diff options
Diffstat (limited to 'tests/systemtests/radio')
-rw-r--r-- | tests/systemtests/radio/sys_radio.qtt | 286 |
1 files changed, 0 insertions, 286 deletions
diff --git a/tests/systemtests/radio/sys_radio.qtt b/tests/systemtests/radio/sys_radio.qtt deleted file mode 100644 index 81e911c2d..000000000 --- a/tests/systemtests/radio/sys_radio.qtt +++ /dev/null @@ -1,286 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2016 The Qt Company Ltd and/or its subsidiary(-ies). -** Contact: https://www.qt.io/licensing/ -** -** This file is part of the Qt Mobility Components. -** -** $QT_BEGIN_LICENSE:GPL-EXCEPT$ -** Commercial License Usage -** Licensees holding valid commercial Qt licenses may use this file in -** accordance with the commercial license agreement provided with the -** Software or, alternatively, in accordance with the terms contained in -** a written agreement between you and The Qt Company. For licensing terms -** and conditions see https://www.qt.io/terms-conditions. For further -** information use the contact form at https://www.qt.io/contact-us. -** -** GNU General Public License Usage -** Alternatively, this file may be used under the terms of the GNU -** General Public License version 3 as published by the Free Software -** Foundation with exceptions as appearing in the file LICENSE.GPL3-EXCEPT -** included in the packaging of this file. Please review the following -** information to ensure the GNU General Public License requirements will -** be met: https://www.gnu.org/licenses/gpl-3.0.html. -** -** $QT_END_LICENSE$ -** -****************************************************************************/ - -//TESTED_COMPONENT=src/multimedia - -testcase = { - -/* Notes -Ensure radio reception is available in testing area -Most tier 1 platforms require a radio module -A device specific headset is required to be connected to device for radio testing -*/ - - initTestCase: function() - { - }, - - play_a_radio_transmission: function() - { - // Test meta data - testTitle = "Multimedia - Play Radio Transmission"; - testBinary = "radio"; - testSource ="qt5/qtmultimedia/examples/radio" - testGoal = "Verify that radio stations can be played."; - testPreconditions = "1. Radio reception should be available in the test area.<br>2. Device must have a suppported radio module."; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | | If not first time running application on image, verify that you are presented with a list of previously scanned radio stations | - | Select a radio station from the list | Verify that the station is properly selected | - | Select the power icon next to the station name | Verify that audio from the radio station is now heard through the headphones | - | Deselect the power icon next to the station name | Verify that audio from the radio station is no longer heard through the headphones | - | Exit the radio application | Verify that the radio application closes cleanly | - ")); - }, - - change_a_radio_station: function() - { - // Test meta data - testTitle = "Multimedia - Radio: Change radio station"; - testBinary = "radio"; - testSource ="qt5/qtmultimedia/examples/radio" - testGoal = "Verify that radio station can be changed from station playlist."; - testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select a radio station from the list | Verify that the station is heard through the headphones | - | If in the visualization view, select the down icon to return to the station selection view | Verify that you are presented with the list of stations | - | Select a different station | Verify that you are now listening to a different radio station | - | Deselect the power icon next to the station name | Verify that audio from the radio station is no longer heard through the headphones | - | Exit the radio application | Verify that the radio application closes cleanly | - ")); - }, - - manually_tune_radio_station: function() - { - // Test meta data - testTitle = "Multimedia - Manually tune radio station"; - testBinary = "radio"; - testSource ="qt5/qtmultimedia/examples/radio" - testGoal = "Verify that user can manually change radio station."; - testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select a radio station from the list | Verify that the station is heard through the headphones | - | Select the up icon to be presented to the visualization view | | - | Select the Plus icon on the menu bar | Verify that you are presented with the frequency dial | - | Note the current selected frequency | | - | Select the dot indicator on the frequency dial, and move finger to right | Verify that the frequency on the indicator is now rising and that the audio has gone off the previous station | - | Keep moving selector until a radio station is heard | Verify that the frequency of the selected station is higher than the originally selected station | - | | Verify that the station is playing properly | - | Select to save the selected radio station frequency | Verify that the station is saved in the radio station playlist | - | Exit the radio application | Verify that the radio application closes cleanly | - ")); - }, - - scan_up_and_down: function() - { - // Test meta data - testTitle = "Multimedia - Scan up and down the frequency"; - testBinary = "radio"; - testSource ="qt5/qtmultimedia/examples/radio" - testGoal = "Verify that radio can scan up and down the FM frequency."; - testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select a radio station from the list | Verify that the station is heard through the headphones | - | Select the up icon to be presented to the visualization view | | - | Select the Plus icon on the menu bar | Verify that you are presented with the frequency dial | - | Note the current selected frequency | | - | Select the Scan Up Frequency control | Verify that application has located a new station and that the frequency displayed is of the new station | - | | Verify that the station is playing properly | - | Select to save the selected radio station frequency | Verify that the station is saved in the radio station playlist | - | Select the Scan Down Frequency control | Verify that application has located the original station and that the frequency displayed is of the original station | - | | Verify that the station is playing properly | - | Select to save the selected radio station frequency | Verify that the station is saved in the radio station playlist | - | Exit the radio application | Verify that the radio application closes cleanly | - ")); - }, - - scan_for_multiple_radio_stations: function() - { - // Test meta data - testTitle = "Multimedia - Radio: Scan for multiple radio station"; - testBinary = "radio"; - testSource ="qt5/qtmultimedia/examples/radio" - testGoal = "Verify that radio can scan for multiple stations at once."; - testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | On the menu, select Find new station | In the Radio Dialog Scanning view, observe the number of stations found | - | Exit the radio application | Verify that the radio application closes cleanly | - ")); - }, - - save_radio_station_list: function() - { - // Test meta data - testTitle = "Multimedia - Radio: Save station playlist"; - testBinary = "radio"; - testSource ="qt5/qtmultimedia/examples/radio" - testGoal = "Verify that radio can save station playlist."; - testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select to scan for multiple stations | Verify that multiple stations have been found | - | Select to save station playlist | | - | Close application | Verify that the application closes | - | Reopen " + testBinary + " | Verify that the app launches normally | - | Go to station playlist | Verify that the stations from the previous search are listed | - | Select various stations from playlist | Verify that radio station play properly | - | Close application | Verify that radio application closes properly | - ")); - }, - - - radio_interrupted_by_system_notification: function() - { - // Test meta data - testTitle = "Multimedia - Radio interrupted by System Notification"; - testBinary = "radio"; - testSource ="$QTDIR/qtmultimediakit/examples/Radio" - testGoal = "Verify that radio can recover audio playback from various system notifications."; - testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Locate a strong radio station signal by scanning up/down | | - | While on a strong and audible radio signal, evoke a system notification on device (eg: alarm notification) | Verify that the radio has muted, and after the system notification has been delivered, the radio reverts to outputting the audio signal back through the headphones | - | While on a strong and audible radio signal, call the device | Verify that the radio has been muted, and stays muted during the duration of the call, and resumes once the call has ended | - | Close application | Verify that radio application closes properly | - ")); - }, - - radio_volume_control: function() - { - // Test meta data - testTitle = "Multimedia - Radio Volume Control"; - testBinary = "radio"; - testGoal = "Verify that the radio volume can be controlled via volume controls."; - testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Locate a strong radio station signal by scanning up or down the frequency | | - | While on a strong and audible radio signal, move volume slider to the right | Verify that the audio volume of the radio station is amplified | - | Move volume slider to the left | Verify that the audio volume is lowered | - | Move the volume slider all the way to the left | Verify that the sound is now completely muted | - | Return the volume to a value above 50% and click the Mute/unmute command | Verify that the audio changes from being muted to unmuted and back | - ")); - }, - - display_radio_metadata: function() - { - // Test meta data - testTitle = "Multimedia - Display Radio Meta data"; - testBinary = "radio"; - testGoal = "Verify that the radio API can display properly formatted meta data."; - testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Locate a strong radio station signal by scanning up or down the frequency | Verify that the Frequency field is populated with the correct frequency for the given radio station | - | | Verify that the Volume field is displaying the proper volume % | - | Click on the Mute/Unmute command | Verify that Muted field changes from 'false' to 'true' and back | - | | If applicable, confirm that the Station Name field is properly displayed | - | | If applicable, confirm that the Station Id field is properly displayed | - | | If applicable, confirm that the Program Type field is properly displayed | - | | If applicable, confirm that the Radio Text field is properly displayed | - ")); - }, -} |