PRINTPREVIEWWIDGET
-    QList<const QPicture *> previewPages() const;
-    void setPreviewMode(bool);
-#endif
-
-    void addToManualSetList(QPrintEngine::PrintEnginePropertyKey key);
-
-    QPrinter::PrinterMode printerMode;
-    QPrinter::OutputFormat outputFormat;
-    QPrintEngine *printEngine;
-    QPaintEngine *paintEngine;
-
-    QPrintEngine *realPrintEngine;
-    QPaintEngine *realPaintEngine;
-#ifndef QT_NO_PRINTPREVIEWWIDGET
-    QPreviewPaintEngine *previewEngine;
-#endif
-
-    QPrinter *q_ptr;
-
-    QPrinter::PrintRange printRange;
-    int minPage, maxPage, fromPage, toPage;
-
-    uint use_default_engine : 1;
-    uint had_default_engines : 1;
-
-    uint validPrinter : 1;
-    uint hasCustomPageMargins : 1;
-    uint hasUserSetPageSize : 1;
-
-    // Used to remember which properties have been manually set by the user.
-    QList<QPrintEngine::PrintEnginePropertyKey> manualSetList;
-};
-
-QT_END_NAMESPACE
-
-#endif // QT_NO_PRINTER
-
-#endif // QPRINTER_P_H
diff --git a/src/gui/painting/qprinterinfo.cpp b/src/gui/painting/qprinterinfo.cpp
deleted file mode 100644
index 0049bd248a..0000000000
--- a/src/gui/painting/qprinterinfo.cpp
+++ /dev/null
@@ -1,199 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the documentation of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:FDL$
-** GNU Free Documentation License
-** Alternatively, this file may be used under the terms of the GNU Free
-** Documentation License version 1.3 as published by the Free Software
-** Foundation and appearing in the file included in the packaging of
-** this file.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms
-** and conditions contained in a signed written agreement between you
-** and Nokia.
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include "qprinterinfo.h"
-#include "qprinterinfo_p.h"
-
-#ifndef QT_NO_PRINTER
-
-#include <private/qguiapplication_p.h>
-#include <QtGui/QPlatformPrinterSupport>
-
-QT_BEGIN_NAMESPACE
-
-QPrinterInfoPrivate QPrinterInfoPrivate::shared_null;
-
-
-/*!
-    \class QPrinterInfo
-
-    \brief The QPrinterInfo class gives access to information about
-    existing printers.
-    
-    \ingroup printing
-
-    Use the static functions to generate a list of QPrinterInfo
-    objects. Each QPrinterInfo object in the list represents a single
-    printer and can be queried for name, supported paper sizes, and
-    whether or not it is the default printer.
-
-    \since 4.4
-*/
-
-/*!
-    \fn QList<QPrinterInfo> QPrinterInfo::availablePrinters()
-
-    Returns a list of available printers on the system.
-*/
-
-/*!
-    \fn QPrinterInfo QPrinterInfo::defaultPrinter()
-
-    Returns the default printer on the system.
-
-    The return value should be checked using isNull() before being
-    used, in case there is no default printer.
-
-    \sa isNull()
-*/
-
-/*!
-    Constructs an empty QPrinterInfo object.
-
-    \sa isNull()
-*/
-QPrinterInfo::QPrinterInfo()
-    : d_ptr(&QPrinterInfoPrivate::shared_null)
-{
-}
-
-/*!
-    Constructs a copy of \a other.
-*/
-QPrinterInfo::QPrinterInfo(const QPrinterInfo &other)
-    : d_ptr(new QPrinterInfoPrivate(*other.d_ptr))
-{
-}
-
-/*!
-    Constructs a QPrinterInfo object from \a printer.
-*/
-QPrinterInfo::QPrinterInfo(const QPrinter &printer)
-    : d_ptr(&QPrinterInfoPrivate::shared_null)
-{
-    foreach (const QPrinterInfo &printerInfo, availablePrinters()) {
-        if (printerInfo.printerName() == printer.printerName()) {
-            d_ptr.reset(new QPrinterInfoPrivate(*printerInfo.d_ptr));
-            break;
-        }
-    }
-}
-
-/*!
-    \internal
-*/
-QPrinterInfo::QPrinterInfo(const QString &name)
-    : d_ptr(new QPrinterInfoPrivate(name))
-{
-}
-
-/*!
-    Destroys the QPrinterInfo object. References to the values in the
-    object become invalid.
-*/
-QPrinterInfo::~QPrinterInfo()
-{
-}
-
-/*!
-    Sets the QPrinterInfo object to be equal to \a other.
-*/
-QPrinterInfo &QPrinterInfo::operator=(const QPrinterInfo &other)
-{
-    Q_ASSERT(d_ptr);
-    d_ptr.reset(new QPrinterInfoPrivate(*other.d_ptr));
-    return *this;
-}
-
-/*!
-    Returns the name of the printer.
-
-    \sa QPrinter::setPrinterName()
-*/
-QString QPrinterInfo::printerName() const
-{
-    const Q_D(QPrinterInfo);
-    return d->name;
-}
-
-/*!
-    Returns whether this QPrinterInfo object holds a printer definition.
-
-    An empty QPrinterInfo object could result for example from calling
-    defaultPrinter() when there are no printers on the system.
-*/
-bool QPrinterInfo::isNull() const
-{
-    const Q_D(QPrinterInfo);
-    return d == &QPrinterInfoPrivate::shared_null;
-}
-
-/*!
-    Returns whether this printer is the default printer.
-*/
-bool QPrinterInfo::isDefault() const
-{
-    const Q_D(QPrinterInfo);
-    return d->isDefault;
-}
-
-/*!
-    \fn QList< QPrinter::PaperSize> QPrinterInfo::supportedPaperSizes() const
-    \since 4.4
-
-    Returns a list of supported paper sizes by the printer.
-
-    Not all printer drivers support this query, so the list may be empty.
-    On Mac OS X 10.3, this function always returns an empty list.
-*/
-
-#ifdef Q_WS_QPA
-QList<QPrinter::PaperSize> QPrinterInfo::supportedPaperSizes() const
-{
-    const Q_D(QPrinterInfo);
-    if (!isNull() && !d->hasPaperSizes) {
-        d->paperSizes = QGuiApplicationPrivate::platformIntegration()->printerSupport()->supportedPaperSizes(*this);
-        d->hasPaperSizes = true;
-    }
-    return d->paperSizes;
-}
-
-QList<QPrinterInfo> QPrinterInfo::availablePrinters()
-{
-    return QGuiApplicationPrivate::platformIntegration()->printerSupport()->availablePrinters();
-}
-
-QPrinterInfo QPrinterInfo::defaultPrinter()
-{
-    return QGuiApplicationPrivate::platformIntegration()->printerSupport()->defaultPrinter();
-}
-
-#endif //Q_WS_QPA
-
-QT_END_NAMESPACE
-
-#endif // QT_NO_PRINTER
diff --git a/src/gui/painting/qprinterinfo.h b/src/gui/painting/qprinterinfo.h
deleted file mode 100644
index 72082cf299..0000000000
--- a/src/gui/painting/qprinterinfo.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#ifndef QPRINTERINFO_H
-#define QPRINTERINFO_H
-
-#include <QtCore/QList>
-
-#include <QtGui/QPrinter>
-
-QT_BEGIN_HEADER
-
-QT_BEGIN_NAMESPACE
-
-QT_MODULE(Gui)
-
-#ifndef QT_NO_PRINTER
-class QPrinterInfoPrivate;
-class QPrinterInfoPrivateDeleter;
-class Q_GUI_EXPORT QPrinterInfo
-{
-public:
-    QPrinterInfo();
-    QPrinterInfo(const QPrinterInfo &other);
-    QPrinterInfo(const QPrinter &printer);
-    ~QPrinterInfo();
-
-    QPrinterInfo &operator=(const QPrinterInfo &other);
-
-    QString printerName() const;
-    bool isNull() const;
-    bool isDefault() const;
-    QList<QPrinter::PaperSize> supportedPaperSizes() const;
-
-    static QList<QPrinterInfo> availablePrinters();
-    static QPrinterInfo defaultPrinter();
-
-private:
-    QPrinterInfo(const QString &name);
-
-private:
-    friend class QPlatformPrinterSupport;
-    Q_DECLARE_PRIVATE(QPrinterInfo)
-    QScopedPointer<QPrinterInfoPrivate, QPrinterInfoPrivateDeleter> d_ptr;
-};
-
-#endif // QT_NO_PRINTER
-
-QT_END_NAMESPACE
-
-QT_END_HEADER
-
-#endif // QPRINTERINFO_H
diff --git a/src/gui/painting/qprinterinfo_p.h b/src/gui/painting/qprinterinfo_p.h
deleted file mode 100644
index a3c654e7b7..0000000000
--- a/src/gui/painting/qprinterinfo_p.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#ifndef QPRINTERINFO_P_H
-#define QPRINTERINFO_P_H
-
-//
-//  W A R N I N G
-//  -------------
-//
-// This file is not part of the Qt API.  It exists purely as an
-// implementation detail.  This header file may change from version to
-// version without notice, or even be removed.
-//
-// We mean it.
-//
-
-#include "QtCore/qglobal.h"
-
-#ifndef QT_NO_PRINTER
-
-#include "QtCore/qlist.h"
-
-QT_BEGIN_NAMESPACE
-
-class QPrinterInfoPrivate
-{
-public:
-    QPrinterInfoPrivate(const QString& name = QString()) :
-        name(name), isDefault(false)
-#if (defined(Q_OS_UNIX) && !defined(Q_OS_MAC) && !defined(Q_OS_SYMBIAN)) || defined(Q_WS_QPA)
-#if !defined(QT_NO_CUPS) && !defined(QT_NO_LIBRARY)
-        , cupsPrinterIndex(0)
-#endif
-#endif
-        , hasPaperSizes(false)
-    {}
-    ~QPrinterInfoPrivate()
-    {}
-
-    static QPrinterInfoPrivate shared_null;
-
-    QString name;
-    bool isDefault;
-
-#if (defined(Q_OS_UNIX) && !defined(Q_OS_MAC) && !defined(Q_OS_SYMBIAN)) || defined(Q_WS_QPA)
-#if !defined(QT_NO_CUPS) && !defined(QT_NO_LIBRARY)
-    int cupsPrinterIndex;
-#endif
-#endif
-    mutable bool hasPaperSizes;
-    mutable QList<QPrinter::PaperSize> paperSizes;
-};
-
-
-class QPrinterInfoPrivateDeleter
-{
-public:
-    static inline void cleanup(QPrinterInfoPrivate *d)
-    {
-        if (d != &QPrinterInfoPrivate::shared_null)
-            delete d;
-    }
-};
-
-QT_END_NAMESPACE
-
-#endif // QT_NO_PRINTER
-
-#endif // QPRINTERINFO_P_H
diff --git a/src/gui/painting/qprinterinfo_unix.cpp b/src/gui/painting/qprinterinfo_unix.cpp
deleted file mode 100644
index 3c66481b4d..0000000000
--- a/src/gui/painting/qprinterinfo_unix.cpp
+++ /dev/null
@@ -1,857 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include "qprinterinfo.h"
-#include "qprinterinfo_p.h"
-
-#include <qfile.h>
-#include <qfileinfo.h>
-#include <qdir.h>
-#include <qlibrary.h>
-#include <qtextstream.h>
-#include <qcoreapplication.h>
-
-#if !defined(QT_NO_CUPS) && !defined(QT_NO_LIBRARY)
-#  include <private/qcups_p.h>
-#  include <cups/cups.h>
-#  include <private/qpdf_p.h>
-#endif
-
-#include <private/qprinterinfo_unix_p.h>
-
-QT_BEGIN_NAMESPACE
-
-#ifndef QT_NO_PRINTER
-
-#if !defined(QT_NO_CUPS) && !defined(QT_NO_LIBRARY)
-// preserver names in ascending order for the binary search
-static const struct NamedPaperSize {
-    const char *const name;
-    QPrinter::PaperSize size;
-} named_sizes_map[QPrinter::NPageSize] = {
-    { "A0", QPrinter::A0 },
-    { "A1", QPrinter::A1 },
-    { "A2", QPrinter::A2 },
-    { "A3", QPrinter::A3 },
-    { "A4", QPrinter::A4 },
-    { "A5", QPrinter::A5 },
-    { "A6", QPrinter::A6 },
-    { "A7", QPrinter::A7 },
-    { "A8", QPrinter::A8 },
-    { "A9", QPrinter::A9 },
-    { "B0", QPrinter::B0 },
-    { "B1", QPrinter::B1 },
-    { "B10", QPrinter::B10 },
-    { "B2", QPrinter::B2 },
-    { "B4", QPrinter::B4 },
-    { "B5", QPrinter::B5 },
-    { "B6", QPrinter::B6 },
-    { "B7", QPrinter::B7 },
-    { "B8", QPrinter::B8 },
-    { "B9", QPrinter::B9 },
-    { "C5E", QPrinter::C5E },
-    { "Comm10E", QPrinter::Comm10E },
-    { "Custom", QPrinter::Custom },
-    { "DLE", QPrinter::DLE },
-    { "Executive", QPrinter::Executive },
-    { "Folio", QPrinter::Folio },
-    { "Ledger", QPrinter::Ledger },
-    { "Legal", QPrinter::Legal },
-    { "Letter", QPrinter::Letter },
-    { "Tabloid", QPrinter::Tabloid }
-};
-
-inline bool operator<(const char *name, const NamedPaperSize &data)
-{ return qstrcmp(name, data.name) < 0; }
-inline bool operator<(const NamedPaperSize &data, const char *name)
-{ return qstrcmp(data.name, name) < 0; }
-
-static inline QPrinter::PaperSize string2PaperSize(const char *name)
-{
-    const NamedPaperSize *r = qBinaryFind(named_sizes_map, named_sizes_map + QPrinter::NPageSize, name);
-    if (r - named_sizes_map != QPrinter::NPageSize)
-        return r->size;
-    return QPrinter::Custom;
-}
-
-static inline const char *paperSize2String(QPrinter::PaperSize size)
-{
-    for (int i = 0; i < QPrinter::NPageSize; ++i) {
-        if (size == named_sizes_map[i].size)
-            return named_sizes_map[i].name;
-    }
-    return 0;
-}
-#endif
-
-void qt_perhapsAddPrinter(QList<QPrinterDescription> *printers, const QString &name,
-                               QString host, QString comment,
-                               QStringList aliases)
-{
-    for (int i = 0; i < printers->size(); ++i)
-        if (printers->at(i).samePrinter(name))
-            return;
-
-    if (host.isEmpty())
-        host = QCoreApplication::translate("QPrinter", "locally connected");
-    printers->append(QPrinterDescription(name.simplified(), host.simplified(), comment.simplified(), aliases));
-}
-
-void qt_parsePrinterDesc(QString printerDesc, QList<QPrinterDescription> *printers)
-{
-    if (printerDesc.length() < 1)
-        return;
-
-    printerDesc = printerDesc.simplified();
-    int i = printerDesc.indexOf(QLatin1Char(':'));
-    QString printerName, printerComment, printerHost;
-    QStringList aliases;
-
-    if (i >= 0) {
-        // have ':' want '|'
-        int j = printerDesc.indexOf(QLatin1Char('|'));
-        if (j > 0 && j < i) {
-            printerName = printerDesc.left(j);
-            aliases = printerDesc.mid(j + 1, i - j - 1).split(QLatin1Char('|'));
-            // try extracting a comment from the aliases
-            printerComment = QCoreApplication::translate("QPrinter", "Aliases: %1")
-                             .arg(aliases.join(QLatin1String(", ")));
-        } else {
-            printerName = printerDesc.left(i);
-        }
-        // look for lprng pseudo all printers entry
-        i = printerDesc.indexOf(QRegExp(QLatin1String(": *all *=")));
-        if (i >= 0)
-            printerName = QString();
-        // look for signs of this being a remote printer
-        i = printerDesc.indexOf(QRegExp(QLatin1String(": *rm *=")));
-        if (i >= 0) {
-            // point k at the end of remote host name
-            while (printerDesc[i] != QLatin1Char('='))
-                i++;
-            while (printerDesc[i] == QLatin1Char('=') || printerDesc[i].isSpace())
-                i++;
-            j = i;
-            while (j < (int)printerDesc.length() && printerDesc[j] != QLatin1Char(':'))
-                j++;
-
-            // and stuff that into the string
-            printerHost = printerDesc.mid(i, j - i);
-        }
-    }
-    if (printerName.length())
-        qt_perhapsAddPrinter(printers, printerName, printerHost, printerComment,
-                             aliases);
-}
-
-int qt_parsePrintcap(QList<QPrinterDescription> *printers, const QString& fileName)
-{
-    QFile printcap(fileName);
-    if (!printcap.open(QIODevice::ReadOnly))
-        return NotFound;
-
-    char *line_ascii = new char[1025];
-    line_ascii[1024] = '\0';
-
-    QString printerDesc;
-    bool atEnd = false;
-
-    while (!atEnd) {
-        if (printcap.atEnd() || printcap.readLine(line_ascii, 1024) <= 0)
-            atEnd = true;
-        QString line = QString::fromLocal8Bit(line_ascii);
-        line = line.trimmed();
-        if (line.length() >= 1 && line[int(line.length()) - 1] == QLatin1Char('\\'))
-            line.chop(1);
-        if (line[0] == QLatin1Char('#')) {
-            if (!atEnd)
-                continue;
-        } else if (line[0] == QLatin1Char('|') || line[0] == QLatin1Char(':')
-                || line.isEmpty()) {
-            printerDesc += line;
-            if (!atEnd)
-                continue;
-        }
-
-        qt_parsePrinterDesc(printerDesc, printers);
-
-        // add the first line of the new printer definition
-        printerDesc = line;
-    }
-    delete[] line_ascii;
-    return Success;
-}
-
-/*!
-  \internal
-
-  Checks $HOME/.printers for a line matching '_default <name>' (where
-  <name> does not contain any white space). The first such match
-  results in <name> being returned.
-  If no lines match then an empty string is returned.
-*/
-QString qt_getDefaultFromHomePrinters()
-{
-    QFile file(QDir::homePath() + QLatin1String("/.printers"));
-    if (!file.open(QIODevice::ReadOnly))
-        return QString();
-    QString all(QLatin1String(file.readAll()));
-    QStringList words = all.split(QRegExp(QLatin1String("\\W+")), QString::SkipEmptyParts);
-    const int i = words.indexOf(QLatin1String("_default"));
-    if (i != -1 && i < words.size() - 1)
-        return words.at(i + 1);
-    return QString();
-}
-
-// solaris, not 2.6
-void qt_parseEtcLpPrinters(QList<QPrinterDescription> *printers)
-{
-    QDir lp(QLatin1String("/etc/lp/printers"));
-    QFileInfoList dirs = lp.entryInfoList();
-    if (dirs.isEmpty())
-        return;
-
-    QString tmp;
-    for (int i = 0; i < dirs.size(); ++i) {
-        QFileInfo printer = dirs.at(i);
-        if (printer.isDir()) {
-            tmp.sprintf("/etc/lp/printers/%s/configuration",
-                         printer.fileName().toAscii().data());
-            QFile configuration(tmp);
-            char *line = new char[1025];
-            QString remote(QLatin1String("Remote:"));
-            QString contentType(QLatin1String("Content types:"));
-            QString printerHost;
-            bool canPrintPostscript = false;
-            if (configuration.open(QIODevice::ReadOnly)) {
-                while (!configuration.atEnd() &&
-                        configuration.readLine(line, 1024) > 0) {
-                    if (QString::fromLatin1(line).startsWith(remote)) {
-                        const char *p = line;
-                        while (*p != ':')
-                            p++;
-                        p++;
-                        while (isspace((uchar) *p))
-                            p++;
-                        printerHost = QString::fromLocal8Bit(p);
-                        printerHost = printerHost.simplified();
-                    } else if (QString::fromLatin1(line).startsWith(contentType)) {
-                        char *p = line;
-                        while (*p != ':')
-                            p++;
-                        p++;
-                        char *e;
-                        while (*p) {
-                            while (isspace((uchar) *p))
-                                p++;
-                            if (*p) {
-                                char s;
-                                e = p;
-                                while (isalnum((uchar) *e))
-                                    e++;
-                                s = *e;
-                                *e = '\0';
-                                if (!qstrcmp(p, "postscript") ||
-                                     !qstrcmp(p, "any"))
-                                    canPrintPostscript = true;
-                                *e = s;
-                                if (s == ',')
-                                    e++;
-                                p = e;
-                            }
-                        }
-                    }
-                }
-                if (canPrintPostscript)
-                    qt_perhapsAddPrinter(printers, printer.fileName(),
-                                         printerHost, QLatin1String(""));
-            }
-            delete[] line;
-        }
-    }
-}
-
-// solaris 2.6
-char *qt_parsePrintersConf(QList<QPrinterDescription> *printers, bool *found)
-{
-    QFile pc(QLatin1String("/etc/printers.conf"));
-    if (!pc.open(QIODevice::ReadOnly)) {
-        if (found)
-            *found = false;
-        return 0;
-    }
-    if (found)
-        *found = true;
-
-    char *line = new char[1025];
-    line[1024] = '\0';
-
-    QString printerDesc;
-    int lineLength = 0;
-
-    char *defaultPrinter = 0;
-
-    while (!pc.atEnd() &&
-            (lineLength=pc.readLine(line, 1024)) > 0) {
-        if (*line == '#') {
-            *line = '\0';
-            lineLength = 0;
-        }
-        if (lineLength >= 2 && line[lineLength-2] == '\\') {
-            line[lineLength-2] = '\0';
-            printerDesc += QString::fromLocal8Bit(line);
-        } else {
-            printerDesc += QString::fromLocal8Bit(line);
-            printerDesc = printerDesc.simplified();
-            int i = printerDesc.indexOf(QLatin1Char(':'));
-            QString printerName, printerHost, printerComment;
-            QStringList aliases;
-            if (i >= 0) {
-                // have : want |
-                int j = printerDesc.indexOf(QLatin1Char('|'));
-                if (j >= i)
-                    j = -1;
-                printerName = printerDesc.mid(0, j < 0 ? i : j);
-                if (printerName == QLatin1String("_default")) {
-                    i = printerDesc.indexOf(
-                        QRegExp(QLatin1String(": *use *=")));
-                    while (printerDesc[i] != QLatin1Char('='))
-                        i++;
-                    while (printerDesc[i] == QLatin1Char('=') || printerDesc[i].isSpace())
-                        i++;
-                    j = i;
-                    while (j < (int)printerDesc.length() &&
-                            printerDesc[j] != QLatin1Char(':') && printerDesc[j] != QLatin1Char(','))
-                        j++;
-                    // that's our default printer
-                    defaultPrinter =
-                        qstrdup(printerDesc.mid(i, j-i).toAscii().data());
-                    printerName = QString();
-                    printerDesc = QString();
-                } else if (printerName == QLatin1String("_all")) {
-                    // skip it.. any other cases we want to skip?
-                    printerName = QString();
-                    printerDesc = QString();
-                }
-
-                if (j > 0) {
-                    // try extracting a comment from the aliases
-                    aliases = printerDesc.mid(j + 1, i - j - 1).split(QLatin1Char('|'));
-                    printerComment = QCoreApplication::translate("QPrinter", "Aliases: %1")
-                                     .arg(aliases.join(QLatin1String(", ")));
-                }
-                // look for signs of this being a remote printer
-                i = printerDesc.indexOf(
-                    QRegExp(QLatin1String(": *bsdaddr *=")));
-                if (i >= 0) {
-                    // point k at the end of remote host name
-                    while (printerDesc[i] != QLatin1Char('='))
-                        i++;
-                    while (printerDesc[i] == QLatin1Char('=') || printerDesc[i].isSpace())
-                        i++;
-                    j = i;
-                    while (j < (int)printerDesc.length() &&
-                            printerDesc[j] != QLatin1Char(':') && printerDesc[j] != QLatin1Char(','))
-                        j++;
-                    // and stuff that into the string
-                    printerHost = printerDesc.mid(i, j-i);
-                    // maybe stick the remote printer name into the comment
-                    if (printerDesc[j] == QLatin1Char(',')) {
-                        i = ++j;
-                        while (printerDesc[i].isSpace())
-                            i++;
-                        j = i;
-                        while (j < (int)printerDesc.length() &&
-                                printerDesc[j] != QLatin1Char(':') && printerDesc[j] != QLatin1Char(','))
-                            j++;
-                        if (printerName != printerDesc.mid(i, j-i)) {
-                            printerComment =
-                                QLatin1String("Remote name: ");
-                            printerComment += printerDesc.mid(i, j-i);
-                        }
-                    }
-                }
-            }
-            if (printerComment == QLatin1String(":"))
-                printerComment = QString(); // for cups
-            if (printerName.length())
-                qt_perhapsAddPrinter(printers, printerName, printerHost,
-                                     printerComment, aliases);
-            // chop away the line, for processing the next one
-            printerDesc = QString();
-        }
-    }
-    delete[] line;
-    return defaultPrinter;
-}
-
-#ifndef QT_NO_NIS
-
-#if defined(Q_C_CALLBACKS)
-extern "C" {
-#endif
-
-int qt_pd_foreach(int /*status */, char * /*key */, int /*keyLen */,
-                    char *val, int valLen, char *data)
-{
-    qt_parsePrinterDesc(QString::fromLatin1(val, valLen), (QList<QPrinterDescription> *)data);
-    return 0;
-}
-
-#if defined(Q_C_CALLBACKS)
-}
-#endif
-
-int qt_retrieveNisPrinters(QList<QPrinterDescription> *printers)
-{
-#ifndef QT_NO_LIBRARY
-    typedef int (*WildCast)(int, char *, int, char *, int, char *);
-    char printersConfByname[] = "printers.conf.byname";
-    char *domain;
-    int err;
-
-    QLibrary lib(QLatin1String("nsl"));
-    typedef int (*ypGetDefaultDomain)(char **);
-    ypGetDefaultDomain _ypGetDefaultDomain = (ypGetDefaultDomain)lib.resolve("yp_get_default_domain");
-    typedef int (*ypAll)(const char *, const char *, const struct ypall_callback *);
-    ypAll _ypAll = (ypAll)lib.resolve("yp_all");
-
-    if (_ypGetDefaultDomain && _ypAll) {
-        err = _ypGetDefaultDomain(&domain);
-        if (err == 0) {
-            ypall_callback cb;
-            // wild cast to support K&R-style system headers
-            (WildCast &) cb.foreach = (WildCast) qt_pd_foreach;
-            cb.data = (char *) printers;
-            err = _ypAll(domain, printersConfByname, &cb);
-        }
-        if (!err)
-            return Success;
-    }
-#endif //QT_NO_LIBRARY
-    return Unavail;
-}
-
-#endif // QT_NO_NIS
-
-char *qt_parseNsswitchPrintersEntry(QList<QPrinterDescription> *printers, char *line)
-{
-#define skipSpaces() \
-    while (line[k] != '\0' && isspace((uchar) line[k])) \
-        k++
-
-    char *defaultPrinter = 0;
-    bool stop = false;
-    int lastStatus = NotFound;
-
-    int k = 8;
-    skipSpaces();
-    if (line[k] != ':')
-        return 0;
-    k++;
-
-    char *cp = strchr(line, '#');
-    if (cp != 0)
-        *cp = '\0';
-
-    while (line[k] != '\0') {
-        if (isspace((uchar) line[k])) {
-            k++;
-        } else if (line[k] == '[') {
-            k++;
-            skipSpaces();
-            while (line[k] != '\0') {
-                char status = tolower(line[k]);
-                char action = '?';
-
-                while (line[k] != '=' && line[k] != ']' && line[k] != '\0')
-                    k++;
-                if (line[k] == '=') {
-                    k++;
-                    skipSpaces();
-                    action = tolower(line[k]);
-                    while (line[k] != '\0' && !isspace((uchar) line[k]) && line[k] != ']')
-                        k++;
-                } else if (line[k] == ']') {
-                    k++;
-                    break;
-                }
-                skipSpaces();
-
-                if (lastStatus == status)
-                    stop = (action == (char) Return);
-            }
-        } else {
-            if (stop)
-                break;
-
-            QByteArray source;
-            while (line[k] != '\0' && !isspace((uchar) line[k]) && line[k] != '[') {
-                source += line[k];
-                k++;
-            }
-
-            if (source == "user") {
-                lastStatus = qt_parsePrintcap(printers,
-                        QDir::homePath() + QLatin1String("/.printers"));
-            } else if (source == "files") {
-                bool found;
-                defaultPrinter = qt_parsePrintersConf(printers, &found);
-                if (found)
-                    lastStatus = Success;
-#ifndef QT_NO_NIS
-            } else if (source == "nis") {
-                lastStatus = qt_retrieveNisPrinters(printers);
-#endif
-            } else {
-                // nisplus, dns, etc., are not implemented yet
-                lastStatus = NotFound;
-            }
-            stop = (lastStatus == Success);
-        }
-    }
-    return defaultPrinter;
-}
-
-char *qt_parseNsswitchConf(QList<QPrinterDescription> *printers)
-{
-    QFile nc(QLatin1String("/etc/nsswitch.conf"));
-    if (!nc.open(QIODevice::ReadOnly))
-        return 0;
-
-    char *defaultPrinter = 0;
-
-    char *line = new char[1025];
-    line[1024] = '\0';
-
-    while (!nc.atEnd() &&
-            nc.readLine(line, 1024) > 0) {
-        if (qstrncmp(line, "printers", 8) == 0) {
-            defaultPrinter = qt_parseNsswitchPrintersEntry(printers, line);
-            delete[] line;
-            return defaultPrinter;
-        }
-    }
-
-    strcpy(line, "printers: user files nis nisplus xfn");
-    defaultPrinter = qt_parseNsswitchPrintersEntry(printers, line);
-    delete[] line;
-    return defaultPrinter;
-}
-
-// HP-UX
-void qt_parseEtcLpMember(QList<QPrinterDescription> *printers)
-{
-    QDir lp(QLatin1String("/etc/lp/member"));
-    if (!lp.exists())
-        return;
-    QFileInfoList dirs = lp.entryInfoList();
-    if (dirs.isEmpty())
-        return;
-
-    QString tmp;
-    for (int i = 0; i < dirs.size(); ++i) {
-        QFileInfo printer = dirs.at(i);
-        // I haven't found any real documentation, so I'm guessing that
-        // since lpstat uses /etc/lp/member rather than one of the
-        // other directories, it's the one to use.  I did not find a
-        // decent way to locate aliases and remote printers.
-        if (printer.isFile())
-            qt_perhapsAddPrinter(printers, printer.fileName(),
-                                 QCoreApplication::translate("QPrinter", "unknown"),
-                                 QLatin1String(""));
-    }
-}
-
-// IRIX 6.x
-void qt_parseSpoolInterface(QList<QPrinterDescription> *printers)
-{
-    QDir lp(QLatin1String("/usr/spool/lp/interface"));
-    if (!lp.exists())
-        return;
-    QFileInfoList files = lp.entryInfoList();
-    if(files.isEmpty())
-        return;
-
-    for (int i = 0; i < files.size(); ++i) {
-        QFileInfo printer = files.at(i);
-
-        if (!printer.isFile())
-            continue;
-
-        // parse out some information
-        QFile configFile(printer.filePath());
-        if (!configFile.open(QIODevice::ReadOnly))
-            continue;
-
-        QByteArray line;
-        line.resize(1025);
-        QString namePrinter;
-        QString hostName;
-        QString hostPrinter;
-        QString printerType;
-
-        QString nameKey(QLatin1String("NAME="));
-        QString typeKey(QLatin1String("TYPE="));
-        QString hostKey(QLatin1String("HOSTNAME="));
-        QString hostPrinterKey(QLatin1String("HOSTPRINTER="));
-
-        while (!configFile.atEnd() &&
-                (configFile.readLine(line.data(), 1024)) > 0) {
-            QString uline = QString::fromLocal8Bit(line);
-            if (uline.startsWith(typeKey) ) {
-                printerType = uline.mid(nameKey.length());
-                printerType = printerType.simplified();
-            } else if (uline.startsWith(hostKey)) {
-                hostName = uline.mid(hostKey.length());
-                hostName = hostName.simplified();
-            } else if (uline.startsWith(hostPrinterKey)) {
-                hostPrinter = uline.mid(hostPrinterKey.length());
-                hostPrinter = hostPrinter.simplified();
-            } else if (uline.startsWith(nameKey)) {
-                namePrinter = uline.mid(nameKey.length());
-                namePrinter = namePrinter.simplified();
-            }
-        }
-        configFile.close();
-
-        printerType = printerType.trimmed();
-        if (printerType.indexOf(QLatin1String("postscript"), 0, Qt::CaseInsensitive) < 0)
-            continue;
-
-        int ii = 0;
-        while ((ii = namePrinter.indexOf(QLatin1Char('"'), ii)) >= 0)
-            namePrinter.remove(ii, 1);
-
-        if (hostName.isEmpty() || hostPrinter.isEmpty()) {
-            qt_perhapsAddPrinter(printers, printer.fileName(),
-                                 QLatin1String(""), namePrinter);
-        } else {
-            QString comment;
-            comment = namePrinter;
-            comment += QLatin1String(" (");
-            comment += hostPrinter;
-            comment += QLatin1Char(')');
-            qt_perhapsAddPrinter(printers, printer.fileName(),
-                                 hostName, comment);
-        }
-    }
-}
-
-
-// Every unix must have its own.  It's a standard.  Here is AIX.
-void qt_parseQconfig(QList<QPrinterDescription> *printers)
-{
-    QFile qconfig(QLatin1String("/etc/qconfig"));
-    if (!qconfig.open(QIODevice::ReadOnly))
-        return;
-
-    QTextStream ts(&qconfig);
-    QString line;
-
-    QString stanzaName; // either a queue or a device name
-    bool up = true; // queue up?  default true, can be false
-    QString remoteHost; // null if local
-    QString deviceName; // null if remote
-
-    QRegExp newStanza(QLatin1String("^[0-z\\-]*:$"));
-
-    // our basic strategy here is to process each line, detecting new
-    // stanzas.  each time we see a new stanza, we check if the
-    // previous stanza was a valid queue for a) a remote printer or b)
-    // a local printer.  if it wasn't, we assume that what we see is
-    // the start of the first stanza, or that the previous stanza was
-    // a device stanza, or that there is some syntax error (we don't
-    // report those).
-
-    do {
-        line = ts.readLine();
-        bool indented = line[0].isSpace();
-        line = line.simplified();
-
-        int i = line.indexOf(QLatin1Char('='));
-        if (indented && i != -1) { // line in stanza
-            QString variable = line.left(i).simplified();
-            QString value=line.mid(i+1, line.length()).simplified();
-            if (variable == QLatin1String("device"))
-                deviceName = value;
-            else if (variable == QLatin1String("host"))
-                remoteHost = value;
-            else if (variable == QLatin1String("up"))
-                up = !(value.toLower() == QLatin1String("false"));
-        } else if (line[0] == QLatin1Char('*')) { // comment
-            // nothing to do
-        } else if (ts.atEnd() || // end of file, or beginning of new stanza
-                    (!indented && line.contains(newStanza))) {
-            if (up && stanzaName.length() > 0 && stanzaName.length() < 21) {
-                if (remoteHost.length()) // remote printer
-                    qt_perhapsAddPrinter(printers, stanzaName, remoteHost,
-                                         QString());
-                else if (deviceName.length()) // local printer
-                    qt_perhapsAddPrinter(printers, stanzaName, QString(),
-                                         QString());
-            }
-            line.chop(1);
-            if (line.length() >= 1 && line.length() <= 20)
-                stanzaName = line;
-            up = true;
-            remoteHost.clear();
-            deviceName.clear();
-        } else {
-            // syntax error?  ignore.
-        }
-    } while (!ts.atEnd());
-}
-
-Q_GUI_EXPORT int qt_getLprPrinters(QList<QPrinterDescription>& printers)
-{
-    QByteArray etcLpDefault;
-    qt_parsePrintcap(&printers, QLatin1String("/etc/printcap"));
-    qt_parseEtcLpMember(&printers);
-    qt_parseSpoolInterface(&printers);
-    qt_parseQconfig(&printers);
-
-    QFileInfo f;
-    f.setFile(QLatin1String("/etc/lp/printers"));
-    if (f.isDir()) {
-        qt_parseEtcLpPrinters(&printers);
-        QFile def(QLatin1String("/etc/lp/default"));
-        if (def.open(QIODevice::ReadOnly)) {
-            etcLpDefault.resize(1025);
-            if (def.readLine(etcLpDefault.data(), 1024) > 0) {
-                QRegExp rx(QLatin1String("^(\\S+)"));
-                if (rx.indexIn(QString::fromLatin1(etcLpDefault)) != -1)
-                    etcLpDefault = rx.cap(1).toAscii();
-            }
-        }
-    }
-
-    char *def = 0;
-    f.setFile(QLatin1String("/etc/nsswitch.conf"));
-    if (f.isFile()) {
-        def = qt_parseNsswitchConf(&printers);
-    } else {
-        f.setFile(QLatin1String("/etc/printers.conf"));
-        if (f.isFile())
-            def = qt_parsePrintersConf(&printers);
-    }
-
-    if (def) {
-        etcLpDefault = def;
-        delete [] def;
-    }
-
-    QString homePrintersDefault = qt_getDefaultFromHomePrinters();
-
-    // all printers hopefully known.  try to find a good default
-    QString dollarPrinter;
-    {
-        dollarPrinter = QString::fromLocal8Bit(qgetenv("PRINTER"));
-        if (dollarPrinter.isEmpty())
-            dollarPrinter = QString::fromLocal8Bit(qgetenv("LPDEST"));
-        if (dollarPrinter.isEmpty())
-            dollarPrinter = QString::fromLocal8Bit(qgetenv("NPRINTER"));
-        if (dollarPrinter.isEmpty())
-            dollarPrinter = QString::fromLocal8Bit(qgetenv("NGPRINTER"));
-        if (!dollarPrinter.isEmpty())
-            qt_perhapsAddPrinter(&printers, dollarPrinter,
-                                 QCoreApplication::translate("QPrinter", "unknown"),
-                                 QLatin1String(""));
-    }
-
-    QRegExp ps(QLatin1String("[^a-z]ps(?:[^a-z]|$)"));
-    QRegExp lp(QLatin1String("[^a-z]lp(?:[^a-z]|$)"));
-
-    int quality = 0;
-    int best = 0;
-    for (int i = 0; i < printers.size(); ++i) {
-        QString name = printers.at(i).name;
-        QString comment = printers.at(i).comment;
-        if (quality < 5 && name == dollarPrinter) {
-            best = i;
-            quality = 5;
-        } else if (quality < 4 && !homePrintersDefault.isEmpty() &&
-                   name == homePrintersDefault) {
-            best = i;
-            quality = 4;
-        } else if (quality < 3 && !etcLpDefault.isEmpty() &&
-                    name == QLatin1String(etcLpDefault)) {
-            best = i;
-            quality = 3;
-        } else if (quality < 2 &&
-                    (name == QLatin1String("ps") ||
-                     ps.indexIn(comment) != -1)) {
-            best = i;
-            quality = 2;
-        } else if (quality < 1 &&
-                    (name == QLatin1String("lp") ||
-                     lp.indexIn(comment) > -1)) {
-            best = i;
-            quality = 1;
-        }
-    }
-
-    return best;
-}
-
-/////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////
-
-QList<QPrinter::PaperSize> qt_getCupsPrinterPaperSizes(int cupsPrinterIndex)
-{
-    QList<QPrinter::PaperSize> result;
-#if !defined(QT_NO_CUPS) && !defined(QT_NO_LIBRARY)
-    if (!QCUPSSupport::isAvailable() || cupsPrinterIndex < 0)
-        return result;
-    // Find paper sizes from CUPS.
-    QCUPSSupport cups;
-    cups.setCurrentPrinter(cupsPrinterIndex);
-    if (const ppd_option_t* size = cups.pageSizes()) {
-        for (int j = 0; j < size->num_choices; ++j)
-            result.append(string2PaperSize(size->choices[j].choice));
-    }
-    return result;
-#endif
-}
-
-#endif // QT_NO_PRINTER
-
-QT_END_NAMESPACE
diff --git a/src/gui/painting/qprinterinfo_unix_p.h b/src/gui/painting/qprinterinfo_unix_p.h
deleted file mode 100644
index f8721deaa9..0000000000
--- a/src/gui/painting/qprinterinfo_unix_p.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the QtGui module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** GNU Lesser General Public License Usage
-** This file may be used under the terms of the GNU Lesser General Public
-** License version 2.1 as published by the Free Software Foundation and
-** appearing in the file LICENSE.LGPL included in the packaging of this
-** file. Please review the following information to ensure the GNU Lesser
-** General Public License version 2.1 requirements will be met:
-** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights. These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU General
-** Public License version 3.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of this
-** file. Please review the following information to ensure the GNU General
-** Public License version 3.0 requirements will be met:
-** http://www.gnu.org/copyleft/gpl.html.
-**
-** Other Usage
-** Alternatively, this file may be used in accordance with the terms and
-** conditions contained in a signed written agreement between you and Nokia.
-**
-**
-**
-**
-**
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#ifndef QPRINTERINFO_UNIX_P_H
-#define QPRINTERINFO_UNIX_P_H
-
-#include <QtGui/qprinter.h>
-#include <QtCore/qstringlist.h>
-
-#ifndef QT_NO_NIS
-#  ifndef BOOL_DEFINED
-#    define BOOL_DEFINED
-#  endif
-
-#  include <sys/types.h>
-#  include <rpc/rpc.h>
-#  include <rpcsvc/ypclnt.h>
-#  include <rpcsvc/yp_prot.h>
-#endif // QT_NO_NIS
-
-#ifdef Success
-#  undef Success
-#endif
-
-#include <ctype.h>
-
-QT_BEGIN_NAMESPACE
-
-//
-//  W A R N I N G
-//  -------------
-//
-// This file is not part of the Qt API.  It exists purely as an
-// implementation detail.  This header file may change from version to
-// version without notice, or even be removed.
-//
-// We mean it.
-//
-
-#ifndef QT_NO_PRINTER
-
-struct QPrinterDescription {
-    QPrinterDescription(const QString &n, const QString &h, const QString &c, const QStringList &a)
-    : name(n), host(h), comment(c), aliases(a) {}
-    QString name;
-    QString host;
-    QString comment;
-    QStringList aliases;
-    bool samePrinter(const QString& printer) const {
-        return name == printer || aliases.contains(printer);
-    }
-};
-
-enum { Success = 's', Unavail = 'u', NotFound = 'n', TryAgain = 't' };
-enum { Continue = 'c', Return = 'r' };
-
-void qt_perhapsAddPrinter(QList<QPrinterDescription> *printers, const QString &name,
-                          QString host, QString comment,
-                          QStringList aliases = QStringList());
-void qt_parsePrinterDesc(QString printerDesc, QList<QPrinterDescription> *printers);
-
-int qt_parsePrintcap(QList<QPrinterDescription> *printers, const QString& fileName);
-QString qt_getDefaultFromHomePrinters();
-void qt_parseEtcLpPrinters(QList<QPrinterDescription> *printers);
-char *qt_parsePrintersConf(QList<QPrinterDescription> *printers, bool *found = 0);
-
-#ifndef QT_NO_NIS
-#if defined(Q_C_CALLBACKS)
-extern "C" {
-#endif
-int qt_pd_foreach(int /*status */, char * /*key */, int /*keyLen */,
-                  char *val, int valLen, char *data);
-
-#if defined(Q_C_CALLBACKS)
-}
-#endif
-int qt_retrieveNisPrinters(QList<QPrinterDescription> *printers);
-#endif // QT_NO_NIS
-char *qt_parseNsswitchPrintersEntry(QList<QPrinterDescription> *printers, char *line);
-char *qt_parseNsswitchConf(QList<QPrinterDescription> *printers);
-void qt_parseEtcLpMember(QList<QPrinterDescription> *printers);
-void qt_parseSpoolInterface(QList<QPrinterDescription> *printers);
-void qt_parseQconfig(QList<QPrinterDescription> *printers);
-int qt_getLprPrinters(QList<QPrinterDescription>& printers);
-
-QList<QPrinter::PaperSize> qt_getCupsPrinterPaperSizes(int cupsPrinterIndex);
-
-#endif // QT_NO_PRINTER
-
-QT_END_NAMESPACE
-
-#endif // QPRINTERINFO_UNIX_P_H