| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
| |
When support for MariaDB was added in
947704cefe9e8723c8c9bb332268dcedb1ea1060 the key 'MARIADB' was not added
to the json file.
Change-Id: I8565a4a3804028806c1d2ff992329ece24de3fc5
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
|
|
|
|
|
|
|
| |
Task-number: QTBUG-80906
Change-Id: I9beab78d8fe8dfc712969f65792f50360a890287
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The controls as drawn by the UxTheme library are too tiny; add an
additional correction factor to
QWindowsXPStylePrivate::drawBackgroundThruNativeBuffer(), allowing
to scale the result via the QImage.
For the MDI button size, calulcate the factor by comparing the
theme size to the subcontrol rectangle.
Fixes: QTBUG-75927
Change-Id: Iab0911b51d13f3de0d9278a32cb4598ce709d745
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
|
|
|
|
|
| |
Change-Id: I7b9d480008167c071bf925d655eb97ef437bc206
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|
|
|
|
| |
Change-Id: Ie6f151cb099151616f83ea8d5e11e6625bedeb8c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Partially reverts 4f077b7e5ff1081afc0e362bdab6522c2b7ee43b.
Can't overload with forwarding references and lvalue references. Use a single
forwarding reference overload, but take care of not trying to create a
QScopeGuard of reference type and forward instead of moving.
Add tests to ensure calling with both lvalues and rvalues is possible.
Change-Id: Ia034afe0a8feb08246c2c7c154a85cae37421c98
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When rendering the glyphs into the texture, we need to translate
by the margins (this is accounted for later). The visible
symptom for this was that when the DirectWrite engine was used
all glyphs would be two pixels to the left (which could be seen
when placing a cursor at the glyph for instance, and sometimes
the edge of the glyph was clipped).
Change-Id: Ife72ae8b5663cf43448ae0f8323a459210609b4d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
| |
to High DPI
Scale the size according to DPI, fixing the buttons being too small
on High DPI screens with Qt High DPI scaling turned off.
Task-number: QTBUG-75927
Change-Id: Ibdcfa994164ca7bb72a831f1afe1267b4d5010cf
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
|
|
|
|
|
|
|
|
|
| |
Use static helpers to populate the XPTheme struct.
Task-number: QTBUG-75927
Change-Id: I49201f56fd5a4ef7eeb86c01dfc858022f465792
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
|
|
|
|
|
|
|
|
|
| |
We were only doing half of what qCleanup was doing in the
exception case, and in an inconsistent order. There's no
reason not to just call qCleanup to align the behavior.
Change-Id: Ic4e63afb4733de5b01a79272cca8908fca3de762
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|
|
|
|
| |
Change-Id: If92845ccb044becee136c7791fdb3cfe3641b28d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|
|
|
|
| |
Change-Id: I54bb2c3dda731e1fd6c7e909aa30a3cedb53612b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
| |
The debuggerPresent() function was used both to decide whether we should
print our own stacktrace, and if we should start the watchdog timer, but
checking for the macOS crash reporter only applies to the former usecase.
The crash reporter check has now been split into a separate function, only
used to decide whether we should print our own stacktrace or not.
Change-Id: I282aa57a51c14b07d3cbd547b551b6bf81b61897
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
|
|
|
|
|
|
|
| |
QtWayland requires this resource.
Change-Id: I41f83d93582bfe7c471208e8ca844e24dc2c6da5
Reviewed-by: Dan Cape <dcape@qnx.com>
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
| |
The change to using setters left a quirk from the previous un-mutable
design where you couldn't set values on an invalid color space and
create a valid one.
This changes that so it works as expected for an imperative API, but
is also needed for the declarative QML bindings.
Change-Id: I246cfc38b364b156238151c42c1df82a3f1cc9d3
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
|
|
|
|
|
|
|
|
|
|
| |
This makes it easier to create one without having to create
a derivative class. The patch also adds a path to avoid using
QRunnable directly in QThreadPool.
Change-Id: I9caa7dabb6f641b547d4771c863aa6ab7f01b704
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
|
|
|
|
|
|
|
|
|
|
| |
The calendar is ignored, so adding these methods was a mistake.
[ChangeLog][QtCore][QLocale] Deprecated toTime() variants taking a
calendar. The calendar is ignored in time parsing.
Change-Id: I79fa994ce88f13fdb931163b447eb1a9ad655c09
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The string-returning methods were in any case delegating to either a
local static or QLocale methods that delegate to their calendar
variants, so do the default-calendar step early and reduce the number
of distinct code-paths, along with the gross number of lines of code.
In the process, short-cut past QDate::toString() when we can save its
switch and go direct to the toString{Text|Iso}Date() it's calling.
Tidy up somewhat in the process.
Change-Id: I8ba70b29ef9e8b6553c41310ebb2b63ec5570bb9
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
| |
Qt 6 shall remove all locale-dependence from Q(Date|Time)+.
Task-number: QTBUG-80441
Change-Id: Iebaaa2bd776bccfe0d73c15f36cbdd456b71ca59
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We missed a few, so complete the general scheme of accepting an
optional calendar, where it would be relevant.
[ChangeLog][QtCore][QDateTime] Added some missing QCalendar variants
of QDateTime::toString(). Included docs for QCalendar variants in both
QDate and QDateTime.
Change-Id: Ief7b4dada73d7a4055b75d8b47ff4d2e310ce738
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
|
| |
[ChangeLog][QtCore] QCalendar::monthsInYear(QCalendar::Unspecified)
now returns maximumMonthsInYear(). QCalendar::daysInYear() now makes
clear that its handling of unspecified year is undefined.
Change-Id: Ifef8723193868c666f6afeb7f190af4929d30dea
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Internally this is already supported by all backends. The frontend was just
not exposing addressW, instead defaulting to the (arbitrarily chosen) ClampToEdge.
Add the parameter to newSampler(), but make it optional, defaulting to the more
natural Repeat (because that's what one would get with OpenGL for WRAP_R by default)
Change-Id: I0b991d8b649db37d4da86ac8e98ab7845601cf67
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
|
|
|
|
|
|
|
|
|
|
|
| |
It needed re-implemented in terms of the new API (in case QTime(0, 0)
was skipped, on the date in question, by a spring-forwrd), which makes
it redundant (and supports choice of spec and zone or offset, which it
did not).
Change-Id: I1e3c3e794632c234f254be754ed6e4ebdaaaa6bc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
|
|
|
|
|
|
|
|
|
| |
The support for QNetworkConfiguration was deprecated in 5.10 but the
documentation was still alluding to the functionality.
Change-Id: I7597388c646196fb4744d7bac4f890ca582c5b75
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
|
|
|
|
|
|
|
|
|
| |
Don't do gamma correction at image decoding time, it can be a whole
lot more than just a simple gamma function, so it is better to use
QColorSpace and QColorTransform.
Change-Id: Iebc960bad6ecdd878240be965699d2df869572ad
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
|
|
|
|
|
|
|
|
|
|
|
| |
When deprecating reverse iteratation for QHash the macro defining
QHashIterator was expanded but QT_NO_JAVA_STYLE_ITERATORS was
unfortunately forgotten. This patch brings it back.
Amends dbb54805f63f9ed68d84fe090d608872f16170d2
Change-Id: I7b1912a13f6f8d2446c1f61a1c4a19afb2f28993
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
| |
With Class Template Argument Deduction users might want to use the constructor
itself instead of a separate helper function. In both cases it's possible to let
the compiler deduce the template arguments.
Try to make the usefulness of the helper function in the absence of CTAD still
clear in the documentation.
Change-Id: I9b07983c1fb276a6dd9e7ed4c3e606764e9b68ca
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This implements the operation for Windows, macOS, and Unix, for now
only as a private API (since QFileSystemEngine is private). This adds
the capability as a testable function; public API to be agreed on and
added in a separate commit.
The Unix implementation follows the freedesktop.org specification [1]
version 1.0.
[1] https://specifications.freedesktop.org/trash-spec/trashspec-1.0.html
On macOS and Windows, native APIs are used, with each having some
limitations:
* on macOS, the file in the trash won't have a "put back" option,
as we don't use Finder automation, for the reasons provided in the
comments
* on Windows, we might not be able to use the modern IFileOperation
API, e.g. if Qt is built with mingw which doesn't seem to provide
the interface definition; the fallback doesn't provide access to
the file name in the trash
The test case creates files and directories, and moves them to the
trash. As part of the cleanup routine, it deletes all file system
entries created. If run on Windows without IFileOperations support,
this will add a file in the trash for each test run, filling up
hard drive space.
Task-number: QTBUG-47703
Change-Id: I5f5f4e578be2f45d7da84f70a03acbe1a12a1231
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
| |
In Qt6 QNAM will no longer use bearer in any way so we deprecate it now.
Also mark bearermanagement-conditioned sections for removal in Qt6,
the _q_networksession property is part of how QNAM passes the
QNetworkSession around.
Task-number: QTBUG-81609
Change-Id: I04aad9dd96482c6822dffba1b9af7aa58961149c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The session we cache at the end of a handshake is non-resumable
in TLS 1.3, since NewSessionTicket message appears quite some time
after the handshake was complete. OpenSSL has a callback where
we can finally obtain a resumable session and inform an application
about session ticket updated by emitting a signal. Truism: OpenSSL-only.
[ChangeLog][QtNetwork] A new signal introduced to report when a valid session ticket received (TLS 1.3)
Fixes: QTBUG-81591
Change-Id: I4d22fad5cc082e431577e20ddbda2835e864b511
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
|
|
|
| |
The changed function was added in September 2019 in 5.15 branch before
the new overload was added and the old one was deprecated, so we can
freely change it.
Amends 1068d579ee848edf08db5ac611b292c76c30a39b
Change-Id: Iff9d72c26ce557c28b188e1754daa03fd061d531
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|\ |
|
| |\
| | |
| | |
| | | |
Change-Id: I98b1a5a11ece3957a1115c1d9be8841759206ffe
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add a link to https://www.khronos.org/opengl/wiki/Array_Texture.
Fixes: QTBUG-49802
Change-Id: Ic740dd758c41a8f3e471a503bd2d02f6d3096f50
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
|
| | |\
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Conflicts:
mkspecs/features/create_cmake.prf
Done-With: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Change-Id: I2ecb9fdca06fe687be8ab3457a58dd81e5e81c4c
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The local refs are released by the JVM when we exit the function, but if
we need tons of local refs, JVM will not be happy.
Fixes: QTBUG-81077
Change-Id: Ic38a5be1a563cb9c2465f9f902ff6ae6c61e698b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
session lock
Check on currentScreen in QWindowsWindow::checkForScreenChanged().
Fixes: QTBUG-80436
Change-Id: I19e34b9e2c32c9cfc8e5e5b758783c0ab89d5556
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Fixes: QTBUG-81565
Change-Id: I6bf2364e696315e5262d1abfa2f0b6947f14a33b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This reverts commit c7fec68e1936576070d0fbac6cf40b818366d298.
This commit introduces a behavioural change within 5.14.
It's designed to special case plasma with a fix, but in practice it will
cause us more problems.
It will break:
- font size on plasmashell and kwin on xcb which do not use Qt scaling
- xwayland on projectors/headless tests
The original bug of double scaling that this was trying to fix is fixed
by b31852c4caa36cc564e25adbdacfa534e1dfe7c0 which is in 5.14.1 which
works in combination with the environment variables we set in plasma so
this is not needed.
Fixes: QTBUG-81532
Change-Id: I2f1b8ae4aecf7b80be4dbee812e6b4a64244fb1f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Commit bf131e8d2181b3404f5293546ed390999f760404 removed it and it's a
good thing.
Change-Id: Idc3fae4d0f614c389d27fffd15ea245420035e66
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Fixes: QTBUG-80884
Change-Id: I90bc3100aeb85089256ce414434c98753e02c79c
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
I added the code in commit 5219c37f7c98f37f078fee00fe8ca35d83ff4f5d to
find libraries in a haswell/ subdir of the main path, but we only need
to do that transformation if the library is contains at least one
directory seprator. That is, if the user asks to load "lib/foo", then we
should try "lib/haswell/foo" (often, the path prefix will be absolute).
When the library name the user requested has no directory separators, we
let dlopen() do the transformation for us. Testing on Linux confirms
glibc does so:
$ LD_DEBUG=libs /lib64/ld-linux-x86-64.so.2 --inhibit-cache ./qml -help |& grep Xcursor
1972475: find library=libXcursor.so.1 [0]; searching
1972475: trying file=/usr/lib64/haswell/avx512_1/libXcursor.so.1
1972475: trying file=/usr/lib64/haswell/libXcursor.so.1
1972475: trying file=/usr/lib64/libXcursor.so.1
1972475: calling init: /usr/lib64/libXcursor.so.1
1972475: calling fini: /usr/lib64/libXcursor.so.1 [0]
Fixes: QTBUG-81272
Change-Id: I596aec77785a4e4e84d5fffd15e89689bb91ffbb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
| | | |\
| | | | |
| | | | |
| | | | | |
Change-Id: Ie90edfd16f48e1907fd18288473ac403f62b9032
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Task-number: QTBUG-80916
Change-Id: I87e74da0ce454e56b5fe94d9db3693a587d35edf
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
In 5.13, isActive() would become true only if there
was a scale factor >1 present. This was accidentally
changed in 5.14, where isActive() becomes true whenever
e.g. AA_EneableHighDpiScaling is set, no matter the actual
scale factor values.
Change-Id: Iacbe2010cddbc3b9015ac24004ae2fe417d4f434
Fixes: QTBUG-80967
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
|
|/ / / /
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
On the mac, the push button's bevel doesn't cover the entire widget
rectangle, but is smaller to leave space for focus frame, shadow, and
in general to meet style guidelines. Without this change, a click
anywhere inside the widget would activate the button.
QAbstractButton::hitButton can be reimplemented to limit the area in
which the button is triggered. However, getting the rectangle also
requires an addition to QStyle, so that we can query
QStyle::subElementRect for the actual area the button's bevel covers.
As a side effect, tests that use QPushButton and assume that it
responds to clicks at position 0,0 have to be fixed so that they
don't fail on mac.
Change-Id: I01b60a763bccf39090aee5b2369af300f922d226
Fixes: QTBUG-81452
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This can be used to create custom client side window decorations.
Refactors the xcb implementation to use edges instead of corners and we now use
the last mouse position for `root_x` and `root_y` in the `_NET_WM_MOVERESIZE`
event. Touch has also been changed, so just pick a point that's currently being
pressed.
The workaround for QTBUG-69716 has now been moved to QSizeGrip, as the comment
in the bug report says that it should ideally be fixed at the widget level.
On Windows, we no longer abort when GetSystemMenu returns false. I assume this
code was added to check whether the window didn't have any decorations and not
resize in that case. However, since the point of this patch is to let windows
without native decorations resize/move, it makes most sense to remove the
check.
Adds a manual test, which calls QWindow::startSystemMove and startSystemResize
on touch and mouse events.
[ChangeLog][QtGui] Added API for starting interactive window resize and move
operations handled by the system.
Fixes: QTBUG-73011
Change-Id: I7e47a0b2cff182af71d3d479d6e3746f08ea30aa
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
|
|\ \ \ \ |
|
| |\| | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Conflicts:
src/gui/image/qpnghandler.cpp
Change-Id: I8630f363457bb613d8fb88470a71d95d97cdb301
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Add the Qt-specific properites to the list.
Fixes: QTBUG-37938
Change-Id: I178de6cd5e17cd282a20ccee9ce8355f540c38a1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|