ProjectExplorer/Debugger/RL: Make run control state transitions more uniform

Forward all tool and target activities to run control, and initiate
further state transitions (only) from there. Also, make sure
tool/target's on finished() triggered on all finishing code paths.

After that, the base state handling is sufficient to handle remote linux
running and debugging.

Change-Id: I0150ef249c9ad0b7b8ac7192be6dc860c9ca8fc5
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>

14 files changed, 382 insertions, 497 deletions

diff --git a/src/plugins/debugger/debuggerengine.cpp b/src/plugins/debugger/debuggerengine.cpp
index a636bbdfc6f..d99a2cdec08 100644
--- a/src/plugins/debugger/debuggerengine.cpp
+++ b/src/plugins/debugger/debuggerengine.cpp
@@ -674,6 +674,7 @@ void DebuggerEngine::handleStartFailed()
 // Called from RunControl.
 void DebuggerEngine::handleFinished()
 {
+    setState(DebuggerFinished);
     showMessage("HANDLE RUNCONTROL FINISHED");
     d->m_runTool.clear();
     d->m_progress.setProgressValue(1000);
@@ -821,7 +822,7 @@ void DebuggerEngine::notifyEngineSetupOk()
 
     QTC_ASSERT(state() == EngineSetupRequested, qDebug() << this << state());
     setState(EngineSetupOk);
-    runTool()->reportPrepared();
+    runTool()->reportSuccess();
 }
 
 void DebuggerEngine::setupSlaveInferior()
@@ -907,7 +908,7 @@ void DebuggerEngine::notifyEngineRequestRemoteSetup()
                << "remoteSetupState" << d->remoteSetupState());
 
     d->setRemoteSetupState(RemoteSetupRequested);
-    runTool()->requestRemoteSetup();
+    runTool()->doRemoteSetup();
 }
 
 void DebuggerEngine::notifyEngineRemoteServerRunning(const QString &, int /*pid*/)
@@ -915,6 +916,30 @@ void DebuggerEngine::notifyEngineRemoteServerRunning(const QString &, int /*pid*
     showMessage("NOTE: REMOTE SERVER RUNNING IN MULTIMODE");
 }
 
+void DebuggerEngine::setRemoteParameters(const RemoteSetupResult &result)
+{
+    showMessage(QString("NOTE: REMOTE SETUP DONE: GDB SERVER PORT: %1  QML PORT %2")
+                .arg(result.gdbServerPort.number()).arg(result.qmlServerPort.number()));
+
+    if (result.gdbServerPort.isValid()) {
+        QString &rc = d->m_runParameters.remoteChannel;
+        const int sepIndex = rc.lastIndexOf(':');
+        if (sepIndex != -1) {
+            rc.replace(sepIndex + 1, rc.count() - sepIndex - 1,
+                       QString::number(result.gdbServerPort.number()));
+        }
+    } else if (result.inferiorPid != InvalidPid && runParameters().startMode == AttachExternal) {
+        // e.g. iOS Simulator
+        runParameters().attachPID = ProcessHandle(result.inferiorPid);
+    }
+
+    if (result.qmlServerPort.isValid()) {
+        d->m_runParameters.qmlServer.port = result.qmlServerPort;
+        d->m_runParameters.inferior.commandLineArguments.replace("%qml_port%",
+                        QString::number(result.qmlServerPort.number()));
+    }
+}
+
 void DebuggerEngine::notifyEngineRemoteSetupFinished(const RemoteSetupResult &result)
 {
     QTC_ASSERT(state() == EngineSetupRequested
@@ -926,30 +951,9 @@ void DebuggerEngine::notifyEngineRemoteSetupFinished(const RemoteSetupResult &re
                qDebug() << this << "remoteSetupState" << d->remoteSetupState());
 
     if (result.success) {
-        showMessage(QString("NOTE: REMOTE SETUP DONE: GDB SERVER PORT: %1  QML PORT %2")
-                    .arg(result.gdbServerPort.number()).arg(result.qmlServerPort.number()));
-
         if (d->remoteSetupState() != RemoteSetupCancelled)
             d->setRemoteSetupState(RemoteSetupSucceeded);
-
-        if (result.gdbServerPort.isValid()) {
-            QString &rc = d->m_runParameters.remoteChannel;
-            const int sepIndex = rc.lastIndexOf(':');
-            if (sepIndex != -1) {
-                rc.replace(sepIndex + 1, rc.count() - sepIndex - 1,
-                           QString::number(result.gdbServerPort.number()));
-            }
-        } else if (result.inferiorPid != InvalidPid && runParameters().startMode == AttachExternal) {
-            // e.g. iOS Simulator
-            runParameters().attachPID = ProcessHandle(result.inferiorPid);
-        }
-
-        if (result.qmlServerPort.isValid()) {
-            d->m_runParameters.qmlServer.port = result.qmlServerPort;
-            d->m_runParameters.inferior.commandLineArguments.replace("%qml_port%",
-                            QString::number(result.qmlServerPort.number()));
-        }
-
+        setRemoteParameters(result);
     } else {
         d->setRemoteSetupState(RemoteSetupFailed);
         showMessage("NOTE: REMOTE SETUP FAILED: " + result.reason);
diff --git a/src/plugins/debugger/debuggerengine.h b/src/plugins/debugger/debuggerengine.h
index 2eb56d7092f..75a1174af9e 100644
--- a/src/plugins/debugger/debuggerengine.h
+++ b/src/plugins/debugger/debuggerengine.h
@@ -381,6 +381,8 @@ protected:
     void notifyDebuggerProcessFinished(int exitCode, QProcess::ExitStatus exitStatus,
                                        const QString &backendName);
 
+    void setRemoteParameters(const RemoteSetupResult &result);
+
 protected:
     virtual void notifyInferiorShutdownOk();
     virtual void notifyInferiorShutdownFailed();
diff --git a/src/plugins/debugger/debuggerruncontrol.cpp b/src/plugins/debugger/debuggerruncontrol.cpp
index 38775f4b25c..9e62606f364 100644
--- a/src/plugins/debugger/debuggerruncontrol.cpp
+++ b/src/plugins/debugger/debuggerruncontrol.cpp
@@ -52,8 +52,10 @@
 
 #include <utils/checkablemessagebox.h>
 #include <utils/fileutils.h>
+#include <utils/portlist.h>
 #include <utils/qtcassert.h>
 #include <utils/qtcprocess.h>
+
 #include <coreplugin/icore.h>
 #include <coreplugin/coreconstants.h>
 #include <qmldebug/qmldebugcommandlinearguments.h>
@@ -126,9 +128,7 @@ void DebuggerRunTool::start()
     if (rp.startMode == StartInternal
             && rp.inferior.executable.isEmpty()
             && rp.interpreter.isEmpty()) {
-        appendMessage(tr("No executable specified.") + QLatin1Char('\n'), ErrorMessageFormat);
-        runControl()->reportApplicationStart();
-        runControl()->reportApplicationStop();
+        reportFailure(tr("No executable specified.") + '\n');
         return;
     }
 
@@ -177,6 +177,11 @@ void DebuggerRunTool::notifyEngineRemoteSetupFinished(const RemoteSetupResult &r
     m_engine->notifyEngineRemoteSetupFinished(result);
 }
 
+void DebuggerRunTool::setRemoteParameters(const RemoteSetupResult &result)
+{
+    m_engine->setRemoteParameters(result);
+}
+
 void DebuggerRunTool::stop()
 {
     m_engine->quitDebugger();
@@ -202,6 +207,11 @@ DebuggerStartParameters &DebuggerRunTool::startParameters()
     return m_engine->runParameters();
 }
 
+int DebuggerRunTool::portsUsedByDebugger() const
+{
+    return isCppDebugging() + isQmlDebugging();
+}
+
 void DebuggerRunTool::notifyInferiorIll()
 {
     m_engine->notifyInferiorIll();
@@ -510,6 +520,12 @@ void DebuggerRunTool::setStartParameters(const DebuggerStartParameters &sp, QStr
 
 void DebuggerRunTool::setRunParameters(const DebuggerRunParameters &rp, QString *errorMessage)
 {
+    int portsUsed = portsUsedByDebugger();
+    if (portsUsed > device()->freePorts().count()) {
+        *errorMessage = tr("Cannot debug: Not enough free ports available.");
+        return;
+    }
+
     DebuggerRunParameters m_rp = rp;
 
     runControl()->setDisplayName(m_rp.displayName);
@@ -540,6 +556,14 @@ void DebuggerRunTool::setRunParameters(const DebuggerRunParameters &rp, QString
     m_engine->setRunTool(this);
 }
 
+void DebuggerRunTool::appendSolibSearchPath(const QString &str)
+{
+    QString path = str;
+    DebuggerStartParameters &sp = startParameters();
+    path.replace("%{sysroot}", sp.sysRoot);
+    sp.solibSearchPath.append(path);
+}
+
 DebuggerRunTool::~DebuggerRunTool()
 {
     disconnect();
diff --git a/src/plugins/debugger/debuggerruncontrol.h b/src/plugins/debugger/debuggerruncontrol.h
index 65e13e9cf0a..fef388cc91b 100644
--- a/src/plugins/debugger/debuggerruncontrol.h
+++ b/src/plugins/debugger/debuggerruncontrol.h
@@ -69,6 +69,7 @@ public:
     void startFailed();
     void notifyEngineRemoteServerRunning(const QByteArray &msg, int pid);
     void notifyEngineRemoteSetupFinished(const RemoteSetupResult &result);
+    void setRemoteParameters(const RemoteSetupResult &result);
     void notifyInferiorIll();
     Q_SLOT void notifyInferiorExited();
     void quitDebugger();
@@ -79,6 +80,10 @@ public:
 
     bool isCppDebugging() const { return m_isCppDebugging; }
     bool isQmlDebugging() const { return m_isQmlDebugging; }
+    int portsUsedByDebugger() const;
+
+    virtual void doRemoteSetup() { emit requestRemoteSetup(); }
+    void appendSolibSearchPath(const QString &str);
 
 signals:
     void stateChanged(Debugger::DebuggerState state);
diff --git a/src/plugins/projectexplorer/runconfiguration.cpp b/src/plugins/projectexplorer/runconfiguration.cpp
index 5215de63245..9f6b6e32059 100644
--- a/src/plugins/projectexplorer/runconfiguration.cpp
+++ b/src/plugins/projectexplorer/runconfiguration.cpp
@@ -60,6 +60,8 @@
 using namespace Utils;
 using namespace ProjectExplorer::Internal;
 
+const bool debugStates = false;
+
 namespace ProjectExplorer {
 
 ///////////////////////////////////////////////////////////////////////
@@ -522,7 +524,7 @@ public:
 
     ~RunControlPrivate()
     {
-        QTC_CHECK(state == State::Stopped);
+        QTC_CHECK(state == State::Stopped || state == State::Initialized);
         delete targetRunner;
         delete toolRunner;
         delete outputFormatter;
@@ -544,6 +546,9 @@ public:
     void checkState(State expectedState);
     void setState(State state);
 
+    void debugMessage(const QString &msg);
+    QString stateName(State s) const;
+
     void initiateStart();
 
     void onTargetPrepared();
@@ -560,10 +565,17 @@ public:
 
     void initiateStop();
     void onToolStopped();
+    void onToolStopFailed(const QString &msg);
+
     void onTargetStopped();
+    void onTargetStopFailed(const QString &msg);
 
     void onToolFailed(const QString &msg);
+    void onToolSuccess();
+
     void onTargetFailed(const QString &msg);
+    void onTargetSuccess();
+
     void handleFailure();
 
     void showError(const QString &msg);
@@ -659,14 +671,16 @@ void RunControlPrivate::initiateStart()
 {
     checkState(State::Initialized);
     setState(State::TargetPreparing);
-    targetRunner->prepare();
+    debugMessage("Queue: Prepare target runner");
+    QTimer::singleShot(0, targetRunner, &TargetRunner::prepare);
 }
 
 void RunControlPrivate::onTargetPrepared()
 {
     checkState(State::TargetPreparing);
     setState(State::ToolPreparing);
-    toolRunner->prepare();
+    debugMessage("Queue: Prepare tool runner");
+    QTimer::singleShot(0, toolRunner, &ToolRunner::prepare);
 }
 
 void RunControlPrivate::onTargetPrepareFailed(const QString &msg)
@@ -681,7 +695,8 @@ void RunControlPrivate::onToolPrepared()
 {
     checkState(State::ToolPreparing);
     setState(State::TargetStarting);
-    targetRunner->start();
+    debugMessage("Queue: Start target runner");
+    QTimer::singleShot(0, targetRunner, &TargetRunner::start);
 }
 
 void RunControlPrivate::onToolPrepareFailed(const QString &msg)
@@ -696,7 +711,8 @@ void RunControlPrivate::onTargetStarted()
 {
     checkState(State::TargetStarting);
     setState(State::ToolStarting);
-    toolRunner->start();
+    debugMessage("Queue: Start tool runner");
+    QTimer::singleShot(0, toolRunner, &ToolRunner::start);
 }
 
 void RunControlPrivate::onTargetStartFailed(const QString &msg)
@@ -725,54 +741,109 @@ void RunControlPrivate::initiateStop()
 {
     checkState(State::Running);
     setState(State::ToolStopping);
-    toolRunner->stop();
+    debugMessage("Queue: Stop tool runner");
+    QTimer::singleShot(0, toolRunner, &ToolRunner::stop);
 }
 
 void RunControlPrivate::onToolStopped()
 {
     toolRunner->onStop();
+    debugMessage("Tool stopped");
     checkState(State::ToolStopping);
     setState(State::TargetStopping);
-    targetRunner->stop();
+    debugMessage("Queue: Stop target runner");
+    QTimer::singleShot(0, targetRunner, &TargetRunner::stop);
+}
+
+void RunControlPrivate::onToolStopFailed(const QString &msg)
+{
+    checkState(State::ToolStopping);
+    targetRunner->onToolFailure();
+    debugMessage("Tool stop failed");
+    showError(msg);
+    setState(State::Stopped);
 }
 
 void RunControlPrivate::onTargetStopped()
 {
+    targetRunner->onStop();
+    debugMessage("Target stopped");
     checkState(State::TargetStopping);
     setState(State::Stopped);
-    QTC_CHECK(applicationProcessHandle.isValid());
-    q->setApplicationProcessHandle(Utils::ProcessHandle());
+}
 
-    toolRunner->onFinished();
-    targetRunner->onFinished();
+void RunControlPrivate::onTargetStopFailed(const QString &msg)
+{
+    debugMessage("Target stop failed");
+    checkState(State::TargetStopping);
+    toolRunner->onTargetFailure();
+    showError(msg);
+    setState(State::Stopped);
 }
 
 void RunControlPrivate::onTargetFailed(const QString &msg)
 {
+    debugMessage("Target operation failed");
     if (state == State::TargetPreparing) {
         onTargetPrepareFailed(msg);
     } else if (state == State::TargetStarting) {
         onTargetStartFailed(msg);
+    } else if (state == State::TargetStopping) {
+        onTargetStopFailed(msg);
     } else {
         showError(msg);
-//        showError(RunControl::tr("Unexpected state: %1").arg(int(state)));
+        showError(RunControl::tr("Unexpected state: %1").arg(int(state)));
+        setState(State::Stopped);
+    }
+}
+
+void RunControlPrivate::onTargetSuccess()
+{
+    debugMessage("Target operation successful");
+    if (state == State::TargetPreparing) {
+        onTargetPrepared();
+    } else if (state == State::TargetStarting) {
+        onTargetStarted();
+    } else if (state == State::TargetStopping) {
+        onTargetStopped();
+    } else {
+        showError(RunControl::tr("Unexpected state: %1").arg(int(state)));
         setState(State::Stopped);
     }
 }
 
 void RunControlPrivate::onToolFailed(const QString &msg)
 {
+    debugMessage("Tool operation failed");
     if (state == State::ToolPreparing) {
         onToolPrepareFailed(msg);
     } else if (state == State::ToolStarting) {
         onToolStartFailed(msg);
+    } else if (state == State::ToolStopping) {
+        onToolStartFailed(msg);
     } else {
         showError(msg);
-//        showError(RunControl::tr("Unexpected state: %1").arg(int(state)));
+        showError(RunControl::tr("Unexpected state: %1").arg(int(state)));
+        setState(State::Stopped);
+    }
+}
+
+void RunControlPrivate::onToolSuccess()
+{
+    debugMessage("Tool operation successful");
+    if (state == State::ToolPreparing) {
+        onToolPrepared();
+    } else if (state == State::ToolStarting) {
+        onToolStarted();
+    } else if (state == State::ToolStopping) {
+        onToolStopped();
+    } else {
+        showError(RunControl::tr("Unexpected state: %1").arg(int(state)));
         setState(State::Stopped);
     }
 }
 
+
 void RunControlPrivate::handleFailure()
 {
     switch (state) {
@@ -1028,6 +1099,24 @@ void RunControlPrivate::checkState(State expectedState)
         qDebug() << "Unexpected state " << expectedState << " have: " << state;
 }
 
+QString RunControlPrivate::stateName(State s) const
+{
+#    define SN(x) case x: return QLatin1String(#x);
+    switch (s) {
+        SN(State::Initialized)
+        SN(State::TargetPreparing)
+        SN(State::ToolPreparing)
+        SN(State::TargetStarting)
+        SN(State::ToolStarting)
+        SN(State::Running)
+        SN(State::ToolStopping)
+        SN(State::TargetStopping)
+        SN(State::Stopped)
+    }
+    return QLatin1String("<unknown>");
+#    undef SN
+}
+
 void RunControlPrivate::setState(State newState)
 {
     if (!isAllowedTransition(state, newState))
@@ -1035,20 +1124,32 @@ void RunControlPrivate::setState(State newState)
 
     state = newState;
 
+    debugMessage("Entering state " + stateName(newState));
+
     // Extra reporting.
     switch (state) {
     case State::Running:
         emit q->started();
         break;
     case State::Stopped:
-        emit q->finished();
+        QTC_CHECK(applicationProcessHandle.isValid());
+        q->setApplicationProcessHandle(Utils::ProcessHandle());
+        toolRunner->onFinished();
+        targetRunner->onFinished();
         state = State::Initialized; // Reset for potential re-running.
+        emit q->finished();
         break;
     default:
         break;
     }
 }
 
+void RunControlPrivate::debugMessage(const QString &msg)
+{
+    if (debugStates)
+        q->appendMessage(msg + '\n', Utils::DebugFormat);
+}
+
 /*!
     Brings the application determined by this RunControl's \c applicationProcessHandle
     to the foreground.
@@ -1079,8 +1180,7 @@ void RunControl::reportApplicationStop()
         // multiple times. Fix it there and then add a soft assert here.
         return;
     }
-    d->onToolStopped();
-    emit finished();
+    d->onTargetStopped();
 }
 
 void RunControl::bringApplicationToForegroundInternal()
@@ -1145,9 +1245,9 @@ void SimpleTargetRunner::start()
         QTC_ASSERT(r.is<StandardRunnable>(), return);
         const QString executable = r.as<StandardRunnable>().executable;
         if (executable.isEmpty()) {
-            reportStartFailed(RunControl::tr("No executable specified."));
+            reportFailure(RunControl::tr("No executable specified."));
         }  else if (!QFileInfo::exists(executable)) {
-            reportStartFailed(RunControl::tr("Executable %1 does not exist.")
+            reportFailure(RunControl::tr("Executable %1 does not exist.")
                               .arg(QDir::toNativeSeparators(executable)));
         } else {
             QString msg = RunControl::tr("Starting %1...").arg(QDir::toNativeSeparators(executable)) + '\n';
@@ -1173,7 +1273,7 @@ void SimpleTargetRunner::start()
         connect(&m_launcher, &ApplicationLauncher::finished,
                 this, [this] {
                     m_launcher.disconnect(this);
-                    reportStopped();
+                    reportSuccess();
                 });
 
         connect(&m_launcher, &ApplicationLauncher::reportProgress,
@@ -1195,7 +1295,7 @@ void SimpleTargetRunner::onProcessStarted()
     // Console processes only know their pid after being started
     runControl()->setApplicationProcessHandle(m_launcher.applicationPID());
     runControl()->bringApplicationToForeground();
-    reportStarted();
+    reportSuccess();
 }
 
 void SimpleTargetRunner::onProcessFinished(int exitCode, QProcess::ExitStatus status)
@@ -1219,6 +1319,10 @@ TargetRunner::TargetRunner(RunControl *runControl)
     runControl->setTargetRunner(this);
 }
 
+TargetRunner::~TargetRunner()
+{
+}
+
 RunControl *TargetRunner::runControl() const
 {
     return m_runControl;
@@ -1236,46 +1340,27 @@ IDevice::ConstPtr TargetRunner::device() const
 
 void TargetRunner::prepare()
 {
-    reportPrepared(); // By default nothing to do, all is fine.
-}
-
-void TargetRunner::reportPrepareFailed(const QString &msg)
-{
-    m_runControl->d->onTargetPrepareFailed(msg);
-}
-
-void TargetRunner::reportPrepared()
-{
-    QTC_ASSERT(m_runControl, return);
-    m_runControl->d->onTargetPrepared();
+    reportSuccess(); // By default nothing to do, all is fine.
 }
 
 void TargetRunner::start()
 {
-    reportStarted();
-}
-
-void TargetRunner::reportStartFailed(const QString &msg)
-{
-    m_runControl->d->onTargetStartFailed(msg);
+    reportSuccess();
 }
 
 void TargetRunner::stop()
 {
-    reportStopped(); // By default all is fine.
+    reportSuccess(); // By default all is fine.
 }
 
-void TargetRunner::reportStarted()
+void TargetRunner::reportStopped()
 {
-    QTC_ASSERT(m_runControl, return);
-    m_runControl->d->onTargetStarted();
+    m_runControl->d->onTargetStopped();
 }
 
-void TargetRunner::reportStopped()
+void TargetRunner::reportSuccess()
 {
-    QTC_ASSERT(m_runControl, return);
-    onStop();
-    m_runControl->d->onTargetStopped();
+    m_runControl->d->onTargetSuccess();
 }
 
 void TargetRunner::reportFailure(const QString &msg)
@@ -1292,6 +1377,10 @@ ToolRunner::ToolRunner(RunControl *runControl)
         runControl->setToolRunner(this);
 }
 
+ToolRunner::~ToolRunner()
+{
+}
+
 RunControl *ToolRunner::runControl() const
 {
     return m_runControl;
@@ -1319,46 +1408,27 @@ const Connection &ToolRunner::connection() const
 
 void ToolRunner::prepare()
 {
-    reportPrepared();
-}
-
-void ToolRunner::reportPrepared()
-{
-    m_runControl->d->onToolPrepared();
+    reportSuccess();
 }
 
 void ToolRunner::start()
 {
-    reportStarted();
-}
-
-void ToolRunner::reportStartFailed(const QString &msg)
-{
-    QTC_CHECK(m_runControl->d->state == RunControlPrivate::State::ToolStarting);
-    m_runControl->d->targetRunner->onToolFailure();
-    reportFailure(msg);
-}
-
-void ToolRunner::reportStarted()
-{
-    m_runControl->d->onToolStarted();
+    reportSuccess();
 }
 
 void ToolRunner::stop()
 {
-    reportStopped();
+    reportSuccess();
 }
 
-void ToolRunner::reportStopFailed(const QString &msg)
+void ToolRunner::reportStopped()
 {
-    QTC_CHECK(m_runControl->d->state == RunControlPrivate::State::ToolStopping);
-    m_runControl->d->targetRunner->onToolFailure();
-    reportFailure(msg);
+    m_runControl->d->onToolStopped();
 }
 
-void ToolRunner::reportStopped()
+void ToolRunner::reportSuccess()
 {
-    m_runControl->d->onToolStopped();
+    m_runControl->d->onToolSuccess();
 }
 
 void ToolRunner::reportFailure(const QString &msg)
diff --git a/src/plugins/projectexplorer/runconfiguration.h b/src/plugins/projectexplorer/runconfiguration.h
index cc7298ac982..dab5a3b9658 100644
--- a/src/plugins/projectexplorer/runconfiguration.h
+++ b/src/plugins/projectexplorer/runconfiguration.h
@@ -454,6 +454,7 @@ class PROJECTEXPLORER_EXPORT TargetRunner : public QObject
 
 public:
     explicit TargetRunner(RunControl *runControl);
+    ~TargetRunner() override;
 
     RunControl *runControl() const;
     void appendMessage(const QString &msg, Utils::OutputFormat format);
@@ -461,20 +462,16 @@ public:
 
     // Preparation phase.
     virtual void prepare(); // Initiate setup. Needs to report result.
-    void reportPrepareFailed(const QString &msg = QString());
-    void reportPrepared();
-
     // Startup phase.
     virtual void start(); // Initiates start. Needs to report result.
-    void reportStartFailed(const QString &msg = QString());
-    void reportStarted();
-
     // Stopping phase.
     virtual void stop(); // Initiates stop. Needs to report result.
-    void reportStopFailed(const QString &msg = QString());
-    void reportStopped();
 
-    // Generic error in uncertain state.
+    //
+    void reportStopped();
+    // Generic success report, proceed to next stage.
+    void reportSuccess();
+    // Generic error, start ramp down.
     void reportFailure(const QString &msg = QString());
 
     // Customization points. No reporting required nor wanted.
@@ -497,6 +494,7 @@ class PROJECTEXPLORER_EXPORT ToolRunner : public QObject
 
 public:
     explicit ToolRunner(RunControl *runControl);
+    ~ToolRunner() override;
 
     RunControl *runControl() const;
 
@@ -508,20 +506,16 @@ public:
 
     // Preparation phase.
     virtual void prepare(); // Initiates preparation, needs to report success or failure.
-    void reportPrepareFailed(const QString &msg = QString());
-    void reportPrepared();
-
     // Start phase.
     virtual void start();
-    void reportStartFailed(const QString &msg = QString());
-    void reportStarted();
-
     // Stop phase.
     virtual void stop();
-    void reportStopFailed(const QString &msg = QString());
-    void reportStopped();
 
-    // Generic error in uncertain state.
+    //
+    void reportStopped();
+    // Generic success report, proceed to next stage.
+    void reportSuccess();
+    // Generic error, start ramp down.
     void reportFailure(const QString &msg = QString());
 
     // Customization points. No reporting required nor wanted.
diff --git a/src/plugins/remotelinux/abstractremotelinuxrunsupport.cpp b/src/plugins/remotelinux/abstractremotelinuxrunsupport.cpp
index dd410d505a5..4dc313d5e6d 100644
--- a/src/plugins/remotelinux/abstractremotelinuxrunsupport.cpp
+++ b/src/plugins/remotelinux/abstractremotelinuxrunsupport.cpp
@@ -34,6 +34,7 @@
 #include <utils/portlist.h>
 
 using namespace ProjectExplorer;
+using namespace Utils;
 
 namespace RemoteLinux {
 namespace Internal {
@@ -42,11 +43,11 @@ class AbstractRemoteLinuxRunSupportPrivate
 {
 public:
     ApplicationLauncher launcher;
-    AbstractRemoteLinuxRunSupport::State state = AbstractRemoteLinuxRunSupport::Inactive;
     DeviceUsedPortsGatherer portsGatherer;
     ApplicationLauncher fifoCreator;
-    Utils::PortList portList;
+    PortList portList;
     QString fifo;
+    bool usesFifo = false;
 };
 
 } // namespace Internal
@@ -61,7 +62,6 @@ AbstractRemoteLinuxRunSupport::AbstractRemoteLinuxRunSupport(RunControl *runCont
 
 AbstractRemoteLinuxRunSupport::~AbstractRemoteLinuxRunSupport()
 {
-    setFinished();
     delete d;
 }
 
@@ -70,42 +70,12 @@ ApplicationLauncher *AbstractRemoteLinuxRunSupport::applicationLauncher()
     return &d->launcher;
 }
 
-void AbstractRemoteLinuxRunSupport::setState(AbstractRemoteLinuxRunSupport::State state)
+void AbstractRemoteLinuxRunSupport::setUsesFifo(bool on)
 {
-    d->state = state;
+    d->usesFifo = on;
 }
 
-AbstractRemoteLinuxRunSupport::State AbstractRemoteLinuxRunSupport::state() const
-{
-    return d->state;
-}
-
-void AbstractRemoteLinuxRunSupport::handleResourcesError(const QString &message)
-{
-    QTC_ASSERT(d->state == GatheringResources, return);
-    setFinished();
-    reset();
-    emit adapterSetupFailed(message);
-}
-
-void AbstractRemoteLinuxRunSupport::handleResourcesAvailable()
-{
-    QTC_ASSERT(d->state == GatheringResources, return);
-
-    d->portList = device()->freePorts();
-    emit executionStartRequested();
-}
-
-void AbstractRemoteLinuxRunSupport::setFinished()
-{
-    if (d->state == Inactive)
-        return;
-    if (d->state == Running)
-        applicationLauncher()->stop();
-    d->state = Inactive;
-}
-
-Utils::Port AbstractRemoteLinuxRunSupport::findPort() const
+Port AbstractRemoteLinuxRunSupport::findPort() const
 {
     return d->portsGatherer.getNextFreePort(&d->portList);
 }
@@ -115,21 +85,31 @@ QString AbstractRemoteLinuxRunSupport::fifo() const
     return d->fifo;
 }
 
+void AbstractRemoteLinuxRunSupport::prepare()
+{
+    if (d->usesFifo)
+        createRemoteFifo();
+    else
+        startPortsGathering();
+}
+
 void AbstractRemoteLinuxRunSupport::startPortsGathering()
 {
-    QTC_ASSERT(d->state == Inactive, return);
-    d->state = GatheringResources;
-    connect(&d->portsGatherer, &DeviceUsedPortsGatherer::error,
-            this, &AbstractRemoteLinuxRunSupport::handleResourcesError);
-    connect(&d->portsGatherer, &DeviceUsedPortsGatherer::portListReady,
-            this, &AbstractRemoteLinuxRunSupport::handleResourcesAvailable);
+    appendMessage(tr("Checking available ports...") + '\n', NormalMessageFormat);
+    connect(&d->portsGatherer, &DeviceUsedPortsGatherer::error, this, [&](const QString &msg) {
+        reportFailure(msg);
+    });
+    connect(&d->portsGatherer, &DeviceUsedPortsGatherer::portListReady, this, [&] {
+        d->portList = device()->freePorts();
+        //appendMessage(tr("Found %1 free ports").arg(d->portList.count()), NormalMessageFormat);
+        reportSuccess();
+    });
     d->portsGatherer.start(device());
 }
 
 void AbstractRemoteLinuxRunSupport::createRemoteFifo()
 {
-    QTC_ASSERT(d->state == Inactive, return);
-    d->state = GatheringResources;
+    appendMessage(tr("Creating remote socket...") + '\n', NormalMessageFormat);
 
     StandardRunnable r;
     r.executable = QLatin1String("/bin/sh");
@@ -143,10 +123,11 @@ void AbstractRemoteLinuxRunSupport::createRemoteFifo()
     connect(&d->fifoCreator, &ApplicationLauncher::finished,
             this, [this, output, errors](bool success) {
         if (!success) {
-            handleResourcesError(QString("Failed to create fifo: %1").arg(QLatin1String(*errors)));
+            reportFailure(QString("Failed to create fifo: %1").arg(QLatin1String(*errors)));
         } else {
             d->fifo = QString::fromLatin1(*output);
-            handleResourcesAvailable();
+            //appendMessage(tr("Created fifo").arg(d->fifo), NormalMessageFormat);
+            reportSuccess();
         }
     });
 
@@ -163,11 +144,53 @@ void AbstractRemoteLinuxRunSupport::createRemoteFifo()
     d->fifoCreator.start(r, device());
 }
 
-void AbstractRemoteLinuxRunSupport::reset()
+void AbstractRemoteLinuxRunSupport::start()
 {
+    connect(&d->launcher, &ApplicationLauncher::remoteStderr,
+            this, &AbstractRemoteLinuxRunSupport::handleRemoteErrorOutput);
+    connect(&d->launcher, &ApplicationLauncher::remoteStdout,
+            this, &AbstractRemoteLinuxRunSupport::handleRemoteOutput);
+    connect(&d->launcher, &ApplicationLauncher::finished,
+            this, &AbstractRemoteLinuxRunSupport::handleAppRunnerFinished);
+    connect(&d->launcher, &ApplicationLauncher::reportProgress,
+            this, &AbstractRemoteLinuxRunSupport::handleProgressReport);
+    connect(&d->launcher, &ApplicationLauncher::reportError,
+            this, &AbstractRemoteLinuxRunSupport::handleAppRunnerError);
+    connect(&d->launcher, &ApplicationLauncher::remoteProcessStarted,
+            this, &TargetRunner::reportSuccess);
+    d->launcher.start(runControl()->runnable(), device());
+}
+
+void AbstractRemoteLinuxRunSupport::onFinished()
+{
+    d->launcher.disconnect(this);
+    d->launcher.stop();
     d->portsGatherer.disconnect(this);
-    applicationLauncher()->disconnect(this);
-    d->state = Inactive;
+}
+
+void AbstractRemoteLinuxRunSupport::handleAppRunnerFinished(bool success)
+{
+    success ? reportStopped() : reportFailure();
+}
+
+void AbstractRemoteLinuxRunSupport::handleAppRunnerError(const QString &error)
+{
+    reportFailure(error);
+}
+
+void AbstractRemoteLinuxRunSupport::handleRemoteOutput(const QByteArray &output)
+{
+    appendMessage(QString::fromUtf8(output), StdOutFormat);
+}
+
+void AbstractRemoteLinuxRunSupport::handleRemoteErrorOutput(const QByteArray &output)
+{
+    appendMessage(QString::fromUtf8(output), StdErrFormat);
+}
+
+void AbstractRemoteLinuxRunSupport::handleProgressReport(const QString &progressOutput)
+{
+    appendMessage(progressOutput + '\n', LogMessageFormat);
 }
 
 } // namespace RemoteLinux
diff --git a/src/plugins/remotelinux/abstractremotelinuxrunsupport.h b/src/plugins/remotelinux/abstractremotelinuxrunsupport.h
index 9502972dfa0..a914d48ea7f 100644
--- a/src/plugins/remotelinux/abstractremotelinuxrunsupport.h
+++ b/src/plugins/remotelinux/abstractremotelinuxrunsupport.h
@@ -41,39 +41,30 @@ class REMOTELINUX_EXPORT AbstractRemoteLinuxRunSupport : public ProjectExplorer:
     Q_OBJECT
 
 public:
-    enum State
-    {
-        Inactive,
-        GatheringResources,
-        StartingRunner,
-        Running
-    };
-
     explicit AbstractRemoteLinuxRunSupport(ProjectExplorer::RunControl *runControl);
     ~AbstractRemoteLinuxRunSupport();
 
     ProjectExplorer::ApplicationLauncher *applicationLauncher();
 
-    void setState(State state);
-    State state() const;
-
-    void setFinished();
+    void setUsesFifo(bool on);
 
-    void startPortsGathering();
     Utils::Port findPort() const;
-
-    void createRemoteFifo();
     QString fifo() const;
 
-    void reset();
+private:
+    void prepare() override;
+    void start() override;
+    void onFinished() override;
 
-signals:
-    void adapterSetupFailed(const QString &error);
-    void executionStartRequested();
+    void createRemoteFifo();
+    void startPortsGathering();
 
-private:
-    void handleResourcesError(const QString &message);
-    void handleResourcesAvailable();
+    void handleAppRunnerError(const QString &error);
+    void handleRemoteOutput(const QByteArray &output);
+    void handleRemoteErrorOutput(const QByteArray &output);
+    void handleAppRunnerFinished(bool success);
+    void handleProgressReport(const QString &progressOutput);
+    void handleAdapterSetupDone();
 
     Internal::AbstractRemoteLinuxRunSupportPrivate * const d;
 };
diff --git a/src/plugins/remotelinux/remotelinuxanalyzesupport.cpp b/src/plugins/remotelinux/remotelinuxanalyzesupport.cpp
index 9349f432fe5..4652734e2f9 100644
--- a/src/plugins/remotelinux/remotelinuxanalyzesupport.cpp
+++ b/src/plugins/remotelinux/remotelinuxanalyzesupport.cpp
@@ -53,16 +53,17 @@ class RemoteLinuxAnalyzeSupportPrivate
 public:
     RemoteLinuxAnalyzeSupportPrivate(RunControl *runControl)
     {
-        if (runControl->runMode() != ProjectExplorer::Constants::PERFPROFILER_RUN_MODE)
-            return;
-        RunConfiguration *runConfiguration = runControl->runConfiguration();
-        QTC_ASSERT(runConfiguration, return);
-        IRunConfigurationAspect *perfAspect =
-                runConfiguration->extraAspect("Analyzer.Perf.Settings");
-        QTC_ASSERT(perfAspect, return);
-        perfRecordArguments =
-                perfAspect->currentSettings()->property("perfRecordArguments").toStringList()
-                .join(' ');
+        if (runControl->runMode() == ProjectExplorer::Constants::PERFPROFILER_RUN_MODE) {
+            usesFifo = true;
+            RunConfiguration *runConfiguration = runControl->runConfiguration();
+            QTC_ASSERT(runConfiguration, return);
+            IRunConfigurationAspect *perfAspect =
+                    runConfiguration->extraAspect("Analyzer.Perf.Settings");
+            QTC_ASSERT(perfAspect, return);
+            perfRecordArguments =
+                    perfAspect->currentSettings()->property("perfRecordArguments").toStringList()
+                    .join(' ');
+        }
     }
 
     Utils::Port qmlPort;
@@ -71,6 +72,7 @@ public:
 
     ApplicationLauncher outputGatherer;
     QmlDebug::QmlOutputParser outputParser;
+    bool usesFifo = false;
 };
 
 } // namespace Internal
@@ -81,19 +83,9 @@ RemoteLinuxAnalyzeSupport::RemoteLinuxAnalyzeSupport(RunControl *runControl)
     : ToolRunner(runControl),
       d(new RemoteLinuxAnalyzeSupportPrivate(runControl))
 {
-    connect(runControl, &RunControl::starting,
-            this, &RemoteLinuxAnalyzeSupport::handleRemoteSetupRequested);
     connect(&d->outputParser, &QmlDebug::QmlOutputParser::waitingForConnectionOnPort,
             this, &RemoteLinuxAnalyzeSupport::remoteIsRunning);
-    connect(runControl, &RunControl::finished,
-            this, &RemoteLinuxAnalyzeSupport::handleProfilingFinished);
-
-    connect(qobject_cast<AbstractRemoteLinuxRunSupport *>(runControl->targetRunner()),
-            &AbstractRemoteLinuxRunSupport::executionStartRequested,
-            this, &RemoteLinuxAnalyzeSupport::startExecution);
-    connect(qobject_cast<AbstractRemoteLinuxRunSupport *>(runControl->targetRunner()),
-            &AbstractRemoteLinuxRunSupport::adapterSetupFailed,
-            this, &RemoteLinuxAnalyzeSupport::handleAdapterSetupFailed);
+    targetRunner()->setUsesFifo(runControl->runMode() == ProjectExplorer::Constants::PERFPROFILER_RUN_MODE);
 }
 
 RemoteLinuxAnalyzeSupport::~RemoteLinuxAnalyzeSupport()
@@ -103,48 +95,27 @@ RemoteLinuxAnalyzeSupport::~RemoteLinuxAnalyzeSupport()
 
 void RemoteLinuxAnalyzeSupport::showMessage(const QString &msg, Utils::OutputFormat format)
 {
-    if (targetRunner()->state() != AbstractRemoteLinuxRunSupport::Inactive)
-        appendMessage(msg, format);
+    appendMessage(msg, format);
     d->outputParser.processOutput(msg);
 }
 
-void RemoteLinuxAnalyzeSupport::handleRemoteSetupRequested()
-{
-    QTC_ASSERT(targetRunner()->state() == AbstractRemoteLinuxRunSupport::Inactive, return);
-
-    const Core::Id runMode = runControl()->runMode();
-    if (runMode == ProjectExplorer::Constants::QML_PROFILER_RUN_MODE) {
-        showMessage(tr("Checking available ports...") + QLatin1Char('\n'),
-                    Utils::NormalMessageFormat);
-        targetRunner()->startPortsGathering();
-    } else if (runMode == ProjectExplorer::Constants::PERFPROFILER_RUN_MODE) {
-        showMessage(tr("Creating remote socket...") + QLatin1Char('\n'),
-                    Utils::NormalMessageFormat);
-        targetRunner()->createRemoteFifo();
-    }
-}
-
-void RemoteLinuxAnalyzeSupport::startExecution()
+void RemoteLinuxAnalyzeSupport::start()
 {
-    QTC_ASSERT(targetRunner()->state() == AbstractRemoteLinuxRunSupport::GatheringResources, return);
-
     const Core::Id runMode = runControl()->runMode();
     if (runMode == ProjectExplorer::Constants::QML_PROFILER_RUN_MODE) {
         d->qmlPort = targetRunner()->findPort();
         if (!d->qmlPort.isValid()) {
-            handleAdapterSetupFailed(tr("Not enough free ports on device for profiling."));
+            reportFailure(tr("Not enough free ports on device for profiling."));
             return;
         }
     } else if (runMode == ProjectExplorer::Constants::PERFPROFILER_RUN_MODE) {
         d->remoteFifo = targetRunner()->fifo();
         if (d->remoteFifo.isEmpty()) {
-            handleAdapterSetupFailed(tr("FIFO for profiling data could not be created."));
+            reportFailure(tr("FIFO for profiling data could not be created."));
             return;
         }
     }
 
-    targetRunner()->setState(AbstractRemoteLinuxRunSupport::StartingRunner);
-
     ApplicationLauncher *runner = targetRunner()->applicationLauncher();
     connect(runner, &ApplicationLauncher::remoteStderr,
             this, &RemoteLinuxAnalyzeSupport::handleRemoteErrorOutput);
@@ -190,26 +161,18 @@ void RemoteLinuxAnalyzeSupport::startExecution()
 
 void RemoteLinuxAnalyzeSupport::handleAppRunnerError(const QString &error)
 {
-    if (targetRunner()->state() == AbstractRemoteLinuxRunSupport::Running)
-        showMessage(error, Utils::ErrorMessageFormat);
-    else if (targetRunner()->state() != AbstractRemoteLinuxRunSupport::Inactive)
-        handleAdapterSetupFailed(error);
+    showMessage(error, Utils::ErrorMessageFormat);
+    reportFailure(error);
 }
 
 void RemoteLinuxAnalyzeSupport::handleAppRunnerFinished(bool success)
 {
     // reset needs to be called first to ensure that the correct state is set.
-    targetRunner()->reset();
     if (!success)
         showMessage(tr("Failure running remote process."), Utils::NormalMessageFormat);
     runControl()->notifyRemoteFinished();
 }
 
-void RemoteLinuxAnalyzeSupport::handleProfilingFinished()
-{
-    targetRunner()->setFinished();
-}
-
 void RemoteLinuxAnalyzeSupport::remoteIsRunning()
 {
     runControl()->notifyRemoteSetupDone(d->qmlPort);
@@ -222,16 +185,11 @@ AbstractRemoteLinuxRunSupport *RemoteLinuxAnalyzeSupport::targetRunner() const
 
 void RemoteLinuxAnalyzeSupport::handleRemoteOutput(const QByteArray &output)
 {
-    QTC_ASSERT(targetRunner()->state() == AbstractRemoteLinuxRunSupport::Inactive
-            || targetRunner()->state() == AbstractRemoteLinuxRunSupport::Running, return);
-
     showMessage(QString::fromUtf8(output), Utils::StdOutFormat);
 }
 
 void RemoteLinuxAnalyzeSupport::handleRemoteErrorOutput(const QByteArray &output)
 {
-    QTC_ASSERT(targetRunner()->state() != AbstractRemoteLinuxRunSupport::GatheringResources, return);
-
     showMessage(QString::fromUtf8(output), Utils::StdErrFormat);
 }
 
@@ -247,9 +205,6 @@ void RemoteLinuxAnalyzeSupport::handleAdapterSetupFailed(const QString &error)
 
 void RemoteLinuxAnalyzeSupport::handleRemoteProcessStarted()
 {
-    QTC_ASSERT(targetRunner()->state() == AbstractRemoteLinuxRunSupport::StartingRunner, return);
-
-    targetRunner()->setState(AbstractRemoteLinuxRunSupport::Running);
 }
 
 } // namespace RemoteLinux
diff --git a/src/plugins/remotelinux/remotelinuxanalyzesupport.h b/src/plugins/remotelinux/remotelinuxanalyzesupport.h
index 2cea6c380c2..f125deba914 100644
--- a/src/plugins/remotelinux/remotelinuxanalyzesupport.h
+++ b/src/plugins/remotelinux/remotelinuxanalyzesupport.h
@@ -44,7 +44,7 @@ public:
     ~RemoteLinuxAnalyzeSupport() override;
 
 private:
-    void startExecution();
+    void start() override;
     void handleAdapterSetupFailed(const QString &error);
 
     void handleRemoteSetupRequested();
@@ -55,7 +55,6 @@ private:
     void handleProgressReport(const QString &progressOutput);
 
     void handleRemoteProcessStarted();
-    void handleProfilingFinished();
 
     void remoteIsRunning();
     AbstractRemoteLinuxRunSupport *targetRunner() const;
diff --git a/src/plugins/remotelinux/remotelinuxdebugsupport.cpp b/src/plugins/remotelinux/remotelinuxdebugsupport.cpp
index 7acc63af8cc..9bcdc5b2079 100644
--- a/src/plugins/remotelinux/remotelinuxdebugsupport.cpp
+++ b/src/plugins/remotelinux/remotelinuxdebugsupport.cpp
@@ -25,10 +25,10 @@
 
 #include "remotelinuxdebugsupport.h"
 
+#include "remotelinuxcustomrunconfiguration.h"
 #include "remotelinuxrunconfiguration.h"
 
 #include <debugger/debuggerruncontrol.h>
-#include <debugger/debuggerstartparameters.h>
 
 #include <projectexplorer/buildconfiguration.h>
 #include <projectexplorer/project.h>
@@ -41,109 +41,87 @@
 #include <utils/qtcassert.h>
 #include <utils/qtcprocess.h>
 
-#include <QPointer>
-
-using namespace QSsh;
 using namespace Debugger;
 using namespace ProjectExplorer;
 using namespace Utils;
 
 namespace RemoteLinux {
-namespace Internal {
 
-class LinuxDeviceDebugSupportPrivate
+LinuxDeviceDebugSupport::LinuxDeviceDebugSupport(RunControl *runControl, QString *errorMessage)
+    : DebuggerRunTool(runControl)
 {
-public:
-    QByteArray gdbserverOutput;
-    Port gdbServerPort;
-    Port qmlPort;
-};
+    RunConfiguration *runConfig = runControl->runConfiguration();
 
-} // namespace Internal
+    QString symbolFile;
+    if (auto rlrc = qobject_cast<RemoteLinuxRunConfiguration *>(runConfig))
+        symbolFile = rlrc->localExecutableFilePath();
+    if (auto rlrc = qobject_cast<Internal::RemoteLinuxCustomRunConfiguration *>(runConfig))
+        symbolFile = rlrc->localExecutableFilePath();
+    if (symbolFile.isEmpty()) {
+        *errorMessage = tr("Cannot debug: Local executable is not set.");
+        return;
+    }
 
-using namespace Internal;
+    DebuggerStartParameters params;
+    params.startMode = AttachToRemoteServer;
+    params.closeMode = KillAndExitMonitorAtClose;
+    params.remoteSetupNeeded = false;
 
-LinuxDeviceDebugSupport::LinuxDeviceDebugSupport(RunControl *runControl,
-                                                 const Debugger::DebuggerStartParameters &sp,
-                                                 QString *errorMessage)
-    : DebuggerRunTool(runControl, sp, errorMessage),
-      d(new LinuxDeviceDebugSupportPrivate)
-{
-    connect(this, &DebuggerRunTool::requestRemoteSetup,
-            this, &LinuxDeviceDebugSupport::handleRemoteSetupRequested);
-    connect(runControl, &RunControl::finished,
-            this, &LinuxDeviceDebugSupport::handleDebuggingFinished);
+    if (isQmlDebugging()) {
+        params.qmlServer.host = device()->sshParameters().host;
+        params.qmlServer.port = Utils::Port(); // port is selected later on
+    }
+    if (isCppDebugging()) {
+        Runnable r = runnable();
+        QTC_ASSERT(r.is<StandardRunnable>(), return);
+        auto stdRunnable = r.as<StandardRunnable>();
+        params.useExtendedRemote = true;
+        params.inferior.executable = stdRunnable.executable;
+        params.inferior.commandLineArguments = stdRunnable.commandLineArguments;
+        if (isQmlDebugging()) {
+            params.inferior.commandLineArguments.prepend(' ');
+            params.inferior.commandLineArguments.prepend(
+                QmlDebug::qmlDebugTcpArguments(QmlDebug::QmlDebuggerServices));
+        }
+        params.remoteChannel = device()->sshParameters().host + ":-1";
+        params.symbolFile = symbolFile;
+    }
 
-    connect(qobject_cast<AbstractRemoteLinuxRunSupport *>(runControl->targetRunner()),
-            &AbstractRemoteLinuxRunSupport::executionStartRequested,
-            this, &LinuxDeviceDebugSupport::startExecution);
-    connect(qobject_cast<AbstractRemoteLinuxRunSupport *>(runControl->targetRunner()),
-            &AbstractRemoteLinuxRunSupport::adapterSetupFailed,
-            this, &LinuxDeviceDebugSupport::handleAdapterSetupFailed);
+    setStartParameters(params);
 }
 
 LinuxDeviceDebugSupport::~LinuxDeviceDebugSupport()
 {
-    delete d;
-}
-
-AbstractRemoteLinuxRunSupport *LinuxDeviceDebugSupport::targetRunner() const
-{
-    return qobject_cast<AbstractRemoteLinuxRunSupport *>(runControl()->targetRunner());
 }
 
-AbstractRemoteLinuxRunSupport::State LinuxDeviceDebugSupport::state() const
+void LinuxDeviceDebugSupport::prepare()
 {
-    AbstractRemoteLinuxRunSupport *runner = targetRunner();
-    return runner ? runner->state() : AbstractRemoteLinuxRunSupport::Inactive;
-}
-
-void LinuxDeviceDebugSupport::handleRemoteSetupRequested()
-{
-    QTC_ASSERT(state() == AbstractRemoteLinuxRunSupport::Inactive, return);
-
-    showMessage(tr("Checking available ports...") + QLatin1Char('\n'), LogStatus);
-    targetRunner()->startPortsGathering();
-}
-
-void LinuxDeviceDebugSupport::startExecution()
-{
-    QTC_ASSERT(state() == AbstractRemoteLinuxRunSupport::GatheringResources, return);
+    auto targetRunner = qobject_cast<AbstractRemoteLinuxRunSupport *>(runControl()->targetRunner());
 
     if (isCppDebugging()) {
-        d->gdbServerPort = targetRunner()->findPort();
-        if (!d->gdbServerPort.isValid()) {
-            handleAdapterSetupFailed(tr("Not enough free ports on device for C++ debugging."));
+        m_gdbServerPort = targetRunner->findPort();
+        if (!m_gdbServerPort.isValid()) {
+            reportFailure(tr("Not enough free ports on device for C++ debugging."));
             return;
         }
     }
     if (isQmlDebugging()) {
-        d->qmlPort = targetRunner()->findPort();
-        if (!d->qmlPort.isValid()) {
-            handleAdapterSetupFailed(tr("Not enough free ports on device for QML debugging."));
+        m_qmlPort = targetRunner->findPort();
+        if (!m_qmlPort.isValid()) {
+            reportFailure(tr("Not enough free ports on device for QML debugging."));
             return;
         }
     }
 
-    targetRunner()->setState(AbstractRemoteLinuxRunSupport::StartingRunner);
-    d->gdbserverOutput.clear();
+    runControl()->setRunnable(realRunnable());
 
-    ApplicationLauncher *launcher = targetRunner()->applicationLauncher();
-    connect(launcher, &ApplicationLauncher::remoteStderr,
-            this, &LinuxDeviceDebugSupport::handleRemoteErrorOutput);
-    connect(launcher, &ApplicationLauncher::remoteStdout,
-            this, &LinuxDeviceDebugSupport::handleRemoteOutput);
-    connect(launcher, &ApplicationLauncher::finished,
-            this, &LinuxDeviceDebugSupport::handleAppRunnerFinished);
-    connect(launcher, &ApplicationLauncher::reportProgress,
-            this, &LinuxDeviceDebugSupport::handleProgressReport);
-    connect(launcher, &ApplicationLauncher::reportError,
-            this, &LinuxDeviceDebugSupport::handleAppRunnerError);
-    if (isQmlDebugging() && !isCppDebugging())
-        connect(launcher, &ApplicationLauncher::remoteProcessStarted,
-                this, &LinuxDeviceDebugSupport::handleRemoteProcessStarted);
+    RemoteSetupResult result;
+    result.success = true;
+    result.gdbServerPort = m_gdbServerPort;
+    result.qmlServerPort = m_qmlPort;
+    setRemoteParameters(result);
 
-    launcher->start(realRunnable(), device());
+    DebuggerRunTool::prepare();
 }
 
 Runnable LinuxDeviceDebugSupport::realRunnable() const
@@ -153,7 +131,7 @@ Runnable LinuxDeviceDebugSupport::realRunnable() const
     QString command;
 
     if (isQmlDebugging())
-        args.prepend(QmlDebug::qmlDebugTcpArguments(QmlDebug::QmlDebuggerServices, d->qmlPort));
+        args.prepend(QmlDebug::qmlDebugTcpArguments(QmlDebug::QmlDebuggerServices, m_qmlPort));
 
     if (isQmlDebugging() && !isCppDebugging()) {
         command = r.executable;
@@ -163,102 +141,11 @@ Runnable LinuxDeviceDebugSupport::realRunnable() const
             command = QLatin1String("gdbserver");
         args.clear();
         args.append(QString::fromLatin1("--multi"));
-        args.append(QString::fromLatin1(":%1").arg(d->gdbServerPort.number()));
+        args.append(QString::fromLatin1(":%1").arg(m_gdbServerPort.number()));
     }
     r.executable = command;
     r.commandLineArguments = QtcProcess::joinArgs(args, OsTypeLinux);
     return r;
 }
 
-void LinuxDeviceDebugSupport::handleAppRunnerError(const QString &error)
-{
-    if (state() == AbstractRemoteLinuxRunSupport::Running) {
-        showMessage(error, AppError);
-        notifyInferiorIll();
-    } else if (state() != AbstractRemoteLinuxRunSupport::Inactive) {
-        handleAdapterSetupFailed(error);
-    }
-}
-
-void LinuxDeviceDebugSupport::handleAppRunnerFinished(bool success)
-{
-    if (state() == AbstractRemoteLinuxRunSupport::Inactive)
-        return;
-
-    if (state() == AbstractRemoteLinuxRunSupport::Running) {
-        // The QML engine does not realize on its own that the application has finished.
-        if (isQmlDebugging() && !isCppDebugging())
-            quitDebugger();
-        else if (!success)
-            notifyInferiorIll();
-
-    } else if (state() == AbstractRemoteLinuxRunSupport::StartingRunner) {
-        RemoteSetupResult result;
-        result.success = false;
-        result.reason = tr("Debugging failed.");
-        notifyEngineRemoteSetupFinished(result);
-    }
-    targetRunner()->reset();
-}
-
-void LinuxDeviceDebugSupport::handleDebuggingFinished()
-{
-    targetRunner()->setFinished();
-    targetRunner()->reset();
-}
-
-void LinuxDeviceDebugSupport::handleRemoteOutput(const QByteArray &output)
-{
-    QTC_ASSERT(state() == AbstractRemoteLinuxRunSupport::Inactive
-            || state() == AbstractRemoteLinuxRunSupport::Running, return);
-
-    showMessage(QString::fromUtf8(output), AppOutput);
-}
-
-void LinuxDeviceDebugSupport::handleRemoteErrorOutput(const QByteArray &output)
-{
-    QTC_ASSERT(state() != AbstractRemoteLinuxRunSupport::GatheringResources, return);
-
-    showMessage(QString::fromUtf8(output), AppError);
-    if (state() == AbstractRemoteLinuxRunSupport::StartingRunner && isCppDebugging()) {
-        d->gdbserverOutput += output;
-        if (d->gdbserverOutput.contains("Listening on port")) {
-            handleAdapterSetupDone();
-            d->gdbserverOutput.clear();
-        }
-    }
-}
-
-void LinuxDeviceDebugSupport::handleProgressReport(const QString &progressOutput)
-{
-    showMessage(progressOutput + QLatin1Char('\n'), LogStatus);
-}
-
-void LinuxDeviceDebugSupport::handleAdapterSetupFailed(const QString &error)
-{
-    RemoteSetupResult result;
-    result.success = false;
-    result.reason = tr("Initial setup failed: %1").arg(error);
-    notifyEngineRemoteSetupFinished(result);
-}
-
-void LinuxDeviceDebugSupport::handleAdapterSetupDone()
-{
-    targetRunner()->setState(AbstractRemoteLinuxRunSupport::Running);
-
-    RemoteSetupResult result;
-    result.success = true;
-    result.gdbServerPort = d->gdbServerPort;
-    result.qmlServerPort = d->qmlPort;
-    notifyEngineRemoteSetupFinished(result);
-}
-
-void LinuxDeviceDebugSupport::handleRemoteProcessStarted()
-{
-    QTC_ASSERT(isQmlDebugging() && !isCppDebugging(), return);
-    QTC_ASSERT(state() == AbstractRemoteLinuxRunSupport::StartingRunner, return);
-
-    handleAdapterSetupDone();
-}
-
 } // namespace RemoteLinux
diff --git a/src/plugins/remotelinux/remotelinuxdebugsupport.h b/src/plugins/remotelinux/remotelinuxdebugsupport.h
index 17a35be297c..7473f05593b 100644
--- a/src/plugins/remotelinux/remotelinuxdebugsupport.h
+++ b/src/plugins/remotelinux/remotelinuxdebugsupport.h
@@ -31,15 +31,12 @@
 
 namespace RemoteLinux {
 
-namespace Internal { class LinuxDeviceDebugSupportPrivate; }
-
 class REMOTELINUX_EXPORT LinuxDeviceDebugSupport : public Debugger::DebuggerRunTool
 {
     Q_OBJECT
 
 public:
     LinuxDeviceDebugSupport(ProjectExplorer::RunControl *runControl,
-                            const Debugger::DebuggerStartParameters &sp,
                             QString *errorMessage = nullptr);
     ~LinuxDeviceDebugSupport() override;
 
@@ -47,24 +44,10 @@ protected:
     virtual ProjectExplorer::Runnable realRunnable() const;
 
 private:
-    void startExecution();
-    void handleAdapterSetupFailed(const QString &error);
-
-    void handleRemoteSetupRequested();
-    void handleAppRunnerError(const QString &error);
-    void handleRemoteOutput(const QByteArray &output);
-    void handleRemoteErrorOutput(const QByteArray &output);
-    void handleAppRunnerFinished(bool success);
-    void handleProgressReport(const QString &progressOutput);
-
-    void handleRemoteProcessStarted();
-    void handleAdapterSetupDone();
-    void handleDebuggingFinished();
-
-    AbstractRemoteLinuxRunSupport *targetRunner() const;
-    AbstractRemoteLinuxRunSupport::State state() const;
+    void prepare() override;
 
-    Internal::LinuxDeviceDebugSupportPrivate * const d;
+    Utils::Port m_gdbServerPort;
+    Utils::Port m_qmlPort;
 };
 
 } // namespace RemoteLinux
diff --git a/src/plugins/remotelinux/remotelinuxruncontrolfactory.cpp b/src/plugins/remotelinux/remotelinuxruncontrolfactory.cpp
index af07e1828f4..978bb9aa908 100644
--- a/src/plugins/remotelinux/remotelinuxruncontrolfactory.cpp
+++ b/src/plugins/remotelinux/remotelinuxruncontrolfactory.cpp
@@ -41,7 +41,6 @@
 #include <projectexplorer/runnables.h>
 #include <projectexplorer/target.h>
 
-#include <qmldebug/qmldebugcommandlinearguments.h>
 
 #include <utils/portlist.h>
 #include <utils/qtcassert.h>
@@ -68,7 +67,6 @@ bool RemoteLinuxRunControlFactory::canRun(RunConfiguration *runConfiguration, Co
     }
 
     const Core::Id id = runConfiguration->id();
-    QTC_ASSERT(runConfiguration->extraAspect<DebuggerRunConfigurationAspect>(), return false);
     return runConfiguration->isEnabled()
             && (id == RemoteLinuxCustomRunConfiguration::runConfigId()
                 || id.name().startsWith(RemoteLinuxRunConfiguration::IdPrefix));
@@ -81,65 +79,15 @@ RunControl *RemoteLinuxRunControlFactory::create(RunConfiguration *runConfig, Co
 
     if (mode == ProjectExplorer::Constants::NORMAL_RUN_MODE) {
         auto runControl = new RunControl(runConfig, mode);
-        (void) new SimpleTargetRunner(runControl);
+        (void) new AbstractRemoteLinuxRunSupport(runControl);
         return runControl;
     }
 
-    const auto rcRunnable = runConfig->runnable();
-    QTC_ASSERT(rcRunnable.is<StandardRunnable>(), return 0);
-    const auto stdRunnable = rcRunnable.as<StandardRunnable>();
-
     if (mode == ProjectExplorer::Constants::DEBUG_RUN_MODE
             || mode == ProjectExplorer::Constants::DEBUG_RUN_MODE_WITH_BREAK_ON_MAIN) {
-        IDevice::ConstPtr dev = DeviceKitInformation::device(runConfig->target()->kit());
-        if (!dev) {
-            *errorMessage = tr("Cannot debug: Kit has no device.");
-            return 0;
-        }
-
-        auto aspect = runConfig->extraAspect<DebuggerRunConfigurationAspect>();
-        QTC_ASSERT(aspect, return 0);
-
-        int portsUsed = aspect->portsUsedByDebugger();
-        if (portsUsed > dev->freePorts().count()) {
-            *errorMessage = tr("Cannot debug: Not enough free ports available.");
-            return 0;
-        }
-
-        QString symbolFile;
-        if (auto rlrc = qobject_cast<RemoteLinuxRunConfiguration *>(runConfig))
-            symbolFile = rlrc->localExecutableFilePath();
-        if (auto rlrc = qobject_cast<RemoteLinuxCustomRunConfiguration *>(runConfig))
-            symbolFile = rlrc->localExecutableFilePath();
-        if (symbolFile.isEmpty()) {
-            *errorMessage = tr("Cannot debug: Local executable is not set.");
-            return 0;
-        }
-
-        DebuggerStartParameters params;
-        params.startMode = AttachToRemoteServer;
-        params.closeMode = KillAndExitMonitorAtClose;
-        params.remoteSetupNeeded = true;
-
-        if (aspect->useQmlDebugger()) {
-            params.qmlServer.host = dev->sshParameters().host;
-            params.qmlServer.port = Utils::Port(); // port is selected later on
-        }
-        if (aspect->useCppDebugger()) {
-            params.useExtendedRemote = true;
-            params.inferior.executable = stdRunnable.executable;
-            params.inferior.commandLineArguments = stdRunnable.commandLineArguments;
-            if (aspect->useQmlDebugger()) {
-                params.inferior.commandLineArguments.prepend(QLatin1Char(' '));
-                params.inferior.commandLineArguments.prepend(QmlDebug::qmlDebugTcpArguments(QmlDebug::QmlDebuggerServices));
-            }
-            params.remoteChannel = dev->sshParameters().host + QLatin1String(":-1");
-            params.symbolFile = symbolFile;
-        }
-
         auto runControl = new RunControl(runConfig, mode);
         (void) new AbstractRemoteLinuxRunSupport(runControl);
-        (void) new LinuxDeviceDebugSupport(runControl, params, errorMessage);
+        (void) new LinuxDeviceDebugSupport(runControl, errorMessage);
         return runControl;
     }
 
diff --git a/src/plugins/valgrind/valgrindengine.cpp b/src/plugins/valgrind/valgrindengine.cpp
index 090c02e6b5a..a10e709b3aa 100644
--- a/src/plugins/valgrind/valgrindengine.cpp
+++ b/src/plugins/valgrind/valgrindengine.cpp
@@ -102,7 +102,7 @@ void ValgrindToolRunner::start()
         return;
     }
 
-    reportStarted();
+    reportSuccess();
 }
 
 void ValgrindToolRunner::stop()
@@ -160,7 +160,7 @@ void ValgrindToolRunner::runnerFinished()
     disconnect(runner(), &ValgrindRunner::finished,
                this, &ValgrindToolRunner::runnerFinished);
 
-    reportStopped();
+    reportSuccess();
 }
 
 void ValgrindToolRunner::receiveProcessOutput(const QString &output, OutputFormat format)