PCRE2: remove PCRE1 code

Change-Id: I83cf7c22fe95fb6384b751d09867633a72f093db
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

1 files changed, 0 insertions, 724 deletions

diff --git a/src/3rdparty/pcre/sljit/sljitConfigInternal.h b/src/3rdparty/pcre/sljit/sljitConfigInternal.h
deleted file mode 100644
index 9275b14992..0000000000
--- a/src/3rdparty/pcre/sljit/sljitConfigInternal.h
+++ /dev/null
@@ -1,724 +0,0 @@
-/*
- *    Stack-less Just-In-Time compiler
- *
- *    Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification, are
- * permitted provided that the following conditions are met:
- *
- *   1. Redistributions of source code must retain the above copyright notice, this list of
- *      conditions and the following disclaimer.
- *
- *   2. Redistributions in binary form must reproduce the above copyright notice, this list
- *      of conditions and the following disclaimer in the documentation and/or other materials
- *      provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _SLJIT_CONFIG_INTERNAL_H_
-#define _SLJIT_CONFIG_INTERNAL_H_
-
-/*
-   SLJIT defines the following architecture dependent types and macros:
-
-   Types:
-     sljit_s8, sljit_u8   : signed and unsigned 8 bit integer type
-     sljit_s16, sljit_u16 : signed and unsigned 16 bit integer type
-     sljit_s32, sljit_u32 : signed and unsigned 32 bit integer type
-     sljit_sw, sljit_uw   : signed and unsigned machine word, enough to store a pointer
-     sljit_p              : unsgined pointer value (usually the same as sljit_uw, but
-                            some 64 bit ABIs may use 32 bit pointers)
-     sljit_f32            : 32 bit single precision floating point value
-     sljit_f64            : 64 bit double precision floating point value
-
-   Macros for feature detection (boolean):
-     SLJIT_32BIT_ARCHITECTURE : 32 bit architecture
-     SLJIT_64BIT_ARCHITECTURE : 64 bit architecture
-     SLJIT_LITTLE_ENDIAN : little endian architecture
-     SLJIT_BIG_ENDIAN : big endian architecture
-     SLJIT_UNALIGNED : allows unaligned memory accesses for non-fpu operations (only!)
-     SLJIT_INDIRECT_CALL : see SLJIT_FUNC_OFFSET() for more information
-
-   Constants:
-     SLJIT_NUMBER_OF_REGISTERS : number of available registers
-     SLJIT_NUMBER_OF_SCRATCH_REGISTERS : number of available scratch registers
-     SLJIT_NUMBER_OF_SAVED_REGISTERS : number of available saved registers
-     SLJIT_NUMBER_OF_FLOAT_REGISTERS : number of available floating point registers
-     SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS : number of available floating point scratch registers
-     SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS : number of available floating point saved registers
-     SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_sw/sljit_uw array by index
-     SLJIT_F32_SHIFT : the shift required to apply when accessing
-                       a single precision floating point array by index
-     SLJIT_F64_SHIFT : the shift required to apply when accessing
-                       a double precision floating point array by index
-     SLJIT_LOCALS_OFFSET : local space starting offset (SLJIT_SP + SLJIT_LOCALS_OFFSET)
-     SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address
-
-   Other macros:
-     SLJIT_CALL : C calling convention define for both calling JIT form C and C callbacks for JIT
-     SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper)
-*/
-
-/*****************/
-/* Sanity check. */
-/*****************/
-
-#if !((defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
-	|| (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
-	|| (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
-	|| (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
-	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
-	|| (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
-	|| (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
-	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
-	|| (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \
-	|| (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \
-	|| (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \
-	|| (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \
-	|| (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \
-	|| (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED))
-#error "An architecture must be selected"
-#endif
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
-	+ (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
-	+ (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
-	+ (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
-	+ (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
-	+ (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
-	+ (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
-	+ (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
-	+ (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \
-	+ (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \
-	+ (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \
-	+ (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \
-	+ (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \
-	+ (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) >= 2
-#error "Multiple architectures are selected"
-#endif
-
-/********************************************************/
-/* Automatic CPU detection (requires compiler support). */
-/********************************************************/
-
-#if (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO)
-
-#ifndef _WIN32
-
-#if defined(__i386__) || defined(__i386)
-#define SLJIT_CONFIG_X86_32 1
-#elif defined(__x86_64__)
-#define SLJIT_CONFIG_X86_64 1
-#elif defined(__arm__) || defined(__ARM__)
-#ifdef __thumb2__
-#define SLJIT_CONFIG_ARM_THUMB2 1
-#elif defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7R__)
-#define SLJIT_CONFIG_ARM_V7 1
-#else
-#define SLJIT_CONFIG_ARM_V5 1
-#endif
-#elif defined (__aarch64__)
-#define SLJIT_CONFIG_ARM_64 1
-#elif defined(__ppc64__) || defined(__powerpc64__) || defined(_ARCH_PPC64) || (defined(_POWER) && defined(__64BIT__))
-#define SLJIT_CONFIG_PPC_64 1
-#elif defined(__ppc__) || defined(__powerpc__) || defined(_ARCH_PPC) || defined(_ARCH_PWR) || defined(_ARCH_PWR2) || defined(_POWER)
-#define SLJIT_CONFIG_PPC_32 1
-#elif defined(__mips__) && !defined(_LP64)
-#define SLJIT_CONFIG_MIPS_32 1
-#elif defined(__mips64)
-#define SLJIT_CONFIG_MIPS_64 1
-#elif defined(__sparc__) || defined(__sparc)
-#define SLJIT_CONFIG_SPARC_32 1
-#elif defined(__tilegx__)
-#define SLJIT_CONFIG_TILEGX 1
-#else
-/* Unsupported architecture */
-#define SLJIT_CONFIG_UNSUPPORTED 1
-#endif
-
-#else /* !_WIN32 */
-
-#if defined(_M_X64) || defined(__x86_64__)
-#define SLJIT_CONFIG_X86_64 1
-#elif defined(_ARM_)
-#define SLJIT_CONFIG_ARM_V5 1
-#else
-#define SLJIT_CONFIG_X86_32 1
-#endif
-
-#endif /* !WIN32 */
-#endif /* SLJIT_CONFIG_AUTO */
-
-#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
-#undef SLJIT_EXECUTABLE_ALLOCATOR
-#endif
-
-/******************************/
-/* CPU family type detection. */
-/******************************/
-
-#if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
-	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
-#define SLJIT_CONFIG_ARM_32 1
-#endif
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
-#define SLJIT_CONFIG_X86 1
-#elif (defined SLJIT_CONFIG_ARM_32 && SLJIT_CONFIG_ARM_32) || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
-#define SLJIT_CONFIG_ARM 1
-#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-#define SLJIT_CONFIG_PPC 1
-#elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
-#define SLJIT_CONFIG_MIPS 1
-#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) || (defined SLJIT_CONFIG_SPARC_64 && SLJIT_CONFIG_SPARC_64)
-#define SLJIT_CONFIG_SPARC 1
-#endif
-
-/**********************************/
-/* External function definitions. */
-/**********************************/
-
-#if !(defined SLJIT_STD_MACROS_DEFINED && SLJIT_STD_MACROS_DEFINED)
-
-/* These libraries are needed for the macros below. */
-#include <stdlib.h>
-#include <string.h>
-
-#endif /* SLJIT_STD_MACROS_DEFINED */
-
-/* General macros:
-   Note: SLJIT is designed to be independent from them as possible.
-
-   In release mode (SLJIT_DEBUG is not defined) only the following
-   external functions are needed:
-*/
-
-#ifndef SLJIT_MALLOC
-#define SLJIT_MALLOC(size, allocator_data) malloc(size)
-#endif
-
-#ifndef SLJIT_FREE
-#define SLJIT_FREE(ptr, allocator_data) free(ptr)
-#endif
-
-#ifndef SLJIT_MEMMOVE
-#define SLJIT_MEMMOVE(dest, src, len) memmove(dest, src, len)
-#endif
-
-#ifndef SLJIT_ZEROMEM
-#define SLJIT_ZEROMEM(dest, len) memset(dest, 0, len)
-#endif
-
-/***************************/
-/* Compiler helper macros. */
-/***************************/
-
-#if !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY)
-
-#if defined(__GNUC__) && (__GNUC__ >= 3)
-#define SLJIT_LIKELY(x)		__builtin_expect((x), 1)
-#define SLJIT_UNLIKELY(x)	__builtin_expect((x), 0)
-#else
-#define SLJIT_LIKELY(x)		(x)
-#define SLJIT_UNLIKELY(x)	(x)
-#endif
-
-#endif /* !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) */
-
-#ifndef SLJIT_INLINE
-/* Inline functions. Some old compilers do not support them. */
-#if defined(__SUNPRO_C) && __SUNPRO_C <= 0x510
-#define SLJIT_INLINE
-#else
-#define SLJIT_INLINE __inline
-#endif
-#endif /* !SLJIT_INLINE */
-
-#ifndef SLJIT_NOINLINE
-/* Not inline functions. */
-#if defined(__GNUC__)
-#define SLJIT_NOINLINE __attribute__ ((noinline))
-#else
-#define SLJIT_NOINLINE
-#endif
-#endif /* !SLJIT_INLINE */
-
-#ifndef SLJIT_UNUSED_ARG
-/* Unused arguments. */
-#define SLJIT_UNUSED_ARG(arg) (void)arg
-#endif
-
-/*********************************/
-/* Type of public API functions. */
-/*********************************/
-
-#if (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC)
-/* Static ABI functions. For all-in-one programs. */
-
-#if defined(__GNUC__)
-/* Disable unused warnings in gcc. */
-#define SLJIT_API_FUNC_ATTRIBUTE static __attribute__((unused))
-#else
-#define SLJIT_API_FUNC_ATTRIBUTE static
-#endif
-
-#else
-#define SLJIT_API_FUNC_ATTRIBUTE
-#endif /* (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) */
-
-/****************************/
-/* Instruction cache flush. */
-/****************************/
-
-#if (!defined SLJIT_CACHE_FLUSH && defined __has_builtin)
-#if __has_builtin(__builtin___clear_cache)
-
-#define SLJIT_CACHE_FLUSH(from, to) \
-	__builtin___clear_cache((char*)from, (char*)to)
-
-#endif /* __has_builtin(__builtin___clear_cache) */
-#endif /* (!defined SLJIT_CACHE_FLUSH && defined __has_builtin) */
-
-#ifndef SLJIT_CACHE_FLUSH
-
-#if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86)
-
-/* Not required to implement on archs with unified caches. */
-#define SLJIT_CACHE_FLUSH(from, to)
-
-#elif defined __APPLE__
-
-/* Supported by all macs since Mac OS 10.5.
-   However, it does not work on non-jailbroken iOS devices,
-   although the compilation is successful. */
-
-#define SLJIT_CACHE_FLUSH(from, to) \
-	sys_icache_invalidate((char*)(from), (char*)(to) - (char*)(from))
-
-#elif (defined(__GNUC__) && (__GNUC__ >= 5 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)))
-
-#define SLJIT_CACHE_FLUSH(from, to) \
-	__builtin___clear_cache((char*)from, (char*)to)
-
-#elif defined __ANDROID__
-
-/* Android lacks __clear_cache; instead, cacheflush should be used. */
-
-#define SLJIT_CACHE_FLUSH(from, to) \
-    cacheflush((long)(from), (long)(to), 0)
-
-#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC)
-
-/* The __clear_cache() implementation of GCC is a dummy function on PowerPC. */
-#define SLJIT_CACHE_FLUSH(from, to) \
-	ppc_cache_flush((from), (to))
-#define SLJIT_CACHE_FLUSH_OWN_IMPL 1
-
-#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-
-/* The __clear_cache() implementation of GCC is a dummy function on Sparc. */
-#define SLJIT_CACHE_FLUSH(from, to) \
-	sparc_cache_flush((from), (to))
-#define SLJIT_CACHE_FLUSH_OWN_IMPL 1
-
-#else
-
-/* Calls __ARM_NR_cacheflush on ARM-Linux. */
-#define SLJIT_CACHE_FLUSH(from, to) \
-	__clear_cache((char*)(from), (char*)(to))
-
-#endif
-
-#endif /* !SLJIT_CACHE_FLUSH */
-
-/******************************************************/
-/*    Integer and floating point type definitions.    */
-/******************************************************/
-
-/* 8 bit byte type. */
-typedef unsigned char sljit_u8;
-typedef signed char sljit_s8;
-
-/* 16 bit half-word type. */
-typedef unsigned short int sljit_u16;
-typedef signed short int sljit_s16;
-
-/* 32 bit integer type. */
-typedef unsigned int sljit_u32;
-typedef signed int sljit_s32;
-
-/* Machine word type. Enough for storing a pointer.
-     32 bit for 32 bit machines.
-     64 bit for 64 bit machines. */
-#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
-/* Just to have something. */
-#define SLJIT_WORD_SHIFT 0
-typedef unsigned long int sljit_uw;
-typedef long int sljit_sw;
-#elif !(defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
-	&& !(defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
-	&& !(defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
-	&& !(defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \
-	&& !(defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX)
-#define SLJIT_32BIT_ARCHITECTURE 1
-#define SLJIT_WORD_SHIFT 2
-typedef unsigned int sljit_uw;
-typedef int sljit_sw;
-#else
-#define SLJIT_64BIT_ARCHITECTURE 1
-#define SLJIT_WORD_SHIFT 3
-#ifdef _WIN32
-typedef unsigned __int64 sljit_uw;
-typedef __int64 sljit_sw;
-#else
-typedef unsigned long int sljit_uw;
-typedef long int sljit_sw;
-#endif
-#endif
-
-typedef sljit_uw sljit_p;
-
-/* Floating point types. */
-typedef float sljit_f32;
-typedef double sljit_f64;
-
-/* Shift for pointer sized data. */
-#define SLJIT_POINTER_SHIFT SLJIT_WORD_SHIFT
-
-/* Shift for double precision sized data. */
-#define SLJIT_F32_SHIFT 2
-#define SLJIT_F64_SHIFT 3
-
-#ifndef SLJIT_W
-
-/* Defining long constants. */
-#if (defined SLJIT_64BIT_ARCHITECTURE && SLJIT_64BIT_ARCHITECTURE)
-#define SLJIT_W(w)	(w##ll)
-#else
-#define SLJIT_W(w)	(w)
-#endif
-
-#endif /* !SLJIT_W */
-
-/*************************/
-/* Endianness detection. */
-/*************************/
-
-#if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN)
-
-/* These macros are mostly useful for the applications. */
-#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
-	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-
-#ifdef __LITTLE_ENDIAN__
-#define SLJIT_LITTLE_ENDIAN 1
-#else
-#define SLJIT_BIG_ENDIAN 1
-#endif
-
-#elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \
-	|| (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
-
-#ifdef __MIPSEL__
-#define SLJIT_LITTLE_ENDIAN 1
-#else
-#define SLJIT_BIG_ENDIAN 1
-#endif
-
-#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-
-#define SLJIT_BIG_ENDIAN 1
-
-#else
-#define SLJIT_LITTLE_ENDIAN 1
-#endif
-
-#endif /* !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) */
-
-/* Sanity check. */
-#if (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && (defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN)
-#error "Exactly one endianness must be selected"
-#endif
-
-#if !(defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && !(defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN)
-#error "Exactly one endianness must be selected"
-#endif
-
-#ifndef SLJIT_UNALIGNED
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
-	|| (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
-	|| (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
-	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
-	|| (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
-	|| (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
-	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-#define SLJIT_UNALIGNED 1
-#endif
-
-#endif /* !SLJIT_UNALIGNED */
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-/* Auto detect SSE2 support using CPUID.
-   On 64 bit x86 cpus, sse2 must be present. */
-#define SLJIT_DETECT_SSE2 1
-#endif
-
-/*****************************************************************************************/
-/* Calling convention of functions generated by SLJIT or called from the generated code. */
-/*****************************************************************************************/
-
-#ifndef SLJIT_CALL
-
-#if (defined SLJIT_USE_CDECL_CALLING_CONVENTION && SLJIT_USE_CDECL_CALLING_CONVENTION)
-
-/* Force cdecl. */
-#define SLJIT_CALL
-
-#elif (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-
-#if defined(__GNUC__) && !defined(__APPLE__)
-
-#define SLJIT_CALL __attribute__ ((fastcall))
-#define SLJIT_X86_32_FASTCALL 1
-
-#elif defined(_MSC_VER)
-
-#define SLJIT_CALL __fastcall
-#define SLJIT_X86_32_FASTCALL 1
-
-#elif defined(__BORLANDC__)
-
-#define SLJIT_CALL __msfastcall
-#define SLJIT_X86_32_FASTCALL 1
-
-#else /* Unknown compiler. */
-
-/* The cdecl attribute is the default. */
-#define SLJIT_CALL
-
-#endif
-
-#else /* Non x86-32 architectures. */
-
-#define SLJIT_CALL
-
-#endif /* SLJIT_CONFIG_X86_32 */
-
-#endif /* !SLJIT_CALL */
-
-#ifndef SLJIT_INDIRECT_CALL
-#if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN)) \
-	|| ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX)
-/* It seems certain ppc compilers use an indirect addressing for functions
-   which makes things complicated. */
-#define SLJIT_INDIRECT_CALL 1
-#endif
-#endif /* SLJIT_INDIRECT_CALL */
-
-/* The offset which needs to be substracted from the return address to
-determine the next executed instruction after return. */
-#ifndef SLJIT_RETURN_ADDRESS_OFFSET
-#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-#define SLJIT_RETURN_ADDRESS_OFFSET 8
-#else
-#define SLJIT_RETURN_ADDRESS_OFFSET 0
-#endif
-#endif /* SLJIT_RETURN_ADDRESS_OFFSET */
-
-/***************************************************/
-/* Functions of the built-in executable allocator. */
-/***************************************************/
-
-#if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR)
-SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size);
-SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr);
-SLJIT_API_FUNC_ATTRIBUTE void sljit_free_unused_memory_exec(void);
-#define SLJIT_MALLOC_EXEC(size) sljit_malloc_exec(size)
-#define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr)
-#endif
-
-/**********************************************/
-/* Registers and locals offset determination. */
-/**********************************************/
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-
-#define SLJIT_NUMBER_OF_REGISTERS 10
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 7
-#if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL)
-#define SLJIT_LOCALS_OFFSET_BASE ((2 + 4) * sizeof(sljit_sw))
-#else
-/* Maximum 3 arguments are passed on the stack, +1 for double alignment. */
-#define SLJIT_LOCALS_OFFSET_BASE ((3 + 1 + 4) * sizeof(sljit_sw))
-#endif /* SLJIT_X86_32_FASTCALL */
-
-#elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
-
-#ifndef _WIN64
-#define SLJIT_NUMBER_OF_REGISTERS 12
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 6
-#define SLJIT_LOCALS_OFFSET_BASE (sizeof(sljit_sw))
-#else
-#define SLJIT_NUMBER_OF_REGISTERS 12
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
-#define SLJIT_LOCALS_OFFSET_BASE ((4 + 2) * sizeof(sljit_sw))
-#endif /* _WIN64 */
-
-#elif (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7)
-
-#define SLJIT_NUMBER_OF_REGISTERS 11
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
-#define SLJIT_LOCALS_OFFSET_BASE 0
-
-#elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
-
-#define SLJIT_NUMBER_OF_REGISTERS 11
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 7
-#define SLJIT_LOCALS_OFFSET_BASE 0
-
-#elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
-
-#define SLJIT_NUMBER_OF_REGISTERS 25
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 10
-#define SLJIT_LOCALS_OFFSET_BASE (2 * sizeof(sljit_sw))
-
-#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC)
-
-#define SLJIT_NUMBER_OF_REGISTERS 22
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 17
-#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) || (defined _AIX)
-#define SLJIT_LOCALS_OFFSET_BASE ((6 + 8) * sizeof(sljit_sw))
-#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
-/* Add +1 for double alignment. */
-#define SLJIT_LOCALS_OFFSET_BASE ((3 + 1) * sizeof(sljit_sw))
-#else
-#define SLJIT_LOCALS_OFFSET_BASE (3 * sizeof(sljit_sw))
-#endif /* SLJIT_CONFIG_PPC_64 || _AIX */
-
-#elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS)
-
-#define SLJIT_NUMBER_OF_REGISTERS 17
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
-#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
-#define SLJIT_LOCALS_OFFSET_BASE (4 * sizeof(sljit_sw))
-#else
-#define SLJIT_LOCALS_OFFSET_BASE 0
-#endif
-
-#elif (defined SLJIT_CONFIG_SPARC && SLJIT_CONFIG_SPARC)
-
-#define SLJIT_NUMBER_OF_REGISTERS 18
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 14
-#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-/* Add +1 for double alignment. */
-#define SLJIT_LOCALS_OFFSET_BASE ((23 + 1) * sizeof(sljit_sw))
-#endif
-
-#elif (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX)
-
-#define SLJIT_NUMBER_OF_REGISTERS 10
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 5
-#define SLJIT_LOCALS_OFFSET_BASE 0
-
-#elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
-
-#define SLJIT_NUMBER_OF_REGISTERS 0
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 0
-#define SLJIT_LOCALS_OFFSET_BASE 0
-
-#endif
-
-#define SLJIT_LOCALS_OFFSET (SLJIT_LOCALS_OFFSET_BASE)
-
-#define SLJIT_NUMBER_OF_SCRATCH_REGISTERS \
-	(SLJIT_NUMBER_OF_REGISTERS - SLJIT_NUMBER_OF_SAVED_REGISTERS)
-
-#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 6
-#if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && (defined _WIN64)
-#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 1
-#else
-#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0
-#endif
-
-#define SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS \
-	(SLJIT_NUMBER_OF_FLOAT_REGISTERS - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS)
-
-/*************************************/
-/* Debug and verbose related macros. */
-/*************************************/
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
-#include <stdio.h>
-#endif
-
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-
-#if !defined(SLJIT_ASSERT) || !defined(SLJIT_ASSERT_STOP)
-
-/* SLJIT_HALT_PROCESS must halt the process. */
-#ifndef SLJIT_HALT_PROCESS
-#include <stdlib.h>
-
-#define SLJIT_HALT_PROCESS() \
-	abort();
-#endif /* !SLJIT_HALT_PROCESS */
-
-#include <stdio.h>
-
-#endif /* !SLJIT_ASSERT || !SLJIT_ASSERT_STOP */
-
-/* Feel free to redefine these two macros. */
-#ifndef SLJIT_ASSERT
-
-#define SLJIT_ASSERT(x) \
-	do { \
-		if (SLJIT_UNLIKELY(!(x))) { \
-			printf("Assertion failed at " __FILE__ ":%d\n", __LINE__); \
-			SLJIT_HALT_PROCESS(); \
-		} \
-	} while (0)
-
-#endif /* !SLJIT_ASSERT */
-
-#ifndef SLJIT_ASSERT_STOP
-
-#define SLJIT_ASSERT_STOP() \
-	do { \
-		printf("Should never been reached " __FILE__ ":%d\n", __LINE__); \
-		SLJIT_HALT_PROCESS(); \
-	} while (0)
-
-#endif /* !SLJIT_ASSERT_STOP */
-
-#else /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */
-
-/* Forcing empty, but valid statements. */
-#undef SLJIT_ASSERT
-#undef SLJIT_ASSERT_STOP
-
-#define SLJIT_ASSERT(x) \
-	do { } while (0)
-#define SLJIT_ASSERT_STOP() \
-	do { } while (0)
-
-#endif /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */
-
-#ifndef SLJIT_COMPILE_ASSERT
-
-/* Should be improved eventually. */
-#define SLJIT_COMPILE_ASSERT(x, description) \
-	SLJIT_ASSERT(x)
-
-#endif /* !SLJIT_COMPILE_ASSERT */
-
-#endif