Doc: Add Qt Design Studio Manual sources

To build the manual, switch to qtcreator\doc\qtdesignstudiodoc,
run qmake, and then "make docs".

The example documentation does not get built with this change.
We need to decide whether to move the examples or fetch their
docs from the other repository.

Task-number: QDS-1487
Change-Id: Ic0a8c15b226eba8ac90686953568f3deaa000fb0
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>

1 files changed, 254 insertions, 0 deletions

diff --git a/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-pie.qdoc b/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-pie.qdoc
new file mode 100644
index 0000000000..e09e6038f2
--- /dev/null
+++ b/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-pie.qdoc
@@ -0,0 +1,254 @@
+/****************************************************************************
+**
+** Copyright (C) 2019 The Qt Company Ltd.
+** Contact: https://www.qt.io/licensing/
+**
+** This file is part of the Qt Design Studio documentation.
+**
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and The Qt Company. For licensing terms
+** and conditions see https://www.qt.io/terms-conditions. For further
+** information use the contact form at https://www.qt.io/contact-us.
+**
+** GNU Free Documentation License Usage
+** Alternatively, this file may be used under the terms of the GNU Free
+** Documentation License version 1.3 as published by the Free Software
+** Foundation and appearing in the file included in the packaging of
+** this file. Please review the following information to ensure
+** the GNU Free Documentation License version 1.3 requirements
+** will be met: https://www.gnu.org/licenses/fdl-1.3.html.
+**
+****************************************************************************/
+
+/*!
+    \qmltype Pie
+    \inqmlmodule QtQuick.Studio.Components
+    \since QtQuick.Studio.Components 1.0
+    \inherits ShapePath
+    \ingroup qtquickstudio-components
+
+    \brief A pie.
+
+    The Pie type is used to create a pie slice, a pie that is missing slices,
+    or just the pie rind (similar to an \l Arc), depending on the \l begin and
+    \l end property values and the \l hideLine value.
+
+    The filling of the pie is painted using either a solid fill color, specified
+    using the \l fillColor property, or a gradient, defined using one of the
+    \l ShapeGradient subtypes and set using the \l gradient property.
+    If both a color and a gradient are specified, the gradient is used.
+
+    The \l strokeColor, \l strokeWidth, and \l strokeStyle, properties specify
+    the appearance of the pie outline. The \l dashPattern and \l dashOffset
+    properties specify the appearance of dashed lines.
+
+    The \l capStyle property specifies whether line ends are square or
+    rounded.
+
+    Because a pie has curved edges, it may be appropriate to set the
+    \l antialiasing property to improve its appearance.
+
+    \section2 Example Usage
+
+    You can use the Pie component in \QDS to create different kinds of pies.
+
+    \image studio-pie.png
+
+    The QML code looks as follows:
+
+    \code
+        PieItem {
+        id: pieSlice
+        antialiasing: true
+        strokeColor: "gray"
+        fillColor: "light gray"
+    }
+
+    PieItem {
+        id: pie
+        end: 300
+        fillColor: "#d3d3d3"
+        strokeColor: "#808080"
+        antialiasing: true
+    }
+
+    PieItem {
+        id: pieRind
+        strokeWidth: 4
+        capStyle: 32
+        hideLine: true
+        end: 300
+        strokeColor: "#808080"
+        antialiasing: true
+    }
+    \endcode
+*/
+
+/*!
+    \qmlproperty ShapePath Pie::capStyle
+
+    The cap style of the line.
+
+    \value ShapePath.FlatCap
+           A square line end that does not cover the end point of the line.
+    \value ShapePath.SquareCap
+           A square line end that covers the end point and extends beyond it
+           by half the line width. This is the default value.
+    \value ShapePath.RoundCap
+           A rounded line end.
+
+    \sa Qt::PenCapStyle
+*/
+
+/*!
+    \qmlproperty ShapePath Pie::dashOffset
+
+    The starting point of the dash pattern for the line.
+
+    The offset is measured in terms of the units used to specify the dash
+    pattern. For example, a pattern where each stroke is four units long,
+    followed by a gap of two units, will begin with the stroke when drawn
+    as a line. However, if the dash offset is set to 4.0, any line drawn
+    will begin with the gap. Values of the offset up to 4.0 will cause part
+    of the stroke to be drawn first, and values of the offset between 4.0 and
+    6.0 will cause the line to begin with part of the gap.
+
+    The default value is 0.
+
+    \sa QPen::setDashOffset()
+*/
+
+/*!
+    \qmlproperty ShapePath Pie::dashPattern
+
+    The dash pattern of the line specified as the dashes and the gaps between
+    them.
+
+    The dash pattern is specified in units of the pen's width. That is, a dash
+    with the length 5 and width 10 is 50 pixels long.
+
+    Each dash is also subject to cap styles, and therefore a dash of 1 with
+    square cap set will extend 0.5 pixels out in each direction resulting in
+    a total width of 2.
+
+    The default \l capStyle is \c {ShapePath.SquareCap}, meaning that a square
+    line end covers the end point and extends beyond it by half the line width.
+
+    The default value is (4, 2), meaning a dash of 4 * \l strokeWidth pixels
+    followed by a space of 2 * \l strokeWidth pixels.
+
+    \sa QPen::setDashPattern()
+*/
+
+/*!
+    \qmlproperty ShapePath Pie::fillColor
+
+    The pie fill color.
+
+    If \l hideLine is \c false, a pie slice is drawn using the values of the
+    \l begin and \l end properties and filled with this color.
+
+    If \l hideLine is \c true, just the pie rind is drawn and the area between
+    the \l begin and \l end points is filled.
+
+    A gradient for the fill can be specified by using \l gradient. If both a
+    color and a gradient are specified, the gradient is used.
+
+    When set to \c transparent, no filling occurs.
+
+    The default value is \c white.
+*/
+
+/*!
+    \qmlproperty ShapePath Pie::gradient
+
+    The gradient of the pie fill color.
+
+    By default, no gradient is enabled and the value is null. In this case, the
+    fill uses a solid color based on the value of \l fillColor.
+
+    When set, \l fillColor is ignored and filling is done using one of the
+    \l ShapeGradient subtypes.
+
+    \note The \l Gradient type cannot be used here. Rather, prefer using one of
+    the advanced subtypes, like \l LinearGradient.
+*/
+
+/*!
+    \qmlproperty ShapePath Pie::strokeColor
+
+    The color of the line.
+
+    When set to \c transparent, no line is drawn.
+
+    The default value is \c white.
+
+    \sa QColor
+*/
+
+/*!
+    \qmlproperty ShapePath Pie::strokeStyle
+
+    The style of the border line.
+
+    \value ShapePath.SolidLine
+           A solid line. This is the default value.
+    \value ShapePath.DashLine
+           Dashes separated by a few pixels.
+           The \l dashPattern property specifies the dash pattern.
+
+    \sa Qt::PenStyle
+*/
+
+/*!
+    \qmlproperty ShapePath Pie::strokeWidth
+
+    The width of the line.
+
+    When set to a negative value, no line is drawn.
+
+    The default value is 1.
+*/
+
+/*!
+    \qmlproperty real Pie::begin
+
+    The position in degrees where the pie begins.
+
+    The default value is 0.
+
+    To create a circle, set the value of this property to 0 and the value of the
+    \l end property to 360.
+*/
+
+/*!
+    \qmlproperty real Pie::end
+
+    The position in degrees where the pie ends.
+
+    To create a circle, set the value of this property to 360 and the value of
+    the \l begin property to 0.
+*/
+
+/*!
+    \qmlproperty real Pie::alpha
+
+    The area between \l begin and \l end.
+*/
+
+/*!
+    \qmlproperty bool Pie::antialiasing
+
+    Whether the pie should be antialiased.
+
+    Antialiasing might require more memory and slow down drawing the type.
+*/
+
+/*!
+    \qmlproperty bool Pie::hideLine
+
+    Whether to draw a pie slice or just the pie rind (similar to an \l Arc).
+*/