summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Fix some compiler errors caused by bit-rot in manual testsEdward Welbourne2020-07-2712-137/+39
| | | | | | | | | | | Two methods that have gone away or been renamed, an enum that now doesn't support being assigned from int. QTime should no longer be used as a timer. Removed a test of deprecated code that's gone away. Task-number: QTBUG-85700 Change-Id: Idc6d59542625d22b9937084411b54b0d8aa87f00 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* Fix misplaced nullptr, used for a flag valueEdward Welbourne2020-07-271-1/+1
| | | | | | Task-number: QTBUG-85700 Change-Id: I34b1aa8430842d96eb515d709b49de4e60976ac9 Reviewed-by: Andy Shaw <andy.shaw@qt.io>
* Unify QLoggingCategory's two constructorsEdward Welbourne2020-07-272-20/+5
| | | | | | | | | This follows upon commit ca0df4b2694fc3ca0c31cda0d5edec7e76f7dfcb's comment requesting the unification. Tidied docs at the same time. Task-number: QTBUG-85700 Change-Id: Ia12dbe98b94388030c7a06036c5287cfbcc4fd05 Reviewed-by: Kai Koehne <kai.koehne@qt.io>
* Move a comment from a header to relevant docsEdward Welbourne2020-07-272-2/+2
| | | | | | | | | | | | QProcess::FailedToStart had a //### comment which looked distractingly like it wanted some action, but it was really just documenting the enum member. Removed the comment and updated the doc to reflect the one fragment of information that the comment added. Task-number: QTBUG-85700 Change-Id: Ibe11b91a998751ee9cdd3018cc6a3d8f3ab30eea Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
* cmake: Add some air to configure summaryTor Arne Vestbø2020-07-261-4/+3
| | | | | Change-Id: I3408957d8a81ac3080eac28e48dbafe9059e22f5 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* tst_qicon: Enable lowdpi test using qt_add_test argumentTor Arne Vestbø2020-07-261-1/+1
| | | | | Change-Id: I98f850c668a45d127abb1c2af5915f2cbcbd1cdb Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* Clean-up methods with default values in JSON classesSona Kurazyan2020-07-263-24/+5
| | | | | | | Task-number: QTBUG-85700 Change-Id: I46e7c58e4cc94cf19cd9f11e03d2a498cd0c8922 Reviewed-by: Edward Welbourne <edward.welbourne@qt.io> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Improve the iterators of QJsonArray and QJsonObjectSona Kurazyan2020-07-265-181/+202
| | | | | | | | | Remove the fake QJsonValuePtr and QJsonValueRefPtr required for operator()-> of QJsonArray and QJsonObject iterators. Task-number: QTBUG-85700 Change-Id: I622a5a426edb13b32f9d00a02c3c148320fbccba Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Fix warnings about unused variables and functions in testsTor Arne Vestbø2020-07-2610-47/+7
| | | | | Change-Id: Ia758a91384083c13fb4d743f500fef7a6629dfd5 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Disable warning about self-move and self-assign-overloadTor Arne Vestbø2020-07-267-0/+28
| | | | | Change-Id: I1d20d3f424eced5cc5787934663b9d243f75d46e Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Fix warning when comparing qsizetype to result of sizeofTor Arne Vestbø2020-07-261-1/+1
| | | | | | | warning: comparison of integers of different signs: 'qsizetype' (aka 'long long') and 'unsigned long' Change-Id: I03acb1f7aed782169a0a42cd8afc84b85991cd1e Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Fix warning when printing of qsizetypeTor Arne Vestbø2020-07-265-10/+10
| | | | | | | warning: format specifies type 'int' but the argument has type 'qsizetype' (aka 'long long') Change-Id: I6099b53efecea46d191d5dc019c986f99e49c1f1 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Make missing XCode a warning instead of an errorAlex Richardson2020-07-261-1/+1
| | | | | | | | This fixes the macOS build when you only have the CommandLineTools installed. Change-Id: I620bc535b508b604a875f53dec8c57af23efeac1 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io> Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* Avoid claiming F16C support on non-x86 platformsTor Arne Vestbø2020-07-261-0/+1
| | | | | | | | | | | | | | The configuration tests might indicate the compiler supports F16C, due to building the tests as x86. But in a multi arch situation, such as when doing universal builds for x86_64 and arm64, we must also verify that the current complication unit is building for x86. Instead of adding Q_PROCESSOR_X86 checks to each call site that checks for F16C, we sanitize the F16C support define as we do for other CPU feature defines. Change-Id: I9ef53c9d47690dddb0b1b82f77b0ebf74f3295bb Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Build testcase_lowdpi tests as application bundles on macOSTor Arne Vestbø2020-07-261-0/+4
| | | | | | | | As stand-alone executables are not tracked by Launch Services, which is responsible for applying the low-dpi override at runtime. Change-Id: Ifac71dfa9b9ffa5ab1302dfca8fa1f5ddd491082 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Windows QPA: Move dark mode handling to the new interfaceFriedemann Kleint2020-07-2511-43/+61
| | | | | | | | | | Move options to new interface, making them settable from code on this occasion. Task-number: QTBUG-83252 Change-Id: Idd80667c502a8cde5d7c66d7e597ea34c22738e7 Reviewed-by: André de la Rocha <andre.rocha@qt.io> Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* QtGui: Add Windows conversion functions for to QImageFriedemann Kleint2020-07-243-20/+119
| | | | | | | | | Add conversions from/to HBITMAP, HICON to QImage. Split the pixmap conversion functions apart to use them. Task-number: QTBUG-81876 Change-Id: Ic0c41a402a1f6e9bec572fc4d691357bd48e6423 Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* Fix under non-integer scaling incorrect update areaTang HaiXiang2020-07-251-1/+1
| | | | | | | | | | | Given some decimal scaling, the clipping of the QRegion/QRect passed to the QRegion/QRect done inside paintEvent cannot handle the decimal scaling. Solved by only converting QRect to a certain QRectF and calling QRectF overload instead of QRect. Fixes: QTBUG-82601 Fixes: QTBUG-64854 Pick-to: 5.15 Change-Id: I0d8f4193aabfc0d917612db68d2a39ebb726fa2f Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
* fix qcombobox code styleWang Peng2020-07-251-1/+1
| | | | | | | In code style, it shouldn't look like this Change-Id: I615f3a6ca1b4f33e0693a4e272d5703d9285a8a8 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* Set name of X11 Client Leader Window to application nameRaphael Rosch2020-07-241-1/+1
| | | | | | | Fixes: QTBUG-75526 Pick-to: 5.15 Change-Id: If4374208d0d854cee714b4689a2f3566394bb6a0 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* cmake: Add LOWDPI option to match CONFIG+=testcase_lowdpiTor Arne Vestbø2020-07-241-1/+9
| | | | | Change-Id: I8bcabf41ed353ec4e940a8fcea5b698e0ddf278f Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* CMake: Fix handling of CMAKE_FIND_ROOT_PATH and CMAKE_PREFIX_PATHAlexandru Croitor2020-07-244-12/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While trying to implement the 'host artifact reuse' Coin instructions change, a bug surfaced where the qemu configurations didn't find the host tools and instead tried to use the cross-compiled tools while building qtbase, which failed due to not finding the runtime linker (another unsolved issue). Before the host artifact reuse change, the host tools were found successfully. The difference that caused the issue is that the target install prefix was a direct subfolder of the host prefix. host - /home/qt/work/qt/install target - /home/qt/work/qt/install/target Before the host reuse change the install prefixes were as follows host - /home/qt/work/qt/install/host target - /home/qt/work/qt/install/target While looking for the Qt6CoreTools package, we temporarily set CMAKE_FIND_ROOT_PATH and CMAKE_PREFIX_PATH to contain first '/home/qt/work/qt/install' and then '/home/qt/work/qt/install/target'. CMake then reroots the CMAKE_PREFIX_PATH values onto values in CMAKE_FIND_ROOT_PATH, making an MxN list of prefixes to search. Rerooting essentially means concatenating 2 paths, unless the considered prefix is a subfolder of the root path. What happened was that the first considered value was '/home/qt/work/qt/install/home/qt/work/qt/install', a non-existent location that gets discarded. The second considered value was '/home/qt/work/qt/install/target. The second value is the result of seeing that '/home/qt/work/qt/install/target' is a subfolder of '/home/qt/work/qt/install' and thus the root path is stripped. All of this is done in cmFindPackageCommand::FindConfig() -> cmFindCommon::RerootPaths. The behavior above caused the target tools be found instead of the host ones. Before the host reuse change, both of the initial constructed prefixes were discared due to them not existing, e.g. '/home/qt/work/qt/install/target/home/qt/work/qt/install/target' and '/home/qt/work/qt/install/host/home/qt/work/qt/install/host' One of the later prefixes combined CMAKE_FIND_ROOT_PATH == '/home/qt/work/qt/install/host' + CMAKE_PREFIX_PATH == '/' resulting in '/home/qt/work/qt/install/host/' and this accidentally found the host tools package. We actually stumbled upon this issue a while ago when implementing Qt 5.14 Android CMake support in 52c799ed4425076df4353c02950ea1444fe5f102 That commit message mentions the fix is to add a "lib/cmake" suffix to the PATHS option of find_package(). This would cause the subfolder => strip root behavior mentioned above. So finally the fix. First, make sure not to append QT_HOST_PATH in the toolchain file, there shouldn't be any need to do that, give that we temporarily set it when looking for Tools packages. Second, recreate the subdir scenario in the Qt toolchain file by setting CMAKE_FIND_ROOT_PATH to the current (relocated) install prefix as usual, but also setting CMAKE_PREFIX_PATH to a new value poining to the CMake directory. Aka '/home/alex/qt' and '/home/alex/qt/lib/cmake'. Third, when a QT_HOST_PATH is given, save 2 paths in the generated Qt toolchain: QT_HOST_PATH and QT_HOST_PATH_CMAKE_DIR. There are the host equivalents of the target ones above. Use these values when looking for host tools in Qt6CoreModuleDependencies.cmake, again facilitaing the subdir behavior. Note these are currently absolute paths and are not relocatable. We'll have to figure out if it's even possible to make the host path relocatable. Finally as a cleanup, look for the Qt6HostInfo package in QtSetup strictly in the given QT_HOST_PATH, so CMake doesn't accidentally find a system Qt package. Change-Id: Iefbcfbbcedd35f1c33417ab7e9f44eaf35ff6337 Reviewed-by: Cristian Adam <cristian.adam@qt.io>
* CMake: Use CMAKE_AUTOGEN_VERBOSE to see moc invocationsToni Saario2020-07-244-6/+6
| | | | | | | | | | In qmake builds we can see the moc invocations, whereas in CMake builds by default we don't. Modify the Coin instructions to pass the CMAKE_AUTOGEN_VERBOSE cache variable so that AUTOMOC prints the moc invocations. Change-Id: I50be13224839fbbdece3c9e8a4935a72aba91a8e Reviewed-by: Cristian Adam <cristian.adam@qt.io>
* CMake: Add instructions to re-use host artifacts for target buildsToni Saario2020-07-242-53/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't want to build the host Qt configuration every single time we do a cross-build in Coin. Coin learned some new qt5.git platform configuration options, which allow specifying a dependency between a host Coin configuration and a target one. This means we can specify a host macOS config as a dependency when building iOS, and the host artifacts for all dependent repos (qtbase, qtsvg, qtdeclarative, etc) will be installed into /home/qt/work/install (as specified by the {{.AgentWorkingDir}}/install location). Same for Linux + Android and Linux + qemu. Modify the qtbase Coin instructions to use these installed host artifacts if such a dependency is present (platformDependency is not null). The target artifacts will be installed into a subfolder of the host installation, called 'target', e.g. /home/qt/work/install/target. If a dependency is not present, continue to build a host Qt before doing a target build. This allows gradual conversion of configurations in case if some of them don't work, or if the dependencies.yaml have not propagated far enough for all new repos to use the new instructions. In this case the locations of the artifacts are different host - /home/qt/work/install/host target - /home/qt/work/install/target Task-number: QTBUG-85623 Change-Id: I33539f4376034539fb7db80293dc4d39dcb9539b Reviewed-by: Cristian Adam <cristian.adam@qt.io>
* git: Ignore CMakeLists.txt.userKai Koehne2020-07-241-0/+1
| | | | | | | Created by Qt Creator Change-Id: I33f8a447a166adb5ec3d4db11d2dd3bcfc0104b6 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Windows QPA: Move window properties to the new interfacesFriedemann Kleint2020-07-246-44/+26
| | | | | | | | Affects the custom margin used by QWizard. Task-number: QTBUG-83252 Change-Id: Iffda043f106282f682e119ec955fa2b2eb0f259e Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* Mark QIcon test as not supporting high-DPI pixmapsVolker Hilsheimer2020-07-242-1/+2
| | | | | | | | | As of 951d49075066cf8f66906c803c32cc2c52fd8e18, high-DPI support for pixmaps is enabled by default, which makes this test fail when running on a local system with a high-DPI display. Change-Id: I3fe4674d19a57bf82aa32b01d470c714092f7e62 Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* Remove the space before the ')'Li Zhong Ming2020-07-241-3/+3
| | | | | | | | | 1.According to QT coding styles, there should be no space around the parentheses 2.Replace the & operator with testflag() Task-number: QTBUG-85617 Change-Id: I1d1ae9ec0d20f3401ce4a2ee9089b72205f6e8eb Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
* Remove non-Qt6 compile time switches from QtCoreAllan Sandfeld Jensen2020-07-2422-280/+4
| | | | | | | | We already manage to compile without this code, and none of it are full classes or separate functions suitable for qt5compat. Change-Id: I47facac7ec621cfc4b0b26214b7de37897443519 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
* testlib: Set AA_UseHighDpiPixmaps false for low-DPI testsTor Arne Vestbø2020-07-242-0/+10
| | | | | Change-Id: I129118c303527e4aff25c4d5326eefa43c231d44 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* macOS: Clarify that QCocoaKeyMapper only computes 8 modifier statesTor Arne Vestbø2020-07-242-24/+8
| | | | | Change-Id: Ie4a53bbc16cde7b4aa68172015bbfeaa9e316bcc Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
* Add -Wsuggest-override for gcc >= 9.2Alexander Volkov2020-07-242-0/+6
| | | | | | | | | gcc doesn't report warnings for final methods since version 9.2: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78010 Change-Id: I7152351aac0e3bad86d777e119f25137ef97ec6f Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Kai Koehne <kai.koehne@qt.io>
* Fix race in QFseventsFileSystemWatcher destructorErik Verbruggen2020-07-241-6/+8
| | | | | | | | | | | | | | | | | | | | | | The race goes like this: 1) We destruct QFseventsFileSystemWatcher, which calls FSEventStreamStop and FSEventStreamInvalidate/FSEventStreamRelease 2) The FSEvent* calls will happen on the same thread as the destructor is being called on, which will be different to the thread that the FSEvent* events are popping out on. 3) So, there could be a case where we are in the middle of processing an event, but the QFseventsFileSystemWatcher has already died. The fix is to dispatch the stop/invalidate/release on the queue associated with the stream. Patch by Matt Galloway! Fixes: QTBUG-85594 Pick-to: 5.15 5.12 Change-Id: Ie168bbe91e55c5559632b37bc008e11597e4fdaf Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* Fix buffer overflow in XBM parserAllan Sandfeld Jensen2020-07-242-1/+41
| | | | | | | | | | | | | Avoid parsing over the buffer limit, or interpreting non-hex as hex. This still leaves parsing of lines longer than 300 chars unreliable Change-Id: I1c57a7e530c4380f6f9040b2ec729ccd7dc7a5fb Pick-to: 5.15 5.12 Reviewed-by: Robert Loehning <robert.loehning@qt.io> Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
* Fix a number of qdoc warnings related to deprecationFriedemann Kleint2020-07-2418-923/+6
| | | | | | | Remove obsolete documentation. Change-Id: Iaf4b6f9852a883dea0f256c5c89e74f6ebbe85f3 Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
* QMetaType: force properties to have a complete type againFabian Kosmale2020-07-242-6/+27
| | | | | | | | | | | | | | When the compile time metatype support for methods was introduced, we needed to allow incomplete types to avoid breaking a large amount of code. However, this mistakenly enabled using incomplete types for properties, too. In contrast to methods, properties lack the fallback code to retrieve the metatype at runtime. Thus, this commit restores the completeness requirement for properties again. This is done by always calling QMetaTypeForType for properties in qTryMetaTypeForType. Amends fa987d44417528856d5e80ed7b48ba99e19fa307 Change-Id: I5f66ff289631c056eecebe40926bf321d283eea7 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* testlib: Add start time and test duration to JUnit XMLTor Arne Vestbø2020-07-2455-363/+386
| | | | | | | As defined by https://llg.cubic.org/docs/junit/ Change-Id: Ic7683f3d49c529674f8467d591528d4a65d3add8 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
* testlib: Output JUnitXML attributes in right orderTor Arne Vestbø2020-07-2453-3242/+3247
| | | | | | | | | | | | | | | | | | The attributes are, like the elements, maintained in reverse order in the underlying QTestCoreList, so we need to iterate them backwards when printing out the resulting XML to reflect the order they were added. This results in e.g.: <testcase name="passingBenchmark" result="pass"> Instead of: <testcase result="pass" name="passingBenchmark"> Change-Id: Ic2eeab8de05ffedd0c41977358d5b40ff77878b1 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
* SecureTransport: Set requested ciphers specified in the configurationAndy Shaw2020-07-242-0/+95
| | | | | | Fixes: QTBUG-83491 Change-Id: I783a355be5405d4c44e703874bdf2e14afe629e1 Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
* QLineEdit: Fix cursor drawing issuesLu YaNing2020-07-232-1/+3
| | | | | | | | | | | | | | | | Entering Chinese in some fonts in an English environment causes the cursor drawing coordinates to exceed the updated coordinates, leaving behind stale pixels at the top. Keep the refresh and draw area calculation methods the same when rendering the contents in QLineEdit::paintEvent, and when calculating the update area in QLineEditPrivate::adjustedControlRect. Fixes: QTBUG-85569 Pick-to: 5.15 Change-Id: I978cb56f24f961086b1271e56d07ad1ced16f8ff Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* QWindowsFontDatabaseBase: Fix unused parameter errorKai Koehne2020-07-231-0/+2
| | | | | Change-Id: Ifa2cc45c1bf4326a1273a713e3db950846d2ca14 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
* Avoid enabling of "warnings_are_errors" flags for testsAlexander Volkov2020-07-231-1/+1
| | | | | | | | Change added dep in qt_add_cmake_library(): PlarformModuleInternal -> PlatformCommonInternal. Change-Id: I303a6a520f0dda7260b12cb21673b8f1a23d536b Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* testlib selftest: Actually report failures as non-zero exit codeTor Arne Vestbø2020-07-231-0/+2
| | | | | | | Palm, meet face. Change-Id: I01cd4088c8f43f7fe66398c27f5d8333468620ad Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* QSslSocket::flush - purge the function marked for removal in Qt6Timur Pocheptsov2020-07-232-20/+0
| | | | | | | | | QAbstractSocket::flush stopped being virtual and, instead, QAbstractSocketPrivate::flush is now virtual. So the code in QSslSocket is essentially a duplicate. Change-Id: Iebb33c8490268270b90a662ab64b1ae47c4cbac7 Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com> Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
* testlib selftest: Don't pass TESTARGS to Catch2Tor Arne Vestbø2020-07-234-4/+9
| | | | | | | It doesn't understand the arguments we usually pass to testlib. Change-Id: Iea83d1d8c31a510b2bc442cbfc810eac631322e7 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* QLogging: purge deprecated qInstallMsgHandler(QtMsgHandler)Edward Welbourne2020-07-235-95/+3
| | | | | | | | Deprecated since 5.0. Renamed a function in a manual test that no longer needs to say it's Qt5-specific. Change-Id: I6f2159c702f389d378a0e4d86bd4fe633298b100 Reviewed-by: Kai Koehne <kai.koehne@qt.io>
* QLocale: purge deprecated APIEdward Welbourne2020-07-232-43/+0
| | | | | | | | Since 5.15 - toTime() with a calendar in the argument list The calendar was never used. Change-Id: I37897d47b42e69d1a8312e6389d6349febb889ae Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Remove reference to removed moduleEirik Aavitsland2020-07-231-3/+0
| | | | | | | The openglextensions module is dicontinued and removed in Qt 6. Change-Id: I0b98f9b6575026828c188786aeb5c1a62de1f8a3 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Multiply instead of shiftingRobert Loehning2020-07-231-1/+1
| | | | | | | | | The shift operator is undefined for negative values. Fixes: oss-fuzz-23735 Pick-to: 5.15 5.12 Change-Id: Ib4bad0bf2135f9ddc95f6d7de64d935a02b4791e Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
* tst_QGraphicsSceneIndex::clear: Don't assume only one repaintTor Arne Vestbø2020-07-231-1/+1
| | | | | | Change-Id: I037b51ebad525ced536945b2c39b0f59280e6bad Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-10 03:50:36 +0000