diff options
| -rw-r--r-- | config_help.txt | 692 |
1 files changed, 263 insertions, 429 deletions
diff --git a/config_help.txt b/config_help.txt index 2ea2a812e4..944e520118 100644 --- a/config_help.txt +++ b/config_help.txt @@ -1,431 +1,265 @@ Usage: configure [options] -Installation options: - - These are optional, but you may specify install directories. - - -prefix <dir> ...... The deployment directory, as seen on the target device. - (default /usr/local/Qt-$QT_VERSION, $PWD if -developer-build is active) - - -extprefix <dir> ... The installation directory, as seen on the host machine. - (default SYSROOT/PREFIX) - - -hostprefix [dir] .. The installation directory for build tools running on the - host machine. If [dir] is not given, the current build - directory will be used. (default EXTPREFIX) - - You may use these to change the layout of the install. Note that all directories - except -sysconfdir should be located under -prefix/-hostprefix: - - -bindir <dir> ......... User executables will be installed to <dir> - (default PREFIX/bin) - -headerdir <dir> ...... Headers will be installed to <dir> - (default PREFIX/include) - -libdir <dir> ......... Libraries will be installed to <dir> - (default PREFIX/lib) - -archdatadir <dir> .... Arch-dependent data used by Qt will be installed to <dir> - (default PREFIX) - -plugindir <dir> ...... Plugins will be installed to <dir> - (default ARCHDATADIR/plugins) - -libexecdir <dir> ..... Program executables will be installed to <dir> - (default ARCHDATADIR/libexec, ARCHDATADIR/bin for MinGW) - -importdir <dir> ...... Imports for QML1 will be installed to <dir> - (default ARCHDATADIR/imports) - -qmldir <dir> ......... Imports for QML2 will be installed to <dir> - (default ARCHDATADIR/qml) - -datadir <dir> ........ Arch-independent data used by Qt will be installed to <dir> - (default PREFIX) - -docdir <dir> ......... Documentation will be installed to <dir> - (default DATADIR/doc) - -translationdir <dir> . Translations of Qt programs will be installed to <dir> - (default DATADIR/translations) - -sysconfdir <dir> ..... Settings used by Qt programs will be looked for in <dir> - (default PREFIX/etc/xdg) - -examplesdir <dir> .... Examples will be installed to <dir> - (default PREFIX/examples) - -testsdir <dir> ....... Tests will be installed to <dir> - (default PREFIX/tests) - - -hostbindir <dir> ..... Host executables will be installed to <dir> - (default HOSTPREFIX/bin) - -hostlibdir <dir> ..... Host libraries will be installed to <dir> - (default HOSTPREFIX/lib) - -hostdatadir <dir> .... Data used by qmake will be installed to <dir> - (default HOSTPREFIX) - -Configure options: - - The defaults (*) are usually acceptable. A plus (+) denotes a default value - that needs to be evaluated. If the evaluation succeeds, the feature is - included. Here is a short explanation of each option: - - * -release ............. Compile and link Qt with debugging turned off. - -debug ............... Compile and link Qt with debugging turned on. - -debug-and-release ... Compile and link two versions of Qt, with and without - debugging turned on (Apple platforms only). - - -force-debug-info .... Create symbol files for release builds. - - -developer-build ..... Compile and link Qt with Qt developer options (including auto-tests exporting) - - * -no-optimized-tools .. Do not build optimized host tools even in debug build. - -optimized-tools ..... Build optimized host tools even in debug build. - - -opensource .......... Compile and link the Open-Source Edition of Qt. - -commercial .......... Compile and link the Commercial Edition of Qt. - - -confirm-license ..... Automatically acknowledge the license (use with - either -opensource or -commercial) - - -c++std <edition> .... Compile Qt with C++ standard edition (c++11, c++14, c++1z) - Default: highest supported - - * -shared .............. Create and use shared Qt libraries. - -static .............. Create and use static Qt libraries. - - -no-accessibility .... Do not compile Accessibility support. - Disabling accessibility is not recommended, as it will break QStyle - and may break other internal parts of Qt. - With this switch you create a source incompatible version of Qt, - which is unsupported. - + -accessibility ....... Compile Accessibility support. - - -no-sql-<driver> ..... Disable SQL <driver>. - -sql-<driver> Enable SQL <driver> plugin. - - Possible values for <driver>: - [db2, ibase, mysql, oci, odbc, psql, sqlite, sqlite2, tds] - - -system-sqlite ....... Use sqlite from the operating system. - - -no-qml-debug ........ Do not build the in-process QML debugging support. - + -qml-debug ........... Build the QML debugging support. - - -platform target ..... The operating system and compiler you are building - on (default detected from host system). - - See the README file for a list of supported - operating systems and compilers. - - -no-sse2 ............. Do not compile with use of SSE2 instructions. - -no-sse3 ............. Do not compile with use of SSE3 instructions. - -no-ssse3 ............ Do not compile with use of SSSE3 instructions. - -no-sse4.1 ........... Do not compile with use of SSE4.1 instructions. - -no-sse4.2 ........... Do not compile with use of SSE4.2 instructions. - -no-avx .............. Do not compile with use of AVX instructions. - -no-avx2 ............. Do not compile with use of AVX2 instructions. - -no-avx512 ........... Do not compile with use of AVX512 instructions. - -no-mips_dsp ......... Do not compile with use of MIPS DSP instructions. - -no-mips_dspr2 ....... Do not compile with use of MIPS DSP rev2 instructions. - - -qtnamespace <name> .. Wraps all Qt library code in 'namespace <name> {...}'. - -qtlibinfix <infix> .. Renames all libQt*.so to libQt*<infix>.so. - - -testcocoon .......... Instrument Qt with the TestCocoon code coverage tool. - -gcov ................ Instrument Qt with the GCov code coverage tool. - - -D <string> .......... Add an explicit define to the preprocessor. - -I <string> .......... Add an explicit include path. - -L <string> .......... Add an explicit library path. - - + -pkg-config .......... Use pkg-config to detect include and library paths. By default, - configure determines whether to use pkg-config or not with - some heuristics such as checking the environment variables. - -no-pkg-config ....... Disable use of pkg-config. - -force-pkg-config .... Force usage of pkg-config (skips pkg-config usability - detection heuristic). - - -help, -h ............ Display this information. - -Third Party Libraries: - - -qt-zlib ............. Use the zlib bundled with Qt. - + -system-zlib ......... Use zlib from the operating system. - See http://www.gzip.org/zlib - - -no-mtdev ............ Do not compile mtdev support. - + -mtdev ............... Enable mtdev support. - - + -no-journald ......... Do not send logging output to journald. - -journald ............ Send logging output to journald. - - + -no-syslog ........... Do not send logging output to syslog. - -syslog .............. Send logging output to syslog. - - -no-gif .............. Do not compile GIF reading support. - - -no-libpng ........... Do not compile PNG support. - -qt-libpng ........... Use the libpng bundled with Qt. - + -system-libpng ....... Use libpng from the operating system. - See http://www.libpng.org/pub/png - - -no-libjpeg .......... Do not compile JPEG support. - -qt-libjpeg .......... Use the libjpeg bundled with Qt. - + -system-libjpeg ...... Use libjpeg from the operating system. - See http://www.ijg.org - - -no-doubleconversion ..... Use sscanf_l and snprintf_l for (imprecise) double conversion. - -qt-doubleconversion ..... Use the libdouble-conversion bundled with Qt. - + -system-doubleconversion . Use the libdouble-conversion provided by the system. - See https://github.com/google/double-conversion - - -no-freetype ......... Do not compile in Freetype2 support. - -qt-freetype ......... Use the libfreetype bundled with Qt. - + -system-freetype...... Use the libfreetype provided by the system (enabled if -fontconfig is active). - See http://www.freetype.org - - -no-harfbuzz ......... Do not compile HarfBuzz-NG support. - -qt-harfbuzz ......... Use HarfBuzz-NG bundled with Qt to do text shaping. - It can still be disabled by setting - the QT_HARFBUZZ environment variable to "old". - + -system-harfbuzz ..... Use HarfBuzz-NG from the operating system - to do text shaping. It can still be disabled - by setting the QT_HARFBUZZ environment variable to "old". - See http://www.harfbuzz.org - - -no-openssl .......... Do not compile support for OpenSSL. - + -openssl ............. Enable run-time OpenSSL support. - -openssl-linked ...... Enabled linked OpenSSL support. - - * -no-libproxy ......... Do not compile support for libproxy - -libproxy ............ Use libproxy from the operating system. - - -qt-pcre ............. Use the PCRE library bundled with Qt. - + -system-pcre ......... Use the PCRE library from the operating system. - - -qt-xcb .............. Use xcb- libraries bundled with Qt. - (libxcb.so will still be used from operating system). - + -system-xcb .......... Use xcb- libraries from the operating system. - - -xkb-config-root ..... Set default XKB config root. This option is used only together with -qt-xkbcommon-x11. - -qt-xkbcommon-x11 .... Use the xkbcommon library bundled with Qt in combination with xcb. - + -system-xkbcommon-x11 Use the xkbcommon library from the operating system in combination with xcb. - - -no-xkbcommon-evdev .. Do not use X-less xkbcommon when compiling libinput support. - * -xkbcommon-evdev ..... Use X-less xkbcommon when compiling libinput support. - - -no-xinput2 .......... Do not compile XInput2 support. - * -xinput2 ............. Compile XInput2 support. - - -no-xcb-xlib.......... Do not compile Xcb-Xlib support. - * -xcb-xlib............. Compile Xcb-Xlib support. - - -no-glib ............. Do not compile Glib support. - + -glib ................ Compile Glib support. - - -no-pulseaudio ....... Do not compile PulseAudio support. - + -pulseaudio .......... Compile PulseAudio support. - - -no-alsa ............. Do not compile ALSA support. - + -alsa ................ Compile ALSA support. - - -no-gtk .............. Do not compile GTK platform theme support. - + -gtk ................. Compile GTK platform theme support. - -Additional options: - - -make <part> ......... Add part to the list of parts to be built at make time. - (defaults to: libs tools examples) - -nomake <part> ....... Exclude part from the list of parts to be built. - - -skip <module> ....... Exclude an entire module from the build. - - -no-compile-examples . Install only the sources of examples. - - -no-gui .............. Don't build the Qt GUI module and dependencies. - + -gui ................. Build the Qt GUI module and dependencies. - - -no-widgets .......... Don't build the Qt Widgets module and dependencies. - + -widgets ............. Build the Qt Widgets module and dependencies. - - -R <string> .......... Add an explicit runtime library path to the Qt - libraries. - - -no-rpath ............ Do not use the library install path as a runtime - library path. On Apple platforms, this implies using - absolute install names (based in -libdir) for dynamic - libraries and frameworks. - + -rpath ............... Link Qt libraries and executables using the library - install path as a runtime library path. Equivalent - to -R install_libpath - - -continue ............ Continue as far as possible if an error occurs. - - -verbose, -v ......... Print verbose information about each step of the - configure process. - - -silent .............. Reduce the build output so that warnings and errors - can be seen more easily. - - -no-cups ............. Do not compile CUPS support. - * -cups ................ Compile CUPS support. - Requires cups/cups.h and libcups.so.2. - - -no-iconv ............ Do not compile support for iconv(3). - * -iconv ............... Compile support for iconv(3). - - -no-evdev ............ Do not compile support for evdev. - * -evdev ............... Compile support for evdev. - - -no-tslib ............ Do not compile support for tslib. - * -tslib ............... Compile support for tslib. - - -no-icu .............. Do not compile support for ICU libraries. - + -icu ................. Compile support for ICU libraries. - - -no-fontconfig ....... Do not compile FontConfig support. - + -fontconfig .......... Compile FontConfig support. - - -no-strip ............ Do not strip binaries and libraries of unneeded symbols. - * -strip ............... Strip binaries and libraries of unneeded symbols when installing. - - * -no-pch .............. Do not use precompiled header support. - -pch ................. Use precompiled header support. - - * -no-ltcg Do not use Link Time Code Generation - -ltcg Use Link Time Code Generation. - - -no-dbus ............. Do not compile the Qt D-Bus module. - + -dbus-linked ......... Compile the Qt D-Bus module and link to libdbus-1. - -dbus-runtime ........ Compile the Qt D-Bus module and dynamically load libdbus-1. - - -reduce-relocations .. Reduce relocations in the libraries through extra - linker optimizations (Qt/X11 and Qt for Embedded Linux only; - experimental; needs GNU ld >= 2.18). - - -no-use-gold-linker .. Do not link using the GNU gold linker. - + -use-gold-linker ..... Link using the GNU gold linker if available. - - -force-asserts ....... Force Q_ASSERT to be enabled even in release builds. - - -sanitize [address|thread|memory|undefined] Enables the specified compiler sanitizer. - - -device <name> ............... Cross-compile for device <name> (experimental) - -device-option <key=value> ... Add device specific options for the device mkspec - (experimental) - - -host-option <key=value> ..... Add host specific options for the host mkspec - - * -no-separate-debug-info ...... Do not store debug information in a separate file. - -separate-debug-info ......... Strip debug information into a separate file. - - -no-xcb .............. Do not compile Xcb (X protocol C-language Binding) support. - * -xcb ................. Compile Xcb support. - - -no-eglfs ............ Do not compile EGLFS (EGL Full Screen/Single Surface) support. - * -eglfs ............... Compile EGLFS support. - - -no-kms .............. Do not compile backends for KMS. - * -kms ................. Compile backends for KMS. - - -no-gbm .............. Do not compile backends for GBM. - * -gbm ................. Compile backends for GBM. - - * -no-directfb ......... Do not compile DirectFB support. - -directfb ............ Compile DirectFB support. - - -no-linuxfb .......... Do not compile Linux Framebuffer support. - * -linuxfb ............. Compile Linux Framebuffer support. - - * -no-mirclient......... Do not compile Mir client support. - -mirclient............ Compile Mir client support. - - -qpa <name> .......... Sets the default QPA platform (e.g xcb, cocoa, windows). - - -xplatform target .... The target platform when cross-compiling. - - -sysroot <dir> ....... Sets <dir> as the target compiler's and qmake's sysroot and also sets pkg-config paths. - -no-gcc-sysroot ...... When using -sysroot, it disables the passing of --sysroot to the compiler - - -external-hostbindir <path> .. Path to Qt tools built for this machine. Use this when -platform - does not match the current system, i.e., to make a Canadian Cross Build. - - -no-feature-<feature> Do not compile in <feature>. - -feature-<feature> ... Compile in <feature>. The available features - are described in src/corelib/global/qfeatures.txt - - -qreal [double|float] typedef qreal to the specified type. The default is double. - Note that changing this flag affects binary compatibility. - - -no-opengl ........... Do not support OpenGL. - -opengl <api> ........ Enable OpenGL support - With no parameter, this will attempt to auto-detect - OpenGL ES 2.0 and higher, or regular desktop OpenGL. - Use es2 for <api> to override auto-detection. - - -no-libinput ......... Do not support libinput. - * -libinput ............ Enable libinput support. - - -no-gstreamer ........ Do not support GStreamer. - + -gstreamer <version> . Enable GStreamer support - With no parameter, this will attempt to auto-detect GStreamer 0.10 and - 1.0. GStreamer 1.0 is used by default when available. - Use 0.10 or 1.0 for <version> to override auto-detection. - - -no-system-proxies ... Do not use system network proxies by default. - * -system-proxies ...... Use system network proxies by default. - - * -no-sctp ............. Do not compile SCTP network protocol support. - -sctp ................ Compile SCTP support. - - -no-warnings-are-errors Make warnings be treated normally - -warnings-are-errors Make warnings be treated as errors - (enabled if -developer-build is active) - -QNX options: - - -no-slog2 ........... Do not compile with slog2 support. - -slog2 .............. Compile with slog2 support. - - -no-pps ............. Do not compile with pps support. - -pps ................ Compile with pps support. - - -no-imf ............. Do not compile with imf support. - -imf ................ Compile with imf support. - - -no-lgmon ........... Do not compile with lgmon support. - -lgmon .............. Compile with lgmon support. - -Apple platform options: - - -Fstring ............ Add an explicit framework path. - - * -framework .......... Build Qt as a series of frameworks and - link tools against those frameworks. - -no-framework ....... Do not build Qt as a series of frameworks. - - * -securetransport .... Use SecureTransport instead of OpenSSL - - -no-securetransport . Do not use SecureTransport, either use OpenSSL or do not use any SSL backend - at all (if combined with -no-openssl). - - -sdk <sdk> .......... Build Qt using Apple provided SDK <sdk>. The argument should be - one of the available SDKs as listed by 'xcodebuild -showsdks'. - Note that the argument applies only to Qt libraries and applications built - using the target mkspec - not host tools such as qmake, moc, rcc, etc. - -Android options: - - -android-sdk path .............. The Android SDK root path. - (default $ANDROID_SDK_ROOT) - - -android-ndk path .............. The Android NDK root path. - (default $ANDROID_NDK_ROOT) - - -android-ndk-platform .......... Sets the android platform - - -android-ndk-host .............. Sets the android NDK host (linux-x86, linux-x86_64, etc.) - (default $ANDROID_NDK_HOST) - - -android-arch .................. Sets the android architecture (armeabi, armeabi-v7a, x86, mips, - arm64-v8a, x86_64, mips64) - - -android-toolchain-version ..... Sets the android toolchain version - - -no-android-style-assets ....... Do not compile in the code which automatically extracts - style assets from the run-time device. Setting this will - make the Android style behave incorrectly, but will enable - compatibility with the LGPL2.1 license. - * -android-style-assets .......... Compile the code which automatically extracts style assets - from the run-time device. This option will make the - Android platform plugin incompatible with the LGPL2.1. +Top-level installation directories: + -prefix <dir> ...... The deployment directory, as seen on the target device. + [/usr/local/Qt-$QT_VERSION, $PWD if -developer-build] + -extprefix <dir> ... The installation directory, as seen on the host machine. + [SYSROOT/PREFIX] + -hostprefix [dir] .. The installation directory for build tools running on + the host machine. If [dir] is not given, the current + build directory will be used. [EXTPREFIX] + -external-hostbindir <path> ... Path to Qt tools built for this machine. + Use this when -platform does not match the current + system, i.e., to make a Canadian Cross Build. + +Fine tuning of installation directory layout. Note that all directories +except -sysconfdir should be located under -prefix/-hostprefix: + + -bindir <dir> ......... Executables [PREFIX/bin] + -headerdir <dir> ...... Header files [PREFIX/include] + -libdir <dir> ......... Libraries [PREFIX/lib] + -archdatadir <dir> .... Arch-dependent data [PREFIX] + -plugindir <dir> ...... Plugins [ARCHDATADIR/plugins] + -libexecdir <dir> ..... Helper programs [ARCHDATADIR/bin on Windows, + ARCHDATADIR/libexec otherwise] + -importdir <dir> ...... QML1 imports [ARCHDATADIR/imports] + -qmldir <dir> ......... QML2 imports [ARCHDATADIR/qml] + -datadir <dir> ........ Arch-independent data [PREFIX] + -docdir <dir> ......... Documentation [DATADIR/doc] + -translationdir <dir> . Translations [DATADIR/translations] + -sysconfdir <dir> ..... Settings used by Qt programs [PREFIX/etc/xdg] + -examplesdir <dir> .... Examples [PREFIX/examples] + -testsdir <dir> ....... Tests [PREFIX/tests] + + -hostbindir <dir> ..... Host executables [HOSTPREFIX/bin] + -hostlibdir <dir> ..... Host libraries [HOSTPREFIX/lib] + -hostdatadir <dir> .... Data used by qmake [HOSTPREFIX] + +Conventions for the remaining options: When an option's description is +followed by a list of values in brackets, the interpretation is as follows: +'yes' represents the bare option; all other values are possible prefixes to +the option, e.g., -no-gui. Alternatively, the value can be assigned, e.g., +-gui=yes. Values are listed in the order they are tried if not specified; +'auto' is a shorthand for 'yes/no'. Solitary 'yes' and 'no' represent binary +options without auto-detection. + +Configure meta: + + -help, -h ............ Display this help screen + -verbose, -v ......... Print verbose messages during configuration + -continue ............ Continue configure despite errors + +Build options: + + -opensource .......... Build the Open-Source Edition of Qt + -commercial .......... Build the Commercial Edition of Qt + -confirm-license ..... Automatically acknowledge the license + + -release ............. Build Qt with debugging turned off [yes] + -debug ............... Build Qt with debugging turned on [no] + -debug-and-release ... Build two versions of Qt, with and without + debugging turned on [yes] (Apple and Windows only) + -optimized-tools ..... Build optimized host tools even in debug build [no] + -force-debug-info .... Create symbol files for release builds [no] + -separate-debug-info . Split off debug information to separate files [no] + -strip ............... Strip release binaries of unneeded symbols [yes] + -force-asserts ....... Enable Q_ASSERT even in release builds [no] + -developer-build ..... Compile and link Qt for developing Qt itself + (exports for auto-tests, extra checks, etc.) [no] + + -shared .............. Build shared Qt libraries [yes] (no for UIKit) + -static .............. Build static Qt libraries [no] (yes for UIKit) + -framework ........... Build Qt framework bundles [yes] (Apple only) + + -platform <target> ... Select host mkspec [detected] + -host-option <key=value> ..... Add option for the host mkspec + -xplatform <target> .. Select target mkspec when cross-compiling [PLATFORM] + -device <name> ....... Cross-compile for device <name> + -device-option <key=value> ... Add option for the device mkspec + + -qtnamespace <name> .. Wrap all Qt library code in 'namespace <name> {...}'. + -qtlibinfix <infix> .. Rename all libQt5*.so to libQt5*<infix>.so. + + -testcocoon .......... Instrument with the TestCocoon code coverage tool [no] + -gcov ................ Instrument with the GCov code coverage tool [no] + -sanitize {address|thread|memory|undefined} + Instrument with the specified compiler sanitizer. + + -c++std <edition> .... Select C++ standard <edition> [c++1z/c++14/c++11] + + -sse2 ................ Use SSE2 instructions [auto] + -sse3/-ssse3/-sse4.1/-sse4.2/-avx/-avx2/-avx512 + Enable use of particular x86 instructions [auto] + Enabled ones are still subject to runtime detection. + -mips_dsp/-mips_dspr2 Use MIPS DSP/rev2 instructions [auto] + + -qreal <type> ........ typedef qreal to the specified type. [double] + Note: this affects binary compatibility. + + -R <string> .......... Add an explicit runtime library path to the Qt + libraries. Supports paths relative to LIBDIR. + -rpath ............... Link Qt libraries and executables using the library + install path as a runtime library path. Similar to + -R LIBDIR. On Apple platforms, disabling this implies + using absolute install names (based in LIBDIR) for + dynamic libraries and frameworks. [auto] + + -reduce-exports ...... Reduce amount of exported symbols [auto] + -reduce-relocations .. Reduce amount of relocations [auto] + + -pch ................. Use precompiled headers [auto] + -ltcg ................ Use Link Time Code Generation [no] + -use-gold-linker ..... Use the GNU gold linker [auto] + + -warnings-are-errors . Treat warnings as errors [no; yes if -developer-build] + -silent .............. Reduce the build output so that warnings and errors + can be seen more easily + +Build environment: + + -sysroot <dir> ....... Set <dir> as the target sysroot + -gcc-sysroot ......... With -sysroot, pass --sysroot to the compiler [yes] + + -pkg-config .......... Use pkg-config [auto] + + -D <string> .......... Pass additional preprocessor define + -I <string> .......... Pass additional include path + -L <string> .......... Pass additional library path + -F <string> .......... Pass additional framework path (Apple only) + + -sdk <sdk> ........... Build Qt using Apple provided SDK <sdk>. The argument + should be one of the available SDKs as listed by + 'xcodebuild -showsdks'. + Note that the argument applies only to Qt libraries + and applications built using the target mkspec - not + host tools such as qmake, moc, rcc, etc. + + -android-sdk path .... Set Android SDK root path [$ANDROID_SDK_ROOT] + -android-ndk path .... Set Android NDK root path [$ANDROID_NDK_ROOT] + -android-ndk-platform Set Android platform + -android-ndk-host .... Set Android NDK host (linux-x86, linux-x86_64, etc.) + [$ANDROID_NDK_HOST] + -android-arch ........ Set Android architecture (armeabi, armeabi-v7a, + arm64-v8a, x86, x86_64, mips, mips64) + -android-toolchain-version ... Set Android toolchain version + -android-style-assets Automatically extract style assets from the device at + run time. This option makes the Android style behave + correctly, but also makes the Android platform plugin + incompatible with the LGPL2.1. [yes] + +Component selection: + + -skip <repo> ......... Exclude an entire repository from the build. + -make <part> ......... Add <part> to the list of parts to be built. + Specifying this option clears the default list first. + [libs and examples, also tools if not cross-building, + also tests if -developer-build] + -nomake <part> ....... Exclude <part> from the list of parts to be built. + -compile-examples .... When unset, install only the sources of examples [yes] + -gui ................. Build the Qt GUI module and dependencies [yes] + -widgets ............. Build the Qt Widgets module and dependencies [yes] + -no-dbus ............. Do not build the Qt D-Bus module [default on Android] + -dbus-linked ......... Build Qt D-Bus and link to libdbus-1 [auto] + -dbus-runtime ........ Build Qt D-Bus and dynamically load libdbus-1 [no] + -feature-<feature> ... Enable <feature>. The available features are described + in src/corelib/global/qfeatures.txt. [all enabled] + -accessibility ....... Enable accessibility support [yes] + Note: Disabling accessibility is not recommended. + -qml-debug ........... Enable QML debugging support [yes] + +Qt comes with bundled copies of some 3rd party libraries. These are used +by default if auto-detection of the respective system library fails. + +Core options: + + -doubleconversion .... Select used double conversion library [system/qt/no] + No implies use of sscanf_l and snprintf_l (imprecise). + -glib ................ Enable Glib support [auto] + -iconv ............... Enable iconv(3) support [auto] + -icu ................. Enable ICU support [auto] + -pps ................. Enable PPS support [auto] (QNX only) + -pcre ................ Select used libpcre3 [system/qt] + -zlib ................ Select used zlib [system/qt] + + Logging backends: + -journald .......... Enable journald support [no] + -syslog ............ Enable syslog support [no] + -slog2 ............. Enable slog2 support [auto] (QNX only) + +Network options: + + -ssl ................. Enable either SSL support method [auto] + -no-openssl .......... Do not use OpenSSL [default on Apple] + -openssl-linked ...... Use OpenSSL and link to libssl [no] + -openssl-runtime ..... Use OpenSSL and dynamically load libssl [auto] + -securetransport ..... Use SecureTransport [auto] (Apple only) + + -sctp ................ Enable SCTP support [no] + + -libproxy ............ Enable use of libproxy [no] + -system-proxies ...... Use system network proxies by default [yes] + +Gui, printing, widget options: + + -cups ................ Enable CUPS support [auto] + + -fontconfig .......... Enable Fontconfig support [auto] + -freetype ............ Select used FreeType [system/qt/no] + -harfbuzz ............ Select used HarfBuzz-NG [system/qt/no] + (Not auto-detected on Apple and Windows) + + -gtk ................. Enable GTK platform theme support [auto] + + -lgmon ............... Enable lgmon support [auto] (QNX only) + + -no-opengl ........... Disable OpenGL support + -opengl <api> ........ Enable OpenGL support. Supported APIs: + es2 (default on Windows), desktop (default on Unix) + -opengles3 ........... Enable OpenGL ES 3.x support instead of ES 2.x [auto] + + -qpa <name> .......... Select default QPA backend (e.g., xcb, cocoa, windows) + -xcb-xlib............. Enable Xcb-Xlib support [auto] + + Platform backends: + -directfb .......... Enable DirectFB support [no] (Unix only) + -eglfs ............. Enable EGLFS support [auto; no on Android] + -gbm ............... Enable backends for GBM [auto] (Linux only) + -kms ............... Enable backends for KMS [auto] (Linux only) + -linuxfb ........... Enable Linux Framebuffer support [auto] (Linux only) + -mirclient ......... Enable Mir client support [no] (Linux only) + -xcb ............... Select used xcb-* libraries [system/qt/no] + (-qt-xcb still uses system version of libxcb itself) + + Input backends: + -evdev ............. Enable evdev support [auto] + -imf ............... Enable IMF support [auto] (QNX only) + -libinput .......... Enable libinput support [auto] + -mtdev ............. Enable mtdev support [auto] + -tslib ............. Enable tslib support [auto] + -xinput2 ........... Enable XInput2 support [auto] + -xkbcommon-x11 ..... Select xkbcommon used in combination with xcb + [system/qt/no] + -xkb-config-root <dir> ... With -qt-xkbcommon-x11, set default XKB config + root <dir> [detect] + -xkbcommon-evdev ... Enable X-less xkbcommon in combination with libinput + [auto] + + Image formats: + -gif ............... Enable reading support for GIF [auto] + -libpng ............ Select used libpng [system/qt/no] + -libjpeg ........... Select used libjpeg [system/qt/no] + +Database options: + + -sql-<driver> ........ Enable SQL <driver> plugin. Supported drivers: + db2 ibase mysql oci odbc psql sqlite2 sqlite tds + [all auto] + -sqlite .............. Select used sqlite3 [system/qt] + +Multimedia options: + + -pulseaudio .......... Enable PulseAudio support [auto] + -alsa ................ Enable ALSA support [auto] + -no-gstreamer ........ Disable support for GStreamer + -gstreamer [version] . Enable GStreamer support [auto] + With no parameter, 1.0 is tried first, then 0.10. |