path: root/src/doc/src
diff options
authorSamuli Piippo <>2015-09-14 14:04:17 +0300
committerSamuli Piippo <>2015-09-15 05:56:35 +0000
commitebfff89fe5d050b95ae5e2e8aca86a2763ec1169 (patch)
tree583017a97ab0650df1792c7ed037cd5508bcb59e /src/doc/src
parent05a7886e8610fbc33c0b3131f9fe60d4df7993f8 (diff)
doc: add documentation for Kontron SMARC-sAMX6i
Change-Id: I7a43b8c67a9b87c6e0f49c62fc60c6d7a2ae56b2 Reviewed-by: Topi Reiniö <>
Diffstat (limited to 'src/doc/src')
4 files changed, 109 insertions, 0 deletions
diff --git a/src/doc/src/devices/qtee-kontron-smarc-samx6i.qdoc b/src/doc/src/devices/qtee-kontron-smarc-samx6i.qdoc
new file mode 100644
index 0000000..670ce51
--- /dev/null
+++ b/src/doc/src/devices/qtee-kontron-smarc-samx6i.qdoc
@@ -0,0 +1,88 @@
+** Copyright (C) 2014 Digia Plc
+** All rights reserved.
+** For any questions to Digia, please use the contact form at
+** This file is part of Qt Enterprise Embedded.
+** Licensees holding valid Qt Enterprise licenses may use this file in
+** accordance with the Qt Enterprise License Agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.
+** If you have questions regarding the use of this file, please use
+** the contact form at
+ \target Kontron SMARC-sAMX6i (embedded Linux)
+ \page qtee-preparing-hardware-smarc-samx6i.html
+ \title Preparing Kontron SMARC-sAMX6i
+ \previouspage qtee-installation-guide.html
+ Take the following steps to prepare a
+ \l{}
+ {Kontron SMARC-sAMX6i} for \B2Q.
+ \note It is important that you repeat the steps in this section after you
+ update \SDK.
+ The images containing the \B2Q stack for Kontron SMARC-sAMX6i are included
+ in \SDK, ready to be copied to an SD card.
+ \section1 Preparing an SD Card
+ An SD card of at least 1 GB capacity is sufficient.
+ \include detect-sd-card-device-name.qdocinc instructions
+ \section1 Installing the \B2Q Image
+ \include common.qdocinc wizard
+ To write the image to the SD card, ensure that no partitions on the
+ SD card are mounted:
+ \include detect-sd-card-device-name.qdocinc unmount
+ Then,
+ \badcode
+ sudo 5.5/Boot2Qt/apalis-imx6-eLinux/images/ /dev/<device_name>
+ \endcode
+ By default, the Kontron SMARC-sAMX6i boots from its internal eMMC. In order to boot from
+ the external SD card, the U-Boot environment needs to be updated. Connect a serial cable
+ to the device and enter into the U-Boot environment by pressing any key before the autoboot.
+ Enter following commands into U-Boot:
+ \badcode
+ setenv mmcdev 1
+ setenv mmcpart 2
+ setenv bootcmd 'mmc dev ${mmcdev}; if mmc rescan; then if run loadfdt; then if run loaduimage; then run mmcboot; else run netboot; fi; else run netboot; fi; else run netboot; fi;'
+ setenv uimage /boot/uImage
+ setenv fdtfile /boot/imx6q-smx6-lcd.dtb
+ setenv mmcroot /dev/mmcblk0p2 rootwait rw
+ setenv mmcargs 'setenv bootargs video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24 fbmem=28M console=${console},${baudrate} root=${mmcroot}'
+ saveenv
+ \endcode
+ New U-Boot commands are now stored into the device, and you can start \B2Q.
+ After the image has been deployed, insert the SD card, power on the device and check that
+ the \B2Q welcome screen and/or demo appear.
+ \section1 Setting up USB Access
+ \include b2qt-post-install-setup.qdocinc setting up usb access
+ \section1 Configuring a Device Kit in Qt Creator
+ \include b2qt-post-install-setup.qdocinc configuring device kit
+ You are now ready to start developing for your device. For more information,
+ see \l{Building and Running an Example}.
diff --git a/src/doc/src/devices/qtee-supported-devices.qdoc b/src/doc/src/devices/qtee-supported-devices.qdoc
index fd829cf..1c9f07d 100644
--- a/src/doc/src/devices/qtee-supported-devices.qdoc
+++ b/src/doc/src/devices/qtee-supported-devices.qdoc
@@ -35,6 +35,7 @@
\li \l{Toradex Colibri iMX6 (embedded Linux)}
\li \l{Toradex Colibri VF50 and VF61 (embedded Linux)}
\li \l{ArchiTech Tibidabo (embedded Linux)}
+ \li \l{Kontron SMARC-sAMX6i (embedded Linux)}
\li \l{BeagleBone Black (embedded Linux)}
\li \l{Raspberry Pi 2 Model B (embedded Linux)}
@@ -160,6 +161,11 @@
256MB (single core), 512MB (dual core) DDR3, 4GB eMMC,\br
Vivante 2D/3D GPU
\li \image ok
+ \row \li \l{}
+ {Kontron SMARC-sAMX6i}\br
+ Freescale® i.MX 6 ARM Cortex™-A9 @800MHz - 1.2GHz,\br
+ 2GB DDR3, 2-64GB eMMC, Vivante GC2000 GPU
+ \li \image ok
\row \li \l{}
{Raspberry Pi 2 Model B}\br
900 Mhz ARM Cortex™-A7, Broadcom VideoCore IV\br
@@ -296,6 +302,17 @@
\li \image ok
\li \image ok
+ \row \li Kontron SMARC-sAMX6i
+ \li \image ok
+ \li \image ok
+ \li \image ok
+ \li \image ok
+ \li \image ok
+ \li \image ok
+ \li \image ok
+ \li \image ok
+ \li \image ok
+ \li
\row \li Raspberry Pi 2
\li \image ok
\li \image ok
diff --git a/src/doc/src/qtee-custom-embedded-linux.qdoc b/src/doc/src/qtee-custom-embedded-linux.qdoc
index df156bd..9aad678 100644
--- a/src/doc/src/qtee-custom-embedded-linux.qdoc
+++ b/src/doc/src/qtee-custom-embedded-linux.qdoc
@@ -132,6 +132,9 @@
\li SILICA ArchiTech Tibidabo
\li tibidabo
+ \li Kontron SMARC-sAMX6i
+ \li smarc-smax6i
+ \row
\li Emulator
\li emulator
diff --git a/src/doc/src/qtee-index.qdoc b/src/doc/src/qtee-index.qdoc
index d04ec7f..1439576 100644
--- a/src/doc/src/qtee-index.qdoc
+++ b/src/doc/src/qtee-index.qdoc
@@ -51,6 +51,7 @@
\li \l{Preparing Toradex Colibri iMX6}{Toradex Colibri iMX6 (embedded Linux)}
\li \l{Preparing Toradex Colibri VF50 and VF61}{Toradex Colibri VF50 and VF61 (embedded Linux)}
\li \l{Preparing ArchiTech Tibidabo}{ArchiTech Tibidabo (embedded Linux)}
+ \li \l{Preparing Kontron SMARC-sAMX6i}{Kontron SMARC-sAMX6i (embedded Linux)}
\li \l{Preparing BeagleBone Black}{BeagleBone Black (embedded Linux)}
\li \l{Preparing Raspberry Pi 2}{Raspberry Pi 2 Model B (embedded Linux)}