summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* docs: Don't mark qDrawBorderPixmap() as overloadSergio Martins2016-10-051-1/+0
| | | | | | | Because it doesn't overload anything. Change-Id: I871df10b4a0a46da238a5d1061cfb1aa34ccee03 Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
* QCocoaEventDispatcher: Save interrupt state between embedded callsGabriel de Dietrich2016-10-041-1/+1
| | | | | | | | | | | | | | | | Since QCocoaEventDispatcher::processEvents() resets the interrupt state, this may prevent a higher level event loop from returning. For example, calling QMenu::exec() and, as a result of an action being triggered, the application calls QCoreApplication::processEvents() after QMenu::hideEvent(). In this case, the menu event loop can be stuck until we run another event loop. Task-number: QTBUG-53947 Change-Id: If7efe1c3c07f7222c695195cbb4f41715e49b02e Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com> Reviewed-by: Wayne Arnold <wayne.arnold@autodesk.com> Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
* Revert "Doc: Added enums in qnamespace.qdoc"Peter Varga2016-10-041-11/+0
| | | | | | | | | | Remove duplicated enum values from doc. This reverts commit dfb55da5d67c21179ccef107351a90be2815e1e2. Change-Id: I27c85f66123731e0106bd702e843a24d7e9b5931 Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io> Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
* QFileSystemModel: Plug leak on file renamingMarc Mutz2016-10-041-1/+0
| | | | | | | | | | | | | | | | | In setData(), the old code both called Private::addNode(), which creates a QFileSystemNode and adds it to the parent's QHash of children, and also re-purposed the old node by taking it out of the children hash, adjusting the fileName member of the node and putting it back into the children hash under the new name, where it would overwrite the node just added under the same (new) name in addNode(). Since the hash stores naked pointers, no-one deletes the node that was put into the hash first. Fix by dropping the addNode() call completely. Change-Id: I0c37917fd0ffd74716393786c69b5bb172aa372e Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
* QFileSystemModel: fix unused variable with QT_NO_FILESYSTEMWATCHERMarc Mutz2016-10-041-2/+1
| | | | | | | | | | | | The QFileInfo 'info' is only used in code conditional on QT_NO_FILESYSTEMWATCHER, so move the definiton into the conditionally-compiled block, too. Turn it into an rvalue while at it. Change-Id: I9983bfdcd0b32d0abecf7c588973a60df9de8cbc Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
* Fix signal code generationAlbert Astals Cid2016-10-032-8/+34
| | | | | | | | | | | The old code is broken because it was passing signal.outputArgs as inputArgs variable of writeArgList, fix can not be passing signal.outputArgs as outputArgs of writeArgList since that ignores the first of the list, so i added a new function that does the right thing Change-Id: If54484e04880d5dcebfedb9d478ee0e9faf37baa Task-number: QTBUG-21577 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Plug remaining leaks in tests/auto/widgets/utilMarc Mutz2016-10-023-40/+28
| | | | | | | | | | | | | | | | | | | | In tst_QCompleter, two completers were leaked because they had no parent and setCompleter() calls don't reparent. Fixed by giving them parents. In tst_QUndo*, fix lots of leaked QActions by storing them in a QScopedPointer. There were some half-hearted attempts to clean them up with manual deletes, but I ported these to scoped pointers, too, to make the code more robust in the face of failures. This fixes the remaining errors in GCC 6.1 Linux ASan runs of tests/auto/widgets/util. Change-Id: Icc5248cc9cf4514540915924df1c4d9e09c071fa Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
* Plug QMimeData leaks in QXcbClipboardMarc Mutz2016-10-022-6/+8
| | | | | | | | | | | | | | | | | QXcbClipboard failed to delete the various QMimeData instances it owns. For m_xClipboard, where the two QXcbClipboardMime instances are never the same, fix the leak by using a scoped instead of a naked pointer. For m_clientClipboard, where the two QMimeData could be identical objects, keep the naked pointers, but delete the objects manually in the QXcbClipboard destructor, paying attention to the case where they're the same object. Change-Id: I5ce0e3e8fcec068aeb344ca806cdf2667378e946 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Fix explicit -sdk iphoneos buildsJake Petroules2016-10-011-1/+6
| | | | | | | | | | | | | | | The order in which exclusive builds are added affects the order of values in SUBTARGETS. xcodebuild.mk parses the value of SUBTARGETS in the Makefile and selects the first entry, which would always be release-iphonesimulator regardless of the build type. This obviously caused -sdk iphoneos builds to fail. This patch switches the order of in which exclusive builds are added so that the entries which are not present in a particular build type are always added last. Change-Id: I306d6f7430c1dff3d741a8c5182b7af81d000e7f Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
* iOS: (crash fix) ensure we don't clear focus object in a text responder ↵Richard Moe Gustavsen2016-09-301-1/+1
| | | | | | | | | | | | | | transition (Backport of 5.7/8586ccc). The original patch was implemented to handle crashes after e78ca787ae459f. But the former was pushed to 5.7, and the latter to 5.6. So we need to backport it, otherwise the same crashes will still happen in 5.6 (e.g when transferring focus from a text edit to a (picker) menu). Change-Id: I13037735dc316bceadb571e67f38a310c8a1bfae Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
* iOS: hide shortcuts bar on iPad when showing menusRichard Moe Gustavsen2016-09-303-0/+13
| | | | | | | | | | | | | | On iPad, a shortcuts bar with extra controls are shown on top of the keyboard with opertions like cut and copy. This is unwanted when using the keyboard to show menus. This patch will add extra private information to IM platform data when using menus, so that we hide the shorcuts menu when showing the custom input panel. Task-number: QTBUG-49893 Change-Id: Iaa8e1ff18acebec8be69699b3fd9470c69ab34d7 Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
* Data files for binary compatibility tests updated for Qt 5.6Milla Pohjanheimo2016-09-3011-0/+92679
| | | | | | | | | The generated data files for the binary compatibility test updated for QtBase. Change-Id: Idae703c83f55ff17cada4419db742ea12b22bf86 Reviewed-by: Sergio Ahumada <sahumada@texla.cl> Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
* Plug remaining leaks in tests/auto/widgets/styleMarc Mutz2016-09-301-3/+3
| | | | | | | | | | | | | | | The usual: - delete styles Either by using QScopedPointer. This fixes the remaining errors in GCC 6.1 Linux ASan runs of tests/auto/widgets/styles. Change-Id: Ifba59085c057d474bf964cbb93010c408d773a61 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
* tst_QAbstractSlider: fix strict-aliasing warningsMarc Mutz2016-09-301-25/+23
| | | | | | | | | | | | | | | | | | | GCC warned: tst_qabstractslider.cpp:858:89: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Qt::Orientation orientation = *reinterpret_cast<Qt::Orientation*>(&sliderOrientation); ^ tst_qabstractslider.cpp:867:72: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] orientation = *reinterpret_cast<Qt::Orientation*>(&wheelOrientation); ^ The solution, of course, would be to use a static_cast here, but why go via int in the first place? Qt::Orientation can perfectly well be used in QFETCH, as proven by tst_qmainwindow, among other things. Change-Id: I97916a50405e16d114837bc52580ce6666d74b17 Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
* fix warning in qmakevfs without PROEVALUATOR_FULLOswald Buddenhagen2016-09-291-0/+1
| | | | | | | amends 57ca8d2698. Change-Id: Ibf56c15ab46b9dfa856dc0af7ae2e8c84caa3063 Reviewed-by: Jake Petroules <jake.petroules@qt.io>
* report cumulativity of $$system() and evaluator error output as wellOswald Buddenhagen2016-09-292-2/+4
| | | | | | | | | | | | | so far, we "downgraded" only explicit error() output, but other errors may happen as well while doing semi-exact evaluation of .prf files - at least hypothetically. amends 08d0cb6f8e. Change-Id: I32819a569dbed2dbdb37c5c23bf4a5a18d3c64ea Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> (cherry picked from qttools/ea1a5c3534f089c0e704808a0fb029eda8f753b4) Reviewed-by: Jake Petroules <jake.petroules@qt.io>
* copy global qdoc config files in non-prefix shadow buildsOswald Buddenhagen2016-09-292-5/+8
| | | | | | | | | that required factoring out the docs installation to a separate project, as COPIES doesn't work in subdirs projects. it's cleaner this way anyway. Change-Id: I594f3ecdae67417511034ab993904c962b86b282 Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
* fix also QMAKE_CXXFLAGS_RELEASE_WITH_DEBUGINFOOswald Buddenhagen2016-09-291-0/+1
| | | | | | | | | | amends eadd7e9cfb. Task-number: QTBUG-56162 Change-Id: Ie8162ac7dc01726d902bcbe5bf749cc1610d8be3 Reviewed-by: Hannah von Reth <hannah.vonreth@kdab.com> Reviewed-by: Jake Petroules <jake.petroules@qt.io> Reviewed-by: Morten Minde Neergaard <m-qt@8d.no>
* QtTest: don't use double-underhanded identifiersMarc Mutz2016-09-291-27/+27
| | | | | | | | | | | | Identifiers that match _[A-Z_]* are reserved for use by std implementations. Qt is not an implementation of the standard, so it mustn't use such identifiers. Use plain names for macro arguments and the qt_test_ prefix for C++ variables declared in expansions of those macros. Change-Id: I22be167e36676199a5b084df3f4c5ef86c89f000 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* [doc] Fix docs of QLayoutItem::widget()Marc Mutz2016-09-291-2/+12
| | | | | | | | | | | | | QWidget does not inherit QLayoutItem (unlike QLayout and QSpacerItem, which do), so don't claim that in the docs. Added a note. Added cross-references between layout(), widget() and spacerItem(). Change-Id: I518b6842ef76fd1b72226b790dab75f429fae556 Reviewed-by: Mitch Curtis <mitch.curtis@qt.io> Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
* Fix crash when doing many text layouts with superscript/subscriptEskil Abrahamsen Blomfeldt2016-09-292-4/+62
| | | | | | | | | | | | | | | | | | | | | | | | After e109b8a0f3c89c595f0da689e7ee847130e2ee47, it is possible that the cache will be flushed as a result of inserting a new font rather than just when the timer event triggers. When doing superscript and subscript text layouts, we would first get a regular font engine, then a scaled one, and then reference the regular font engine *after* getting the scaled one. If the regular font engine was deleted as a result of inserting the scaled one, we would get a dangling pointer and crash. The situation was improved by 49926bb9ef983d4c19aed635a00b388252c065e4. You would now to switch between 256 different fonts in the layout in order to trigger it. The test in the commit will trigger the crash even with this change. [ChangeLog][Qt Gui][Text] Fixed a crash that could happen if you were doing many different text layouts with different fonts and superscript or subscript alignment. Task-number: QTBUG-53911 Change-Id: Ia33108252e030eff25924ef1b7c10b9d59b5bc8c Reviewed-by: Lars Knoll <lars.knoll@qt.io>
* xcb: Treat bitmap cursors differently from shaped cursorsRobin Burchell2016-09-293-11/+38
| | | | | | | | | | | | | | | | | | | QXcbCursor had a "cache" of cursor handles. Unfortunately, as QXcbCursor has its lifetime tied to the screen, this cache grew unbounded whenever the cursor was set: this could be witnessed worst when repeatedly setting the current cursor to a different pixmap each time. We fix this by keeping the cursor cache only for the "regular" shaped cursors that are often shared between windows, working on the assumption that custom cursors are generally specific only to a given window. This makes the lifetime of the bitmap cursors much more clear: they are tied to that window, and when the window is destroyed (or changes cursor), so too is the bitmap cursor destroyed (if set). Reported-by: Will Thompson <wjt@endlessm.com> Change-Id: Ia558d858ff49e89cd5220344567203eb0267a133 Reviewed-by: Uli Schlachter <psychon@znc.in> Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
* Add the ability for qmake to build Xcode asset catalogsJake Petroules2016-09-285-17/+115
| | | | | | | | | | | | | | | This essentially emulates Xcode behavior for QMAKE_BUNDLE_DATA. This is mostly for our own internal use. No documentation is provided. Variables introduced: - QMAKE_ASSET_CATALOGS - QMAKE_ASSET_CATALOGS_APP_ICON - QMAKE_ASSET_CATALOGS_BUILD_PATH - QMAKE_ASSET_CATALOGS_INSTALL_PATH Change-Id: I9577415d637f022d05f301c5a0d799483cd2a963 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
* syncqt.pl: fix a few misguided regexes to match .h file namesEdward Welbourne2016-09-281-3/+3
| | | | | | | | | | To match correctly (only) .h files, a regex needs to end in \.h$ Some of them missed the \, one missed the $. (The last also had a legitimate .* before its misunescaped .) One pair matched _p.h and _pch.h, which could be combined. Change-Id: I7539a28eb7017cd0f1b36c72e05108e03a68a952 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
* Plug memleaks in tst_QWidgetMarc Mutz2016-09-281-3/+7
| | | | | | | | | | | | We need to delete the style returned from QStyleFactory::create() ourselves, so put them into a QScopedPointer. The alternative would have been to create this once, as a member of tst_QWidget, but this is the minimal approach that ensures behavior just as the old code, but without the leak. Change-Id: I527f1031c57be6f05942f4acc057e7dae1af2571 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QTapAndHoldGestureRecognizer: Fix several UBs (invalid cast) in recognize()Marc Mutz2016-09-281-10/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As found by UBSan: qstandardgestures.cpp:511:67: runtime error: downcast of address 0x7ffc9beb1b90 which does not point to an object of type 'QTouchEvent' 0x7ffc9beb1b90: note: object is of type 'QPlatformSurfaceEvent' fc 7f 00 00 08 93 b1 6f f5 2a 00 00 00 00 00 00 00 00 00 00 d9 00 ec 9b 00 00 00 00 49 01 c1 5e ^~~~~~~~~~~~~~~~~~~~~~~ vptr for 'QPlatformSurfaceEvent' #0 0x2af55edfa66a in QTapAndHoldGestureRecognizer::recognize(QGesture*, QObject*, QEvent*) qstandardgestures.cpp:511 #1 0x2af55ee3d9bb in QGestureManager::filterEventThroughContexts(QMultiMap<QObject*, Qt::GestureType> const&, QEvent*) qgesturemanager.cpp:276 #2 0x2af55ee4565b in QGestureManager::filterEvent(QWidget*, QEvent*) qgesturemanager.cpp:512 #3 0x2af55ee53945 in QGestureManager::filterEvent(QObject*, QEvent*) qgesturemanager.cpp:556 #4 0x2af55ea1b83a in QApplication::notify(QObject*, QEvent*) qapplication.cpp:3053 #5 0x2af573949d0f in QCoreApplication::notifyInternal2(QObject*, QEvent*) qcoreapplication.cpp:988 #6 0x2af56982ff94 in QCoreApplication::sendEvent(QObject*, QEvent*) qcoreapplication.h:231 #7 0x2af56982ff94 in QWindowPrivate::create(bool) qwindow.cpp:435 #8 0x2af55ecd10fe in QWidgetPrivate::create_sys(unsigned long long, bool, bool) qwidget.cpp:1471 #9 0x2af55ecc770e in QWidget::create(unsigned long long, bool, bool) qwidget.cpp:1333 #10 0x2af55ed80618 in QWidget::setVisible(bool) qwidget.cpp:8156 #11 0x4feec4 in tst_QWidget::touchEventsForGesturePendingWidgets() tst_qwidget.cpp:9824 qstandardgestures.cpp:512:67: runtime error: downcast of address 0x7ffc9beb1b90 which does not point to an object of type 'QMouseEvent' 0x7ffc9beb1b90: note: object is of type 'QPlatformSurfaceEvent' fc 7f 00 00 08 93 b1 6f f5 2a 00 00 00 00 00 00 00 00 00 00 d9 00 ec 9b 00 00 00 00 49 01 c1 5e ^~~~~~~~~~~~~~~~~~~~~~~ vptr for 'QPlatformSurfaceEvent' #0 0x2af55edfaa19 in QTapAndHoldGestureRecognizer::recognize(QGesture*, QObject*, QEvent*) qstandardgestures.cpp:512 [... skipping common lines ...] qstandardgestures.cpp:514:95: runtime error: downcast of address 0x 0x7ffc9beb1b90: note: object is of type 'QPlatformSurfaceEvent' fc 7f 00 00 08 93 b1 6f f5 2a 00 00 00 00 00 00 00 00 00 00 d9 00 ec 9b 00 00 00 0 ^~~~~~~~~~~~~~~~~~~~~~~ vptr for 'QPlatformSurfaceEvent' #0 0x2af55edfa966 in QTapAndHoldGestureRecognizer::recognize(QGesture*, QObject*, QEvent*) qstandardgestures.cpp:514 [... skipping common lines ...] The problem is that the casts are done outside the switch that determines the event's type, so for any given event object, at least any two of the casts are invalid. This could actually be a real problem, because it's trivial for a compiler to prove that these three lines unconditionally invoke UB, so it has all the right in the world to decide to drop the complete rest of the function, using this line of reasoning: 1. The only way for these three casts not to be UB is if event == nullptr. 2. If event == nullptr, then event->type() invokes UB, so event cannot be nullptr. 3. The only way both can be true is if this code path is never taken. I can thus assume that object == state && event->type() == QEvent::Timer is always true, drop the check and execute the if block unconditionally (I need to call QEvent::type(), to satisfy the as-if-rule, but I needn't check its return value). Fix by moving the casts where they belong: into each case of the switch, where the type of the event has been checked to match the target type of the cast. Change-Id: I3aee8e213dc19d2f51636bcc5221cc92b3142e58 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QWidget: Fix UB (invalid cast) in sendResizeEvents()Marc Mutz2016-09-281-1/+3
| | | | | | | | | | | | | | | | | | | Found by UBSan: qwidget.cpp:5228:62: runtime error: downcast of address 0x61b00003d480 which does not point to an object of type 'QWidget' 0x61b00003d480: note: object is of type 'QMainWindowLayout' bc 00 00 75 90 2e 2a 78 4f 2b 00 00 40 c1 02 00 f0 60 00 00 78 2f 2a 78 4f 2b 00 00 00 00 00 00 ^~~~~~~~~~~~~~~~~~~~~~~ vptr for 'QMainWindowLayout' #0 0x2b4f70efb1c2 in sendResizeEvents qwidget.cpp:5228 #1 0x2b4f70f65f7f in QWidget::grab(QRect const&) qwidget.cpp:5252 #2 0x6b1746 in tst_QWidget::render_task188133() tst_qwidget.cpp:6615 Fix by performing the cast only after the test for isWidgetType() has succeeded. Change-Id: I061a60ef35bcb5fbefb9bc7b84706c9dd5afd207 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* tst_QApplication: Fix UBs (invalid cast) in focusMouseClick()Marc Mutz2016-09-281-22/+3
| | | | | | | | | | | | | | | | | | | Found by UBSan: tst_qapplication.cpp:1754:48: runtime error: member access within address 0x7ffda11f2220 which does not point to an object of type 'SpontaneousEvent' 0x7ffda11f2220: note: object is of type 'QMouseEvent' The code attempted to model the layout of a QEvent with another class that allows public access to the memory location that (hopefully) corresponds to QEvent::spont, gaining access by casting a QEvent object to that specifically-crafted class. Fix by the using the existing QSpontaneKeyEvent::setSpontaneous() call, which, despite its name, works for all QEvent subclasses, and which has already been fixed to not invoke UB (in bc087db). Change-Id: I7db8b8a8a823f7d61ab17375142d19dc3874fea5 Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
* QGraphicsAnchorLayout: Fix invalid use of Q_AUTOTEST_EXPORTPalo Kisa2016-09-272-3/+3
| | | | | | | | | The Q_AUTOTEST_EXPORT is defined in all cases. So usage as #if defined(Q_AUTOTEST_EXPORT) was wrong. Change-Id: Ia1c1526ad08fdfa35ca773d7c62f8bbba39a6d38 Reviewed-by: Marc Mutz <marc.mutz@kdab.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
* Extend tested formats in lancelotAllan Sandfeld Jensen2016-09-271-0/+26
| | | | | | | | | | Adds two formats that does not have optimized code-paths in qdrawhelper to ensure the generic path has coverage. This has already uncovered one bug fixed before this patch could go in. Change-Id: I0e0a1a873555b27f6438f69a76982b8e06263dcf Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
* syncqt.pl: also allow digits in upper-case macro namesEdward Welbourne2016-09-271-1/+1
| | | | | | | | | The check for Q_... macros used a regex that didn't allow digits; it thus failed to match Q_DECLARE_SHARED_NOT_MOVABLE_UNTIL_QT6(). Change-Id: I3f9339349aa21e2fea04a7f53d9d8e0903e4c65b Reviewed-by: Marc Mutz <marc.mutz@kdab.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
* QDateTimeEdit: synchronize time-spec before initializing displayEdward Welbourne2016-09-272-1/+11
| | | | | | | | | | | | | | | | | QDateTimeEdit ignores the time-spec of its date-time value, using its own time-spec instead; mostly, this works because it first conforms the value to its own time-spec. However, during construction, before doing this, it set up its display data, which could leave it with a different time (rather than a different representation of the given time) than it was asked to use. Moved the updateTimeSpec() calls to immediately after setting value in QDateTimeEditPrivate::init() to ensure correct handling. Added test. Task-number: QTBUG-54781 Change-Id: I3b07c10997abb858fc0b40558bff96e3fdabbd83 Reviewed-by: Jesus Fernandez <jesus.fernandez@qt.io> Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
* Add GLSL version 110 on Intel with compat profilesLaszlo Agocs2016-09-271-2/+12
| | | | | | | | | | | | | The Windows Intel drivers reject shader sources without a version directive in 3.2+ compatibility profiles. This is odd but can be worked around by adding #version 110 (which should be the default...) Change-Id: I1ccac41b80121e6423d4f8964d03dda52a433296 Task-number: QTBUG-55733 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com> Reviewed-by: Andy Nichols <andy.nichols@qt.io>
* QSslSocket: respect read buffer's max size (SecureTransport)Timur Pocheptsov2016-09-272-1/+64
| | | | | | | | | | | | | | | | | 1. QSslSocketBackendPrivate::transmit was ignoring 'readBufferMaxSize'; as a result, we can have a user trying to set read buffer's size to a small value (and more important - reading slowly in a small chunks from this socket), but SSL itself socket reading 'too fast', potentially growing its internal buffer to a huge size. This also results in auto-tests failing - whenever we're trying to limit read rate in some test. 2. Update qsslsocket auto-test. Task-number: QTBUG-43388 Task-number: QTBUG-55170 Change-Id: Iedece26df0ac5b3b7cad62cc8c98aedc28e7ca5b Reviewed-by: Richard J. Moore <rich@kde.org>
* Plug memleaks in tst_QGridLayoutMarc Mutz2016-09-271-3/+5
| | | | | | | | | | | | | In setMinAndMaxSize(), QLayout::removeItem() doesn't actually delete the removed item. We have to do that ourselves (RAII not necessary, since the spacer is owned by the layout until we remove it). In distributeMultiCell(), allocate the QStyle subclass on the stack so the compiler cleans it up properly on all exit paths (was: unconditional leak). Change-Id: I24f8f11af2bfc5abf78f9aab0139dcfe0187402b Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
* Plug memleaks in tst_QBoxLayoutMarc Mutz2016-09-271-2/+2
| | | | | | | | | | | | In sizeConstraints(), QLayout::takeAt(), as the name suggests, doesn't actually delete the item. We have to do that ourselves. Likewise, in replaceWidget(), QLayout::replaceWidget() also doesn't delete the affected item, but returns it. That's spectacularly bad API design, but the leak is easy to fix: just delete the return value. Change-Id: I8dcbc59898949eabce766cda2c0edae2e1f2799e Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
* QLayout: Fix UB (invalid cast) in widgetEvent()Marc Mutz2016-09-271-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Found by UBSan: qlayout.cpp:612:50: runtime error: downcast of address 0x7ffcd4c39a70 which does not point to an object of type 'QWidget' 0x7ffcd4c39a70: note: object is of type 'QObject' 00 00 00 00 b0 43 4c 7b f5 2a 00 00 70 c9 28 02 00 00 00 00 08 93 9a 77 f5 2a 00 00 00 00 c3 d4 ^~~~~~~~~~~~~~~~~~~~~~~ vptr for 'QObject' #0 0x2af56f189960 in QLayout::widgetEvent(QEvent*) qlayout.cpp:612 #1 0x2af56f037660 in QApplicationPrivate::notify_helper(QObject*, QEvent*) qapplication.cpp:3732 #2 0x2af56f06ae5b in QApplication::notify(QObject*, QEvent*) qapplication.cpp:3704 #3 0x2af57989e383 in QCoreApplication::notifyInternal2(QObject*, QEvent*) qcoreapplication.cpp:988 #4 0x2af5799c1696 in QCoreApplication::sendEvent(QObject*, QEvent*) qcoreapplication.h:231 #5 0x2af5799c1696 in QObjectPrivate::setParent_helper(QObject*) qobject.cpp:2043 #6 0x2af5799c4823 in QObject::~QObject() qobject.cpp:1095 #7 0x2af56f2d205d in QWidget::~QWidget() qwidget.cpp:1549 #8 0x2af56f9c1366 in QFrame::~QFrame() qframe.cpp:262 #9 0x2af56f9e76cb in QLabel::~QLabel() qlabel.cpp:247 #10 0x458077 in tst_QStyleSheetStyle::emptyStyleSheet() tst_qstylesheetstyle.cpp:1400 Fix by not casting at all (or, to be precise, casting implicitly up instead of explicitly down). Change-Id: Ic19fd29e0cabd1aee5b1c93ca4c0fc70bc7a5927 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QStackedLayout: Fix UB (invalid cast) in qt_wasDeleted()Marc Mutz2016-09-272-8/+5
| | | | | | | | | | | | | | | | | | | | | | | | Found by UBSan: qstackedlayout.cpp:261:98: runtime error: downcast of address 0x60400003cd10 which does not point to an object of type 'QtFriendlyLayoutWidget' 0x60400003cd10: note: object is of type 'QWidget' 0e 00 80 76 70 0b 06 3f d6 2a 00 00 00 99 00 00 50 61 00 00 20 0d 06 3f d6 2a 00 00 00 00 be be ^~~~~~~~~~~~~~~~~~~~~~~ vptr for 'QWidget' #0 0x2ad637b8f58f in qt_wasDeleted qstackedlayout.cpp:261 #1 0x2ad637b8f58f in QStackedLayout::takeAt(int) qstackedlayout.cpp:285 #2 0x2ad637b4afcb in QLayout::removeWidget(QWidget*) qlayout.cpp:1369 #3 0x413534 in tst_QStackedLayout::testCase() tst_qstackedlayout.cpp:155 Caused by using a struct to get access to QWidgetPrivate::wasDeleted using a cast. That cast is invalid, of course, so simply use QWidgetPrivate::get(). Caveat: we need a const version of that function, but that didn't exist, yet, so added one. Change-Id: I27d449b90be7e2072646d950c676b500ef698349 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QObject test: check that throwing from a child's constructor worksGiuseppe D'Angelo2016-09-261-0/+76
| | | | | | | | A check "just in case" -- we don't want leaks nor crashes due to double deletions, and so on. Change-Id: I24f1a486f0d438595bbe352ab780b07c5d53acbd Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
* Merge remote-tracking branch 'origin/5.6.2' into 5.6Liang Qi2016-09-251-0/+47
|\ | | | | | | Change-Id: Ifb829506860af3cc898cb165241dc237a474c313
| * add buildsystem changelog for 5.6.2v5.6.2Oswald Buddenhagen2016-09-251-0/+47
| | | | | | | | | | Change-Id: I39f5c4918107d894b8335b11c3b9c26b2b728421 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* | QGraphicsScene: don't search for nullptrMarc Mutz2016-09-241-4/+5
| | | | | | | | | | | | | | | | | | | | Following f6cb8b1af8f15a06898c5c71f81c64779d9478f6, take advantage of the nullptr return case of QGraphicsItem ::toGraphicsObject() by not looking up nullptr in the QList and the two QHashes. They don't contain nullptrs. Change-Id: Ic1cfbb4c60061577a09348ef78fdc573f95ad9a8 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
* | Q(Color|File)Dialog: Fix several UBs (invalid cast/member call) in ↵Marc Mutz2016-09-242-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Private::canBeNativeDialog() Found by UBSan: qcolordialog.cpp:86:5: runtime error: downcast of address 0x7ffdf50c1ec0 which does not point to an object of type 'QColorDialog' 0x7ffdf50c1ec0: note: object is of type 'QDialog' fd 7f 00 00 d8 6e c7 23 b7 2a 00 00 50 c1 af 01 00 00 00 00 b0 70 c7 23 b7 2a 00 00 00 00 1a 1e ^~~~~~~~~~~~~~~~~~~~~~~ vptr for 'QDialog' #0 0x2ab720e4ec97 in QColorDialogPrivate::q_func() const qcolordialog.cpp:86 #1 0x2ab720e4ec97 in QColorDialogPrivate::canBeNativeDialog() const qcolordialog.cpp:1865 #2 0x2ab720e84ed6 in QDialog::setVisible(bool) qdialog.cpp:696 #3 0x2ab720e6c1fa in QDialog::~QDialog() qdialog.cpp:357 #4 0x2ab720e2b276 in QColorDialog::~QColorDialog() qcolordialog.cpp:2187 #5 0x2ab720e5e2c6 in QColorDialog::getColor(QColor const&, QWidget*, QString const&, QFlags<QColorDialog::ColorDialogOption>) qcolordialog.cpp:2148 #6 0x2ab720e5e473 in QColorDialog::getRgba(unsigned int, bool*, QWidget*) qcolordialog.cpp:2176 #7 0x407180 in tst_QColorDialog::testGetRgba() tst_qcolordialog.cpp:118 qfiledialog_p.h:112:5: runtime error: downcast of address 0x7ffd6858cc60 which does not point to an object of type 'QFileDialog' 0x7ffd6858cc60: note: object is of type 'QDialog' a1 2b 00 00 d8 1e 5e 0c a1 2b 00 00 b0 af 01 20 a1 2b 00 00 b0 20 5e 0c a1 2b 00 00 00 00 46 00 ^~~~~~~~~~~~~~~~~~~~~~~ vptr for 'QDialog' #0 0x2ba10980a9e7 in QFileDialogPrivate::q_func() const qfiledialog_p.h:112 #1 0x2ba10980a9e7 in QFileDialogPrivate::canBeNativeDialog() const qfiledialog.cpp:695 #2 0x2ba1097efe36 in QDialog::setVisible(bool) qdialog.cpp:696 #3 0x2ba1097d715a in QDialog::~QDialog() qdialog.cpp:357 #4 0x2ba109854c4b in QFileDialog::~QFileDialog() qfiledialog.cpp:380 #5 0x4179dc in tst_QFiledialog::init() tst_qfiledialog.cpp:175 Fix by replacing Q_Q with the the equivalent expression for QDialog. We can't re-use QDialogPrivate::q_func() here, since that is private, and probably should stay like that. Also fix an invalid member call in QColorDialogPrivate::canBeNativeDialog(): qcolordialog.cpp:2050:5: runtime error: member call on address 0x7ffdf50c1ec0 which does not point to an object of type 'QColorDialog' 0x7ffdf50c1ec0: note: object is of type 'QDialog' fd 7f 00 00 d8 6e c7 23 b7 2a 00 00 50 c1 af 01 00 00 00 00 b0 70 c7 23 b7 2a 00 00 00 00 1a 1e ^~~~~~~~~~~~~~~~~~~~~~~ vptr for 'QDialog' #0 0x2ab720e4e5ea in QColorDialog::options() const qcolordialog.cpp:2050 #1 0x2ab720e4e8c8 in QColorDialogPrivate::canBeNativeDialog() const qcolordialog.cpp:1870 #2 0x2ab720e84ed6 in QDialog::setVisible(bool) qdialog.cpp:696 #3 0x2ab720e6c1fa in QDialog::~QDialog() qdialog.cpp:357 #4 0x2ab720e2b276 in QColorDialog::~QColorDialog() qcolordialog.cpp:2187 #5 0x2ab720e5e2c6 in QColorDialog::getColor(QColor const&, QWidget*, QString const&, QFlags<QColorDialog::ColorDialogOption>) qcolordialog.cpp:2148 #6 0x2ab720e5e473 in QColorDialog::getRgba(unsigned int, bool*, QWidget*) qcolordialog.cpp:2176 #7 0x407180 in tst_QColorDialog::testGetRgba() tst_qcolordialog.cpp:118 by accessing the data member directly instead of through the Public API. Fix the same code in QFileDialog, even though the autotest coverage is too limited for UBSan to point that one out explicitly. This commit amends abe8b4ab9b5243b477c72f3e900d4f6cca79b5c5, in which it should have been included in the first place... Change-Id: Iff0538eba61d2381359f0b61f35918d643f7aa0c Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* | QApplication: Fix UB (invalid cast) in notify()Marc Mutz2016-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Found by UBSan, which was so shocked that it crashed: #6 <signal handler called> #7 __dynamic_cast () at ../../../../gcc/libstdc++-v3/libsupc++/dyncast.cc:50 #8 0x00002b9278fa1c3b in __ubsan::checkDynamicType(void*, void*, unsigned long) () from /opt/gcc/trunk/lib64/libubsan.so.0 #9 0x00002b9278fa10c3 in HandleDynamicTypeCacheMiss(__ubsan::DynamicTypeCacheMissData*, unsigned long, unsigned long, __ubsan::ReportOptions) () from /opt/gcc/trunk/lib64/libubsan.so.0 #10 0x00002b9278fa1783 in __ubsan_handle_dynamic_type_cache_miss () from /opt/gcc/trunk/lib64/libubsan.so.0 #11 0x00002b926c08ab8d in QApplication::notify(QObject*, QEvent*) () at /home/marc/Qt/qt5/qtbase/src/widgets/kernel/qapplication.cpp:3120 (full backtrace originates in tst_QWidget::testDeletionInEventHandlers(), testing key events). Fix is simple: just perform the cast before delivering the event. Change-Id: Ic26e36f47ef57e980c0dba00900927ff39fe6392 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* | QNetworkInterface: fix reporting of virtual interfaces on LinuxThiago Macieira2016-09-241-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | We checked if we had seen the interface by looking into seenInterfaces and seenIndexes, but we never updated those variables with what we saw in this block. This fixes the reporting of PPP interfaces as well as TUN/TAP virtual interfaces. Change-Id: I33dc971f005a4848bb8ffffd1476830b8482b808 Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
* | Fix linear RGB16 gradientsAllan Sandfeld Jensen2016-09-231-3/+4
| | | | | | | | | | | | | | | | | | | | | | Writing to solid overwrites part of the gradient input messing up later lines. In particular repeating gradients tended to be broken. Tested by lancelot (once the baseline is correct). Change-Id: I64222048ba67b0424b44822f09ddc947973145a6 Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io> Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
* | Fix test for sandboxed platformsMaurice Kalinowski2016-09-231-3/+3
| | | | | | | | | | | | | | The test function tries to create a file inside the application bundle. Change-Id: Ia429b42b102d5e98f20694058fa2633e3c7de30a Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
* | QWindowPrivate::maybeQuitOnLastWindowClosed(): Skip tooltipsFriedemann Kleint2016-09-231-1/+1
| | | | | | | | | | | | | | | | | | Windows of type Qt::ToolTip should not prevent closing the application when checking for the last window. Task-number: QTBUG-55523 Change-Id: I47c51abe79bf6c857aba229960de95e1a23efb10 Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
* | QToolTip: Hide when close event is receivedFriedemann Kleint2016-09-231-0/+1
| | | | | | | | | | | | | | | | | | | | Hide the tooltip when a window is requested to close in addition to focus/activation change. This fixes the tooltip blocking the shutdown of a Qt Quick Controls application. Task-number: QTBUG-55523 Change-Id: I09d10fc162ce125075b03c534412b488974d12b9 Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
* | Merge "Merge remote-tracking branch 'origin/5.6.2' into 5.6" into ↵Liang Qi2016-09-232-18/+46
|\ \ | | | | | | | | | refs/staging/5.6
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-15 14:06:18 +0000