| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We need it to run after all the thread-local destructors have run, to
ensure that some user code hasn't run after QThreadPrivate::finish() has
finished. We achieve that by making it get called from a thread-local
destructor itself, in the form of a qScopeGuard.
This ought to have been done since C++11 thread_local with non-trivial
destructors became available. However, it only started showing up after
commit 4a93285b166ceceaea2e10c8fc6a254d2f7093b9 began using thread_local
inside Qt itself. The visible symptom was that QThreadPrivate::finish()
had already destroyed the thread's event dispatcher, but some user code
ran later and expected it to still exist (or, worse, recreated it, via
QEventLoop → QThreadData::ensureEventDispatcher).
Fixes: QTBUG-117996
Pick-to: 6.7
Change-Id: I8f3ce163ccc5408cac39fffd178d682e5bfa6955
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
|
| |
This allows a more efficient way of checking whether a thread is the
currently executing one (without using private API).
Change-Id: I007edae6b258d7e42e901fa720d4f3cf9fe25a49
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
|
|
|
|
|
|
|
|
|
|
| |
Some of these would break if we changed the start(Priority) to say
start(QThread::Priority) instead.
Pick-to: 6.7 6.5 6.2
Task-number: QTBUG-124723
Change-Id: Id3ebe73718c8acbc54a2c88158f4062fd0dd5be1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
| |
Change-Id: I83dda2d36c904517b3c0fffd17b52c421bf08d5b
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
According to QUIP-18 [1], all tests file should be
LicenseRef-Qt-Commercial OR GPL-3.0-only
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: I9657df5d660820e56c96d511ea49d321c54682e8
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove the following CIs from BLACKLIST files as they are no longer
used:
- msvc-2015
- msvc-2017
- windows-7sp1
- opensuse-42.3
- ubuntu 16.04/18.04/20.04
- rhel 6.6/7.4/7.6
- redhatenterpriselinuxworkstation-6.6
Change-Id: Ief9550e3455a1ed211d978933262c8d5557b0fec
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
|
|
|
|
|
|
|
|
|
|
|
| |
Everyone must have this by now. This test was 1193 ms of CMake time.
Since this was a PUBLIC feature, I've left it around with a constant
condition.
Change-Id: Ifbf974a4d10745b099b1fffd177754538bbff245
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add the boilerplate standalone test prelude to each test, so that they
can be opened with an IDE without the qt-cmake-standalone-test script,
but directly with qt-cmake or cmake.
Boilerplate was added using the following scripts:
https://git.qt.io/alcroito/cmake_refactor
Manual adjustments were made where the code was inserted in the wrong
location.
Task-number: QTBUG-93020
Change-Id: I28b6d3815c5f43d2c33ea65764f6f3f8f129eaf3
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All the other overloads are implemented using the new one.
Windows change relies on the pre-check in the code review making sure it
compiles.
[ChangeLog][QtCore][QThread] Added sleep(std::chrono::nanoseconds)
overload.
Task-number: QTBUG-110059
Change-Id: I9a4f4bf09041788ec9275093b6b8d0386521e286
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
|
|
| |
Pick-to: 6.5
Change-Id: I8d106554bb86ac1ec9bb7a4083de4c376bcbab1d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
|
|
|
|
|
|
|
| |
Task-number: QTBUG-105718
Change-Id: I5d3ef70a31235868b9be6cb479b7621bf2a8ba39
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
| |
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
|
|
|
|
|
| |
Change-Id: I9b7404e1d3a78fe0726ec0f5ce1461f6c209e90d
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Deal with the case that the object gets deleted between a call to
moveToThread and the start of the thread by removing the object from the
list in that case.
Fixes: QTBUG-104014
Pick-to: 6.4
Change-Id: Ib249b6e8e8dfbc4d1332bb99a57fa9d3cff16465
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If we create a QThread from QThread::current(), we want it to have a
correct value for its bindingStatus. Thus, initialize bindingStatus in
the ctor of QAdoptedThread.
Task-number: QTBUG-101177
Task-number: QTBUG-102403
Pick-to: 6.4 6.3
Change-Id: I3ef27ed62c5dc25eed05d551c72743a1b8528318
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
| |
We missed the terminating ";" in the QSKIP lines.
Amends ea4d6b987ae10f1bb910081b523c3b22b11f7b64
Pick-to: 6.3 6.4
Change-Id: Ibda43b8a84230c243dbcc74e157f4c3f8ef3891d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Thread termination might prevent stack unwinding, which then
generates ASAN errors such as
ERROR: AddressSanitizer: stack-buffer-underflow on address
0x7f3c1d7858b0 at pc 0x7f3c243d8918 bp 0x7f3c1d7857f0 sp 0x7f3c1d7857e8
Skip such tests so that we can enable blocking CI runs under ASAN.
Fixes: QTBUG-104421
Pick-to: 6.4 6.3
Change-Id: I169235a12190e3f72525cddfe1a44a4bee19eca1
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
On finishing/terminating a thread, when processing posted events,
we need to consider QThread's own data instead of caller thread's data.
Otherwise we can get into unexpected situations such as double
destruction of an object, premature destruction, etc.
Fixes: QTBUG-103922
Pick-to: 6.4 6.3 6.3.1 6.2 5.15
Change-Id: Idf77221ebbaa0b150ee2d0c296b51829ae8dc30e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
|
|
|
|
| |
... in favor of including qabstracteventdispatcher_p.h, where needed.
Keeps the code DRY.
Change-Id: I5bee2e653cb29ffac2601ff03c952a4b3adbdb9c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
|
|
|
|
| |
Add the Q_OS_WIN32 guard for the include of QWinEventNotifier.
Change-Id: I7824b2ee236a370c83fd85a2f594a39cf36b36e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If one destroys a running QThread, so far the behavior has been to crash
(à la std::thread) -- assuming the thread hasn't already signalled that
it has finished. This behavior is hostile to solutions such as using
QThread::create(), which always require a wait() before destroying the
thread object.
We can use the opportunity to change the behavior without breaking any
valid code. Instead of crashing, inside QThread's destructor we can ask
the new thread to quit, and then join it (à la std::jthread). This
simplifies the implementation of long-living runnables and the code that
manages them.
Deploying this solution for the whole QThread class may not be entirely
painless. While no correct code would work differently with the proposed
changes, incorrect code that deletes a running thread would no longer
crash "loudly" -- instead, it might deadlock "quietly", have memory
corruptions, etc.
Hence I'm limiting this approach to only the threads created by
QThread::create(), at least for the time being. This also side-steps
perhaps the biggest problem of generalizing the approach, which is that
placing such interrupt+join logic into~QThread's destructor would cause
it to be run _after_ a QThread subclass' own destructor has run,
destroying the subclass' data members too early. This might create
an antipattern if one chooses to subclass QThread. With create(), a
subclass in question exists, and it indeed has NSDMs, but it's entirely
under our control (in fact, I'm placing the logic just in its dtor).
[ChangeLog][QtCore][QThread] Destroying a QThread object created by
QThread::create() while the thread that it manages is still running will
now automatically ask that thread to quit, and will wait until the
thread has finished. Before, this resulted in a program crash. See the
documentation of QThread::~QThread() for more details.
Change-Id: Ib268b13da422e277ee3ed6f6c7b2ecc8cea5750c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use variable args macros to swallow any extra commas in the
expression. To use this, the type of the exception has to be first.
Use Eddy's suggestion for a new name to avoid breaking the old macro.
[ChangeLog][QtTest] Added QVERIFY_THROWS_EXCEPTION, replacing
QVERIFY_EXCEPTION_THROWN, which has therefore been deprecated.
Change-Id: I16825c35bae0631c5fad5a9a3ace4d6edc067f83
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
|
|
|
|
|
|
|
|
|
| |
We have some special handling in qt_windows.h,
use it instead of the original windows.h
Change-Id: I12fa45b09d3f2aad355573dce45861d7d28e1d77
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
|
|
|
|
|
|
|
|
|
| |
Testlib is not thread safe. Store the status into variable and check
it in the main thread instead.
Pick-to: 6.2
Change-Id: I840c8a3dceb1115a1b81ffeaa0fab96f9d2f1ff0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Unix QThread implementation stores pthread_t as a system thread ID
when the thread is created, but never resets the system ID when
those threads are destroyed. Some implementations may reuse the
same thread IDs for new threads, and this may cause QThread::wait()
to erroneously complain that "Thread tried to wait on itself".
This patch sets the system thread ID to nullptr when the thread is
about to exit and be destroyed by the system.
A regression test is added to tst_qthread.
Fixes: QTBUG-96846
Pick-to: 5.15 6.2
Change-Id: I0850425dd0e09af50e59c9038e7e662a2a624beb
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When the test failed, it never released the blocking slot, so the
tested thread remained blocked indefinitely. Blacklisting doesn't
rescue that: the test run gets killed by Coin's watchdog.
Use a QScopeGuard() to release the clocked slot on failure.
replacing the release that was happening only on success.
As drive-by clean-up, smarten up the code a little and remove an
unused enum.
Pick-to: 6.2 6.1 5.15
Change-Id: Ie035dafe6e4b1d82aea5de38ceb31c0f7fcf81d7
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
|
|
|
|
|
|
|
|
|
|
|
| |
Output object name and class in QCOMPARE(). This should help
to debug flaky QWidget tests that for example check on focusWidget().
[ChangeLog][QtTestLib] QCOMPARE() now reports QObject * values by class and objectName().
Task-number: QTBUG-64446
Change-Id: Ife04e89bba04fc78d077c8f0f07af17a17c9cf8c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
|
|
|
|
|
|
|
|
| |
The emulation detection has been usable only on qtbase tests, move it to
QTest so that it can be used in other modules as well.
Pick-to: 6.1
Change-Id: I4b2321b7856414d7b1cfd5e6b1405a633c6bb878
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
|
|
|
|
|
|
|
|
|
|
|
| |
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fixed the following warnings:
- empty expression statement has no effect; remove unnecessary ';'
to silence this warning
- zero as null pointer constant
- no previous extern declaration for non-static variable
- use of old-style cast
- integer conversion warnings
Change-Id: Ieb31b127ce8e3b543aaf88a8e8fc463dcc8bc4e3
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
|
|
|
|
|
|
|
|
|
| |
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
|
|
|
|
|
|
|
|
|
|
|
| |
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
|
|
|
|
|
|
|
|
|
| |
Resolve remaining Qt6 TODO
[ChangeLog][QtCore][QAbstractEventDispatcher] The signature of the abstract virtual registerTime function now takes a qint64 value for the interval parameter.
Change-Id: I10166ad5cfb455edc404d465a3731ff094a8977e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
| |
They are unused.
Change-Id: I77383f2be45551401ed9c2f88285511134cc8b0d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
mkspecs/features/qt.prf adds a dependency on the system threading
library if the Qt Core thread feature is enabled. Because qt.prf is
loaded by any public or internal Qt project, it's essentially a public
dependency for any Qt consumer.
To mimic that in CMake, we check if the thread feature is enabled, and
and set the Threads::Threads library as a dependency of Qt6::Platform,
which is a public target used by all Qt modules and plugins and Qt
consumers.
We also need to create a Qt6Dependencies.cmake file so we
find_package(Threads) every time find_package(Qt6) is called.
For the .prl files to be usable, we have to filter out some
CMake implementation specific directory separator tokens
'CMAKE_DIRECTORY_ID_SEP' aka '::@', which are added because we call
target_link_libraries() with a target created in a different scope
(I think).
As a result of this change, we shouldn't have to hardcode
Threads::Threads in other projects, because it's now a global public
dependency.
Task-number: QTBUG-85801
Task-number: QTBUG-85877
Change-Id: Ib5d662c43b28e63f7da49d3bd77d0ad751220b31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
|
|
|
|
|
|
|
|
| |
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
|
|
|
|
|
|
|
|
|
|
|
| |
As we require C++17 now. The configure-time test checking for
future/async is left in for the moment being.
Change-Id: Ifde39d420673f70a2277f5a645bfaad30935a381
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
|
|
|
|
|
|
| |
Task-number: QTBUG-84469
Change-Id: Ic80fde5517aed363f17d0da55cadcc958c3c8895
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
|
|
|
|
|
|
|
|
|
| |
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
|
|
|
|
|
|
|
| |
Change-Id: Ib70f000480ffbbb994edd80d9e2c7f5d9e270e0c
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
|
|\
| |
| |
| | |
Change-Id: I3a1d7673c3c20019ab12a2ea0a60f1619920a34c
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
|
| |
| |
| |
| |
| |
| |
| | |
Fixes: QTBUG-78221
Change-Id: Icb4614f8187c16e6b13d9db1dbc6adfcd579db43
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
|
|/
|
|
|
|
|
|
|
|
|
|
| |
This fixes the qatomicinteger magic by making $$basename work for one
particular case.
qthreadstorage still needs investigation.
Task-number: QTBUG-78221
Change-Id: I7bb38f6ca24273bcf0443ab25685c8e815814c3c
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
|
|
|
|
|
|
|
|
| |
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Obtain diagnostics.
Task-number: QTBUG-76707
Change-Id: I051fb43802a9736cb9542f4adaaf5880b52a407e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|
|
|
|
|
|
|
|
|
|
|
| |
Task-number: QTBUG-76707
Change-Id: Iddce10fb3c8259b829d76596ffc9829f8d013bf3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
|