Remove qtquickcontrols2 sources and explain where they wentHEADdev

Now that qtquickcontrols2 has been merged into qtdeclarative,
we should make it obvious that this repo should no longer be
used, by preventing it from being built.

Task-number: QTBUG-95173
Pick-to: 6.2
Change-Id: I95bd6a214f3d75a865ab163ee0a1f9ffbeb7a051
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>

1 files changed, 0 insertions, 204 deletions

diff --git a/src/quickcontrols2/doc/src/qtquickcontrols2-configuration.qdoc b/src/quickcontrols2/doc/src/qtquickcontrols2-configuration.qdoc
deleted file mode 100644
index 8ac2b275..00000000
--- a/src/quickcontrols2/doc/src/qtquickcontrols2-configuration.qdoc
+++ /dev/null
@@ -1,204 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2017 The Qt Company Ltd.
-** Contact: https://www.qt.io/licensing/
-**
-** This file is part of the documentation of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:FDL$
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and The Qt Company. For licensing terms
-** and conditions see https://www.qt.io/terms-conditions. For further
-** information use the contact form at https://www.qt.io/contact-us.
-**
-** GNU Free Documentation License Usage
-** Alternatively, this file may be used under the terms of the GNU Free
-** Documentation License version 1.3 as published by the Free Software
-** Foundation and appearing in the file included in the packaging of
-** this file. Please review the following information to ensure
-** the GNU Free Documentation License version 1.3 requirements
-** will be met: https://www.gnu.org/licenses/fdl-1.3.html.
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-/*!
-    \page qtquickcontrols2-configuration.html
-    \keyword Qt Quick Controls Configuration File
-    \title Qt Quick Controls Configuration File
-    \keyword Qt Quick Controls 2 Configuration File
-
-    Qt Quick Controls support a special configuration file, \c qtquickcontrols2.conf,
-    which is built into an application's resources.
-
-    The configuration file can specify the preferred style and certain style-specific
-    attributes. The following example specifies that the preferred style is the \l {Material style}.
-    Furthermore, when the application is run with the Material style, its theme is light and the
-    accent and primary colors are teal and blue grey, respectively. However, if the application
-    is run with the \l {Universal style} instead, the accent color is red and the appropriate theme
-    is chosen based on the system theme colors.
-
-    \code
-    [Controls]
-    Style=Material
-
-    [Universal]
-    Theme=System
-    Accent=Red
-
-    [Material]
-    Theme=Light
-    Accent=Teal
-    Primary=BlueGrey
-    \endcode
-
-    It is possible to specify a custom location for the configuration file with
-    the \l {Supported Environment Variables in Qt Quick Controls}
-    {QT_QUICK_CONTROLS_CONF} environment variable.
-
-    \section1 Controls Section
-
-    The following values can be specified in a \c Controls section of the
-    configuration file:
-
-    \table
-        \header
-            \li Variable
-            \li Description
-        \row
-            \li \c Style
-            \li Specifies the style to run the application with.
-                The value can be the name of one of the \l {Available Styles}{built-in styles}
-                or a \l {Creating a Custom Style}{custom style}.
-        \row
-            \li \c FallbackStyle
-            \li Specifies the style to use for controls that are not implemented.
-                The style must be one of the \l {Available Styles}{built-in styles}.
-                By default, the \l {Basic Style}{Basic} style is used.
-    \endtable
-
-    \section1 Imagine Section
-
-    The following table lists values that can be used to configure the
-    \l {Imagine style} in an \c Imagine section of the configuration file:
-
-    \include qquickimaginestyle.qdocinc conf
-
-    \section1 Material Section
-
-    The following table lists values that can be used to configure the
-    \l {Material style} in a \c Material section of the configuration file:
-
-    \include qquickmaterialstyle.qdocinc conf
-
-    \section1 Universal Section
-
-    The following table lists values that can be used to configure the
-    \l {Universal style} in a \c Universal section of the configuration file:
-
-    \include qquickuniversalstyle.qdocinc conf
-
-    \section1 Font Configuration
-
-    The default \l {Control::font}{font} can be specified in a \c Font sub-group
-    in each style's section in the configuration file. The \c Font sub-group can
-    be defined in two alternative ways:
-
-    \code
-    [Basic]
-    Font\Family=Open Sans
-    Font\PixelSize=20
-
-    [Material\Font]
-    Family=Open Sans
-    PixelSize=20
-    \endcode
-
-    Supported font attributes:
-    \table
-        \header
-            \li Variable
-            \li Description
-        \row
-            \li \c Family
-            \li The \l {QFont::family}{font family}.
-        \row
-            \li \c PointSize
-            \li The \l {QFont::pointSizeF}{point size}.
-        \row
-            \li \c PixelSize
-            \li The \l {QFont::pixelSize}{pixel size}.
-        \row
-            \li \c StyleHint
-            \li The \l {QFont::styleHint}{style hint}.
-                Available values: \c SansSerif, \c Helvetica, \c Serif, \c Times, \c TypeWriter, \c Courier,
-                                  \c OldEnglish, \c Decorative, \c Monospace, \c Fantasy, \c Cursive.
-        \row
-            \li \c Weight
-            \li The \l {QFont::}{weight}. Qt uses a weighting scale from \c 1 to \c 1000 compatible with OpenType. A weight of \c 1 will be thin,
-                whilst \c 1000 will be extremely black.
-                Available pre-defined weights: \c Thin (100), \c ExtraLight (200), \c Light (300), \c Normal (400),
-                                               \c Medium (500), \c DemiBold (600), \c Bold (700), \c ExtraBold (800),
-                                               \c Black (900).
-        \row
-            \li \c Style
-            \li The \l {QFont::}{style}.
-                Available values: \c StyleNormal, \c StyleItalic, \c StyleOblique.
-    \endtable
-
-    \section1 Palette Configuration
-
-    The default \c palette can be configured for each style using the
-    \c Palette sub-group in the configuration file. The \c Palette sub-group can be
-    defined in two alternative ways:
-
-    \code
-    [Fusion]
-    Palette\Window=#dedede
-    Palette\WindowText=#212121
-    \endcode
-
-    or:
-    \code
-    [Fusion\Palette]
-    Window=#dedede
-    WindowText=#212121
-    \endcode
-
-    See \l [QtQuick]{Palette} QML type for more information.
-
-    \section1 Using the Configuration File in a Project
-
-    In order to make it possible for Qt Quick Controls to find the configuration file,
-    it must be built into application's resources using the \l {The Qt Resource System}.
-    Here's an example \c .qrc file:
-
-    \code
-    <!DOCTYPE RCC><RCC version="1.0">
-    <qresource prefix="/">
-        <file>qtquickcontrols2.conf</file>
-    </qresource>
-    </RCC>
-    \endcode
-
-    \note Qt Quick Controls uses a file selector to load the configuration file. It
-    is possible to provide a different configuration file for different platforms and
-    locales. See \l QFileSelector documentation for more details.
-
-    Finally, the \c .qrc file must be listed in the application's \c .pro file so that
-    the build system knows about it. For example:
-
-    \code
-    RESOURCES = application.qrc
-    \endcode
-
-    \section1 Related Information
-
-    \list
-      \li \l{Styling Qt Quick Controls}
-      \li \l{Supported Environment Variables in Qt Quick Controls}
-    \endlist
-*/