summaryrefslogtreecommitdiffstats
path: root/tests
Commit message (Collapse)AuthorAgeFilesLines
* Fix warning from shadowing virtual functionVolker Hilsheimer2020-09-171-20/+11
| | | | | | | QToolButton::initStyleOption is const. Apply some DRY while at it. Change-Id: If29a52e828bbc2aa58df2852c4c434545acfef3e Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
* Fix deprecation warnings in testsVolker Hilsheimer2020-09-173-16/+16
| | | | | | | | Adjust to changes to QIcon::pixmap, QMetaType::type, and QAbstractItemView::itemDelegate. Change-Id: I9eb0331ef899131afc86c33f27feeee76331ffc8 Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* CMake Build: Add qtnetwork docker testserver supportCristian Adam2020-09-1711-0/+11
| | | | | | | | | | | | | | | qt_add_test supports now QT_TEST_SERVER_LIST, which will add the test servers as docker test fixtures. The docker server will be started before the test is run, and stopped after the test is run. Running the tests in parallel is not supported. Docker tests are currently only supported on Linux hosts. Task-number: QTBUG-85034 Change-Id: If3cefe05c5dec19c14b05d2fa8b01a0b6d95e259 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Normalize roundingAllan Sandfeld Jensen2020-09-162-1/+2
| | | | | | | | Change the rounding of negative half values to match standard C++ round, this will also allow future optimizations. Change-Id: I8f8c71bed1f05891e82ea787c6bc284297de9c5c Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QEventDispatcherWin32: create internal window on constructionAlex Trotsenko2020-09-162-0/+43
| | | | | | | | | | | | | | | | | When QCoreApplication object is instantiated, creation of the internal message window is delayed until QEventDispatcherWin32::processEvents() is called or socket/event notifier is registered. But, if the user uses a native event loop, posted events are not delivered and timers do not work. This problem was fixed in a4ac4b326318ed9034466305222280ed8d1651b5 for QWindowsGuiEventDispatcher in the same way. So, the risk of regression is minimal. Change-Id: I7bbb721d96046f64d21a7b0e553e46798b37189c Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
* Mouse->touch synthesis: send touch event with mouse deviceShawn Rutledge2020-09-161-1/+19
| | | | | | | | | | | In 4e400369c08db251cd489fec1229398c224d02b4 we began to send synth-mouse events from the touch device, but in the opposite direction it was not consistent. Add autotests to prove that it's consistent both ways now. Change-Id: I7df2328fef224dc1529ca5d27411cd8a5a9c8df9 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* Calculate velocity in QMutEventPoint::setTimestamp() with Kalman filterShawn Rutledge2020-09-162-1/+101
| | | | | | | | | | | | | | This functionality was only in Qt Quick in Qt 5. Now we move it up to QtGui so that every QEventPoint will have a valid velocity() before being delivered anywhere. [ChangeLog][QtGui][QPointerEvent] Every QEventPoint should now carry a valid velocity(): if the operating system doesn't provide it, Qt will calculate it, using a simple Kalman filter to provide a weighted average over time. Fixes: QTBUG-33891 Change-Id: I40352f717f0ad6edd87cf71ef55e955a591eeea1 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* Track grab state in QPointingDevicePrivate::activePointsShawn Rutledge2020-09-164-37/+190
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QQuickEventPoint instances were very long-lived and got reused from one event to the next. That was initially done because they were "heavy" QObjects; but it also became useful to store state in them between events. But this is in conflict with the ubiquitous event replay code that assumes it's OK to hold an event instance (especially a QMouseEvent) for any length of time, and then send it to some widget, item or window. Clearly QEventPoints must be stored in the QPointerEvent, if we are to avoid the need for workarounds to keep such old code working. And now they have d-pointers, so copying is cheap. But replay code will need to detach() their QEventPoints now. QEventPoint is useful as an object to hold state, but we now store the truly persistent state separately in an EventPointData struct, in QPointingDevicePrivate::activePoints. Incoming events merely update the persistent points, then we deliver those instead. Thus when event handler code modifies state, it will be remembered even when the delivery is done and the QPA event is destroyed. This gets us a step closer to supporting multiple simultaneous mice. Within pointer events, the points are moved up to QPointerEvent itself: QList<QEventPoint> m_points; This means pointCount(), point(int i) and points() can be non-virtual. However in any QSinglePointEvent, the list only contains one point. We hope that pessimization is worthwhile for the sake of removing virtual functions, simplifying code in event classes themselves, and enabling the use of the range-for loop over points() with any kind of QPointerEvent, not just QTouchEvent. points() is a nicer API for the sake of range-for looping; but point() is more suited to being non-const. In QML it's expected to be OK to emit a signal with a QPointerEvent by value: that will involve copying the event. But QEventPoint instances are explicitly shared, so calling setAccepted() modifies the instance in activePoints (EventPointData.eventPoint.d->accept); and the grabbers are stored separately and thus preserved between events. In code such as MouseArea { onPressed: mouse.accepted = false } we can either continue to emit the QQuickMouseEvent wrapper or perhaps QEvent::setAccepted() could become virtual and set the eventpoint's accepted flag instead, so that it will survive after the event copy that QML sees is discarded. The grabChanged() signal is useful to keep QQuickWindow informed when items or handlers change exclusive or passive grabbers. When a release happens at a different location than the last move event, Qt synthesizes an additional move. But it would be "boring" if QEventPoint::lastXPosition() accessors in any released eventpoint always returned the same as the current QEventPoint::xPosition()s just because of that; and it would mean that the velocity() must always be zero on release, which would make it hard to use the final velocity to drive an animation. So now we expect the lastPositions to be different than current positions in a released eventpoint. De-inline some functions whose implementations might be subject to change later on. Improve documentation. Since we have an accessor for pressTimestamp(), we might as well add one for timestamp() too. That way users get enough information to calculate instantaneous velocity, since the plan is for velocity() to be somewhat smoothed. Change-Id: I2733d847139a1b1bea33c00275459dcd2a145ffc Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* Use qint64 for value of that type in tst_QDateTime millisecond testsEdward Welbourne2020-09-151-71/+91
| | | | | | | | | | | | The test was previously using int; I shall be wanting to add tests that exercise the bounds of qint64. Clean up the layout of the test-row additions in the process of making a trivial change to them all. Also const the QFETCH() types so we catch any use of non-const methods on the values fetched. Change-Id: I4b0187de71f5f14b39b4eabe8afd12a196f73d23 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Fix tst_QElapsedTimer::elapsed() flaky testJarek Kobus2020-09-151-11/+23
| | | | | | | | | | | | | | | Instead of using imprecise QTest::qSleep() to estimate the elapsed time, we trigger a single shot PreciseTimer and gather all the data in lambda. We wait for lambda to be executed - we give it twice as much time as is in theory needed. Afterwards we verify all the data collected in lambda. Task-number: QTBUG-82903 Change-Id: I0147b7cd2aaf4bf58a216caff167d2db8712541a Reviewed-by: Andrei Golubev <andrei.golubev@qt.io> Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io> Reviewed-by: Edward Welbourne <edward.welbourne@qt.io> Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
* CMake: Fix building with -DQT_FEATURE_gui=OFFAlex Richardson2020-09-1525-34/+166
| | | | | | | | | | Some CMake files currently assume that QtGui is always enabled and we get a configure-time failure without these changes. Task-number: QTBUG-86053 Change-Id: I28e32c180c32221f32519017bac6b518a19d5983 Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io> Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
* Fix tests to build in a no-widgets configurationAlexandru Croitor2020-09-152-5/+8
| | | | | | | | | | | | The qfilesystemmodel.pro was recently moved to the gui tests subfolder, but it uses widgets inside. Skip it in a no-widgets build. Amends fb9ec8ad44decba7b2878370f3711b61614f035a Task-number: QTBUG-86187 Change-Id: I955556ffddad483d4c25602ae126b8c2433091b2 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io> Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
* Add a QMetaAssociationUlf Hermann2020-09-152-27/+288
| | | | | | | | | | This requires refactoring of QMetaSequence, as they share a lot of common functionality. QMetaAssociation provides a low level interface to an associative container. Task-number: QTBUG-81716 Change-Id: I273e00abd82f1549ba8803c323d82aa3a2d12ded Reviewed-by: Lars Knoll <lars.knoll@qt.io>
* QStyleSheetStyle: Fix push button hit testing with paddingVolker Hilsheimer2020-09-151-2/+8
| | | | | | | | | | | | | Amends f9940b15f7f0fde731431626172939b9821fd660, which amended 6e1d70ae12baae4610356ec7b69635ad75a97b4e. The bevel of the button is not defined by the contentsRect, but by the borderRect that the stylesheet style calculates. Change-Id: I9a0d5bf29a06ce2270014f0d144e33cc3a1a7473 Pick-to: 5.15 Fixes: QTBUG-86587 Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
* Tests: fix json test for AndroidAssam Boudjelthia2020-09-152-3/+2
| | | | | | | | | test.bjon file doesn't exist, however, it's still included in json.qrc. That causes the test to fail on Android because it's using that resource file. Change-Id: I1e93076069073a1a621459a7d90aec5c0c03f768 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Tests: fix qlogging build fail for AndroidAssam Boudjelthia2020-09-151-7/+6
| | | | | | | | | The macro BACKTRACE_HELPER_NAME is defined inside a block with #ifdef __GLIBC__ which is not defined on Android, thus causing the test to fail on Android. Change-Id: I55e9b3e3bae2da182481239ad88107c36e3bd438 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Blacklist tst_QTimeLine::interpolation on Windows in generalMitch Curtis2020-09-151-1/+1
| | | | | | Task-number: QTBUG-61037 Change-Id: Ie44c7355e2aefbbd16cef95f1a093302bd789e45 Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
* Use UTF-8 when converting 8 bit data in QTextStreamLars Knoll2020-09-152-3/+11
| | | | | | | | | This was overlooked when doing the conversion to use UTF-8 as the standard 8 bit encoding for text. Fixes: QTBUG-54942 Change-Id: Ib7b1b75b4d694648ab7143f6930b6bb1dcad19c9 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Remove deprecated APILars Knoll2020-09-151-4/+4
| | | | | | | And replace it's few remaining usages Change-Id: I2dfbbaa5259acfece028606bef1e872c5692f9fe Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
* Remove the SAX parser from QtXmlLars Knoll2020-09-15789-6263/+0
| | | | | | | | It has been deprecated and will live in qt5compat from now on. Fixes: QTBUG-86480 Change-Id: I3744c7cee058d51d0fce633a174ab1a0f9235d2c Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
* Trim trailing 0s from QTime construction, where neither use nor ornamentEdward Welbourne2020-09-151-153/+153
| | | | | | | | The seconds and milliseconds default to 0; so omit them when they're zero, unless there's nearby code that contrasts nicely with them. Change-Id: Iea049015e976f5a5209fe87a2cbfdae9de49a559 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* Add qHash implementation for QPointMitch Curtis2020-09-152-5/+3
| | | | | | | | | [ChangeLog][QtCore][QPoint] Added qHash() implementation. Change-Id: I65332e7aafab53af40a6e11457b9b457196d584c Fixes: QTBUG-86457 Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Switch QSurfaceFormat::colorSpace to a QColorSpaceAllan Sandfeld Jensen2020-09-151-1/+1
| | | | | | | Allows more flexibility in the future. Change-Id: Idcf2d8ddaee268a7b5d55379ccb42dd9b3c33abf Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* Schannel: Properly handle request for certificateMårten Nordheim2020-09-141-8/+0
| | | | | | | | | | | | | | Certain servers, like smtp.live.com, will send a request for a certificate even though they don't require one. In Schannel this manifests as a warning/info status (SEC_I_INCOMPLETE_CREDENTIALS). In the cases where it's not needed we should suppress the warning and try to connect anyway, which is done by calling InitializeSecurityContext again when we get the status. Pick-to: 5.15 Change-Id: I3c48140f2949d8557251a49a2b66946da9395736 Reviewed-by: Joshua GPBeta <studiocghibli@gmail.com> Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
* Purge Q_{STDLIB,COMPILER}_UNICODE_STRINGSEdward Welbourne2020-09-146-44/+4
| | | | | | | | | These were now always defined, hence redundant. Leave the #define in place so that we can verify we actually do always define it, in a #else of an existing #if check on it. Change-Id: Iea4c3dbc8f9982268bcf81da5ef17fe2ebf5c462 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Don't use default-constructed QTime() where QTime(0, 0) is intendedEdward Welbourne2020-09-141-35/+43
| | | | | | | | | | QTime() is invalid. Only the seconds and milliseconds are optional, for valid times. Use startOfDay() for zoned times, QTime(0, 0) for fixed-offset ones. Change-Id: I3b65d5c3733ac83dc3a6c214859c3f56a480bb94 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Remove some unused private methods and replace anotherEdward Welbourne2020-09-141-90/+90
| | | | | | | | | | | | | Nothing used defDateTime(), nothing but it used defTime(). The only other use of defDate() were from one test, which might as well make it a local variable. QDateTime's default is invalid, making invalidDateTime() redundant, and the invalidDate() and invalidTime() it called had no other users. Change-Id: I0e07ee58478bfe8ba680eafb52e2f73a962edd33 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Fix compiler warnings about missing overridesLars Knoll2020-09-1323-140/+154
| | | | | Change-Id: I52bf9fe45607f4a99cafa441bd78dfe5f7adb0e1 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Interbase: Handle EXECUTE BLOCK statements correctlyAndy Shaw2020-09-131-0/+22
| | | | | | | | | | | | Since an EXECUTE BLOCK statement can have a mix of ? and :var syntax then a special case for this needs to be added so that it does not try to convert the :var parts into positional placeholders as they need to kept as-is when preparing such a statement. Pick-to: 5.15 Fixes: QTBUG-83152 Change-Id: Iff891207ad6dea1681a1b3a335acbbbb668b465d Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
* Rename QLibraryInfo::location() to path()Lars Knoll2020-09-1211-16/+16
| | | | | | | | As per ### Qt6 comment. Also rename the LibraryLocation enum to LibraryPath. Change-Id: I556025a19c5bcdf2ff52598eaba32269522d4128 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Remap QMetaType ids to create more space for builtin typesLars Knoll2020-09-121-1/+1
| | | | | | | | | | | We were starting to run out of space for builtin core types. Remap the type id's to create lots of additional space. We now reserve the first 64k id's for Qt, and have 16k id's for Qt Core. That should hopfully be enough for a while ;-) Fixes: QTBUG-85914 Change-Id: I0dab6bf23652e46a9557d9b38af7990b68c572b6 Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
* cmake: Re-enable qcoreapplication and qtimer testsTor Arne Vestbø2020-09-124-2/+95
| | | | | | | | They were disabled in ad0e3e26fabe0574889c5cf3a26a145a7f5d9c98, but that was probably accidental. Change-Id: Ia9cbccfbeecfe84768c3465f5699ed44b7f932a5 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Provide methods for adding values to a sequential iterableUlf Hermann2020-09-122-9/+22
| | | | | | | | | | | Provide functionality to add and remove values, so that you can use a sequential iterable as stack or queue if the underlying container supports this. To this end, provide a way to specify whether the value should be added or removed at the beginning or the end of the iterable. Change-Id: If63d302f3ca085e56d601116ce4dfaa6b94a0c4f Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
* QMetaContainer: Add an "input" iterator capabilityUlf Hermann2020-09-121-2/+4
| | | | | | | | | For completeness' sake we should expose this. The iterators provided by QIterable and friends will check the category at runtime, and should give sensible feedback. Change-Id: I778894f340c862f79a18c6c5607bcbba98dd7598 Reviewed-by: Lars Knoll <lars.knoll@qt.io>
* QSsl: workaround a 'very secure' OpenSSL version (CentOS 8.x et al)Timur Pocheptsov2020-09-124-1/+32
| | | | | | | | | | | | | CentOS it seems not only backported some OpenSSL 3 functions, but also raised the default security level to 2, making some of our keys (and MDs?) 'too weak' and failing auto-tests here and there as a result. For our auto-test we lower the level to 1, as it is expected to be. Fixes: QTBUG-86336 Pick-to: 5.15 Change-Id: I7062a1b292e8b60eb9c2b2e82bd002f09f9da603 Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
* Replace qreal with float in QColorAllan Sandfeld Jensen2020-09-112-79/+79
| | | | | | | | There is no reason to use double precision for colors. We at most have 16 significant bits anyway. Change-Id: I8b402cd978675b8ba7248176976d934363212ff1 Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
* [QtCore] Fix QDateTime unit test: time zone of system was usedAndreas Buhr2020-09-111-10/+9
| | | | | | | | | | | | | | | | Test data for QDateTime unit tests was constructed in system's local time, which made unit test outcome dependent on the time zone of the system running the tests. This led to failing unit tests on systems with libc6 version 2.31 or newer. A QDateTime in a timezone, which has daylight saving time, was created and then used in Hawaii's time zone,which has no daylight saving time. Newer glibc checks this and returns errors. This patch changes the behavior to create the test data in a specified time zone setting. Task-number: QTBUG-80441 Change-Id: I0330b647fa011be99141dde09001ff2d58bd3a5f Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
* Fix warnings coming from using the deprecated overload of qCheckSumLars Knoll2020-09-112-3/+3
| | | | | | | Change-Id: I719c2d56a690fd245d3917045de4005f118c688b Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io> Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io> Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
* Revert "Remove timeStep parameter from QAnimationDrive::advanceAnimation"Lars Knoll2020-09-111-2/+2
| | | | | | | | | | This reverts commit f51b690e91bb2d7c8a03c5cef42abca37d97f8bb. The commit made all animation tests in qtdeclarative on macOS flaky. Change-Id: I4ccaa879df7e2ba7e253657de01cbabc9b2c655f Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* QAuthenticator: condition using GSSAPI on credentials availabilityMårten Nordheim2020-09-111-3/+3
| | | | | | | | | | | | AFAICT with GSSAPI the normal workflow is to run kinit or similar and authenticate before running programs relying on it. Therefore we can try to get the credentials before we choose whether or not to use Negotiate. Pick-to: 5.15 Task-number: QTBUG-85123 Change-Id: If0478fdd45389b2939ad87c2f582776fe56959bb Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
* Rename QMetaSequence's "elements" to "values"Ulf Hermann2020-09-112-45/+45
| | | | | | | | | | This is so that they are in line with the "value_type" usually found in containers. Associative containers have "key_type" and "mapped_type" and we will use those names for access to elements in QMetaAssociation. Using "value" as name for sequential containers improves consistency. Change-Id: I628b7e1446bb2d56843b843bca72d279a6b247e6 Reviewed-by: Lars Knoll <lars.knoll@qt.io>
* tst_QNetworkReply: Avoid race in ioGetFromHttpWithAuthMårten Nordheim2020-09-111-1/+5
| | | | | | | | | | | | | | | | | | | | | Our authentication code is race-y by design: 1. When two requests are fired off and queued at the same time in the same QHttpNetworkConnection then if one of them encounters "authentication required" then it will copy whatever credentials it got to all the other channels in the connection. This is likely what the first part of the test is testing. 2. If a later request is fired off and it includes credentials in the url then the newly included credentials should be used instead of the cached ones. The race here can occurr when one socket either takes too long to connect or the connected signal is not received early enough. Then the first socket is used for both requests and then we can hit case #2 when the url contains credentials. Pick-to: 5.15 Change-Id: I646a5378d8c1256b2de98b51912953df29f68cb2 Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
* Interbase: Add support for the boolean typeAndy Shaw2020-09-112-4/+9
| | | | | | | | | | | | | This is added to Interbase in v7 and Firebird in v3 which has been available for sometime now. This means the minimum supported for Interbase is now v7. [ChangeLog][QtSQL][Interbase] The minimum required version for Interbase is now v7. Fixes: QTBUG-83401 Change-Id: I9927fd962f25c935be8ed5d2b7c76c00fb88cd8c Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
* macos: Rename macos style to macOSRichard Moe Gustavsen2020-09-111-1/+1
| | | | | | | | | This change shouldn't matter much to widgets, since style names there are case insensitive. But for controls style names are case sensitive, and in that case, "macOS" looks more correct. Change-Id: Ia1d442bce465692ff58fecba1cc68ecbb2e52549 Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* [QtCore] QDateTime: switch from newRow to addRow in unit testsAndreas Buhr2020-09-111-4/+4
| | | | | | | | | Instead of doing string formating first and then using QTest::newRow, we can do both at the same time using QTest::addRow Change-Id: Ia5c90eb705a806e37b96a1fa174a6557f91bee6d Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
* [QtCore] Adapt QDateTime unit tests to use QByteArrayAndreas Buhr2020-09-111-8/+8
| | | | | | | | | | | To not have to bother with encodings, a few QStrings are changed to QByteArrays. This way, a few calls to QString::fromLatin1 and to QString::toLocal8Bit can be removed Change-Id: Ia0cf27fc2a86f9842ed0f3ebe47b050bb8a3f4e6 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
* Remove most compiler warnings about missing overridesLars Knoll2020-09-11151-772/+808
| | | | | | | | | | | | Remove around 1000 compiler warnings about missing overrides in our auto tests. This significantly reduce the compiler warning noise in our auto tests, so that one can actually better see the real problems inbetween. Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9 Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* tst_QTimer::remainingTime(): get rid of QTest::currentTestFailed()Jarek Kobus2020-09-101-8/+11
| | | | | | | | | | | | | Looks this is redundant in fact and unneeded. The check can never be evaluated to true, since if so, it would mean it had failed in the previous iteration, in which we already handled the exit from the loop. Fixed also some comments. Task-number: QTBUG-83419 Change-Id: I4fe56bfac39cd58b1166967f3ccb80cdff882748 Reviewed-by: Andrei Golubev <andrei.golubev@qt.io> Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
* QNAM: Enable HTTP/2 by defaultMårten Nordheim2020-09-101-1/+0
| | | | | | | | | | | | | | | It has been in Qt for some years now and 6.0 marks a good point to enable it by default. The exception is connectToHostEncrypted where we still require the users to enable it explicitly since there's no logical way to disable it. [ChangeLog][QtNetwork][QNetworkAccessManager] HTTP/2 is now enabled by default. Fixes: QTBUG-85902 Change-Id: Ia029a045727cc593d77df9eb3a5888522ad19199 Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
* Introduce QProcess::startCommand(QString, OpenMode)Joerg Bornemann2020-09-101-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The removal of the QProcess::start(QString, OpenMode) leads to more porting work than anticipated. A call like QProcess p; p.start(cmdline); must be transformed in the following cumbersome way: QProcess p; QStringList args = QProcess::splitCommand(cmdline); QString program = args.takeFirst(); p.start(program, args); This patch revives QProcess::start(QString, OpenMode) and renames it to QProcess::startCommand. This is still source-incompatible, but the transformation is much simpler: QProcess p; p.startCommand(cmdline); [ChangeLog][QtCore][QProcess] Added QProcess::startCommand(QString, OpenMode) as replacement for the removed QProcess::start(QString, OpenMode). Change-Id: I5499bbb39a025e115042c43a4cc63affddae585c Reviewed-by: hjk <hjk@qt.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-04 10:54:17 +0000