diff options
-rw-r--r-- | src/doc/src/devices/qtee-architech-tibidabo.qdoc | 2 | ||||
-rw-r--r-- | src/doc/src/devices/qtee-bd-sl-imx6.qdoc | 2 | ||||
-rw-r--r-- | src/doc/src/devices/qtee-beaglebone-black.qdoc | 2 | ||||
-rw-r--r-- | src/doc/src/devices/qtee-raspberry-pi.qdoc | 2 | ||||
-rw-r--r-- | src/doc/src/devices/qtee-sabre-sd-imx6.qdoc | 4 | ||||
-rw-r--r-- | src/doc/src/devices/qtee-toradex-apalis.qdoc | 2 | ||||
-rw-r--r-- | src/doc/src/devices/qtee-toradex-colibri-vf.qdoc | 2 | ||||
-rw-r--r-- | src/doc/src/qtee-custom-embedded-linux.qdoc | 8 |
8 files changed, 12 insertions, 12 deletions
diff --git a/src/doc/src/devices/qtee-architech-tibidabo.qdoc b/src/doc/src/devices/qtee-architech-tibidabo.qdoc index a8b8214..87d070a 100644 --- a/src/doc/src/devices/qtee-architech-tibidabo.qdoc +++ b/src/doc/src/devices/qtee-architech-tibidabo.qdoc @@ -49,7 +49,7 @@ \badcode cd <INSTALL_DIR> - sudo ./Boot2Qt-4.x/tibidabo-eLinux/images/deploy.sh /dev/<device_name> + sudo 5.5/Boot2Qt/tibidabo-eLinux/images/deploy.sh /dev/<device_name> \endcode After the installation is complete, insert the SD card, power on the device and check that diff --git a/src/doc/src/devices/qtee-bd-sl-imx6.qdoc b/src/doc/src/devices/qtee-bd-sl-imx6.qdoc index 68f32cd..2b68a28 100644 --- a/src/doc/src/devices/qtee-bd-sl-imx6.qdoc +++ b/src/doc/src/devices/qtee-bd-sl-imx6.qdoc @@ -67,7 +67,7 @@ \badcode cd <INSTALL_DIR> - sudo ./Boot2Qt-4.x/iMX6-eLinux/images/deploy.sh /dev/<device_name> + sudo 5.5/Boot2Qt/iMX6-eLinux/images/deploy.sh /dev/<device_name> \endcode After the installation is complete, insert the SD card, power on the device and check that diff --git a/src/doc/src/devices/qtee-beaglebone-black.qdoc b/src/doc/src/devices/qtee-beaglebone-black.qdoc index ea7d745..dc9dce9 100644 --- a/src/doc/src/devices/qtee-beaglebone-black.qdoc +++ b/src/doc/src/devices/qtee-beaglebone-black.qdoc @@ -49,7 +49,7 @@ \badcode cd <INSTALL_DIR> - sudo ./Boot2Qt-4.x/beaglebone-eLinux/images/deploy.sh /dev/<device_name> + sudo 5.5/Boot2Qt/beaglebone-eLinux/images/deploy.sh /dev/<device_name> \endcode After the installation is complete, insert the SD card, power on the device and check that diff --git a/src/doc/src/devices/qtee-raspberry-pi.qdoc b/src/doc/src/devices/qtee-raspberry-pi.qdoc index 60fb6af..b272f71 100644 --- a/src/doc/src/devices/qtee-raspberry-pi.qdoc +++ b/src/doc/src/devices/qtee-raspberry-pi.qdoc @@ -56,7 +56,7 @@ \badcode cd <INSTALL_DIR> - sudo Boot2Qt-4.x/raspberrypi-eLinux/images/deploy.sh /dev/<device_name> + sudo 5.5/Boot2Qt/raspberrypi-eLinux/images/deploy.sh /dev/<device_name> \endcode After the image has been deployed, insert the SD card, power on the device and check that diff --git a/src/doc/src/devices/qtee-sabre-sd-imx6.qdoc b/src/doc/src/devices/qtee-sabre-sd-imx6.qdoc index a0a9d24..819da9f 100644 --- a/src/doc/src/devices/qtee-sabre-sd-imx6.qdoc +++ b/src/doc/src/devices/qtee-sabre-sd-imx6.qdoc @@ -56,7 +56,7 @@ \badcode cd <INSTALL_DIR> - sudo Boot2Qt-4.x/imx6qsabresd-eLinux/images/deploy.sh /dev/<device_name> + sudo 5.5/Boot2Qt/imx6qsabresd-eLinux/images/deploy.sh /dev/<device_name> \endcode To deploy the image on \b {i.MX6Dual}, you need to enter an additional boot @@ -64,7 +64,7 @@ \badcode cd <INSTALL_DIR> - sudo Boot2Qt-4.x/imx6qsabresd-eLinux/images/deploy.sh --uboot u-boot-imx6dlsabresd.imx /dev/<device_name> + sudo 5.5/Boot2Qt/imx6qsabresd-eLinux/images/deploy.sh --uboot u-boot-imx6dlsabresd.imx /dev/<device_name> \endcode After the image has been deployed, insert the SD card, power on the device and check that diff --git a/src/doc/src/devices/qtee-toradex-apalis.qdoc b/src/doc/src/devices/qtee-toradex-apalis.qdoc index 5a9d7bb..8d04b6e 100644 --- a/src/doc/src/devices/qtee-toradex-apalis.qdoc +++ b/src/doc/src/devices/qtee-toradex-apalis.qdoc @@ -51,7 +51,7 @@ \badcode cd <INSTALL_DIR> - sudo Boot2Qt-4.x/apalis-imx6-eLinux/images/deploy.sh /dev/<device_name> + sudo 5.5/Boot2Qt/apalis-imx6-eLinux/images/deploy.sh /dev/<device_name> \endcode By default, the Toradex Apalis iMX6 boots from its internal eMMC. In order to boot from diff --git a/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc b/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc index 5753256..7329fbf 100644 --- a/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc +++ b/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc @@ -53,7 +53,7 @@ \badcode cd <INSTALL_DIR> - sudo Boot2Qt-4.x/colibri-vf-eLinux/images/deploy.sh /dev/<device_name> + sudo 5.5/Boot2Qt/colibri-vf-eLinux/images/deploy.sh /dev/<device_name> \endcode By default, the Toradex Colibri VF devices boot from their internal NAND memory. In order to boot from diff --git a/src/doc/src/qtee-custom-embedded-linux.qdoc b/src/doc/src/qtee-custom-embedded-linux.qdoc index 2da45cf..19771d3 100644 --- a/src/doc/src/qtee-custom-embedded-linux.qdoc +++ b/src/doc/src/qtee-custom-embedded-linux.qdoc @@ -68,7 +68,7 @@ \badcode cd <BuildDir> - <INSTALL_DIR>/Boot2Qt-4.x/sources/b2qt-yocto-meta/b2qt-init-build-env init --device raspberrypi + <INSTALL_DIR>/5.5/Boot2Qt/sources/b2qt-yocto-meta/b2qt-init-build-env init --device raspberrypi \endcode \c b2qt-init-build-env has the following additional command line options: @@ -81,7 +81,7 @@ For all command line options, see: \badcode - <INSTALL_DIR>/Boot2Qt-4.x/sources/b2qt-yocto-meta/b2qt-init-build-env help + <INSTALL_DIR>/5.5/Boot2Qt/sources/b2qt-yocto-meta/b2qt-init-build-env help \endcode \section1 Building the Image and Toolchain @@ -153,7 +153,7 @@ script. Using Raspberry Pi as an example: \badcode - <INSTALL_DIR>/Boot2Qt-4.x/sources/b2qt-build-scripts/embedded-common/init_build_env.sh <INSTALL_DIR>/Boot2Qt-4.x/sources/b2qt-build-scripts/embedded-linux/config.raspberrypi + <INSTALL_DIR>/5.5/Boot2Qt/sources/b2qt-build-scripts/embedded-common/init_build_env.sh <INSTALL_DIR>/5.5/Boot2Qt/sources/b2qt-build-scripts/embedded-linux/config.raspberrypi \endcode \note You can use the same build directory for Qt and the Yocto image. @@ -178,7 +178,7 @@ developing for your device. The following script does this for you. \badcode - <INSTALL_DIR>/Boot2Qt-4.x/sources/b2qt-build-scripts/embedded-common/setup_qtcreator.sh + <INSTALL_DIR>/5.5/Boot2Qt/sources/b2qt-build-scripts/embedded-common/setup_qtcreator.sh \endcode This will set up a new kit in Qt Creator, using the toolchain and Qt from |