diff options
Diffstat (limited to '8.31/config.h.in')
| -rw-r--r-- | 8.31/config.h.in | 291 |
1 files changed, 291 insertions, 0 deletions
diff --git a/8.31/config.h.in b/8.31/config.h.in new file mode 100644 index 0000000..044ab1d --- /dev/null +++ b/8.31/config.h.in @@ -0,0 +1,291 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + + +/* On Unix-like systems config.h.in is converted by "configure" into config.h. +Some other environments also support the use of "configure". PCRE is written in +Standard C, but there are a few non-standard things it can cope with, allowing +it to run on SunOS4 and other "close to standard" systems. + +If you are going to build PCRE "by hand" on a system without "configure" you +should copy the distributed config.h.generic to config.h, and then set up the +macro definitions the way you need them. You must then add -DHAVE_CONFIG_H to +all of your compile commands, so that config.h is included at the start of +every source. + +Alternatively, you can avoid editing by using -D on the compiler command line +to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H. + +PCRE uses memmove() if HAVE_MEMMOVE is set to 1; otherwise it uses bcopy() if +HAVE_BCOPY is set to 1. If your system has neither bcopy() nor memmove(), set +them both to 0; an emulation function will be used. */ + +/* By default, the \R escape sequence matches any Unicode line ending + character or sequence of characters. If BSR_ANYCRLF is defined, this is + changed so that backslash-R matches only CR, LF, or CRLF. The build- time + default can be overridden by the user of PCRE at runtime. On systems that + support it, "configure" can be used to override the default. */ +#undef BSR_ANYCRLF + +/* If you are compiling for a system that uses EBCDIC instead of ASCII + character codes, define this macro as 1. On systems that can use + "configure", this can be done via --enable-ebcdic. PCRE will then assume + that all input strings are in EBCDIC. If you do not define this macro, PCRE + will assume input strings are ASCII or UTF-8/16 Unicode. It is not possible + to build a version of PCRE that supports both EBCDIC and UTF-8/16. */ +#undef EBCDIC + +/* Define to 1 if you have the `bcopy' function. */ +#undef HAVE_BCOPY + +/* Define to 1 if you have the <bits/type_traits.h> header file. */ +#undef HAVE_BITS_TYPE_TRAITS_H + +/* Define to 1 if you have the <bzlib.h> header file. */ +#undef HAVE_BZLIB_H + +/* Define to 1 if you have the <dirent.h> header file. */ +#undef HAVE_DIRENT_H + +/* Define to 1 if you have the <dlfcn.h> header file. */ +#undef HAVE_DLFCN_H + +/* Define to 1 if you have the <editline/readline.h> header file. */ +#undef HAVE_EDITLINE_READLINE_H + +/* Define to 1 if you have the <edit/readline/readline.h> header file. */ +#undef HAVE_EDIT_READLINE_READLINE_H + +/* Define to 1 if you have the <inttypes.h> header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the <limits.h> header file. */ +#undef HAVE_LIMITS_H + +/* Define to 1 if the system has the type `long long'. */ +#undef HAVE_LONG_LONG + +/* Define to 1 if you have the `memmove' function. */ +#undef HAVE_MEMMOVE + +/* Define to 1 if you have the <memory.h> header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the <readline/history.h> header file. */ +#undef HAVE_READLINE_HISTORY_H + +/* Define to 1 if you have the <readline/readline.h> header file. */ +#undef HAVE_READLINE_READLINE_H + +/* Define to 1 if you have the <stdint.h> header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the <stdlib.h> header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the `strerror' function. */ +#undef HAVE_STRERROR + +/* Define to 1 if you have the <string> header file. */ +#undef HAVE_STRING + +/* Define to 1 if you have the <strings.h> header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the <string.h> header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have `strtoimax'. */ +#undef HAVE_STRTOIMAX + +/* Define to 1 if you have `strtoll'. */ +#undef HAVE_STRTOLL + +/* Define to 1 if you have `strtoq'. */ +#undef HAVE_STRTOQ + +/* Define to 1 if you have the <sys/stat.h> header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the <sys/types.h> header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the <type_traits.h> header file. */ +#undef HAVE_TYPE_TRAITS_H + +/* Define to 1 if you have the <unistd.h> header file. */ +#undef HAVE_UNISTD_H + +/* Define to 1 if the system has the type `unsigned long long'. */ +#undef HAVE_UNSIGNED_LONG_LONG + +/* Define to 1 if you have the <windows.h> header file. */ +#undef HAVE_WINDOWS_H + +/* Define to 1 if you have the <zlib.h> header file. */ +#undef HAVE_ZLIB_H + +/* Define to 1 if you have `_strtoi64'. */ +#undef HAVE__STRTOI64 + +/* The value of LINK_SIZE determines the number of bytes used to store links + as offsets within the compiled regex. The default is 2, which allows for + compiled patterns up to 64K long. This covers the vast majority of cases. + However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows + for longer patterns in extreme cases. On systems that support it, + "configure" can be used to override this default. */ +#undef LINK_SIZE + +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#undef LT_OBJDIR + +/* The value of MATCH_LIMIT determines the default number of times the + internal match() function can be called during a single execution of + pcre_exec(). There is a runtime interface for setting a different limit. + The limit exists in order to catch runaway regular expressions that take + for ever to determine that they do not match. The default is set very large + so that it does not accidentally catch legitimate cases. On systems that + support it, "configure" can be used to override this default default. */ +#undef MATCH_LIMIT + +/* The above limit applies to all calls of match(), whether or not they + increase the recursion depth. In some environments it is desirable to limit + the depth of recursive calls of match() more strictly, in order to restrict + the maximum amount of stack (or heap, if NO_RECURSE is defined) that is + used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of + match(). To have any useful effect, it must be less than the value of + MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is + a runtime method for setting a different limit. On systems that support it, + "configure" can be used to override the default. */ +#undef MATCH_LIMIT_RECURSION + +/* This limit is parameterized just in case anybody ever wants to change it. + Care must be taken if it is increased, because it guards against integer + overflow caused by enormously large patterns. */ +#undef MAX_NAME_COUNT + +/* This limit is parameterized just in case anybody ever wants to change it. + Care must be taken if it is increased, because it guards against integer + overflow caused by enormously large patterns. */ +#undef MAX_NAME_SIZE + +/* The value of NEWLINE determines the newline character sequence. On systems + that support it, "configure" can be used to override the default, which is + 10. The possible values are 10 (LF), 13 (CR), 3338 (CRLF), -1 (ANY), or -2 + (ANYCRLF). */ +#undef NEWLINE + +/* PCRE uses recursive function calls to handle backtracking while matching. + This can sometimes be a problem on systems that have stacks of limited + size. Define NO_RECURSE to get a version that doesn't use recursion in the + match() function; instead it creates its own stack by steam using + pcre_recurse_malloc() to obtain memory from the heap. For more detail, see + the comments and other stuff just above the match() function. On systems + that support it, "configure" can be used to set this in the Makefile (use + --disable-stack-for-recursion). */ +#undef NO_RECURSE + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* The value of PCREGREP_BUFSIZE determines the size of buffer used by + pcregrep to hold parts of the file it is searching. On systems that support + it, "configure" can be used to override the default, which is 8192. This is + also the minimum value. The actual amount of memory used by pcregrep is + three times this number, because it allows for the buffering of "before" + and "after" lines. */ +#undef PCREGREP_BUFSIZE + + +/* If you are compiling for a system other than a Unix-like system or + Win32, and it needs some magic to be inserted before the definition + of a function that is exported by the library, define this macro to + contain the relevant magic. If you do not define this macro, it + defaults to "extern" for a C compiler and "extern C" for a C++ + compiler on non-Win32 systems. This macro apears at the start of + every exported function that is part of the external API. It does + not appear on functions that are "external" in the C sense, but + which are internal to the library. */ +#undef PCRE_EXP_DEFN + +/* Define if linking statically (TODO: make nice with Libtool) */ +#undef PCRE_STATIC + +/* When calling PCRE via the POSIX interface, additional working storage is + required for holding the pointers to capturing substrings because PCRE + requires three integers per substring, whereas the POSIX interface provides + only two. If the number of expected substrings is small, the wrapper + function uses space on the stack, because this is faster than using + malloc() for each call. The threshold above which the stack is no longer + used is defined by POSIX_MALLOC_THRESHOLD. On systems that support it, + "configure" can be used to override this default. */ +#undef POSIX_MALLOC_THRESHOLD + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define to enable support for Just-In-Time compiling. */ +#undef SUPPORT_JIT + +/* Define to allow pcregrep to be linked with libbz2, so that it is able to + handle .bz2 files. */ +#undef SUPPORT_LIBBZ2 + +/* Define to allow pcretest to be linked with libedit. */ +#undef SUPPORT_LIBEDIT + +/* Define to allow pcretest to be linked with libreadline. */ +#undef SUPPORT_LIBREADLINE + +/* Define to allow pcregrep to be linked with libz, so that it is able to + handle .gz files. */ +#undef SUPPORT_LIBZ + +/* Define to enable the 16 bit PCRE library. */ +#undef SUPPORT_PCRE16 + +/* Define to enable the 8 bit PCRE library. */ +#undef SUPPORT_PCRE8 + +/* Define to enable JIT support in pcregrep. */ +#undef SUPPORT_PCREGREP_JIT + +/* Define to enable support for Unicode properties. */ +#undef SUPPORT_UCP + +/* Define to enable support for the UTF-8/16 Unicode encoding. This will work + even in an EBCDIC environment, but it is incompatible with the EBCDIC + macro. That is, PCRE can support *either* EBCDIC code *or* ASCII/UTF-8/16, + but not both at once. */ +#undef SUPPORT_UTF + +/* Version number of package */ +#undef VERSION + +/* Define to empty if `const' does not conform to ANSI C. */ +#undef const + +/* Define to the type of a signed integer type of width exactly 64 bits if + such a type exists and the standard includes do not define it. */ +#undef int64_t + +/* Define to `unsigned int' if <sys/types.h> does not define. */ +#undef size_t |