Merge remote-tracking branch 'origin/5.6' into 5.7

* origin/5.6:
  Doc: Remove generic Device Creation documentation

Conflicts:
	src/doc/config/b2qt-project.qdocconf
	src/doc/src/devices/qtee-bd-sl-imx6.qdoc
	src/doc/src/devices/qtee-beaglebone-black.qdoc
	src/doc/src/devices/qtee-kontron-smarc-samx6i.qdoc
	src/doc/src/devices/qtee-raspberry-pi.qdoc
	src/doc/src/devices/qtee-sabre-sd-imx6.qdoc
	src/doc/src/devices/qtee-supported-devices.qdoc
	src/doc/src/devices/qtee-toradex-apalis.qdoc
	src/doc/src/devices/qtee-toradex-colibri-imx6.qdoc
	src/doc/src/devices/qtee-toradex-colibri-vf.qdoc
	src/doc/src/qtee-changelog.qdoc
	src/doc/src/qtee-custom-embedded-linux.qdoc
	src/doc/src/qtee-index.qdoc
	src/doc/src/qtee-static-linking.qdoc
	src/doc/src/shared/detect-sd-card-device-name.qdocinc

Change-Id: I52b87c5c383c6419a35d06cb2a0c87073c9d3c85

1 files changed, 0 insertions, 66 deletions

diff --git a/src/doc/src/devices/qtee-raspberry-pi.qdoc b/src/doc/src/devices/qtee-raspberry-pi.qdoc
deleted file mode 100644
index d634be2..0000000
--- a/src/doc/src/devices/qtee-raspberry-pi.qdoc
+++ /dev/null
@@ -1,66 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2014 Digia Plc
-** All rights reserved.
-** For any questions to Digia, please use the contact form at
-** http://www.qt.io
-**
-** This file is part of Qt Enterprise Embedded.
-**
-** Licensees holding valid Qt Enterprise licenses may use this file in
-** accordance with the Qt Enterprise License Agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.
-**
-** If you have questions regarding the use of this file, please use
-** the contact form at http://www.qt.io
-**
-****************************************************************************/
-/*!
-    \keyword Raspberry Pi 3 Model B
-    \page qtee-preparing-hardware-rasberrypi.html
-    \title Preparing Raspberry Pi 3
-    \previouspage qtee-installation-guide.html
-    \nextpage qtee-building-and-running.html
-
-    Take the following steps to prepare a  \l{https://www.raspberrypi.org/products/raspberry-pi-3-model-b/}
-    {Raspberry Pi 3} for \B2Q.
-
-    \note It is important that you repeat the steps in this section after you
-    update \SDK.
-
-    The image containing \B2Q stack for Raspberry Pi 3 is included in the SDK,
-    ready to be copied to an SD card.
-
-    \section1 Preparing an SD Card
-
-    An SD card of at least 1 GB capacity is sufficient.
-
-    \include detect-sd-card-device-name.qdocinc instructions
-
-    \section1 Installing the \B2Q Image
-
-    \include common.qdocinc wizard
-
-    To write the image to the SD card, ensure that no partitions on the
-    SD card are mounted:
-
-    \include detect-sd-card-device-name.qdocinc unmount
-
-    Then, enter the following command to deploy the image:
-
-    \badcode
-        cd <INSTALL_DIR>
-        sudo dd bs=4k if=5.7/Boot2Qt/raspberrypi3/images/b2qt-embedded-qt5-image-raspberrypi3.img of=/dev/<device_name>
-    \endcode
-
-    After the image has been deployed, insert the SD card, power on the device and check that
-    the \B2Q welcome screen and/or demo appear.
-
-    \section1 Configuring a Device Kit in Qt Creator
-
-    \include b2qt-post-install-setup.qdocinc configuring network device
-
-    You are now ready to start developing for your device. For more information,
-    see \l{Building and Running an Example}.
-*/