summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* qsslsocket_openssl_symbols.cpp: replace mutex pool use with QBasicMutexMarc Mutz2019-07-081-14/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | The use of QMutexPool caused an #ifdef, because, lacking an object, some OpenSSL function pointer was used as the address required as input for the mutex pool. Sadly, the names of the functions differ between OpenSSL versions, thus the need for an #ifdef. By simply using a QBasicMutex (defined at namespace scope to evade https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79561), the #ifdef can go away. Another level of #ifdefs goes away because, even for non-QT_CONFIG(thread) builds, Q*Mutex etc are defined, just as no-ops. So we can freely use them without QT_CONFIG(thread) guard, unlike QMutexPool. Finally, optimize for the (common?) case of already-loaded libraries by making symbolsResolved an atomic variable, and checking that before taking the mutex (double-checked locking, done right). For reasons of said GCC bug, again, the QBasicAtomic is defined at namespace scope. And then move the other boolean there for symmetry. Change-Id: Ic5f44871fb200e5368b9af327e4d1e852fbc586c Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
* Fix build without features.textmarkdownwriterTasuku Suzuki2019-07-081-1/+1
| | | | | Change-Id: I30b39bb6ac4c24281c7fc87573936f62512ce015 Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
* QTextBrowser: assume Markdown is UTF-8Shawn Rutledge2019-07-083-4/+37
| | | | | | | | | That's how CommonMark specifies it. The HTML codec-guessing algorithm was making it fall back to Latin1 in practice, which was screwing up any Unicode characters found in the markdown source. Change-Id: I4021adc4a68591ecfd56ef24971af53ce3e9c96d Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
* QDBusConnectionInterface: Add activatableServiceNamesKai Uwe Broulik2019-07-072-0/+14
| | | | | | | | | This allows to query all names that can be activated on the bus. Change-Id: I8f894bf858eb18b67a074ca666ad3200ed99c373 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Q_ARRAY_LITERAL: protect the check for literal typesGiuseppe D'Angelo2019-07-062-1/+19
| | | | | | | | | | Some compilers (hello, MSVC) do not produce literal types in Qt because their constexpr support has been blacklisted. Therefore, amend the check for literal types in Q_ARRAY_LITERAL: only do the check if the compiler supports constexpr. Change-Id: I7cffe00dde447d975aa6a7d02248df9c351508ff Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
* Fontconfig font database: Short-circuit matching by filenameAndreas Hartmetz2019-07-061-22/+50
| | | | | | | | | | | | | | | | If the filename matches, no other matching is necessary. Fontconfig doesn't have a fast path for that, so implement one here. Fontconfig is unlikely to add that fast path, see here: https://gitlab.freedesktop.org/fontconfig/fontconfig/issues/103 With -O1 builds of Qt and KDE stack, 358 fonts installed according to KDE systemsetting, on a Ryzen 1800X, startup time of kwrite decreases as following according to perf stat: msec task-clock: ~480 ms to ~455 ms cycles: ~1.73e9 to ~1.65e9 Change-Id: I630a80e4bed2647d5bbd95247005aab7d0cb0363 Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
* QtNetwork: port remaining uses of QMutex::Recursive to QRecursiveMutexMarc Mutz2019-07-065-11/+8
| | | | | | | In one case, added NSDMI to avoid churning the ctor-init-list. Change-Id: I5587d5cb7e393f60ad29cb5186127304d27d1d46 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QtGui: port from QMutex::Recursive to QRecursiveMutexMarc Mutz2019-07-065-11/+9
| | | | | Change-Id: I1ce4fcfa1bfb9a89fe3ebe61d049b9b3100fd700 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QtNetwork: bearer: port from QMutex::Recursive to QRecursiveMutexMarc Mutz2019-07-066-8/+7
| | | | | | Change-Id: I691ecbaf9ea0796decbb48fd62b25d0a2941d979 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
* Port some trivial cases from QMutex to QRecursiveMutexMarc Mutz2019-07-068-20/+11
| | | | | | | In all of these cases, the effect of the change is local to one file. Change-Id: I3bda3aadee3b42e7797183c2330183390b92d1f2 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Short live QRecursiveMutex!Marc Mutz2019-07-063-16/+127
| | | | | | | | | | | | | | | Move the recursive mutex use case out of QMutex into a separate class, unsurprisingly called QRecursiveMutex. As an immediate benefit, 90% of the QMutex users now enjoy a constexpr QMutex ctor. This change prepares for a real split in Qt 6, so that both use-cases are no longer bundled up in one class. [ChangeLog][QtCore][QMutex] Added QRecursiveMutex as a replacement of QMutex(QMutex::Recursive). Change-Id: I79b8724e8a8ee65e4bd0f06acd76103fe4197b8c Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* Fix build without features.itemmodelTasuku Suzuki2019-07-063-1/+13
| | | | | | Change-Id: I1235bed395a47438bc18571e2331a3432e274dec Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de> Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
* Fix build without features.mimetypeTasuku Suzuki2019-07-061-1/+0
| | | | | Change-Id: I8c5521c5cfbc6c13c78d2bc8805fa5a021675b6c Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* Merge "Merge remote-tracking branch 'origin/5.13' into dev"Liang Qi2019-07-0518-41/+133
|\
| * Merge remote-tracking branch 'origin/5.13' into devLiang Qi2019-07-0518-41/+133
| |\ | | | | | | | | | | | | | | | | | | | | | Conflicts: .qmake.conf qmake/generators/makefile.cpp Change-Id: Ifb2633a69d0bf8cdf12d799c6259beefc279c49e
| | * CMake: Fix handling of static dependencies that have spaces in pathAlexandru Croitor2019-07-052-3/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The absolute paths of certain static dependencies can have spaces in them. The _qt5_$${CMAKE_MODULE_NAME}_process_prl_file fails to handle this, and simply replaces all spaces with semicolons, which obviously breaks the list of dependencies, and a consuming application fails to link with a message like: LINK : fatal error LNK1181: cannot open input file 'C:\Program.obj' This change partially restores the functionality that was added in 102e1822ffcdc9954d3c698f863734a8083e349c specifically the part that changes qmake to export an additional variable QMAKE_PRL_LIBS_FOR_CMAKE. This variable has the same content as QMAKE_PRL_LIBS except it uses a semicolon as a separator, so that CMake can correctly parse the separate lib entries. This is much cleaner than trying to parse the original QMAKE_PRL_LIBS variable with a complicated regular expression. Amends eda28621f6c1a68774719f382be53ec109123b18. Task-number: QTBUG-38913 Change-Id: I1d18fb779606505bc92320d8ce13232c7022e212 Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
| | * CMake: Fix prl and library names on macOS for debug configurationsAlexandru Croitor2019-07-051-6/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The paths to the libraries and prl files should have the "_debug" suffix for the debug configuration. This prefix is added to the TARGET when by qt_module.prf when doing a debug build, but not during a debug_and_release build. Make sure to strip the _debug suffix if it's there, and re-add it later always, to be consistent in both debug_and_release builds and in debug builds. Amends a12b6e7bf6688021c6af809d024958b59dfa3555. Task-number: QTBUG-38913 Task-number: QTBUG-75520 Change-Id: I29e88f2b991e2be06b23652d64edc768fa35a5ae Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
| | * Merge "Merge remote-tracking branch 'origin/5.12' into 5.13"Qt Forward Merge Bot2019-07-0311-30/+60
| | |\
| | | * Merge remote-tracking branch 'origin/5.12' into 5.13Qt Forward Merge Bot2019-07-0311-30/+60
| | | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: .qmake.conf Change-Id: I936be3c0df2b9845ff6a85eb3d4442cdabe63d37
| | | | * Mark QObject::deleteLater() as \threadsafeMarc Mutz2019-07-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because it is. It's just QCoreApplication::postEvent(), which is thread-safe. It also _has_ to be, because we recommend to use deleteLater() to delete QObjects that live in another thread: Quoting the ~QObject() docs: > Warning: Deleting a QObject while pending events are waiting to be delivered > can cause a crash. You must not delete the QObject directly if it exists in > a different thread than the one currently executing. Use deleteLater() > instead, which will cause the event loop to delete the object after all > pending events have been delivered to it. If deleteLater() is not thread-safe, it cannot be used for one of its intended purposes. Change-Id: I333d506b42bdfcdff00fe6cefa234c21865625a6 Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
| | | | * [docs] Fix issues in QRect/QMargin API docsMarc Mutz2019-07-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Fix grammar in op-(QRect, QMargin) - Correct shunk for grown in op-(QRectF, QMarginsF) Change-Id: Ia0dbd933cc9f6ed5e0dad05a27794c1135c794ed Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
| | | | * Fix compiler warnings when building with DEBUG defines setVolker Hilsheimer2019-07-021-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | Change-Id: I51fc7aae246916e585b21b4e7da1fc5a4ac392fd Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
| | | | * Skip flaky test on MacOS_10_12Dimitrios Apostolou2019-07-021-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the most flaky-pass test currently. It fails the first time it is run on MacOS_10_12, but succeeds all the following times. This happens extremely often, so disable it until the issue is resolved. Task-number: QTBUG-76566 Change-Id: I94359eceb91c3b958930424e6c8b5957fb3f1252 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
| | | | * Update visible window's alpha when toggling WA_TranslucentBackgroundVolker Hilsheimer2019-07-022-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QWidgetPrivate::updateIsTranslucent sets the surface format of the window with the alpha based on the translucency attribute, so we need to call this function when the attribute value changes. The test can confirm that the window's requested surface format has changed, we can't rely on what is actually set, and don't have to rely on hard-coded values like 8bit alpha. While WA_NoSystemBackground needs to be set for WA_TranslucentBackground to have an effect, we can't clear the attribute when clearing translucency (as it might have been set explicitly). Change-Id: I238d6930b7e0488397467a4e035b5f530566a1ff Fixes: QTBUG-60822 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
| | | | * QSocks5SocketEngine: account for in-transit signal when waiting for readMårten Nordheim2019-07-022-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When calling waitFor{ReadyRead,Disconnected} it will wait for data but if the data is already received and the read notification has been queued (and there's no more data coming in) it will return false. By checking if a read notification has been queued and then handling this we can easily take care of this scenario. Fixes some flaky tests which missed the read data in waitForDisconnect and similar. Fixes: QTBUG-38385 Change-Id: Ic05d59883c1175783e56ff1822b6636c35aec874 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
| | | | * QSocks5SocketEngine: pass data to application when connectedMårten Nordheim2019-07-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we end up in the connected state then we should pass on any remaining data immediately instead of waiting until the next time we get a read notification. The other `case`s in the switch might be able to do something similar, but I don't want to introduce that logic now in case it breaks something else, the Connected branch is small and simple to deal with. Should severely reduce flakiness with socks proxy in CI under pressure. Task-number: QTBUG-76367 Change-Id: I0965d4c62a29a25ce6b8dd60862a464279aef0b4 Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io> Reviewed-by: Ryan Chu <ryan.chu@qt.io>
| | | | * Fix directory separator of QMAKE_INCDIR_VULKANJoerg Bornemann2019-07-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Like in Qt code itself we should use forward slashes consistently. This enables the vulkan test to run on Linux for MinGW cross-compilation. Task-number: QTBUG-76660 Change-Id: Ifc6dec11bac3c3769d5d06e49da529f66f7b5843 Reviewed-by: Kai Koehne <kai.koehne@qt.io>
| | | | * Bump versionFrederik Gladhorn2019-07-011-1/+1
| | | | | | | | | | | | | | | | | | | | Change-Id: Ic4a8c031d1de3dd887fb6f135035ccb2ec9a37b3
| | | | * QRandomGenerator: assert that bounded() calls have correct argumentsThiago Macieira2019-06-282-8/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise, the math will fail badly. Documentation improved to reflect reality. Change-Id: I9e3d261ad9bf41cfb2b6fffd159085cd38e3c388 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
| | * | | Add custom verb support for WASM HTTP requestsFelix Barz2019-07-031-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The QNetworkReply implementation for Qt for WebAssembly now supports usage of the QNetworkAccessManager::sendCustomRequest, making it possible to send requests with custom verbs. [ChangeLog][QtNetwork][QNetworkAccessManager] Fixed QNetworkAccessManager::sendCustomRequest for Qt For WebAssembly. Fixes: QTBUG-76775 Change-Id: I9394ffef110fce4ed2c877893631bedc7631f71e Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
| | * | | Handle multiple font-families in <font> face attributeAllan Sandfeld Jensen2019-07-032-1/+34
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This seems to be a common use case, and to be expected from pastes of MSWord documents. Change-Id: I5849d7f51408e76f15a0b03c2118649f118af1d6 Fixes: QTBUG-66794 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Lars Knoll <lars.knoll@qt.io>
| | * | QPluginLoader: fix failing test comparing the Qt versionThiago Macieira2019-07-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We stopped storing the patch release number of Qt in the plugin metadata in commit 7bd79b3cffbbbece23867c5e111a3dd2ebcad016 (5.13), to make it simpler to parse the validity of plugins before decoding the CBOR payload. Fixes: QTBUG-76855 Change-Id: I6aed4df6a12e43c3ac8efffd15adbbf83e928866 Reviewed-by: Liang Qi <liang.qi@qt.io>
| | * | Bump versionFrederik Gladhorn2019-07-011-1/+1
| | | | | | | | | | | | | | | | Change-Id: Ieb9a694d44503789664a6098c4fb14eb940337fe
* | | | Fix build without features.libraryTasuku Suzuki2019-07-061-1/+0
| | | | | | | | | | | | | | | | | | | | Change-Id: I3ce4a8e4c6488737115f2f16bfd8f0e1fc5fc4fa Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* | | | Fix build without features.actionTasuku Suzuki2019-07-062-1/+2
| | | | | | | | | | | | | | | | | | | | Change-Id: Ia776cdcb36d07bb89f39c631029458adf2187d90 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* | | | tst_QTcpSocket::hostNotFound Only expect failure for the http proxyMårten Nordheim2019-07-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When I added the QEXPECT_FAIL the http proxy was the only one. That's no longer true after fixing the SOCKS proxy, so let's make the condition more specific. Change-Id: I1eaa5117d5d0219e04cbd091ec54e522fe7b5509 Reviewed-by: Dimitrios Apostolou <dimitrios.apostolou@qt.io> Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
* | | | Remove usages of QSysInfo's deprecated APIsSona Kurazyan2019-07-0512-12/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Replaced QOperatingSystemVersion::WindowsVersion, QSysInfo::windowsVersion(), QSysInfo::macVersion(), QSysInfo::MacintoshVersion with QOperatingSystemVersion::current(). - Added QOperatingSystemVersion::WindowsVista for convenience, as it is used in lots of places. Change-Id: If9c4ac496005b2e70b5c70be160747afa74b98c1 Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
* | | | Remove usages of deprecated APIs of corelibSona Kurazyan2019-07-0520-71/+498
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Replaced the usages of deprecated APIs of corelib by corresponding alternatives in the library code and documentation. - Modified the tests to make them build when deprecated APIs disabled: * Made the the parts of the tests testing the deprecated APIs to be compiled conditionally, only when the corresponding methods are enabled. * If the test-case tests only the deprecated API, but not the corresponding replacement, added tests for the replacement. Task-number: QTBUG-76491 Task-number: QTBUG-76539 Task-number: QTBUG-76541 Change-Id: I62ed4a5b530a965ec3f6502c6480808f938921aa Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* | | | Initialize variables to make coverity happyLars Knoll2019-07-051-3/+3
|/ / / | | | | | | | | | | | | Change-Id: Id574a114cbed04927ae380c6d97027cf4b351032 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* | | Fix qFindTestData() to work with relative resource pathsJan Arve Sæther2019-07-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the resource path 'base' was relative it would enter condition 3) in qFindTestData() and it would actually find the nonsensical "://data" as a viable candidate. We don't want to enter that case, but rather enter the subsequent ('Try resources') case Change-Id: I1928ba02c941e23fee4fec9052a1981e46fa59b7 Task-number: QTBUG-73512 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
* | | Do not access invalid QAccessibleInterfaceJan Arve Sæther2019-07-051-1/+1
| | | | | | | | | | | | | | | | | | | | | Noticed this when running Qt Creator against dev Change-Id: Ie75b2e0f2a77033ce0455d7ee3304193aa6e511c Reviewed-by: André de la Rocha <andre.rocha@qt.io>
* | | Fix build without feature.xmlstreamreaderTasuku Suzuki2019-07-053-37/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit introduces a new feature called vkgen for the tool which depends on xmlstreamreader. Note that when features.vkgen is disabled, vulkan.pri will generate dummy qvulkanfunctions.h and qvulkanfunctions_p.h because buildsystem needs them. Task-number: QTBUG-76159 Change-Id: I03d526a0fd76a2d8b531940f37538cead109d9d3 Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
* | | Fix build without features.inotifyTasuku Suzuki2019-07-051-1/+1
| | | | | | | | | | | | | | | | | | | | | -no-feature-inotify was ignored on Linux Change-Id: I65bab5b31740f10eacea6735119702a79df5c263 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* | | Testlib: Reset the global benchmark data only if it matchesUlf Hermann2019-07-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | You can create multiple instances of QBenchmarkGlobalData as the ctor is public. The qmltest plugin does create a static one, but only conditionally assigns it to the singleton pointer. On shutdown the plugin is removed and the QBenchmarkGlobalData::current should only be reset by the dtor if it's actually pointing to the same object. Change-Id: I616c1ccf6f7a00abf1de342094da88481510bc7b Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io> Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* | | QSet docs: don't use std::find for lookupsGiuseppe D'Angelo2019-07-041-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | That code would normally call for QSet::find instead (Uniform Container Find cannot come soon enough). Since the code is showcasing a STL algorithm usage, port it to std::find_if to showcase a real use case. As a drive-by: fix the usage of endl with std::cout. (Ok, it's just a variable called "cout", and I'd argue that in example code "cout" is not the name of a QTextStream). Change-Id: I8686178b33c31552eb4d909a4089453d60994b79 Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
* | | QApplication::topLevelWidgets(): Avoid allocation of listFriedemann Kleint2019-07-041-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use the QSet QWidgetPrivate::allWidgets directly instead of calling QApplication::allWidgets(), which allocates a QList. Change-Id: I16d289030cecefae7811d4b2c94f865f46f700d5 Reviewed-by: Marc Mutz <marc.mutz@kdab.com> Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
* | | Fix build without features.cursorTasuku Suzuki2019-07-042-0/+6
| | | | | | | | | | | | | | | Change-Id: Id7617e03f86a4dd7d1ada37c91cf792bca7f1d6d Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* | | Use QRegularExpression for filtering in QDirIteratorLars Knoll2019-07-031-10/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce our usage of QRegExp in preparation towards deprecating it. This also brings it in line with QDir that already uses QRegularExpression for filtering. Keep the old QRegExp based code around in bootstrapped mode, since qmake uses this functionality. Change-Id: I98b9d2875c30e17e406b6711dfe3265ba37624ac Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
* | | dumpcpp: Run dumpcpp if the generated files do not exist at qmake timeAndy Shaw2019-07-031-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By running dumpcpp if the files do not exist at qmake time we enable the dependency finder to find these files and set up the dependencies as appropriate. Since other changes ensure that dumpcpp will be called at the right time when building if the typelib changes, we no longer need to have the generated files dependent on the objects. As a result, we are able to prevent it from unnecessarily rebuilding everything if certain files are updated. Change-Id: I334f48c7a980aa8b893c14cb2a4687d3b2b7a4b9 Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
* | | qtlite: Fix build with -no-feature-commandlineparserMikhail Svetkin2019-07-034-0/+10
| | | | | | | | | | | | | | | | | | | | | Change-Id: Ie7b7b119073691c0d3b6358f876298fc86cfe9e9 Reviewed-by: Tasuku Suzuki <tasuku.suzuki@qbc.io> Reviewed-by: Timo Aarnipuro <timo.aarnipuro@qt.io> Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-06 07:33:28 +0000