| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If the dialog is closed by pressing a button, the button will be
reflected via clickedButton(), and the result() will reflect either
the QMessageBox::StandardButton value, or an opaque value for custom
buttons.
Depending on the role if the buttons, the accepted or rejected
signals are emitted.
If the user called accept() or rejecct() on a dialog that had
already been closed by a button, we would as a result of
1f70c073d4325bc0eb9b0cec5156c3b89ce1b4df emit a signal based
on the original button that was clicked, instead of respecting
the newly triggered function.
It's a questionable use-case, as the clickedButton() is still
the original button e.g., but we should still avoid regressing
this, so we now emit the signals based on the newly stored
result code instead of using the clicked button as the source
of truth.
To allow this we had to change the opaque result() value for
custom buttons to stay out of the QDialog::DialogCode enum,
but this should be fine as the documentation explicitly says
that this is an opaque value.
Fixes: QTBUG-118226
Pick-to: 6.7 6.6 6.5
Change-Id: Ia2966cecc6694efce66493c401854402658332b4
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
| |
According to QUIP-18 [1], all tests file should be
LicenseRef-Qt-Commercial OR GPL-3.0-only
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: I9657df5d660820e56c96d511ea49d321c54682e8
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
QDialogButtonBox::layoutButtons() rebuilds the focus chain based on the
button layout. It relied on the fact that the last button in the layout
would point back to the first button. That is not the case, if
- a focus frame gets inserted in the chain, and
- the default button is not at the layout's first (=left) position.
In that case, the chain stops at the button left of the default button.
The default button can not be reached by tabbing forward. Back-tabbing
still worked.
By not "closing" the focus chain, the focus proxy was set to the first
button found in the layout. That is wrong, whenever the default button
is not at the first layout position. When the box got focus for the
first time, pressing "Enter" could lead to a non-default button being
triggered. A Yes/No message box would have No as its default button.
On Linux, it would pop up with "No" being highlighted, but "Yes" having
focus. Pressing Enter would trigger Yes, instead of No.
tst_QMessageBox::staticSourceCompat() heuristically defines the
button expected to be triggered by Enter. On Linux/KDE, it would pass,
when the wrong button was fired.
=> Always "close" the focus chain, by linking the last and first
buttons.
=> Make the default button the button box's focus proxy.
=> Change tst_QMessageBox::staticSourceCompat() to always expect No
being fired by Enter in a Yes/No box.
[ChangeLog][QtWidgets][QDialogButtonBox] Default button becomes
focus proxy of a QDialogButtonBox. This ensures that Enter triggers
the default button, instead of the first button in the layout.
Fixes: QTBUG-118489
Pick-to: 6.7 6.6 6.5
Change-Id: Ic626d3d0fe7ba8b924c21734332e98532f11c80e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The test function casts QMessageBox::StandardButton variables to
integers, to pass them as arguments and verify expected buttons.
In case of a test failure, this makes it hard to figure out, why a test
was failing.
Add a local macro to cast int values back to the enum before calling
qCompare(). That way the enum keys will be displayed in the logs.
Task-number: QTBUG-118489
Pick-to: 6.7 6.6 6.5
Change-Id: I23e766d5026cff3e4775db56e58f808809709e4c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
|
|
|
|
|
|
|
|
|
|
|
| |
The test was flaky, because of qWaitForWindowActive() after show().
It is not guaranteed, that a window has focus after show().
Use qWaitForWindowExposed() instead.
Task-number: QTBUG-118489
Pick-to: 6.7 6.6 6.5
Change-Id: I1eb8a73f2beafec00c4a6f6b34bfd36a8d6e4d93
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
|
|
|
|
|
|
|
|
|
| |
Remove if (0) clause.
Task-number: QTBUG-118489
Pick-to: 6.7 6.6 6.5
Change-Id: Ie1c72e9c7cacb90d9e4d85763cd2f6967a7572cd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
QWidget::setVisible is virtual, and called via hide() by both the
QDialog and the QWidget destructor. A dialog that becomes invisible
when getting destroyed will at most execute the QDialog override.
Subclassing QDialog and overriding setVisible() to update the state
of the native platform dialog will not work, unless we explicitly
call hide() in the respective subclass's destructor.
Since e0bb9e81ab1a9d71f2893844ea82, QDialogPrivate::setVisible is
also virtual, and gets called by QDialog::setVisible. So the clean
solution is to move the implementation of the native dialog status
update into an override of QDialogPrivate::setVisible.
Add test that verifies that the transient parent of the dialog
becomes inactive when the (native) dialog shows (and skip if that
fails), and then becomes active again when the (native) dialog is
closed through the destructor of the Q*Dialog class. The test of
QFileDialog has to be skipped on Android for the same reason as the
widgetlessNativeDialog.
Fixes: QTBUG-116277
Pick-to: 6.6 6.5
Change-Id: Ie3f93980d8653b8d933bf70aac3ef90de606f0ef
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
|
|
|
|
|
|
|
|
| |
Nothing in those files uses QPair; and a local build finished fine without them.
Task-number: QTBUG-115841
Change-Id: I669cfecaa9129bce6b31e464826287f138b159db
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As a result of d8bbb5ee0e60d44a70d29306e607a59caf7fe5bc, we
were no longer calling QDialog::done(), which users may have
overridden.
We now pull out the dialog code to determine whether to
emit accepted/rejected directly in done(), so that we
can go back to calling QDialog::done().
Pick-to: 6.6 6.5
Change-Id: Ie08270123d61d9010acd8c989b66986f71960ad0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The native style may not match the program style and it
makes sense to give an option rather than forcing native style.
Before it could only be done with setting AA_DontUseNativeDialogs
on the app, but it is reasonable to use native file dialogs and
Qt styled messageboxes - and it is extremely cumbersome - especially
since messageboxes often can start save dialogs.
It can look a bit strange that these introduced options has just one
option (DontUseNativeDialog) and four functions, but this way it works
similar to QColorDialog, QFileDialog and QFontDialog.
[ChangeLog][QWidgets][QMessageBox] Added options functionality to
QMessagebox. The currently only option available is DontUseNativeDialog.
Change-Id: I70282fcfaa66f245f7e679b8897c607bcaff333f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Clients who called the base-class implementation in QDialog would
as a result start hitting the canBeNativeDialog code path at the
start of QDialog::setVisible(), which would show the native dialog,
but without updating the QWidget visibility state.
To keep things 100% compatible, we shuffle the implementation of
QDialog::setVisible() into QDialogPrivate, which allows us to
override it in QMessageBoxPrivate and QErrorMessagePrivate.
The existing subclasses of QDialog that override setVisible have
been left as is, to not cause any unintended behavior change.
Pick-to: 6.5
Change-Id: Icafe31a7b84a75049365e4e04b80492de08614d2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The native implementation uses NSAlert, making a best effort to map the
QMessageBox properties to the native dialog, falling back to the cross
platform non-native dialog if the discrepancy is too big.
The initial implementation focuses on the current state of the
native dialog helper "protocol", but there's room for improvement
here, which would allow even more dialog types and properties to
be native.
[ChangeLog][macOS] Message boxes such as QMessageBox now follow
the platform look and feel by using native dialogs if possible.
Change-Id: I4da33f99894194a7b301628cd1fbb44d646ddf18
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
|
|
|
|
|
|
|
|
|
|
| |
* Wrap some tests that specifically test deprecated APIs
into #ifdefery
* Refactor some tests to use available methods
Task-number: QTBUG-104858
Change-Id: I03e318004ce1c2718ee574bf11e00df9bc04bcaa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
|
|
|
|
|
| |
Change-Id: Ibc6a948480a904913a5427e6408d4d296784fb4f
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The system behavior is to not show these kinds of dialogs as modal,
and we've documented that for QMessageBox.
However, calling show() instead of exec() is not enough, as the
default constructor of QMessageBox will set the modality of the
widget to application-modal. We need to explicitly override this.
[ChangLog][macOS] QMessageBox::about(Qt) now shows dialog non-modal,
as documented.
Pick-to: 6.2
Change-Id: I6bb59efb81feb23122276a9eede71b2f20c9d7c6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
|
| |
When showing a messagebox that has already been show we don't want to
keep around the clicked button of the previous invocation.
Pick-to: 6.2
Change-Id: Ib6f6293d40ab338c550ea344094db871ccf45c46
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Those overloads have been documented as obsolete, but never been deprecated.
Add the deprecation macros to trigger warnings as of Qt 6.2.
The overloads taking a single StandardButton should not be deprecated until
Qt 7, as otherwise porting from old to new API will require an unnecessary
cast to StandardButtons for calls with only a single enum value.
The unit test explicitly tests the deprecated members, so disable warnings
there.
Fixes: QTBUG-92483
Change-Id: I283ddce4681eafda2378607f999946e56bbb777e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
|
|
|
|
|
|
|
|
|
|
|
| |
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
| |
Change lots of code to avoid the deprecated operator+() or implicit
casts to int.
Change-Id: I0c343cd5b28603afdf1214eefb85e928313345e2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
|
|
|
|
|
|
| |
Task-number: QTBUG-84469
Change-Id: I490fdb237afad2d8a15954fe34d6b549a83fa4aa
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
|
| |
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This has been flaky on OpenSuSE; if the stored geom.topLeft() is 0,0
it apparently means the window manager (probably kwin) didn't get around
to decorating and repositioning the dialog by the time
qWaitForWindowExposed() returns. Because we check later to see whether
it moved, we need to be certain of its initial position.
Waiting for the extra "fleece" widget to be shown was based on the
theory that by the time the X server has processed messages related
to that new window, the WM should be done processing the consequences
of the resized dialog window. But there's no such guarantee, so let's
try removing that. On the other hand, removing the delay does open
us up to miss a regression (maybe the dialog gets moved after we have
checked that it didn't move).
Rename because we don't name autotests after bugs.
Amends 26ddb586acd49834c7cffac781ce504ec78635cc
Task-number: QTBUG-32473
Change-Id: I6bbfe2b4baaee389db0d4112f0fec3b7cb9da554
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Liang Qi <liang.qi@qt.io>
|
|
|
|
|
|
|
| |
Task-number: QTBUG-44131
Change-Id: Ic092f2be5855840d6467560159c12f3c5aa36344
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When a button added to QMessageBox has AcceptRole or YesRole, the signal
accepted() will be emitted upon click on the button. If the button has
RejectRole or NoRole, the signal rejected() will be emitted upon click
on the button. If a button has a different role, neither accepted() nor
rejected() will be emitted. This works for both standard and custom
buttons.
The signal finished() with result code will be sent regardless of a
clicked button role.
Also added documentation strings for some methods of private classes in
order to have better tooltips in IDE(s).
Task-number: QTBUG-44131
Change-Id: I521a4e5112eb4cf168f6fbb4c002dbe119aeeb09
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
|
|
|
|
|
|
|
|
|
|
| |
Changed 0 to nullptr, used more C++-style casts, simplified some
code for searching a button, and changed foreach to range-based for
loop.
Task-number: QTBUG-44131
Change-Id: I211b12751b0e2591d1d14294c31b51d52bb4e3f6
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
|
|\
| |
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
src/corelib/global/qconfig-bootstrapped.h
src/plugins/platforms/xcb/qxcbbackingstore.cpp
Done-with: Gatis Paeglis <gatis.paeglis@qt.io>
Change-Id: I4af138ffb2f5306373244523768209e8873b2798
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
QMessageBox window ignores QCloseEvent if it was created
with Ok button and the detailed text was set. But it can
be closed if it contains only one button.
Make it closable if there are two buttons and one of them
is the "Show Details..." button.
[ChangeLog][QtWidgets][QMessageBox] A message box with two
buttons, one of which is the "Show Details..." button,
can be closed by clicking the X button on the window's
title bar.
Task-number: QTBUG-69526
Change-Id: Iba09e38561eb3898dc2aecfd38d8519d512a71c1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
|
|/
|
|
|
| |
Change-Id: I2d31c2e9513944ba722b59ac69e91973a7aabba5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
examples/network/fortuneclient/client.cpp
examples/network/fortuneserver/server.cpp
src/platformsupport/platformcompositor/qopenglcompositorbackingstore_p.h
src/plugins/platforms/cocoa/qcocoabackingstore.h
src/plugins/platforms/cocoa/qcocoaintegration.h
src/plugins/platforms/cocoa/qcocoascreen.h
src/plugins/platforms/ios/qiosbackingstore.h
src/plugins/sqldrivers/oci/qsql_oci.cpp
src/widgets/kernel/qwidgetwindow.cpp
Change-Id: Ia6dd2c52d4a691b671cf9a2ffca70deccece8f10
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
|
|
|
|
|
|
|
|
|
|
|
| |
These tests need fixing, but they are already partially blacklisted
and need investigation once the switch is completed.
Task-number: QTQAINFRA-1292
Task-number: QTQAINFRA-1355
Task-number: QTQAINFRA-1362
Change-Id: Ic50d0c4a01ee7e72be1129d418eff244ba783185
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|
|
|
|
|
|
|
|
| |
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
src/corelib/io/qprocess.cpp
src/corelib/io/qprocess_unix.cpp
src/network/kernel/qnetworkinterface_winrt.cpp
tools/configure/configureapp.cpp
Change-Id: I47df00a01597d2e63b334b492b3b4221b29f58ea
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Introduce class ExecCloseHelper which runs a timer
timer checking for the test candidate to become
the active modal window and closing it either
by key event or calling close.
The test then runs in 4s as opposed to 45s before.
Task-number: QTBUG-38890
Change-Id: I610fb09e6b8269d218cddc8d11abae2bd3317f9d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
|
|/
|
|
|
|
|
| |
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Ie29640451dddeb58342038a8cd5fac152cce39e5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
|
|
|
|
|
|
| |
Task-number: QTBUG-46374
Change-Id: I7bc633ab551740bd328a24b0ccae1d534af47138
Reviewed-by: Martin Smith <martin.smith@digia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
|
|
|
|
|
|
|
|
|
| |
- Renamed LICENSE.LGPL to LICENSE.LGPLv21
- Added LICENSE.LGPLv3
- Removed LICENSE.GPL
Change-Id: Iec3406e3eb3f133be549092015cefe33d259a3f2
Reviewed-by: Iikka Eklund <iikka.eklund@digia.com>
|
|
|
|
|
|
|
|
|
|
| |
Store the value of QMessageBoxPrivate::autoAddOkButton
temporarily when automatically adding the "Show Details..."
button.
Task-number: QTBUG-39334
Change-Id: I173c83893548ee83b3d8ea2743f87686c32657e7
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Center gravity doesn't mean center the window, it only affects the
method of converting between internal window bounds and decorated bounds.
So wanting to have each dialog centered w.r.t. its transient parent
is not a reason for using center gravity. Instead it caused the
bug that when you resize a QMessageBox by clicking the Show Details
button, it jumps downwards on the screen.
Task-number: QTBUG-32473
Change-Id: I3fabf3caa1e4d10fd4f7508e297f73efe5cc51b6
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
|
|
|
|
|
| |
Change-Id: Ic804938fc352291d011800d21e549c10acac66fb
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy, pluginizing etc. without
worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QMacStyle directly.
Change-Id: I44a2f5ee3fe08ecc837b593a2a2737eb90e8c267
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
|
|
|
|
|
|
|
|
|
| |
We have a new style Fusion that will replace these styles.
They will be moved to a separate
module rather than included in platforms that do not need them.
Change-Id: I51ebbcad5406e99130e5b12e62ba624d1489088c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
|