summaryrefslogtreecommitdiffstats
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
* QDateTime - Improve and expose Qt::OffsetFromUtcJohn Layt2013-08-285-151/+349
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Qt::OffsetFromUtc TimeSpec was made public in Qt 4.4 but the access methods were never made public in the apidox effectively meaning the feature was never used. The implementation was also incomplete and inconsistent. This change cleans up the implementation and exports new public API for using the TimeSpec using new method names consistent with the new QTimeZone support. This change increases the QDataStream Version number for Qt 5.2 to 15. The behavior of one constructor has changed slightly to be consistent with the rest of the feature, but this behavior was never documented. [ChangeLog][QtCore][QDateTime] Fully implement support for Qt::TimeSpec of Qt::OffsetFromUTC, added new methods for offsetFromUTC(), toTimeSpec(), and toOffsetFromUTC(). Task-number: QTBUG-26161 Task-number: QTBUG-29666 Change-Id: If3cc7fc9778ca2b831644408ae749448d5975a3a Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
* Remove Maliit input context.Robin Burchell2013-08-2812-1438/+1
| | | | | | | | | | | | Maliit upstream has its own IC which is more advanced than this one, as well as being supported. Change-Id: I4b820fc7f39468e53c113699c4c43c75d490f65b Reviewed-by: Simon Hausmann <simon.hausmann@digia.com> Reviewed-by: Jan Arne Petersen <jan.petersen@kdab.com> Reviewed-by: Lars Knoll <lars.knoll@digia.com> Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com> Reviewed-by: Pekka Vuorela <pvuorela@iki.fi>
* Android: added ApplicationState capability.Yoann Lopes2013-08-288-0/+64
| | | | | | | | | | | | The application state is tied to the QtActivity lifecycle. Mapping of states between Android and Qt is as follows: onResume --> ApplicationActive onPause --> ApplicationInactive onStop --> ApplicationSuspended Change-Id: Iefef08d6c7a7fde28fba1f4886882458cda6a0c0 Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
* QButtonGroup - add buttonToggled signalsThorbjørn Martsum2013-08-284-2/+39
| | | | | | | | | | | | | | | | QButtonGroup emits signals on clicked, pressed and released for buttons in the group, but for some (insuffienct) reason it did not emit anything for toggle (the only signal that it didn't emit anything for). This patch changes that, by adding handling of that signal to QButtonGroup. Task-number: QTBUG-14857 Change-Id: I88bcd7b060b78c7ff05ea1adf7baaddfe6d463be Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com> Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
* Add QCommandLineParser to the bootstrap libDavid Faure2013-08-281-0/+2
| | | | | Change-Id: I861758746eca954cf074893b0241fd66c2ff39d2 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
* Enable DWM transparency for OpenGL windows under WindowsGiuseppe D'Angelo2013-08-285-0/+86
| | | | | | | | | | | | | | | | | | Starting with Windows Vista, we can control the compositing window manager using the DWM APIs. This allows us to make truly transparent OpenGL windows. We also have to detect and listen if compositing is enabled, otherwise enabling transparency will cause glitches all over the place. This (partially) fixes Task-number: QTBUG-28214 Change-Id: I0fe1ec7adec8181b788c32de03c59142731d9e7f Done-with: Friedemann Kleint <Friedemann.Kleint@digia.com> Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com> Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com> Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
* Don't compare const_iterator with iterator.Stephen Kelly2013-08-271-2/+2
| | | | | | | | | Commit 93ffb81df6e2cdc57ac8f70c6578f132024d7117 introduced this bug. As it is in the header, it affects downstreams. Change-Id: I02e86927e648153ca7c0b66ac945a7f99cc4cd89 Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Add stripped version of HarfBuzz-NG 0.9.19 sources to 3rdpartyKonstantin Ritt2013-08-2784-0/+33805
| | | | | Change-Id: I06fbf58131ebce51ce95921d8dfd65dd3d3e236f Reviewed-by: Lars Knoll <lars.knoll@digia.com>
* Make it possible to build HarfBuzz-NG in QtKonstantin Ritt2013-08-2715-0/+148
| | | | | Change-Id: Ib956adb0ab7bcfba3ce73acf7c19bda815d6eb73 Reviewed-by: Lars Knoll <lars.knoll@digia.com>
* Add operator[] to QVectorND classesSean Harmer2013-08-276-0/+102
| | | | | | Change-Id: Ia786d4fab64da974bb60f24c05325925d42a1e70 Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com> Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
* Add QJsonValue::toInt().Mitch Curtis2013-08-272-0/+15
| | | | | | | | | | | | | | | It's a nice feature to have. MSVC also complains about using doubles to create enum values, so the ugly workaround is: enumValue = MyEnum(qRound(json["myEnumValue"].toDouble())); [ChangeLog][QtCore][QJsonValue]Added QJsonValue::toInt(). Change-Id: I1a200b912abf66b2e96390b1980caff26cfa2685 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Lars Knoll <lars.knoll@digia.com>
* QMessageBox - move informative+details text to new layout functionThorbjørn Martsum2013-08-271-39/+47
| | | | | | | | Controlling the layout from different functions is not easy, so lets move it to the setupLayout function. Change-Id: I3120a2e98b2f8425befa135595d4ad7ce1b8ca56 Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
* Move the creation of QElapsedTimer out of the inner function in QMutexThiago Macieira2013-08-271-21/+5
| | | | | | | Makes it possible for QElapsedTimer to be non-POD. Change-Id: I5ffc59c7a93c187a4a814e6959f8383fa8d4cc44 Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
* Don't try to detect the CPUID instruction if we're compiling for PentiumThiago Macieira2013-08-271-1/+1
| | | | | | | | | | | | | | | | If we're compiling for Pentium or better CPUs, then we know that the CPUID instruction is present (I think it was introduced in late 486s, actually). So don't try to detect it. Simply assume it's there and then execute it. This means that if you compile Qt for Pentium (or higher) and run it on an i386 or i486, you'll get a SIGILL (or whatever your OS produces for an #UD processor exception). If the CPU detection code even got run -- SIGILL might happen for any other instructions found along the way. Change-Id: Iacd4a94a51363a609a61fc2bfd2e218fb290272d Reviewed-by: Olivier Goffart <ogoffart@woboq.com> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QAIV - Fix scollbars with ScrollPerPixel to scroll 1 pixel.Thorbjørn Lund Martsum2013-08-263-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The documentation says that we scroll one pixel Quote: "QAbstractItemView::ScrollPerPixel (value 1)" "The view will scroll the contents one pixel at a time." However until now Qt has tried to be smarter than the documentation, but is actually getting in the way of the user, where a manual set value to setSingleStep will continuingly be overwritten (on e.g resize). This patch ensures the behavior described in the documentation for the vertical headers - and leaves the control to the user. [ChangeLog][QtWidgets][QAbstractItemView] QTBUG-7232 - In ItemViews scrollbars will now by default only scroll 1 pixel when scrollMode is set to scrollPerPixel. That is it will (when scrollMode is scrollPerPixel) do what is stated in the documentation, and no longer automatically adjust the scrollbars singleStep. The user can now control that value. Task-number: QTBUG-7232 Change-Id: I8a61d3100be65d0c4ee32aad58caed019aa2669c Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
* qdoc: Fixed the relative link to installdir problemMartin Smith2013-08-261-1/+2
| | | | | | | | | | | Instead of using the fake "outputdir" to force qdoc to generate a relative path to the actual output dir, it now uses the value of HTML.outputsubdir, or just "html" if HTML.outputsubdir is not specified. Task-number: QTBUG-32580 Change-Id: I45c79a788e102213e6d343a7ed108a3d17d94759 Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
* Long live QCommandLineParser!David Faure2013-08-248-1/+1594
| | | | | | | | | | | | | | The QCommandLineParser class provides a means for handling the command line options. QCoreApplication provides the command-line arguments as a simple list of strings. QCommandLineParser provides the ability to define a set of options, parse the command-line arguments, and store which options have actually been used, as well as option values. Done-with: Laszlo Papp <lpapp@kde.org> Change-Id: Ic7bebc10b3f8d8dd06ad0f4bb897c51d566e3b7c Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Remove use of QFlag in the SQL driversThiago Macieira2013-08-242-23/+23
| | | | | | | It's not clear why they were added, but they aren't needed anymore. Change-Id: I1d919deefdbd6a71fa255eeac1a8543c33ba390d Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
* QLinkedList - fix insert with iterator when the list is shared.Thorbjørn Martsum2013-08-241-0/+3
| | | | | | | | Before a call to erase on a shared instance would imply that the item was inserted into the shared data (i.e all instances) Change-Id: I655ccf04b1ad9bf82e6bfade58929538fa7df000 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QList - fix insert with iterator on shared instanceThorbjørn Martsum2013-08-241-1/+5
| | | | | | | | This patch ensures correct detach when insert with an iterator is called on a shared instance (i.e same behavior as QVector) Change-Id: Id660eacd3cc7b633456dfa989997bbad747e1df2 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QLinkedList - fix erase with iterator when the list is shared.Thorbjørn Martsum2013-08-241-2/+32
| | | | | | | | | | | Before a call to erase on a shared instance would imply that the item was removed from the shared data (i.e all instances) This patch improves the behavior to detach and erase the item specified by the iterator (i.e same behavior as QVector) Change-Id: Ib3cfb5363c86b400886c80b75b0c20ca854ce801 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QList - fix QList::erase when the list is sharedThorbjørn Martsum2013-08-241-0/+15
| | | | | | | | | | | | Before calls to erase on a shared instance would in release mode imply that items were removed from the shared data (i.e all instances). In debug mode it would assert. This patch improves the behavior to detach and erase items specified by the iterator(s) (i.e same behavior as QVector) Change-Id: I89b69446cb1ffd43a98402b7ab1ec9a59bceb8e6 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QMap - fix erase with iterator when the map is sharedThorbjørn Martsum2013-08-241-0/+21
| | | | | | | | | | | Before a call to erase on a shared instance would imply that the item was removed from the shared data (i.e all instances) This patch improves the behavior to detach and erase the item specified by the iterator (i.e same behavior as QVector) Change-Id: Ia44db84fc1388d92308bf0d2b32539ac4d53850b Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QHash/QSet - fix QHash::erase when the hash is sharedThorbjørn Martsum2013-08-241-0/+16
| | | | | | | | | | | | | Before a call to erase on a shared instance would imply that the item was removed from the shared data (i.e all instances) This patch improves the behavior to detach and erase the item specified by the iterator (i.e same behavior as QVector) Since QSet uses QHash it improves QSet the same way. Change-Id: I850b1efcf7bdfc85ceddb23128b048af95f75063 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QThreadPool: fix counting of waiting threadsDavid Faure2013-08-241-2/+8
| | | | | | | | | | | | | | | | | | QTBUG-21051 has a testcase where activeThreadCount() could actually end up at -1 (converted to an autotest in this commit). The reason was: start() calls tryStart() which returns false due to too many active threads (reserveThread() causes this), so it calls enqueueTask() - which actually wakes up the waiting thread, but it didn't decrement the number of waiting threads. Note that tryStart() is "if I can grab a waiting thread, enqueue task and wake it" while start(), in case tryStart() fails, wants to "enqueue, and then if I can grab a waiting thread, wake it". This is why enqueue shouldn't wake; waking must happen only if we can grab a thread (d->waitingThreads > 0). Task-number: QTBUG-21051 Change-Id: I3d98337103031c9bdf0bf365295f245be0c66aa7 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Fix name of configure flag in QSettings documentation.Christian Kandeler2013-08-231-1/+1
| | | | | | | It's "-sysconfdir", with one hyphen. Change-Id: I62ddece98ee23989ae8d1881feb375e30d872190 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
* iOS: Make the event dispatcher properly emit aboutToBlock() and awake()Tor Arne Vestbø2013-08-232-0/+72
| | | | | | | | This approach follows the same one used by the Cocoa event dispatcher. Change-Id: I2813b09beae07d90477c9ca506924058ace13f34 Reviewed-by: Ian Dean <ian@mediator-software.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
* Share named time-interval constants in CoreFoundation event dispatcherTor Arne Vestbø2013-08-231-9/+12
| | | | | | Change-Id: Ie9ae40e3f7e2631c461ad01b6e5a4640c0b773c9 Reviewed-by: Ian Dean <ian@mediator-software.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
* iOS: Wrap CFRunLoopSource in C++ class for easier code legibilityTor Arne Vestbø2013-08-232-60/+77
| | | | | | Change-Id: If34953b171676f0246c2fb5e60c59f59350863ec Reviewed-by: Ian Dean <ian@mediator-software.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
* Rename QIOSEventDispatcher to QEventDispatcherCoreFoundationTor Arne Vestbø2013-08-234-43/+44
| | | | | | | | | | Now that it lives in QPlatformSupport, will be fleshed out more, and might be used on OSX at some point in time. Still iOS specific, as none of the iOS API usages have been ifdef'ed. Change-Id: Ib7fde6403ef2dfef175a6f306a85d58027569a30 Reviewed-by: Ian Dean <ian@mediator-software.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
* iOS: Determine render buffer resize based on CA layer, not Qt windowTor Arne Vestbø2013-08-231-5/+5
| | | | | | | | | | | | | | | We resize the render-buffer based on the CALayer of the UIView that's backing the QPlatformWindow, so the logic in defaultFramebufferObject() to determine if a resize is needed should be based on the relationship between the render buffer-and the CALayer, not the render-buffer and the QPlatformWindow. There is still an issue of the QPlatformWindow and its UIView/CALayer not being in sync, but that's a separate issue. Change-Id: I84f617d07ec64fea0d027473e9720523eeae0c7a Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
* Move SnapToDefaultButton from QPlatformDialogHelper to QPlatformThemeAndy Shaw2013-08-238-38/+13
| | | | | | | | | | | Since QPlatformTheme covers all dialogs whereas QPlatformDialogHelper is really only for the native dialogs then the SnapToDefaultButton hint is moved as it has relevance for all dialogs Task-number: QTBUG-32631 Change-Id: I1dce0bb4abcd4cfd39c4a199a33fc7078176ab4b Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
* Accessibility for AndroidFrederik Gladhorn2013-08-2220-6/+942
| | | | | | | | | | | | | | | | This enables both modes for TalkBack, explore-by-touch and the normal swiping mode. It is partially inspired by the BarGraphView example of the Google/Android Eyes-Free project. Note that for any accessibility to work you'll need a device with api level 16 at least. Using reflection we should be able to dynamically pick up the classes if we have the high enough api level. Change-Id: I11b93bead451483782a1711434d45c8f9a35996f Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
* Remove rowColumnExtents from QAccessibleTableCellInterfaceFrederik Gladhorn2013-08-225-20/+11
| | | | | | | | | The API is broken and available in individual functions. Don't make it more complicated than necessary to implement the interfaces for new widgets. Change-Id: Ie408c369ef05b2b8e7ac666b25153d090fcf3aae Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
* iOS: Activate window on touchesEnded instead of touchesBeganRichard Moe Gustavsen2013-08-221-6/+8
| | | | | | | | | | | | | Since we await giving focus to a focus object until a press release, it also makes sense to await activating a window until a press release, since they both have to do with focus. By doing so, the input panel now stays open if the user selects a line edit in one window when a line edit in another window still has focus. We also avoid activating a window in case of a touch cancel (e.g as a result of the user flicking or triggering a gesture). Change-Id: Ic00c4be69c257fceb10ce2d5a81cb490ea93710f Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
* qdoc: Fix the qdoc \include commandMartin Smith2013-08-224-4/+44
| | | | | | | | | | | | | | | | qdoc's \include command now works as expected. This command is only for including a file that contains qdoc comments that contain qdoc commands to be processed by qdoc. The file to be included should have the .qdocinc suffix, although qdoc will accept any suffix now. The file must be in one of the directories specified by the sourcedirs variable in the qdocconf file. Task-number: QTBUG-33046 Change-Id: I45ea08932b4218aae369469968117fb5132f764b Reviewed-by: Alex Blasche <alexander.blasche@digia.com> Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
* qdoc: Make example file names uniqueMartin Smith2013-08-223-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | To avoid duplicate files for examples, the files are named this way. Suppose you have an example called mandelbrot. The example is in a subdirectory named mandelbrot, and there is a \example command somewhere like this: \example mandelbrot In this case, the mandelbrot example is in the QtCore module. Then the name of the example page will be: "qtcore-mandelbrot-example" ...and the names of the example files will be: "qtcore-mandelbrot-main-cpp.html" "qtcore-mandelbrot-mandelbrot-pro.html" "qtcore-mandelbrot-mandelbrotwidget-cpp.html" "qtcore-mandelbrot-mandelbrotwidget-h.html" "qtcore-mandelbrot-renderthread-cpp.html" "qtcore-mandelbrot-renderthread-h.html" Task-number: QTBUG-32580 Change-Id: Ic4445fd65b679523d6d94a8b0c19289d049ef0b0 Reviewed-by: Martin Smith <martin.smith@digia.com> Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
* Fix typo in qkeysequence.cpp code comment.Mitch Curtis2013-08-221-1/+1
| | | | | Change-Id: I833c4da7363d7ae5dcfa5a901dadc0e327080e40 Reviewed-by: David Faure (KDE) <faure@kde.org>
* HTTP socket engine: support newer HTTP proxiesPeter Hartmann2013-08-222-37/+60
| | | | | | | | | | After sending authentication, we need to revert all states to be able to read the HTTP header again. Before, we would not try to read an HTTP header after sending authentication. Change-Id: Id4b95eda9881a37bcfbae0570756bb3e4918a568 Reviewed-by: Richard J. Moore <rich@kde.org> Reviewed-by: Shane Kearns <shane.kearns.qt@gmail.com>
* QMessageBox - merge some mac and non-mac codeThorbjørn Martsum2013-08-221-6/+2
| | | | | | | | | | | | I have not located any significant behavior changes in this, and it is annoying having too much similar code in different branches. The main change is a removal of Qt::AlignLeft, but the icon Label should be in its own column. Change-Id: Iaf07fc503075e61e2af1a93d5fc9e6e34a24451d Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
* QMessageBox - move layout handlingThorbjørn Martsum2013-08-221-12/+18
| | | | | | | | This patch moves some layout handling to a new function. That will be helpful later since we can re-use the new function. Change-Id: I4cc846f9958d9530ec2b07292093b94bd27ee055 Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
* Define Q_PROCESSOR_X86 to the x86 familyThiago Macieira2013-08-221-2/+24
| | | | | | | | | | | | | | | They are: 3 Intel 80386 or equivalent 4 Intel 80486 or equivalent 5 Intel Pentium, Pentium MMX, AMD K6 and a few others 6 everything since the Intel Pentium Pro and AMD Athlon By necessity, this means all 64-bit builds have a family of 6. That matches the family number that the CPUID instruction produces. Change-Id: I5dc7344976f8da65938f44310b89ade4fe3f1a28 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Merge "Merge remote-tracking branch 'origin/stable' into dev" into ↵Thiago Macieira2013-08-2231-191/+608
|\ | | | | | | refs/staging/dev
| * Merge remote-tracking branch 'origin/stable' into devFrederik Gladhorn2013-08-2131-191/+608
| |\ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: qmake/doc/src/qmake-manual.qdoc src/plugins/platforms/xcb/qxcbconnection_xi2.cpp src/src.pro Change-Id: I0a560826c420e46988da3776bd8f9160c365459a
| | * Tidy up QJsonObject documentation.Mitch Curtis2013-08-201-19/+19
| | | | | | | | | | | | | | | | | | Change-Id: I445e0573c3c4fdb86ef535299a4eb299e225c15d Reviewed-by: Jerome Pasion <jerome.pasion@digia.com> Reviewed-by: Lars Knoll <lars.knoll@digia.com>
| | * Doc: qtgui configuration file with commentsNico Vertriest2013-08-201-0/+292
| | | | | | | | | | | | | | | | | | | | | | | | Task-number: QTBUG-31801 Change-Id: I225edf67f586cc5822269c643020d5666465712d Reviewed-by: Martin Smith <martin.smith@digia.com> Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
| | * Use correct mask constant in the Windows event dispatcher.Friedemann Kleint2013-08-201-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mask out QS_TOUCH, QS_POINTER when running a VS2012-compiled binary on pre-Windows 8 systems. Task-number: QTBUG-32257 Task-number: QTBUG-28513 Task-number: QTBUG-29097 Task-number: QTBUG-29435 Change-Id: I33ce3a659a234cb04d3b5ae9d668d193d681be7f Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
| | * Revert "Disable precision timers when running MSVC2012 code on pre-Windows 8."Friedemann Kleint2013-08-201-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit aa1b4c0943187d82e0c313b93559e99226a9c75a. It turns out that the bug is caused by a different mask constant in Windows 8 which should not take effect in pre-Windows 8. Change-Id: I1ad502262dae42856c07d48ee3bc9dc032ab379b Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
| | * Windows: Add hit test handling for non-client areas.Friedemann Kleint2013-08-194-2/+51
| | | | | | | | | | | | | | | | | | | | | | | | Suppress resize cursor for fixed size windows. Task-number: QTBUG-32663 Change-Id: I9579bb13d494fe21e5db7b75d01a3cf1b693c7f6 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
| | * Fix potential division by zeroFrederik Gladhorn2013-08-191-8/+13
| | | | | | | | | | | | | | | | | | | | | | | | Since it's possible to call the function on an empty model, return failure in that case. Change-Id: I0a0eabe917da3e6294bdd616a85579f6dc894ec8 Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-25 17:22:37 +0000