summaryrefslogtreecommitdiffstats
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
* Use native visual ID when creating GBM surfaces for KMSPaul Olav Tvete2018-10-123-6/+22
| | | | | | | | | | According to the Khronos documentation, gbm_surface_create() will give a BAD_MATCH error if the format does not match the EGL_NATIVE_VISUAL_ID. Newer drivers have started to enforce this. Change-Id: I61360b0f52965ad8057e7de8f824ffca64fea904 Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io> Reviewed-by: Dominik Holland <dominik.holland@pelagicore.com>
* Ssl: Fix contrived crash when calling resumeMårten Nordheim2018-10-101-0/+4
| | | | | | | | | | If you, directly after connecting, call "ignoreSslErrors()" followed by "resume()" then you will most likely crash. It is very contrived and there's no reason to do this. Change-Id: I949a303238f5012296d0e84eb76173764eb9de2e Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
* Update the DNS public suffix list from publicsuffix.orgEdward Welbourne2018-10-091-13288/+13692
| | | | | | | | | | It has had some changes and should be kept up to date. Fixes: QTBUG-70386 Task-number: QTBUG-70852 Change-Id: I868a558811c34cf5a800c3087a0ca96e7fb49b1a Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io> Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
* [macOS] Fix position of sheets when using unifiedTitleAndToolBarOnMacAlexandru Croitor2018-10-081-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modal sheets are supposed to appear below the toolbar if a toolbar exists, or below the title bar if a toolbar doesn't exist. In the unified title and toolbar mode, sheets should to appear directly below the toolbar, if the toolbar is positioned at the top of the window. Code-wise we achieve that by calling setUnifiedTitleAndToolBarOnMac on a QMainWindow, which results in adjusting the top content border of the NSWindow via [NSWindow setContentBorderThickness:forEdge], which Cocoa uses to position a modal sheet (the sheet top edge is aligned with the top edge of the content view + the Y border thickness value). The issue is that because NSWindow.titlebarAppearsTransparent is set to YES, for sheet presentation purposes, Cocoa considers the content view to begin at the position of the top left corner of the frame (where the title bar is), and thus sheets appear somewhere in the middle of the unified toolbar. To fix that we need to account for the title bar height in the border thickness value. Compute the title bar height from the window frame height - window content view height, and add it to the top border thickness value. Amends 8ac9addd946637401e4685c6e91d1a3cd5b2d768 Change-Id: Icf85c513035cc3710b438e60eb14dc04c5bbaced Fixes: QTBUG-65451 Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
* Fix DejaVu fonts URLSergio Martins2018-10-061-1/+1
| | | | | | | | http://dejavu-fonts.org is something else nowadays Change-Id: Idb03b864fb145b016ce4ae1a2f0df02ff80280a8 Reviewed-by: Rolland Dudemaine <rolland.dudemaine@esol.com> Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
* Fix ICE on QNX 6.6Sergio Martins2018-10-051-1/+1
| | | | | | | qabstractitemmodeltester.cpp:223:31: internal compiler error: in expand_expr_real_1, at expr.c:9170 Change-Id: I098c1bdf706512c91c649205f4675de0ca374227 Reviewed-by: David Faure <david.faure@kdab.com>
* Doc: Describe behavior of QSslConfiguration::caCertificates() on iOSLeena Miettinen2018-10-041-0/+4
| | | | | | | | | | In iOS, the system certificates cannot be accessed, so this function will return an empty list for the default configuration. Task-number: QTBUG-60407 Change-Id: I0d691a0dd5e6367594e71c7ebccfbdc866d4a3f0 Reviewed-by: Edward Welbourne <edward.welbourne@qt.io> Reviewed-by: Andy Shaw <andy.shaw@qt.io>
* Windows QPA: Fix WM_NCHITTEST not being sent to QAbstractNativeEventFilterFriedemann Kleint2018-10-021-1/+0
| | | | | | | | | | | The message is not sent to the QAbstractEventDispatcher, so it needs to be excluded from the list of input messages not sent to QAbstractNativeEventFilter. Amends a0a22037cdacbf51a2db560ff902a5a341561b15. Fixes: QTBUG-70873 Change-Id: Id84d73b46e8954867c06a4ddf5dc9e536ecd897e Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
* Use update() instead of repaint() when displaying a new messageAndy Shaw2018-10-021-1/+1
| | | | | | | | | There is no advantage to using repaint() here, so using update will give a performance improvement. Change-Id: Icc6a28dfc12dffb8ea3df0300fd14c66c775bf16 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
* QDateTimeParser: avoid using an invalid hour by defaultEdward Welbourne2018-10-021-4/+25
| | | | | | | | | | | | When a time-zone does a spring-forward, skipping an hour (either to start DST or to move its standard time), there's an hour that doesn't exist on the day in question. That hour can be the first hour of the day, in which case using 0:0 as the default time is broken. So catch this case and use the first time that day that makes sense. Fixes: QTBUG-70823 Change-Id: I23dae9320a3cdd2c988841a7db1b111edb945730 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Scale seconds by a thousand to get millisecondsEdward Welbourne2018-10-021-2/+2
| | | | | | | | | QTimeZonePrivate::dataForLocalTime()'s handling of times in a spring-forward gap added offsets in seconds to values in milliseconds. Supply the missing factor of a thousand. Change-Id: Ic32d87675f902e1c7fd85025fb70c8272a4f2db2 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* zlib: Fix spelling of licenseKai Koehne2018-10-021-1/+1
| | | | | | | Follow spelling convention at https://spdx.org/licenses/Zlib.html Change-Id: Ib25b98cf7f3a052ec25ba6924748a962733e2ed8 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
* fix HTML subset documentation is not very readable on smaller screensAndrew O'Doherty2018-09-301-8/+6
| | | | | | | | | | | | | | When viewing "Supported HTML Subset" documentation in Qt Creator (in QTextBrowser), the first table that lists all tags is quite unreadable (see images). It happens because there is a code snippet in Comment column for tag "meta" that uses pre-formatted text. Because it should not be wrapped automatically, it ends up pushing first 2 columns into their minimum size, which mostly makes them take a single letter per row. Task-number: QTBUG-64126 Change-Id: I08bf6f61806d52e7a2f47bdbed1b5950825ce739 Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
* Fix QUrl::matches for when removing authority parts (other than host)Thiago Macieira2018-09-291-8/+8
| | | | | | | | | | | | | | | | | | | QUrl::RemoveAuthority is RemoveUserInfo | RemovePort | 0x10, so the condition if (options & QUrl::RemoveAuthority) would match if any of the other bits for the username, password or port were set, which meant we would skip the host comparison. Ditto for username and RemovePassword. [ChangeLog][QtCore][QUrl] Fixed a bug that caused QUrl::matches to incorrectly compare two URLs with different hostnames or different usernames as equal, if certain QUrl::RemoveXxx options were passed. Change-Id: I015970a03b874898bba7fffd155856ab9d6cb1be Fixes: QTBUG-70774 Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
* QCommandLineParser: Ensure that an option text ends with a newlineAlexander Akulich2018-09-281-1/+5
| | | | | | | | | | | | | | Before this change we inserted newline only if an option has a description and ended up with an arbitrary long line with all options. [ChangeLog][QtCore][QCommandLineParser] Fixed a bug that caused the help output to show two options or more in the same line if the options didn't have a description. Task-number: QTBUG-70174 Change-Id: Id54b9ae13ee596869e4dc14e09301aea19eed2f8 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* SSL: Don't write to closed socket or write to deallocated bufferMårten Nordheim2018-09-281-1/+6
| | | | | | Change-Id: I061848ae570b382d640f8e46a1c54aeaeddbd77d Fixes: QTBUG-61307 Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
* Android: fix log output patternLuka Modric2018-09-271-3/+1
| | | | | | | | | | Remove hardcoded android log pattern as this is already part of the message to match behavior on other platforms. Task-number: QTBUG-69450 Change-Id: I529b550114a2164beafe305f8392891c4ead88f0 Reviewed-by: Kai Koehne <kai.koehne@qt.io> Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
* Modernize the "filesystemwatcher" featureLiang Qi2018-09-2719-96/+70
| | | | | | Change-Id: If030b56ad97e047d89d442629262b4839df306d4 Reviewed-by: Edward Welbourne <edward.welbourne@qt.io> Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
* Fix QCompleter popups preventing the application from exitingAlexandru Croitor2018-09-261-1/+8
| | | | | | | | | | | | | | | | | Due to an implementation detail regarding setParent() and setWindowFlags(), if a QCompleter popup ends up being the last open window after closing the main window, the application would be prevented from exiting even after selecting an item in the popup. This is due to adjustQuitOnCloseAttribute() not being called when passing a Qt::Popup flag to setParent(parent, windowFlags). Use setWindowFlags() directly, which adjusts the quit on close attribute, and allows an application to exit properly. Change-Id: Ic4cff9504df268556d851e40d5ae08b7ed4dc3bf Fixes: QTBUG-69924 Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* Add QT_REQUIRE_CONFIG(ssl) to pre-shared key authenticatorTimur Pocheptsov2018-09-251-0/+2
| | | | | | | | | As it's done (albeit in old-style there) in other public QSsl-classes. Task-number: QTBUG-70604 Change-Id: If3cd9da0e8f8378fd29a80215cd889e459aa7bce Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io> Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
* QHeaderView: Don't unhide hidden sections on layoutChanged()Christian Ehrlicher2018-09-241-3/+0
| | | | | | | | | | | | | | When storing the persistent indexes within _q_sectionsAboutToBeChanged() there was a limit one how much persistent indexes should be stored due to performance concerns. This resulted in unhiding hidden rows. The rationale behind this was that storing persistent indexes is slow and that hiding a large amount of rows/columns should be done with a QSortFilterProxyModel. Fix it by removing the limit since it does not really hurt performance. Task-number: QTBUG-70633 Change-Id: I2311213c2b63c67e2210aa7f73f07d28dc0e47be Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
* Modernize the "datestring" featureLiang Qi2018-09-2420-70/+73
| | | | | | Change-Id: I2236a456fe3758d9054b22e36fe6316f3522d533 Reviewed-by: Lars Knoll <lars.knoll@qt.io> Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
* Modernize the "textdate" featureLiang Qi2018-09-244-18/+19
| | | | | | Change-Id: Ic0b6f13e17c301ed66d6a8297c242086c94ac87d Reviewed-by: Edward Welbourne <edward.welbourne@qt.io> Reviewed-by: Lars Knoll <lars.knoll@qt.io>
* QSslContext: Use 0 instead of TLS_MAX_VERSIONDmitry Shachnev2018-09-241-4/+4
| | | | | | | | | | | | | | | | | | | | | | | According to the SSL_CTX_set_max_proto_version manpage [1]: > Setting the minimum or maximum version to 0, will enable protocol > versions down to the lowest version, or up to the highest version > supported by the library, respectively. This should make it possible to use Qt Network with older versions of libssl than it was compiled against. In particular, use with 1.1.0 when compiled against 1.1.1. Also, one of OpenSSL developers is suggesting to remove TLS_MAX_VERSION from the public header in the future [2]. [1] https://www.openssl.org/docs/man1.1.0/ssl/SSL_CTX_set_max_proto_version.html#DESCRIPTION [2] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908567#59 Change-Id: Ie76054b917daa8e54d5c0156e848dbaca7bb8a82 Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com> Reviewed-by: Edward Welbourne <edward.welbourne@qt.io> Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
* Protect HSTS code for no-feature-settings buildTimur Pocheptsov2018-09-246-9/+54
| | | | | | | | | | | Under the hood we use QSettings to store HSTS policies. Qt configured with 'no feature settings' would fail to build then. For such builds, we fall back to in-memory only HSTS cache. Change-Id: I6df551d8c6c96d982080a51ce6b1bdce71d04b9f Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io> Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
* Export qt_open64 from QtCoreThiago Macieira2018-09-241-1/+1
| | | | | | | | | | Other libs use qcore_unix_p.h. qopenglprogrambinarycache.cpp:function QOpenGLProgramBinaryCache::load(QByteArray const&, unsigned int): error: undefined reference to 'qt_open64(char const*, int, unsigned int)' Change-Id: I44e7d800c68141bdaae0fffd155675d15eded2e4 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io> Reviewed-by: Eric Lemanissier <eric.lemanissier@gmail.com>
* Clarify docs regarding the states of a QFutureWatcher with no future setAndy Shaw2018-09-241-3/+5
| | | | | | Task-number: QTBUG-55554 Change-Id: I49b475a95d8ee65864cfa6d1024cb17cfe648b43 Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
* Document IAccessible2 versionKai Koehne2018-09-241-0/+1
| | | | | | | | The update to 1.3.0 was done in b2a7d865b2660d83fa899a213826525788d66b95. Change-Id: Ie4227d49a1ee0707abff754a5edbcb2b9663ccfe Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
* Fix integer overflow in very long sections in ELF objectsThiago Macieira2018-09-151-1/+1
| | | | | | | | | | | | The source is an ElfXX_Off, which is an unsigned 32- or 64-bit. That means any section bigger than 2 GB would cause an overflow when we assigned in m_stringTableFileOffset = strtab.offset; Change-Id: Ib47c56818178458a88b4fffd15546bd47a89894e Fixes: QTBUG-70560 Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
* Disable RGB64 backend for ARGB32 when it will be very slowAllan Sandfeld Jensen2018-09-141-0/+2
| | | | | | | | | | | Fixes a speed regression on ARGB32 painting on low end hardware introduced when it was switched to using the RGB64 raster routines. It turns out several of our embedded QPA targets use ARGB32 as native format. Task-number: QTBUG-69724 Change-Id: I6d7993c12da46a85b8354eb905930dae9602b5e6 Reviewed-by: Lars Knoll <lars.knoll@qt.io>
* sqlite: Fix QSqlError handling when opening/closing databaseFlorian Bruhin2018-09-131-7/+12
| | | | | | | | | | | | | | | | | | | Both sqlite3_open_v2 and sqlite3_close are documented to return an error code: https://www.sqlite.org/c3ref/open.html https://sqlite.org/c3ref/close.html However, those were ignored (other than checking whether the operation succeeded), causing QSqlError::nativeErrorCode() to always be "-1" when there was an error while opening/closing the database. Additionally, the error string needs to be read (via sqlite3_errmsg16) in qMakeError *before* d->access is set to 0, or the databaseText() will always be "out of memory" no matter what error actually happened. Task-number: QTBUG-70506 Change-Id: I75cbf178c9711442e640afd26c4502214d20c598 Reviewed-by: Andy Shaw <andy.shaw@qt.io> Reviewed-by: Simon Hausmann <simon.hausmann@qt.io> Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
* Detect when we are at the sentence boundaryAndy Shaw2018-09-131-2/+14
| | | | | | | | | | | | On Samsung devices this would cause it to always to captalize each word even if it was not a new sentence. Therefore we use QTextBoundaryFinder to determine if it is a new sentence or not. Task-number: QTBUG-69398 Task-number: QTBUG-66531 Change-Id: I24bf36f09a2570acfefd4343551cb1720ddc6279 Reviewed-by: BogDan Vatra <bogdan@kdab.com> Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
* Fix XCB on endian mismatched client and server with SHM offAllan Sandfeld Jensen2018-09-121-0/+2
| | | | | | | If SHM is disabled, that code path already does its own bswaping. Change-Id: I6c17f6c5c5502c8f89098d38d931b6b8f50b2640 Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
* bmp image handler: check for out of range image sizeEirik Aavitsland2018-09-111-0/+2
| | | | | | | | Make the decoder fail early to avoid spending time and memory on attempting to decode a corrupt image file. Change-Id: I874e04f3b43122d73f8e58c7a5bcc4a741b68264 Reviewed-by: Lars Knoll <lars.knoll@qt.io>
* Merge remote-tracking branch 'origin/5.11.2' into 5.11Qt Forward Merge Bot2018-09-097-32/+46
|\ | | | | | | Change-Id: I2fa26fa061cbf5d2bded203a299a19b7d1c31d0a
| * Revert "macOS: Force light theme on macOS 10.14+"Morten Johan Sørvig2018-09-031-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This does not really work: as soon as you build with the 10.14 SDK you opt-in to having updated palette management, which the Qt 5.11 series does not have. This leaves app developers with two ways to opt-out of dark mode: - Build with the 10.13 (or earlier) SDK. - Set NSRequiresAquaSystemAppearance in Info.plist This reverts commit 04671a80db32bd7fce470c50934cf60f2e8ffa70. Change-Id: I5c01b9965da45de914f699526ba0723837f36e1d Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io> Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
| * Make QMacCocoaViewContainer work againMorten Johan Sørvig2018-09-021-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The widget visibility state was set to explicitly hidden, which was preventing it from working correctly when its parent widget was shown. This regression was introduced by commit d7a9e08, which made QWindow::setVisible() call QWidget::setVisible(). QWindow::destroy() calls QWindow::setVisible(false), which means that the destroy() call in setCocoaView() would set the CoocaViewContainer to be explicitly hidden. Clear WA_WState_Hidden to work around this behavior. Task-number: QTBUG-67504 Change-Id: I77438fcd01f165f058eea178c214838bd4f27084 Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
| * QMacStyle: Make helper-NSViews layer-backedTor Arne Vestbø2018-08-281-5/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This prevents the view from triggering display of its superview when being temporarily added, which is both inefficient and causes issues when those dirty-rects are wrong due to the wrong frame position of the added view. The additional drawRect: calls and corresponding expose events resulting from the needsDisplay calls also caused repaint issues in Qt Widgets. QWidgetBackingStore doesn't seem to take the exposed region into account for an expose event, and will try to flush all dirty regions. Some of those may be outside the exposed region, and will be clipped away by the window system, never ending up on the screen, but with Widgets still thinking it has flushed all dirty regions. This is a separate issue, possibly solvable by setting the wantsDefaultClipping property on NSView to NO, but this needs further testing, so applying this commit as workaround makes sense, even if it's just hiding the real bug. Task-number: QTBUG-67998 Task-number: QTBUG-68023 Task-number: QTBUG-69990 Task-number: QTBUG-69740 Task-number: QTBUG-69292 Task-number: QTBUG-69332 Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io> (cherry picked from commit 38979332d0a66666ebd178bccd7e7a2b300a7e42) Change-Id: I4ef3fef29f749daa4f3a11fe9186ae77b359f966 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io> Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
| * Doc: Fix typos in QRectF documentationPaul Wicking2018-08-271-4/+4
| | | | | | | | | | | | | | | | | | Add missing 's'. Fixes: QTWEBSITE-823 Change-Id: I1acd3b7ae18982248bf3402fa5943ee95c1efdbe Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
| * Doc: Remove non-reentrant from QDomDocument::setContentPaul Wicking2018-08-271-2/+0
| | | | | | | | | | | | | | | | | | | | Following QTBUG-40015, QDomDocument::setContent is reentrant. This change updates the documentation accordingly. Fixes: QTBUG-69920 Change-Id: Id09e3541156f52d1a976afd02b410c263d3b3352 Reviewed-by: David Faure <david.faure@kdab.com>
| * Merge 5.11 into 5.11.2Frederik Gladhorn2018-08-275-22/+21
| |\ | | | | | | | | | Change-Id: I672bc167de3801c944315d92120c5e03da69e9c7
| * | Fix crash when combining QOpenGLWidget, QStaticText and Qt QuickEskil Abrahamsen Blomfeldt2018-08-242-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Under certain circumstances, if you had a widget with a QOpenGLPaintEngine, and drew QStaticText into this, and then later had Qt Quick access the same cache and try to resize it, we would get a crash because the resize function would have a pointer to the paint engine and try to access its shader manager (which would now be null, since this is outside the begin()/end() phase of the paint engine. The solution is to reset the paint engine pointer to null on the cache once it has been populated and it is no longer needed. [ChangeLog][QtGui][Text] Fixed a possible crash when combining QStaticText, QOpenGLWidget and Qt Quick in the same application. Task-number: QTBUG-70096 Change-Id: I7383ad7456d1a72499cfcd2da09a5a808d4b3eff Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* | | Document SLJIT part of pcre2Kai Koehne2018-09-062-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | src/sljit features the BSD-2-Clause license, not the BSD-3-Clause one. [ChangeLog][Third-Party Components] Added documentation for the SLJIT part of pcre2, which is available under the BSD-2-Clause license. Change-Id: Ie1e981ef6eab2c8d2960919b66ac85b29450f919 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* | | Revise an incorrect QVulkanWindow doc noteLaszlo Agocs2018-09-061-9/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Applying the transformation in question has no effect on the winding order. Rewrite that section. While all the examples are correct, clarify the rules for the geometry they use since the winding order varies. Fix up the triangle example code to use front=CCW for clarity (even though it does not matter much since culling is off there). Change-Id: Icb968c76cc9fa918a5608d3c66b4fccd5668175e Reviewed-by: Christian Stromme <christian.stromme@qt.io>
* | | QString: Fix snippet explaining "non-spaced numbered place markers"Andre Hartmann2018-09-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The snippet tries to explain the advantage of str.arg("Hello", QString::number(20), QString::number(50)); over str.arg("Hello").arg(20).arg(50); which only makes sense, if str contains the same formating sequence, namely "%1%3%2". That also matches the belonging comment. Amends 8481500f639e3d5e2259db57847a2e7068e30650 Task-number: QTBUG-44044 Change-Id: Ic2595107bc599c6d244ebf88184a5cc5569ed4f1 Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* | | Windows QPA: Fix missing accessibility info with WebEngineViewAndre de la Rocha2018-09-041-4/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems when a WebEngineView is parented by a window its accessible interface will not know its parent, which prevented the root of an UI Automation fragment from being found, causing missing accessibility info. This change adds a workaround to avoid this issue. Task-number: QTBUG-70199 Change-Id: Ia7cfc9f410c4f0ef3b5f9d1700748a9a3e29b7c2 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
* | | Doc: Move the literal code blocks to a separate fileVenugopal Shivashankar2018-09-032-15/+17
| | | | | | | | | | | | | | | | | | | | | | | | It's easier to override the code blocks this way. Change-Id: I98d40626a94fdb70a95c50332c2da141e9277070 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
* | | Document version number of pixmanKai Koehne2018-08-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The files match the ones in pixman 0.17.12 Task-number: QTBUG-69276 Change-Id: Idd03c6979456ad2cf4dcc2aee6986ebc95140937 Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
* | | Avoid conversion over RGBA64 for RGB32 LCD text blendingAllan Sandfeld Jensen2018-08-301-9/+49
| | | | | | | | | | | | | | | | | | | | | | | | Short-cuts the case where there is no gamma correction to avoid a conversion over RGBA64 and back. Change-Id: I100697a9f7a4b94283557b2c0eaa45e0eff81785 Reviewed-by: Lars Knoll <lars.knoll@qt.io>
* | | Doc: Check before including the \snippet from a .pro fileVenugopal Shivashankar2018-08-3013-1/+29
| |/ |/| | | | | | | | | Change-Id: Icc7552b46a2657c81958e40f33596ddeee045172 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-10 10:21:01 +0000