summaryrefslogtreecommitdiffstats
path: root/tests/auto/corelib/kernel/qsocketnotifier
Commit message (Collapse)AuthorAgeFilesLines
* Change license for tests filesLucie Gérard2024-02-041-1/+1
| | | | | | | | | | | | According to QUIP-18 [1], all tests file should be LicenseRef-Qt-Commercial OR GPL-3.0-only [1]: https://contribute.qt-project.org/quips/18 Pick-to: 6.7 Task-number: QTBUG-121787 Change-Id: I9657df5d660820e56c96d511ea49d321c54682e8 Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
* QAbstractSocketEngine: port to QDeadlineTimerAhmad Samir2023-10-071-2/+2
| | | | | | | | | | | | | | | | qnativesocketengine_win.cpp: don't check if timeout is < 0, because remainingTimeAsDuration() doesn't return negative values. All the changes done in one go, not function by function, as that causes the least churn. You can think of them as a couple of very similar changes repeated various times. Drive-by change: replace `forever {` with `for (;;)` Task-number: QTBUG-113518 Change-Id: Ie9f20031bf0d4ff19e5b2da5034822ba61f9cbc3 Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
* QSocketNotifier: firm up the ordering in unexpectedDisconnection()Thiago Macieira2023-07-112-8/+7
| | | | | | | | | | | | | | | | | | | | | | | | The test was relying on the fact that, having written 1 byte to both writeEnd1 and writeEnd2 (and ensured those bytes were written with waitForBytesWritten()), both read ends would be activated by the next event loop. It turns out that this was an unreliable assumption, because the processing of that 1 byte on the second socket may not have happened yet. So firm up by waiting that both read ends are readable before even creating the QSocketNotifiers we will read on. I'm not entirely sure what this test is attempting to test. Its documentation says it's testing a QAbstractSocket condition, but the read ends aren't QAbstractSocket (this test should have been in tst_QAbstractSocket if so). It may be testing the condition that caused that QAbstractSocket behavior, but that wouldn't be a good test. Drive-by remove redundant flush()-after-waitForBytesWritten() calls. Fixes: QTBUG-115154 Pick-to: 6.5 6.6 Change-Id: I61b74deaf2514644a24efffd17708f8071f707ed Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io> Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
* Update blacklisting of tst_QSocketNotifier::unexpectedDisconnectionVolker Hilsheimer2023-07-101-2/+1
| | | | | | | | | | The test hasn't failed on Windows for a long time, but regularly fails on macOS in CI, so replace the entry accordingly. Task-number: QTBUG-115154 Pick-to: 6.6 Change-Id: Ib89d15cb9edafad5dd71f6e3f830d03aaeb16331 Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
* CMake: Make corelib tests standalone projectsAlexandru Croitor2023-07-051-0/+6
| | | | | | | | | | | | | | | | | | Add the boilerplate standalone test prelude to each test, so that they can be opened with an IDE without the qt-cmake-standalone-test script, but directly with qt-cmake or cmake. Boilerplate was added using the following scripts: https://git.qt.io/alcroito/cmake_refactor Manual adjustments were made where the code was inserted in the wrong location. Task-number: QTBUG-93020 Change-Id: I28b6d3815c5f43d2c33ea65764f6f3f8f129eaf3 Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io> Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QTestEventLoop: add enterLoop(std::chrono::milliseconds) overloadAhmad Samir2023-03-031-1/+2
| | | | | | | Task-number: QTBUG-110059 Change-Id: Ibf1d76afd313e390103be4a22e44af7fb41ace1b Reviewed-by: Edward Welbourne <edward.welbourne@qt.io> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* tests: Remove remains of qmake conversion from CMakeLists.txt filesFriedemann Kleint2023-02-171-5/+0
| | | | | | | Pick-to: 6.5 Change-Id: I8d106554bb86ac1ec9bb7a4083de4c376bcbab1d Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
* Port from container::count() and length() to size() - V5Marc Mutz2022-11-031-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a semantic patch using ClangTidyTransformator as in qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to handle typedefs and accesses through pointers, too: const std::string o = "object"; auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); }; auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) { auto exprOfDeclaredType = [&](auto decl) { return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o); }; return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes)))); }; auto renameMethod = [&] (ArrayRef<StringRef> classes, StringRef from, StringRef to) { return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)), callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))), changeTo(cat(access(o, cat(to)), "()")), cat("use '", to, "' instead of '", from, "'")); }; renameMethod(<classes>, "count", "size"); renameMethod(<classes>, "length", "size"); except that the on() matcher has been replaced by one that doesn't ignoreParens(). a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'. Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache, to avoid porting calls that explicitly test count(). Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22 Reviewed-by: Ivan Solovev <ivan.solovev@qt.io> Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
* Change the license of all CMakeLists.txt and *.cmake files to BSDLucie Gérard2022-08-231-1/+1
| | | | | | | Task-number: QTBUG-105718 Change-Id: I5d3ef70a31235868b9be6cb479b7621bf2a8ba39 Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
* Add license headers to cmake filesLucie Gérard2022-08-031-0/+3
| | | | | | | | | | | | CMakeLists.txt and .cmake files of significant size (more than 2 lines according to our check in tst_license.pl) now have the copyright and license header. Existing copyright statements remain intact Task-number: QTBUG-88621 Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
* CMake: Don't use PUBLIC_LIBRARIES for tests and test helpersAlexandru Croitor2022-07-281-2/+2
| | | | | Change-Id: I9b7404e1d3a78fe0726ec0f5ce1461f6c209e90d Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
* Use SPDX license identifiersLucie Gérard2022-05-161-27/+2
| | | | | | | | | | | | | Replace the current license disclaimer in files by a SPDX-License-Identifier. Files that have to be modified by hand are modified. License files are organized under LICENSES directory. Task-number: QTBUG-67283 Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1 Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Lars Knoll <lars.knoll@qt.io> Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
* CMake: Remove the usage of QT_SOURCE_TREE from testsJoerg Bornemann2021-07-121-2/+0
| | | | | | | | | | | | | | The ${QT_SOURCE_TREE}/src/network include paths of several tests are apparently not needed anymore. Remove those. tst_qfilesystementry and tst_qfreelist are the only tests that actually need to reference files in qtbase's source tree. Simply use the paths relative to the project file. Task-number: QTBUG-88090 Change-Id: Ic6f341e001338c1b07dce6e58316245bc9560c5e Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io> Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
* tst_socketnotifier: Fix timeout of QTcpServer::waitForNewConnection()Friedemann Kleint2021-01-211-2/+2
| | | | | | | | The timeout defaults to 0, give it 5s. Pick-to: 6.0 Change-Id: I975810a1ecee8bb8b3a3f143f1379a9a09589a40 Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
* tst_socketnotifier/unexpectedDisconnection: Extend blacklisting to all ↵Friedemann Kleint2021-01-191-2/+2
| | | | | | | | | | windows versions The test has been failing frequently, recently. Pick-to: 6.0 Change-Id: I3ae00a64f67e4b6a0b5ade0c660805f4d12f8317 Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
* Remove the qmake project filesJoerg Bornemann2021-01-071-8/+0
| | | | | | | | | | | | | | | | Remove the qmake project files for most of Qt. Leave the qmake project files for examples, because we still test those in the CI to ensure qmake does not regress. Also leave the qmake project files for utils and other minor parts that lack CMake project files. Task-number: QTBUG-88742 Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc Reviewed-by: Edward Welbourne <edward.welbourne@qt.io> Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Kai Koehne <kai.koehne@qt.io>
* QSocketNotifier: hone setSocket() APIAlex Trotsenko2020-12-171-5/+5
| | | | | | | | Remove a second argument to the setSocket(qintptr, bool) function as it makes the API harder to understand. Change-Id: Ib1852a4e9d96adde35bfbf0fe03b386d9ded395a Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
* QSocketNotifier: extend API to provide more flexible startupAlex Trotsenko2020-12-111-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | Technically, having a single constructor limits the use-cases for this class. We should take into account that: - an opened socket descriptor must be available at the moment of construction; - the constructor unconditionally enables the notifier (the possible solution notifier = new QSocketNotifier(...); notifier->setEnabled(false); is suboptimal due to heavy operations inside the event dispatcher); - for these reasons, QSocketNotifier most often cannot be a member of another class (we have an extra allocation and indirect access). This patch addresses this shortcoming by making it possible to set the socket descriptor at a later point: [ChangeLog][QtCore][QSocketNotifier] Added setSocket() and an additional constructor which requires no socket. Change-Id: I2eb2edf33ddafe99e528aac7d3774ade40795e7a Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
* CMake: Regenerate projects to use new qt_internal_ APIAlexandru Croitor2020-09-231-2/+2
| | | | | | | | | | | Modify special case locations to use the new API as well. Clean up some stale .prev files that are not needed anymore. Clean up some project files that are not used anymore. Task-number: QTBUG-86815 Change-Id: I9947da921f98686023c6bb053dfcc101851276b5 Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io> Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
* CMake: Regenerate tests with new qt_ prefixed APIsAlexandru Croitor2020-07-091-2/+2
| | | | | | | | Use pro2cmake with '--api-version 2' to force regenerate projects to use the new prefixed qt_foo APIs. Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069 Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
* CMake: Regenerate testsAlexandru Croitor2020-07-091-7/+0
| | | | | | | | This is in preparation for regenerating them with the new qt_foo prefixed APIs. Change-Id: Iff34932d642b1c0186ee39f952adf3ad367fd602 Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
* Remove winrtOliver Wolff2020-06-061-17/+0
| | | | | | | | | Macros and the await helper function from qfunctions_winrt(_p).h are needed in other Qt modules which use UWP APIs on desktop windows. Task-number: QTBUG-84434 Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925 Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* Merge remote-tracking branch 'origin/5.15' into devQt Forward Merge Bot2020-04-221-5/+65
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: src/widgets/widgets/qabstractbutton.cpp src/widgets/widgets/qbuttongroup.cpp src/widgets/widgets/qbuttongroup.h src/widgets/widgets/qsplashscreen.cpp tests/auto/widgets/widgets/qbuttongroup/tst_qbuttongroup.cpp tests/benchmarks/opengl/main.cpp Needed update: src/plugins/platforms/cocoa/CMakeLists.txt Change-Id: I7be4baebb63844ec2b3e0de859ca9de1bc730bb5
| * Introduce QSocketNotifier::activate(QSocketDescriptor, QSN::Type)Mårten Nordheim2020-04-161-5/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pre-existing overload passes an int, but this can mean the descriptor gets truncated in compilations where the descriptor is 64-bit. The old overload with int is visible when querying the metaobject system so string-based connects still work as before, and connecting to it will produce a deprecation warning in the output. At the same time the PMF-based connect will, on recompile, pick the QSocketDescriptor overload. As an added improvement it also comes with the notification type, removing the need for separate slots where the code would be mostly shared anyway. The QSocketDescriptor type can be implicitly converted to and from qintptr to ensure existing code still compiles. It can also be constructed from Qt::HANDLE on Windows. In this same patch I also update the existing string-based connects in this module, which then includes updating the parameters for some slots as well. [ChangeLog][QtCore][QSocketNotifier] Added QSocketNotifier::activated(QSocketDescriptor, QSocketNotifier::Type). This replaces the activated(int) signal which in 64-bit environments could truncate the socket descriptor. If you use "activated" with the string-based connect() then you need to update the parameter type of the signal and slot if it had one. If you use it with the pointer to member function based connect() then all you need to do is update your slot's parameter type if it has one. If you need to compile your source code with multiple versions of Qt then connect() to this function using pointer to member function and update the slot's parameter type if needed. Task-number: QTBUG-70441 Change-Id: Ic43d6bc4c5bcb4040867b2ffad8d36fb01eed8af Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
* | Regenerate projects one last time before mergewip/cmakeAlexandru Croitor2020-02-121-3/+2
| | | | | | | | | | | | Change-Id: Ia24cf56b79ca6dacd370a7e397024e9b663e0167 Reviewed-by: Liang Qi <liang.qi@qt.io> Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* | Regenerate TestsLeander Beernaert2020-01-161-1/+1
| | | | | | | | | | | | Change-Id: I78f1efbec809610bcf6a8224392fa0dc8dbf3b3b Reviewed-by: Qt CMake Build Bot Reviewed-by: Cristian Adam <cristian.adam@qt.io>
* | Regenerate tests/auto/corelib/kernelAlexandru Croitor2019-11-121-3/+6
| | | | | | | | | | | | | | Change-Id: I466387408d26854e11fde0a1fbef74c2fad764c7 Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Simon Hausmann <simon.hausmann@qt.io> Reviewed-by: Qt CMake Build Bot
* | Merge remote-tracking branch 'origin/wip/qt6' into wip/cmakeAlexandru Croitor2019-10-111-2/+1
|\| | | | | | | Change-Id: I3a1d7673c3c20019ab12a2ea0a60f1619920a34c
| * Update for failures only on dev branch. Use general platform namesDaniel Smith2019-08-191-2/+1
| | | | | | | | | | | | | | | | | | | | This patch was generated with tooling from patchset 31 of https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive mode. General platform names were chosen if greater than 60% of the currently active platforms of a given type in COIN recently failed. Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146 Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
* | Merge branch 'wip/qt6' into wip/cmakeAlexandru Croitor2019-08-151-2/+3
|\| | | | | | | Change-Id: I50ac36b8803c296998149e98cc61e38687cdd14b
| * unblacklist passing testsDaniel Smith2019-07-081-2/+3
| | | | | | | | | | | | | | | | These tests have not failed on the removed platforms for at least 60 days Task-number: QTBUG-76608 Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* | Regenerate qsocketnotifier testAlexandru Croitor2019-08-012-9/+36
| | | | | | | | | | | | | | Remove the previously wrongly committed CMakeLists.gen.txt file. Change-Id: I75e87865a9f2b237d321d29f92e25aee5f7febb9 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* | Implement SUBDIR-= conversion in pro2cmake toolJędrzej Nowacki2019-08-011-0/+9
|/ | | | | | | | | | | | | | | | | | CMake doesn't support removing subdirectories therefore one need to convert all removal to conditional adds. The resulting code doesn't win a beauty contest. That is because handle_subdir works on already processed strings which means it doesn't have access to the boolean operations. As such it can not minimize the expressions, but it works and in the most simple cases it is pretty good. The patch re-generates CMakeLists.txt under tests/auto/corelib/kernel excluding qcoreapplication, qmetatype, qmimedata, qobject, qtimer, which are suffering from unrelated problems, like for example Gui, pthread linkage issues. Change-Id: I18a02f6eda7a3b41b1313211c8bc9ce277bb67be Reviewed-by: Qt CMake Build Bot Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* winrt: Fix tst_QSocketNotifier::asyncMultipleDatagramOliver Wolff2017-05-111-0/+4
| | | | | Change-Id: I90de7487b0ddcd5655434e99a05eef7f29def59b Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
* Improve suppression of spurious socket notifications under WindowsAlex Trotsenko2017-05-031-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | There were still two cases where spurious notifications would be possible: - user calls hasPendingDatagrams()/pendingDatagramSize() on UDP socket somewhere outside the slot connected to readyRead() signal (::WSARecvFrom posts FD_READ notification, even if a notification for incoming datagram already exists in the message queue); - a socket was registered to receive several types of event and WM_QT_ACTIVATENOTIFIERS message is located between the different events for this socket in the queue. Provided patch ensures that the message queue is synchronized with the Qt event processing mechanism and adds a way to detect spurious notifications inside the window procedure. Task-number: QTBUG-58214 Change-Id: I49609dace601f300de09875ff1653617efabd72f Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io> Reviewed-by: Lars Knoll <lars.knoll@qt.io> Reviewed-by: Oliver Wolff <oliver.wolff@qt.io> Reviewed-by: Edward Welbourne <edward.welbourne@qt.io> Reviewed-by: Peter Seiderer <ps.report@gmx.net>
* Use qtConfig throughout in qtbaseLars Knoll2016-08-191-1/+1
| | | | | | | | | | | Use the new qtConfig macro in all pro/pri files. This required adding some feature entries, and adding {private,public}Feature to every referenced already existing entry. Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4 Reviewed-by: Lars Knoll <lars.knoll@qt.io> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
* Merge remote-tracking branch 'origin/5.6' into 5.7Liang Qi2016-02-181-0/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | This also reverts commit 018e670a26ff5a61b949100ae080f5e654e7bee8. The change was introduced in 5.6. After the refactoring, 14960f52, in 5.7 branch and a merge, it is not needed any more. Conflicts: .qmake.conf src/corelib/io/qstandardpaths_mac.mm src/corelib/tools/qsharedpointer_impl.h tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
| * winrt: Disable tests which connect to localhostMaurice Kalinowski2016-02-161-0/+9
| | | | | | | | | | | | | | | | | | WinRT does not allow do connect to the localhost due to security constraints and sandboxing. Hence we need to disable those currently. Change-Id: Idb8c71397a41e5fa5bad9d618dba1bb389e71b9c Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
* | Updated license headersJani Heikkinen2016-01-211-17/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some exceptions, see http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/ Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one (in those files which will be under GPL 3 with exceptions) Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
* | Merge remote-tracking branch 'origin/5.6' into devLiang Qi2015-10-141-0/+73
|\| | | | | | | | | | | | | | | | | Conflicts: tests/auto/corelib/io/qfile/tst_qfile.cpp tests/auto/corelib/io/qprocess/tst_qprocess.cpp tests/auto/corelib/tools/qversionnumber/qversionnumber.pro Change-Id: Ia93ce500349d96a2fbf0b4a37b73f088cc505c6e
| * Merge remote-tracking branch 'origin/5.5' into 5.6Liang Qi2015-10-021-0/+73
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: qmake/doc/src/qmake-manual.qdoc src/corelib/tools/qstring.h src/gui/image/qimagereader.cpp src/network/access/qnetworkaccessmanager.cpp src/tools/qdoc/doc/examples/examples.qdoc src/widgets/accessible/qaccessiblewidgetfactory_p.h src/widgets/doc/qtwidgets.qdocconf Change-Id: I8fae62283aebefe24e5ca4b4abd97386560c0fcb
| | * Fix the spurious socket notifications under WindowsAlex Trotsenko2015-09-101-0/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To handle network events, QEventDispatcherWin32 uses I/O model based on notifications through the window message queue. Having successfully posted notification of a particular event to an application window, no further messages for that network event will be posted to the application window until the application makes the function call that implicitly re-enables notification of that network event. With these semantics, an application need not read all available data in response to an FD_READ message: a single recv in response to each FD_READ message is appropriate. If an application issues multiple recv calls in response to a single FD_READ, it can receive multiple FD_READ messages (including spurious). To solve this issue, this patch always disables the notifier after getting a notification, and re-enables it only when the message queue is empty. Task-number: QTBUG-46552 Change-Id: I05df67032911cd1f5927fa7912f7864bfbf8711e Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
* | | Tests: Remove CONFIG += parallel_test.Friedemann Kleint2015-09-051-1/+0
| | | | | | | | | | | | | | | | | | | | | The keyword no longer has a meaning for the new CI. Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1 Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
* | | Remove QT_DISABLE_DEPRECATED_BEFORE=0 from tests not using deprecated API.Friedemann Kleint2015-09-011-1/+0
| | | | | | | | | | | | | | | Change-Id: I1955320e7639760b4383a53f37a506c8055933ef Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
* | | tests/corelib: Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b).Friedemann Kleint2015-08-191-4/+4
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | - Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer). - Replace Q[TRY]_VERIFY(smartPointer == 0) by Q[TRY]_VERIFY(smartPointer.isNull()). - Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and add casts where necessary. The values will then be logged should a test fail. Tests from corelib/tools were omitted in this change. Change-Id: I4c8786d33fcf429d11b2b624c7cd89c28cadb518 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* / Blacklist and skip various tests that are flakeySimon Hausmann2015-06-141-0/+3
|/ | | | | | | | | | They didn't show up in the "old" CI runs because they usually pass the second time they are executed - which the testrunner does. The new CI doesn't do that anymore, instead we now mark those tests explicitly and will track their record of passing and failing in the new metrics database. Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b Reviewed-by: Lars Knoll <lars.knoll@digia.com>
* Update copyright headersJani Heikkinen2015-02-111-7/+7
| | | | | | | | | | | | | | | | | | Qt copyrights are now in The Qt Company, so we could update the source code headers accordingly. In the same go we should also fix the links to point to qt.io. Outdated header.LGPL removed (use header.LGPL21 instead) Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing combination. New header.LGPL-COMM taken in the use file which were using old header.LGPL3 (src/plugins/platforms/android/extract.cpp) Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license combination Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
* Update license headers and add new license filesMatti Paaso2014-09-241-19/+11
| | | | | | | | | - Renamed LICENSE.LGPL to LICENSE.LGPLv21 - Added LICENSE.LGPLv3 - Removed LICENSE.GPL Change-Id: Iec3406e3eb3f133be549092015cefe33d259a3f2 Reviewed-by: Iikka Eklund <iikka.eklund@digia.com>
* Updated corelib's unit tests to use QSignalSpy's functor constructorKeith Gardner2014-05-081-3/+3
| | | | | | | | | The intent is to provide compile time validation of signals and to help detect signal overloading in the future. Change-Id: I9d5d46ed4b70c5d0cd407deb5928b1e76d37e007 Reviewed-by: Olivier Goffart <ogoffart@woboq.com> Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
* WinRT: Added socket engine implementationOliver Wolff2014-02-151-0/+4
| | | | | | | | | | Added basic functionality to socket for WinRT. Even though not all auto tests pass yet, this patch can be seen as a foundation for upcoming work in this area. Reading from and writing to TCP socket works and one can listen for tcp connections. Change-Id: Id4c25ba1c7187ed92b6368c785c4f62837faded7 Reviewed-by: Andrew Knight <andrew.knight@digia.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-07 05:07:27 +0000