Remove old in-source documentation and files

This building and installing documentation is related to PySide1,
and besides being deprecated, it was replaced by the information
in our wiki and official docs.

Also the appveyor.xml file was removed since it's out of date.

Change-Id: I3d54e679db01057687dbd0cdf742decddcf86b1d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>

14 files changed, 0 insertions, 1561 deletions

diff --git a/docs/Makefile b/docs/Makefile
deleted file mode 100644
index 9077fad20..000000000
--- a/docs/Makefile
+++ /dev/null
@@ -1,177 +0,0 @@
-# Makefile for Sphinx documentation
-#
-
-# You can set these variables from the command line.
-SPHINXOPTS    =
-SPHINXBUILD   = sphinx-build
-PAPER         =
-BUILDDIR      = _build
-
-# User-friendly check for sphinx-build
-ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
-$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
-endif
-
-# Internal variables.
-PAPEROPT_a4     = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-
-.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
-
-help:
-	@echo "Please use \`make <target>' where <target> is one of"
-	@echo "  html       to make standalone HTML files"
-	@echo "  dirhtml    to make HTML files named index.html in directories"
-	@echo "  singlehtml to make a single large HTML file"
-	@echo "  pickle     to make pickle files"
-	@echo "  json       to make JSON files"
-	@echo "  htmlhelp   to make HTML files and a HTML help project"
-	@echo "  qthelp     to make HTML files and a qthelp project"
-	@echo "  devhelp    to make HTML files and a Devhelp project"
-	@echo "  epub       to make an epub"
-	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
-	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
-	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
-	@echo "  text       to make text files"
-	@echo "  man        to make manual pages"
-	@echo "  texinfo    to make Texinfo files"
-	@echo "  info       to make Texinfo files and run them through makeinfo"
-	@echo "  gettext    to make PO message catalogs"
-	@echo "  changes    to make an overview of all changed/added/deprecated items"
-	@echo "  xml        to make Docutils-native XML files"
-	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
-	@echo "  linkcheck  to check all external links for integrity"
-	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
-
-clean:
-	rm -rf $(BUILDDIR)/*
-
-html:
-	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-
-dirhtml:
-	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-
-singlehtml:
-	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
-	@echo
-	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-
-pickle:
-	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
-	@echo
-	@echo "Build finished; now you can process the pickle files."
-
-json:
-	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
-	@echo
-	@echo "Build finished; now you can process the JSON files."
-
-htmlhelp:
-	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
-	@echo
-	@echo "Build finished; now you can run HTML Help Workshop with the" \
-	      ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-qthelp:
-	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
-	@echo
-	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
-	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
-	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/PySide.qhcp"
-	@echo "To view the help file:"
-	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/PySide.qhc"
-
-devhelp:
-	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
-	@echo
-	@echo "Build finished."
-	@echo "To view the help file:"
-	@echo "# mkdir -p $$HOME/.local/share/devhelp/PySide"
-	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/PySide"
-	@echo "# devhelp"
-
-epub:
-	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
-	@echo
-	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-latex:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo
-	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
-	@echo "Run \`make' in that directory to run these through (pdf)latex" \
-	      "(use \`make latexpdf' here to do that automatically)."
-
-latexpdf:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through pdflatex..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-latexpdfja:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through platex and dvipdfmx..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-text:
-	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
-	@echo
-	@echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-man:
-	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
-	@echo
-	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-texinfo:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo
-	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
-	@echo "Run \`make' in that directory to run these through makeinfo" \
-	      "(use \`make info' here to do that automatically)."
-
-info:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo "Running Texinfo files through makeinfo..."
-	make -C $(BUILDDIR)/texinfo info
-	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-gettext:
-	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
-	@echo
-	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-changes:
-	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
-	@echo
-	@echo "The overview file is in $(BUILDDIR)/changes."
-
-linkcheck:
-	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
-	@echo
-	@echo "Link check complete; look for any errors in the above output " \
-	      "or in $(BUILDDIR)/linkcheck/output.txt."
-
-doctest:
-	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
-	@echo "Testing of doctests in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/doctest/output.txt."
-
-xml:
-	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
-	@echo
-	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
-
-pseudoxml:
-	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
-	@echo
-	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
diff --git a/docs/building/index.rst b/docs/building/index.rst
deleted file mode 100644
index daf78b998..000000000
--- a/docs/building/index.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-Building PySide
-===============
-
-.. toctree::
-   :maxdepth: 2
-
-   windows.rst
-   macosx.rst
-   linux.rst
-   options.rst
diff --git a/docs/building/linux.rst b/docs/building/linux.rst
deleted file mode 100644
index 84166c244..000000000
--- a/docs/building/linux.rst
+++ /dev/null
@@ -1,138 +0,0 @@
-.. _building_linux:
-
-Building PySide on a Linux System (Ubuntu 12.04 - 14.04)
-========================================================
-
-Installing prerequisites
-------------------------
-
-#. Install build dependencies:
-
-   ::
-
-      $ sudo apt-get install build-essential git cmake libqt4-dev libphonon-dev python2.7-dev libxml2-dev libxslt1-dev qtmobility-dev
-
-#. Install latest ``pip`` distribution into the Python you
-   installed in the first step: download `get-pip.py 
-   <https://bootstrap.pypa.io/get-pip.py>`_ and run it using
-   the ``python`` interpreter of your Python 2.7 installation using a
-   command prompt:
-
-   ::
-
-      $ wget https://bootstrap.pypa.io/get-pip.py
-      $ sudo python2.7 get-pip.py
-
-#. Install latest ``wheel`` distribution:
-
-   ::
-
-      $ sudo pip2.7 install wheel
-
-
-Building PySide distribution
-----------------------------
-
-#. Download ``PySide`` source distribution:
-
-   ::
-
-      $ wget https://pypi.python.org/packages/source/P/PySide/PySide-1.2.2.tar.gz
-
-#. Extract the source distribution:
-
-   ::
-
-      $ tar -xvzf PySide-1.2.2.tar.gz
-
-#. Switch to the distribution directory:
-
-   ::
-
-      $ cd PySide-1.2.2
-
-#. Build the ``wheel`` binary distribution:
-
-   ::
-
-      $ python2.7 setup.py bdist_wheel --qmake=/usr/bin/qmake-qt4
-
-#. Optionally you can build standalone version of distribution with embedded Qt libs:
-
-   ::
-
-      $ python2.7 setup.py bdist_wheel --qmake=/usr/bin/qmake-qt4 --standalone
-
-
-Building PySide distribution from a Git repository
---------------------------------------------------
-
-#. Clone ``PySide`` setup scripts from git repository:
-
-   ::
-
-      $ git clone https://github.com/PySide/pyside-setup.git pyside-setup
-
-#. Switch to the ``pyside-setup`` directory:
-
-   ::
-
-      $ cd pyside-setup
-
-#. Build ``PySide`` distribution:
-
-   ::
-
-      $ python2.7 setup.py bdist_wheel --qmake=/usr/bin/qmake-qt4 --version=1.2.2
-
-#. Optionally you can build standalone version of distribution with embedded Qt libs:
-
-   ::
-
-      $ python2.7 setup.py bdist_wheel --qmake=/usr/bin/qmake-qt4 --version=1.2.2 --standalone
-
-#. To build the development version of ``PySide`` distribution, ignore the --version parameter:
-
-   ::
-
-      $ python2.7 setup.py bdist_wheel --qmake=/usr/bin/qmake-qt4
-
-
-Installing PySide distribution
-------------------------------
-
-#. After the successful build, install the distribution with ``pip``. The file name may vary depending on your platform so look into the ``dist`` directory for the correct name:
-
-   ::
-
-      $ ls dist
-      PySide-1.2.2-cp27-none-linux-x86_64.whl
-      $ sudo pip2.7 install dist/PySide-1.2.2-cp27-none-linux-x86_64.whl
-
-
-Installing PySide distribution into ``virtual`` Python environment
-------------------------------------------------------------------
-
-#. Install latest ``virtualenv`` distribution:
-
-   ::
-
-      $ sudo pip2.7 virtualenv
-
-#. Use ``virtualenv`` to make a workspace:
-
-   ::
-
-      $ virtualenv-2.7 env
-
-#. Switch to the ``env`` directory:
-
-   ::
-
-      $ cd env
-
-#. Install the distribution with ``pip`` (wheel binary file name may vary by platform):
-
-   ::
-
-      $ bin/pip2.7 install ../dist/PySide-1.2.2-cp27-none-linux-x86_64.whl
diff --git a/docs/building/macosx.rst b/docs/building/macosx.rst
deleted file mode 100644
index 807b47b32..000000000
--- a/docs/building/macosx.rst
+++ /dev/null
@@ -1,263 +0,0 @@
-.. _building_macosx:
-
-Building PySide on a Mac OS X System
-====================================
-
-Mac OS X is a Unix flavor, partially based upon 
-`BSD Unix <http://en.wikipedia.org/wiki/Berkeley_Software_Distribution>`_.
-
-The supported Mac OS X versions created by `Apple <http://www.apple.com/>`_ are
-
-- OS X 10.6 *Snow Leopard*
-- OS X 10.7 *Lion*
-- OS X 10.8 *Mountain Lion*
-- OS X 10.9 *Mavericks*
-- OS X 10.10 *Yosemite*
-
-Mac OS X is a proprietary UNIX flavor of BSD Unix and only partially similar to
-Linux. Therefore, the usual packages from Linux distributions cannot be used
-without modifications.
-
-There are several known package managers which provide support for Mac OS X, namely
-
-- `MacPorts <http://www.macports.org/>`_
-- `Fink <http://www.finkproject.org/>`_
-- `Homebrew <http://brew.sh/>`_
-
-The main purpose of all of these projects is to provide the missing Linux packages
-for Mac OS X.
-
-Throughout this tutorial, we are only using `Homebrew <http://brew.sh/>`_, because
-it appears to be the most light-weight package manager available. All installations
-are made to /usr/local/(bin|lib|include|shared) by simple symlinks.
-
-But it should be easy to translate these instructions for the other, heavier package managers.
-
-
-Installing prerequisites
-------------------------
-
-#. Install Package Manager:
-
-   ::
-
-      $ ruby -e "$(curl -fsSL https://raw.github.com/Homebrew/homebrew/go/install)"
-
-   Follow the on-screen instructions to make adjustions, especially run
-
-   ::
-
-      $ brew doctor
-
-   Also see the `homebrew homepage <http://brew.sh/>`_ for further information
-
-#. Install `Xcode <https://itunes.apple.com/en/app/xcode/id497799835?mt=12>`_ (optional):
-
-   Follow the on-screen instructions. If you selected any extensions to be installed,
-   wait for their completion before you proceed.
-
-   .. note::
-
-      If you are using Mavericks, you can also use the Xcode Command Line Tools without actually installing Xcode
-      (not tested, see this article: `How to Install Command Line Tools in OS X Mavericks (Without Xcode)
-      <http://osxdaily.com/2014/02/12/install-command-line-tools-mac-os-x/>`_).
-
-#. Install the Xcode command Line Tools:
-
-   After Xcode installation has finished, you can open a command shell and issue
-
-   ::
-
-      $ xcode-select --install
-
-   This will open a dialog window with further instructions.
-   After the command line tools are installed, you will not need to use Xcode again
-   in order to set up PySide.
-
-#. Install build dependencies:
-
-   ::
-
-      $ brew install python cmake qt
-
-   Remark: This installs ``Homebrew`` Python, which is fine for you as a single user.
-   If you are considering to build installers for external users, see the section
-   ``About PySide Distributions``.
-
-#. Install latest ``pip`` distribution into the Python you
-   installed in the first step: download `get-pip.py 
-   <https://bootstrap.pypa.io/get-pip.py>`_ and run it using
-   the ``python`` interpreter of your Python 2.7 installation using a
-   command prompt:
-
-   ::
-
-      $ wget https://bootstrap.pypa.io/get-pip.py
-      $ sudo python2.7 get-pip.py
-
-   .. note::
-
-      There are situations with older Python versions, where the above procedure does not work.
-      You can then use this last-resort work-around (tested)::
-
-         $ wget https://bitbucket.org/pypa/setuptools/raw/bootstrap/ez_setup.py
-         $ sudo python2.7 ez_setup.py
-         $ sudo easy_install pip
-         $ sudo pip install setuptools -U
-         $ sudo pip install wheel -U
-
-#. Install latest ``wheel`` distribution:
-
-   ::
-
-      $ sudo pip2.7 install wheel
-
-
-About PySide Distribution
--------------------------
-
-If you want to build PySide for your own use, the above instructions are ok.
-
-But when you are considering to build PySide for other versions or other users, you need
-to be aware of the following caveat:
-
-- Mac OS X has the concept of a ``MACOSX_DEPLOYMENT_TARGET``
-
-- The current deployment targets which work with PySide are 10.6 to 10.9 .
-
-- All binary installers from https://www.python.org are built with the setting
-
-::
-
-   $ export MACOSX_DEPLOYMENT_TARGET=10.6  # Snow Leopard
-
-- The default setting for the deployment target of an extension (like PySide)
-  is always inherited from the Python used for building.
-  You can set the deployment target higher than that, but not below the
-  OS X version that was set during building your Python installation.
-  
-- Current distributions like Homebrew set the deployment target to the same
-  value as the OS version they are built with. (I.E. 10.9 for Mavericks).
-  
-- Example: A PySide, built on Mavericks, will therefore not run on a Python that was built
-  for Mountain Lion.
-
-Recommendation:
-
-- Use Homebrew's simplicity for your own machine. Do not use it for distributing.
-
-- Use one of the `Python.org Distributions <https://www.python.org/downloads/>`_
-  or 
-  
-- Build your own Python, either from a tar archive (
-  `Python 2.7 <https://www.python.org/ftp/python/2.7.6/Python-2.7.6.tgz>`_ or
-  `Python 3.4 <https://www.python.org/ftp/python/3.4.0/Python-3.4.0.tgz>`_), or from a
-  `Mercurial repository <https://docs.python.org/devguide/>`_ with an explicit setting of
-  ``MACOSX_DEPLOYMENT_TARGET``.
-
-Building PySide distribution
-----------------------------
-
-#. Download ``PySide`` source distribution:
-
-   ::
-
-      $ wget https://pypi.python.org/packages/source/P/PySide/PySide-1.2.2.tar.gz
-
-#. Extract the source distribution:
-
-   ::
-
-      $ tar -xvzf PySide-1.2.2.tar.gz
-
-#. Switch to the distribution directory:
-
-   ::
-
-      $ cd PySide-1.2.2
-
-#. Build the ``wheel`` binary distribution:
-
-   ::
-
-      $ python2.7 setup.py bdist_wheel
-
-
-Building PySide distribution from a Git repository
---------------------------------------------------
-
-#. Clone ``PySide`` setup scripts from git repository:
-
-   ::
-
-      $ git clone https://github.com/PySide/pyside-setup.git pyside-setup
-
-#. Switch to the ``pyside-setup`` directory:
-
-   ::
-
-      $ cd pyside-setup
-
-#. Build ``PySide`` distribution:
-
-   ::
-
-      $ python2.7 setup.py bdist_wheel --version=1.2.2
-
-   ..  commented out, working on this
-        #. Optionally you can build standalone version of distribution with embedded Qt libs:
-        
-           ::
-        
-              $ python2.7 setup.py bdist_wheel --version=1.2.2 --standalone
-
-#. To build the development version of ``PySide`` distribution, ignore the --version parameter:
-
-   ::
-
-      $ python2.7 setup.py bdist_wheel
-
-
-Installing PySide distribution
-------------------------------
-
-#. After the successful build, install the distribution with ``pip``:
-
-   ::
-
-      $ sudo pip2.7 install dist/PySide-1.2.2-cp27-none-linux-x86_64.whl
-
-
-Installing PySide distribution into ``virtual`` Python environment
-------------------------------------------------------------------
-
-#. Install latest ``virtualenv`` distribution:
-
-   ::
-
-      $ sudo pip2.7 virtualenv
-
-#. Use ``virtualenv`` to make a workspace:
-
-   ::
-
-      $ virtualenv-2.7 env
-
-#. Activate the virtual Python in the ``env`` directory:
-
-   ::
-
-      $ source env/bin/activate
-
-#. Install the distribution with ``pip``:
-
-   ::
-
-      (env) $ pip install ../dist/PySide-1.2.2-cp27-none-linux-x86_64.whl
-
-#. Leave the virtual environment (optional):
-
-   ::
-
-      (env) $ deactivate
-      $ 
diff --git a/docs/building/options.rst b/docs/building/options.rst
deleted file mode 100644
index 63489f80a..000000000
--- a/docs/building/options.rst
+++ /dev/null
@@ -1,99 +0,0 @@
-.. _building_options:
-
-PySide Setup Script command line options
-========================================
-
-Usage on a Windows System
--------------------------
-
-::
-
-   c:\> c:\Python27\python.exe setup.py [distribution_type] [options]
-
-Usage on a Linux/Mac OS X System
---------------------------------
-
-::
-
-   python2.7 setup.py [distribution_type] [options]
-
-
-Distribution types
-------------------
-
-``bdist_wheel``
-    Create a wheel binary distribution.
-    This distribution type can be installed with ``pip``.
-
-``bdist_egg``
-    Create an egg binary distribution.
-    This distribution type can be installed with ``easy_install``.
-
-``bdist_wininst``
-    Create a standalone windows installer with embedded Qt libs and development tools.
-    This distribution type can be installed with ``easy_install``.
-
-``install``
-    Install package to site packages folder.
-
-``develop``
-    Install package in ``development mode``, such that it's available on
-    ``sys.path``, yet can still be edited directly from its source folder.
-
-``sdist``
-    Create a full source distribution with included sources of PySide Setup Scripts,
-    PySide, Shiboken, PySide Tools and PySide Examples.
-    Can be used to build binary distribution in offline mode.
-
-Options
--------
-
-``--qmake``
-    Specify the path to qmake.
-    Useful when the qmake is not in path or more than one Qt versions are installed.
-
-``--openssl``
-    Specify the path to OpenSSL libs.
-
-``--only-package``
-    Skip rebuilding everything and create distribution from prebuilt binaries.
-    Before using this option first time, the full distribution build is required.
-
-``--cmake``
-    Specify the path to cmake.
-    Useful when the cmake is not in path.
-
-``--standalone``
-    When enabled, all required Qt libs will be included in PySide distribution.
-    This option is allways enabled on Windows.
-    On Linux it's disabled by default.
-
-    .. note::
-
-      This option does not work on Mac OS X, yet.
-
-``--version``
-    Specify what version of PySide distribution to build.
-    This option is available only when the setup scripts are cloned from git repository.
-
-``--list-versions``
-    List available versions of PySide distributions.
-
-``--ignore-git``
-    Don't pull sources from git repository.
-
-``--make-spec``
-    Specify the cmake makefile generator type.
-    Available values are ``msvc`` on Windows and ``make`` on Linux/Mac OS X.
-
-``--no-examples``
-    Don't include PySide examples in PySide distribution
-
-``--parallel``
-    Specify the number of parallel build jobs
-
-``--jom``
-    Use `jom <http://qt-project.org/wiki/jom>`_ instead of nmake with msvc
-
-``--build-tests``
-    Enable building the tests
diff --git a/docs/building/windows.rst b/docs/building/windows.rst
deleted file mode 100644
index 72266c9f7..000000000
--- a/docs/building/windows.rst
+++ /dev/null
@@ -1,136 +0,0 @@
-.. _building_windows:
-
-Building PySide on a Windows System
-===================================
-
-Installing prerequisites
-------------------------
-
-#. Install `Python
-   <http://www.python.org/download/>`_.
-
-#. Install `Qt 4.8 libraries for Windows VS 2008 edition
-   <http://download.qt-project.org/official_releases/qt/4.8/4.8.6/qt-opensource-windows-x86-vs2008-4.8.6.exe>`_
-   when building against Python 2.6, 2.7 or 3.2.
-
-   Install `Qt 4.8 libraries for Windows VS 2010 edition
-   <http://download.qt-project.org/official_releases/qt/4.8/4.8.6/qt-opensource-windows-x86-vs2010-4.8.6.exe>`_
-   when building against Python 3.3 or 3.4.
-
-#. Install `Cmake
-   <http://www.cmake.org/cmake/resources/software.html>`_.
-
-#. Install `Windows SDK v7.0
-   <http://www.microsoft.com/en-us/download/details.aspx?id=3138>`_
-   when building against Python 2.6, 2.7 or 3.2.
-
-   Install `Windows SDK v7.1
-   <http://www.microsoft.com/en-us/download/details.aspx?id=8279>`_
-   when building against Python 3.3 or 3.4.
-
-#. Install `Git
-   <http://git-scm.com/download/win>`_.
-
-#. (Optional) Install `OpenSSL
-   <http://slproweb.com/products/Win32OpenSSL.html>`_.
-
-#. Install latest ``pip`` distribution into the Python you
-   installed in the first step: download `get-pip.py 
-   <https://bootstrap.pypa.io/get-pip.py>`_ and run it using
-   the ``python`` interpreter of your Python 2.7 installation using a
-   command prompt:
-
-   ::
-
-      c:\> c:\Python27\python get-pip.py
-
-#. Install latest `wheel` distribution:
-
-   ::
-
-      c:\> c:\Python27\Scripts\pip install wheel
-
-
-Building PySide distribution
-----------------------------
-
-#. Download and extract `PySide source distribution
-   <https://pypi.python.org/packages/source/P/PySide/PySide-1.2.2.tar.gz>`_
-
-#. Switch to the distribution directory:
-
-   ::
-
-      c:\> cd PySide-1.2.2
-
-#. Build the ``wheel`` binary distribution:
-
-   ::
-
-      c:\> c:\Python27\python.exe setup.py bdist_wheel --qmake=c:\Qt\4.8.5\bin\qmake.exe --openssl=c:\OpenSSL32bit\bin
-
-
-Building PySide distribution from a Git repository
---------------------------------------------------
-
-#. Clone ``PySide`` setup scripts from git repository:
-
-   ::
-
-      c:\> git clone https://github.com/PySide/pyside-setup.git pyside-setup
-
-#. Switch to the ``pyside-setup`` directory:
-
-   ::
-
-      c:\> cd pyside-setup
-
-#. Build the `wheel` binary distribution:
-
-   ::
-
-      c:\> c:\Python27\python.exe setup.py bdist_wheel --version=1.2.2 --qmake=c:\Qt\4.8.5\bin\qmake.exe --openssl=c:\OpenSSL32bit\bin
-
-#. To build the development version of ``PySide`` distribution, ignore the --version parameter:
-
-   ::
-
-      c:\> c:\Python27\python.exe setup.py bdist_wheel --qmake=c:\Qt\4.8.5\bin\qmake.exe --openssl=c:\OpenSSL32bit\bin
-
-
-Installing PySide distribution
-------------------------------
-
-#. After the successful build, install the distribution with ``pip``:
-
-   ::
-
-      c:\> c:\Python27\Scripts\pip install dist\PySide-1.2.2-cp27-none-win32.whl
-
-
-Installing PySide distribution into ``virtual`` Python environment
-------------------------------------------------------------------
-
-#. Install latest ``virtualenv`` distribution:
-
-   ::
-
-      c:\> c:\Python27\Scripts\pip install virtualenv
-
-#. Use ``virtualenv`` to make a workspace:
-
-   ::
-
-      c:\> c:\Python27\Scripts\virtualenv env
-
-#. Switch to the ``env`` directory:
-
-   ::
-
-      c:\> cd env
-
-#. Install the distribution with ``pip``:
-
-   ::
-
-      c:\> Scripts\pip install ..\dist\PySide-1.2.2-cp27-none-win32.whl
diff --git a/docs/changes.rst b/docs/changes.rst
deleted file mode 100644
index 41031dd96..000000000
--- a/docs/changes.rst
+++ /dev/null
@@ -1,4 +0,0 @@
-.. toctree::
-   :maxdepth: 2
-
-.. include:: ../CHANGES.rst
diff --git a/docs/conf.py b/docs/conf.py
deleted file mode 100644
index 7f8bfb2eb..000000000
--- a/docs/conf.py
+++ /dev/null
@@ -1,301 +0,0 @@
-# -*- coding: utf-8 -*-
-#############################################################################
-##
-## Copyright (C) 2017 The Qt Company Ltd.
-## Contact: https://www.qt.io/licensing/
-##
-## This file is part of Qt for Python.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see https://www.qt.io/terms-conditions. For further
-## information use the contact form at https://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 3 as published by the Free Software
-## Foundation and appearing in the file LICENSE.LGPL3 included in the
-## packaging of this file. Please review the following information to
-## ensure the GNU Lesser General Public License version 3 requirements
-## will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU
-## General Public License version 2.0 or (at your option) the GNU General
-## Public license version 3 or any later version approved by the KDE Free
-## Qt Foundation. The licenses are as published by the Free Software
-## Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
-## included in the packaging of this file. Please review the following
-## information to ensure the GNU General Public License requirements will
-## be met: https://www.gnu.org/licenses/gpl-2.0.html and
-## https://www.gnu.org/licenses/gpl-3.0.html.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-#
-# PySide documentation build configuration file, created by
-# sphinx-quickstart on Mon May 12 22:14:54 2014.
-#
-# This file is execfile()d with the current directory set to its
-# containing dir.
-#
-# Note that not all possible configuration values are present in this
-# autogenerated file.
-#
-# All configuration values have a default; values that are commented out
-# serve to show the default.
-
-import sys
-import os
-
-# If extensions (or modules to document with autodoc) are in another directory,
-# add these directories to sys.path here. If the directory is relative to the
-# documentation root, use os.path.abspath to make it absolute, like shown here.
-#sys.path.insert(0, os.path.abspath('.'))
-
-# -- General configuration ------------------------------------------------
-
-# If your documentation needs a minimal Sphinx version, state it here.
-#needs_sphinx = '1.0'
-
-# Add any Sphinx extension module names here, as strings. They can be
-# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
-# ones.
-extensions = []
-
-# Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
-
-# The suffix of source filenames.
-source_suffix = '.rst'
-
-# The encoding of source files.
-#source_encoding = 'utf-8-sig'
-
-# The master toctree document.
-master_doc = 'index'
-
-# General information about the project.
-project = u'PySide'
-copyright = u'2014, PySide Team'
-
-# The version info for the project you're documenting, acts as replacement for
-# |version| and |release|, also used in various other places throughout the
-# built documents.
-#
-# The short X.Y version.
-version = '1.2.2'
-# The full version, including alpha/beta/rc tags.
-release = '1.2.2'
-
-# The language for content autogenerated by Sphinx. Refer to documentation
-# for a list of supported languages.
-#language = None
-
-# There are two options for replacing |today|: either, you set today to some
-# non-false value, then it is used:
-#today = ''
-# Else, today_fmt is used as the format for a strftime call.
-#today_fmt = '%B %d, %Y'
-
-# List of patterns, relative to source directory, that match files and
-# directories to ignore when looking for source files.
-exclude_patterns = ['_build']
-
-# The reST default role (used for this markup: `text`) to use for all
-# documents.
-#default_role = None
-
-# If true, '()' will be appended to :func: etc. cross-reference text.
-#add_function_parentheses = True
-
-# If true, the current module name will be prepended to all description
-# unit titles (such as .. function::).
-#add_module_names = True
-
-# If true, sectionauthor and moduleauthor directives will be shown in the
-# output. They are ignored by default.
-#show_authors = False
-
-# The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
-
-# A list of ignored prefixes for module index sorting.
-#modindex_common_prefix = []
-
-# If true, keep warnings as "system message" paragraphs in the built documents.
-#keep_warnings = False
-
-
-# -- Options for HTML output ----------------------------------------------
-
-# The theme to use for HTML and HTML Help pages.  See the documentation for
-# a list of builtin themes.
-html_theme = 'default'
-
-# Theme options are theme-specific and customize the look and feel of a theme
-# further.  For a list of options available for each theme, see the
-# documentation.
-#html_theme_options = {}
-
-# Add any paths that contain custom themes here, relative to this directory.
-#html_theme_path = []
-
-# on_rtd is whether we are on readthedocs.org
-on_rtd = os.environ.get('READTHEDOCS', None) == 'True'
-
-if not on_rtd:
-    # only import and set the theme if we're building docs locally
-    import sphinx_rtd_theme
-    html_theme = 'sphinx_rtd_theme'
-    html_theme_path = [sphinx_rtd_theme.get_html_theme_path()]
-
-# The name for this set of Sphinx documents.  If None, it defaults to
-# "<project> v<release> documentation".
-#html_title = None
-
-# A shorter title for the navigation bar.  Default is the same as html_title.
-#html_short_title = None
-
-# The name of an image file (relative to this directory) to place at the top
-# of the sidebar.
-#html_logo = None
-
-# The name of an image file (within the static path) to use as favicon of the
-# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
-# pixels large.
-#html_favicon = None
-
-# Add any paths that contain custom static files (such as style sheets) here,
-# relative to this directory. They are copied after the builtin static files,
-# so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path = ['_static']
-
-# Add any extra paths that contain custom files (such as robots.txt or
-# .htaccess) here, relative to this directory. These files are copied
-# directly to the root of the documentation.
-#html_extra_path = []
-
-# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
-# using the given strftime format.
-#html_last_updated_fmt = '%b %d, %Y'
-
-# Custom sidebar templates, maps document names to template names.
-#html_sidebars = {}
-
-# Additional templates that should be rendered to pages, maps page names to
-# template names.
-#html_additional_pages = {}
-
-# If false, no module index is generated.
-#html_domain_indices = True
-
-# If false, no index is generated.
-#html_use_index = True
-
-# If true, the index is split into individual pages for each letter.
-#html_split_index = False
-
-# If true, links to the reST sources are added to the pages.
-#html_show_sourcelink = True
-
-# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-#html_show_sphinx = True
-
-# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-#html_show_copyright = True
-
-# If true, an OpenSearch description file will be output, and all pages will
-# contain a <link> tag referring to it.  The value of this option must be the
-# base URL from which the finished HTML is served.
-#html_use_opensearch = ''
-
-# This is the file name suffix for HTML files (e.g. ".xhtml").
-#html_file_suffix = None
-
-# Output file base name for HTML help builder.
-htmlhelp_basename = 'PySidedoc'
-
-
-# -- Options for LaTeX output ---------------------------------------------
-
-latex_elements = {
-# The paper size ('letterpaper' or 'a4paper').
-#'papersize': 'letterpaper',
-
-# The font size ('10pt', '11pt' or '12pt').
-#'pointsize': '10pt',
-
-# Additional stuff for the LaTeX preamble.
-#'preamble': '',
-}
-
-# Grouping the document tree into LaTeX files. List of tuples
-# (source start file, target name, title,
-#  author, documentclass [howto, manual, or own class]).
-latex_documents = [
-  ('index', 'PySide.tex', u'PySide Documentation',
-   u'PySide Team', 'manual'),
-]
-
-# The name of an image file (relative to this directory) to place at the top of
-# the title page.
-#latex_logo = None
-
-# For "manual" documents, if this is true, then toplevel headings are parts,
-# not chapters.
-#latex_use_parts = False
-
-# If true, show page references after internal links.
-#latex_show_pagerefs = False
-
-# If true, show URL addresses after external links.
-#latex_show_urls = False
-
-# Documents to append as an appendix to all manuals.
-#latex_appendices = []
-
-# If false, no module index is generated.
-#latex_domain_indices = True
-
-
-# -- Options for manual page output ---------------------------------------
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    ('index', 'pyside', u'PySide Documentation',
-     [u'PySide Team'], 1)
-]
-
-# If true, show URL addresses after external links.
-#man_show_urls = False
-
-
-# -- Options for Texinfo output -------------------------------------------
-
-# Grouping the document tree into Texinfo files. List of tuples
-# (source start file, target name, title, author,
-#  dir menu entry, description, category)
-texinfo_documents = [
-  ('index', 'PySide', u'PySide Documentation',
-   u'PySide Team', 'PySide', 'One line description of project.',
-   'Miscellaneous'),
-]
-
-# Documents to append as an appendix to all manuals.
-#texinfo_appendices = []
-
-# If false, no module index is generated.
-#texinfo_domain_indices = True
-
-# How to display URL addresses: 'footnote', 'no', or 'inline'.
-#texinfo_show_urls = 'footnote'
-
-# If true, do not generate a @detailmenu in the "Top" node's menu.
-#texinfo_no_detailmenu = False
diff --git a/docs/index.rst b/docs/index.rst
deleted file mode 100644
index b918c6038..000000000
--- a/docs/index.rst
+++ /dev/null
@@ -1,69 +0,0 @@
-======
-PySide
-======
-
-.. image:: https://pypip.in/wheel/PySide/badge.png
-   :target: https://pypi.python.org/pypi/PySide/
-   :alt: Wheel Status
-
-.. image:: https://pypip.in/download/PySide/badge.png
-   :target: https://pypi.python.org/pypi/PySide/
-   :alt: Downloads
-
-.. image:: https://pypip.in/version/PySide/badge.png
-   :target: https://pypi.python.org/pypi/PySide/
-   :alt: Latest Version
-
-.. image:: https://pypip.in/license/PySide/badge.png
-   :target: https://pypi.python.org/pypi/PySide/
-   :alt: License
-
-.. image:: https://readthedocs.org/projects/pip/badge/
-    :target: https://pyside.readthedocs.org
-
-|
-
-Introduction
-============
-
-PySide is the Python Qt bindings project, providing access the complete Qt 4.8 framework
-as well as to generator tools for rapidly generating bindings for any C++ libraries.
-
-The PySide project is developed in the open, with all facilities you'd expect
-from any modern OSS project such as all code in a git repository, an open
-Bugzilla for reporting bugs, and an open design process. We welcome
-any contribution without requiring a transfer of copyright.
-
-The PySide reference documentation is hosted at
-`http://pyside.github.io/docs/pyside/
-<http://pyside.github.io/docs/pyside/>`_.
-
-
-Compatibility
-=============
-
-PySide requires Python 2.6 or later and Qt 4.6 or better.
-
-.. note::
-
-   Qt 5.x is currently under construction.
-
-
-Contents
-========
-
-.. toctree::
-   :maxdepth: 2
-
-   installing/index.rst
-   building/index.rst
-   changes.rst
-
-
-Feedback and getting involved
-=============================
-
-- Mailing list: http://lists.qt-project.org/mailman/listinfo/pyside
-- Issue tracker: https://bugreports.qt-project.org/browse/PYSIDE
-- Code Repository: http://qt.gitorious.org/pyside
-- Examples Code Repository: https://github.com/PySide/Examples
diff --git a/docs/installing/index.rst b/docs/installing/index.rst
deleted file mode 100644
index ab4211fd1..000000000
--- a/docs/installing/index.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-Installing PySide
-=================
-
-.. toctree::
-   :maxdepth: 2
-
-   windows.rst
-   macosx.rst
-   linux.rst
diff --git a/docs/installing/linux.rst b/docs/installing/linux.rst
deleted file mode 100644
index 2fefd7c42..000000000
--- a/docs/installing/linux.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-.. _installing_linux:
-
-Installing PySide on a Linux System
-===================================
-
-We do not provide binaries for Linux. Please read
-the build instructions in section
-`Building PySide on a Linux System
-<http://pyside.readthedocs.org/en/latest/building/linux.html>`_.
diff --git a/docs/installing/macosx.rst b/docs/installing/macosx.rst
deleted file mode 100644
index 214d52f9b..000000000
--- a/docs/installing/macosx.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-.. _installing_macosx:
-
-Installing PySide on a Mac OS X System
-======================================
-
-Installing prerequisites
-------------------------
-
-Install latest ``pip`` distribution: download `get-pip.py
-<https://bootstrap.pypa.io/get-pip.py>`_ and run it using
-the ``python`` interpreter.
-
-You need to install or build Qt 4.8 first, see the `Qt Project Documentation
-<http://qt-project.org/doc/qt-4.8/install-mac.html>`_.
-
-Alternatively you can use `Homebrew <http://brew.sh/>`_ and install Qt with
-
-::
-
-   $ brew install qt
-
-Installing PySide
------------------
-
-To install PySide on Mac OS X you can choose from the following options:
-
-#. Use pip to install the ``wheel`` binary packages:
-
-   ::
-
-      $ pip install -U PySide
-
diff --git a/docs/installing/windows.rst b/docs/installing/windows.rst
deleted file mode 100644
index 899e2e356..000000000
--- a/docs/installing/windows.rst
+++ /dev/null
@@ -1,33 +0,0 @@
-.. _installing_windows:
-
-Installing PySide on a Windows System
-=====================================
-
-Installing prerequisites
-------------------------
-
-Install latest ``pip`` distribution: download `get-pip.py
-<https://bootstrap.pypa.io/get-pip.py>`_ and run it using
-the ``python`` interpreter.
-
-Installing PySide
------------------
-
-To install PySide on Windows you can choose from the following options:
-
-#. Use pip to install the ``wheel`` binary packages:
-
-   ::
-
-      pip install -U PySide
-
-#. Use setuptools to install the ``egg`` binary packages (deprecated):
-
-   ::
-
-      easy_install -U PySide
-
-.. note::
-
-   Provided binaries are without any other external dependencies.
-   All required Qt libraries, development tools and examples are included.
diff --git a/docs/make.bat b/docs/make.bat
deleted file mode 100644
index 4e169afe0..000000000
--- a/docs/make.bat
+++ /dev/null
@@ -1,281 +0,0 @@
-:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
-::
-:: Copyright (C) 2017 The Qt Company Ltd.
-:: Contact: https://www.qt.io/licensing/
-::
-:: This file is part of Qt for Python.
-::
-:: $QT_BEGIN_LICENSE:LGPL$
-:: Commercial License Usage
-:: Licensees holding valid commercial Qt licenses may use this file in
-:: accordance with the commercial license agreement provided with the
-:: Software or, alternatively, in accordance with the terms contained in
-:: a written agreement between you and The Qt Company. For licensing terms
-:: and conditions see https://www.qt.io/terms-conditions. For further
-:: information use the contact form at https://www.qt.io/contact-us.
-::
-:: GNU Lesser General Public License Usage
-:: Alternatively, this file may be used under the terms of the GNU Lesser
-:: General Public License version 3 as published by the Free Software
-:: Foundation and appearing in the file LICENSE.LGPL3 included in the
-:: packaging of this file. Please review the following information to
-:: ensure the GNU Lesser General Public License version 3 requirements
-:: will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
-::
-:: GNU General Public License Usage
-:: Alternatively, this file may be used under the terms of the GNU
-:: General Public License version 2.0 or (at your option) the GNU General
-:: Public license version 3 or any later version approved by the KDE Free
-:: Qt Foundation. The licenses are as published by the Free Software
-:: Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
-:: included in the packaging of this file. Please review the following
-:: information to ensure the GNU General Public License requirements will
-:: be met: https://www.gnu.org/licenses/gpl-2.0.html and
-:: https://www.gnu.org/licenses/gpl-3.0.html.
-::
-:: $QT_END_LICENSE$
-::
-::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::#
-
-@ECHO OFF
-
-REM Command file for Sphinx documentation
-
-if "%SPHINXBUILD%" == "" (
-	set SPHINXBUILD=sphinx-build
-)
-set BUILDDIR=_build
-set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% .
-set I18NSPHINXOPTS=%SPHINXOPTS% .
-if NOT "%PAPER%" == "" (
-	set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
-	set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%
-)
-
-if "%1" == "" goto help
-
-if "%1" == "help" (
-	:help
-	echo.Please use `make ^<target^>` where ^<target^> is one of
-	echo.  html       to make standalone HTML files
-	echo.  dirhtml    to make HTML files named index.html in directories
-	echo.  singlehtml to make a single large HTML file
-	echo.  pickle     to make pickle files
-	echo.  json       to make JSON files
-	echo.  htmlhelp   to make HTML files and a HTML help project
-	echo.  qthelp     to make HTML files and a qthelp project
-	echo.  devhelp    to make HTML files and a Devhelp project
-	echo.  epub       to make an epub
-	echo.  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter
-	echo.  text       to make text files
-	echo.  man        to make manual pages
-	echo.  texinfo    to make Texinfo files
-	echo.  gettext    to make PO message catalogs
-	echo.  changes    to make an overview over all changed/added/deprecated items
-	echo.  xml        to make Docutils-native XML files
-	echo.  pseudoxml  to make pseudoxml-XML files for display purposes
-	echo.  linkcheck  to check all external links for integrity
-	echo.  doctest    to run all doctests embedded in the documentation if enabled
-	goto end
-)
-
-if "%1" == "clean" (
-	for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
-	del /q /s %BUILDDIR%\*
-	goto end
-)
-
-
-%SPHINXBUILD% 2> nul
-if errorlevel 9009 (
-	echo.
-	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
-	echo.installed, then set the SPHINXBUILD environment variable to point
-	echo.to the full path of the 'sphinx-build' executable. Alternatively you
-	echo.may add the Sphinx directory to PATH.
-	echo.
-	echo.If you don't have Sphinx installed, grab it from
-	echo.http://sphinx-doc.org/
-	exit /b 1
-)
-
-if "%1" == "html" (
-	%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The HTML pages are in %BUILDDIR%/html.
-	goto end
-)
-
-if "%1" == "dirhtml" (
-	%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
-	goto end
-)
-
-if "%1" == "singlehtml" (
-	%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
-	goto end
-)
-
-if "%1" == "pickle" (
-	%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can process the pickle files.
-	goto end
-)
-
-if "%1" == "json" (
-	%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can process the JSON files.
-	goto end
-)
-
-if "%1" == "htmlhelp" (
-	%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can run HTML Help Workshop with the ^
-.hhp project file in %BUILDDIR%/htmlhelp.
-	goto end
-)
-
-if "%1" == "qthelp" (
-	%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can run "qcollectiongenerator" with the ^
-.qhcp project file in %BUILDDIR%/qthelp, like this:
-	echo.^> qcollectiongenerator %BUILDDIR%\qthelp\PySide.qhcp
-	echo.To view the help file:
-	echo.^> assistant -collectionFile %BUILDDIR%\qthelp\PySide.ghc
-	goto end
-)
-
-if "%1" == "devhelp" (
-	%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished.
-	goto end
-)
-
-if "%1" == "epub" (
-	%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The epub file is in %BUILDDIR%/epub.
-	goto end
-)
-
-if "%1" == "latex" (
-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
-	goto end
-)
-
-if "%1" == "latexpdf" (
-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
-	cd %BUILDDIR%/latex
-	make all-pdf
-	cd %BUILDDIR%/..
-	echo.
-	echo.Build finished; the PDF files are in %BUILDDIR%/latex.
-	goto end
-)
-
-if "%1" == "latexpdfja" (
-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
-	cd %BUILDDIR%/latex
-	make all-pdf-ja
-	cd %BUILDDIR%/..
-	echo.
-	echo.Build finished; the PDF files are in %BUILDDIR%/latex.
-	goto end
-)
-
-if "%1" == "text" (
-	%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The text files are in %BUILDDIR%/text.
-	goto end
-)
-
-if "%1" == "man" (
-	%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The manual pages are in %BUILDDIR%/man.
-	goto end
-)
-
-if "%1" == "texinfo" (
-	%SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.
-	goto end
-)
-
-if "%1" == "gettext" (
-	%SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The message catalogs are in %BUILDDIR%/locale.
-	goto end
-)
-
-if "%1" == "changes" (
-	%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.The overview file is in %BUILDDIR%/changes.
-	goto end
-)
-
-if "%1" == "linkcheck" (
-	%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Link check complete; look for any errors in the above output ^
-or in %BUILDDIR%/linkcheck/output.txt.
-	goto end
-)
-
-if "%1" == "doctest" (
-	%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Testing of doctests in the sources finished, look at the ^
-results in %BUILDDIR%/doctest/output.txt.
-	goto end
-)
-
-if "%1" == "xml" (
-	%SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The XML files are in %BUILDDIR%/xml.
-	goto end
-)
-
-if "%1" == "pseudoxml" (
-	%SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.
-	goto end
-)
-
-:end